Download or read book Platinum Monolayer Electrocatalysts written by Radoslav Adzic and published by Springer. This book was released on 2021-08-13 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a science and technology of a new type of electrocatalysts consisting of a single atomic layer of platinum on suitable supports. This development helped overcome three major obstacles—catalysts‘ cost, activity, and stability—for a broad range of fuel cell applications. The volume begins with a short introduction to the science of electrocatalysis, covering four reactions important for energy conversion in fuel cells. A description follows of the properties of metal monolayers on electrode surfaces, and underpotential deposition of metals. The authors then describe the concept of Pt monolayer electrocatalysts and its implications and their synthesis by galvanic displacement of less-noble metal monolayers and other methods. The main part of the book presents a discussion of catalysts’ characterization and catalytic properties of Pt monolayers for the four main reactions of electrochemical energy conversion: oxygen reduction and oxidation of hydrogen, methanol and ethanol. The book concludes with a treatment of scale-up syntheses, fuel cell tests, catalysts’ stability and application prospects.
Download or read book Voltammetric and NMR Studies of the Electrochemical Oxidation of Methanol on Platinum Nanoparticles written by Patrick Brian McGrath and published by . This book was released on 2007 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book PEM Fuel Cell Electrocatalysts and Catalyst Layers written by Jiujun Zhang and published by Springer Science & Business Media. This book was released on 2008-08-26 with total page 1147 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proton exchange membrane (PEM) fuel cells are promising clean energy converting devices with high efficiency and low to zero emissions. Such power sources can be used in transportation, stationary, portable and micro power applications. The key components of these fuel cells are catalysts and catalyst layers. “PEM Fuel Cell Electrocatalysts and Catalyst Layers” provides a comprehensive, in-depth survey of the field, presented by internationally renowned fuel cell scientists. The opening chapters introduce the fundamentals of electrochemical theory and fuel cell catalysis. Later chapters investigate the synthesis, characterization, and activity validation of PEM fuel cell catalysts. Further chapters describe in detail the integration of the electrocatalyst/catalyst layers into the fuel cell, and their performance validation. Researchers and engineers in the fuel cell industry will find this book a valuable resource, as will students of electrochemical engineering and catalyst synthesis.
Download or read book 5th European Symposium on Electrochemical Engineering written by A. A. Wragg and published by IChemE. This book was released on 1999 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Aspects of Electrochemical Engineering is the main theme of this symposium. It charts the way ahead for the future development and economic viability of all types of electrochemical processing.
Download or read book Direct Methanol Fuel Cell Technology written by Kingshuk Dutta and published by Elsevier. This book was released on 2020-02-25 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: Direct Methanol Fuel Cell Technology presents the overall progress witnessed in the field of DMFC over the past decade, highlighting the components, materials, functions, properties and features, designs and configurations, operations, modelling, applications, pros and cons, social, political and market penetration, economics and future directions. The book discusses every single aspect of DMFC device technology, the associated advantages and drawbacks of state-of-the-art materials and design, market opportunities and commercialization aspects, and possible future directions of research and development. This book, containing critical analyses and opinions from experts around the world, will garner considerable interest among actual users/scientists/experts. - Analyzes developments of membrane electrolytes, electrodes, catalysts, catalyst supports, bipolar plates, gas diffusion layers and flow channels as critical components of direct methanol fuel cells - Includes modeling of direct methanol fuel cells to understand their scaling up potentials - Discusses commercial aspects of direct methanol fuel cells in terms of market penetration, end application, cost, viability, reliability, social and commercial perception, drawbacks and prospects
Download or read book Design Construction and Research Application of a Differential Electrochemical Mass Spectrometer DEMS written by Sean James Ashton and published by Springer Science & Business Media. This book was released on 2012-07-11 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sean Ashton's doctoral thesis, which he finished at the Technical University in Munich, describes the challenge of constructing a Differential Electrochemical Mass Spectrometer instrument (DEMS). DEMS combines an electrochemical cell with mass spectrometry via a membrane interface, allowing gaseous and volatile electrochemical reaction species to be monitored online. The thesis carefully introduces the fuel cell electrocatalyst development concerns before reviewing the pertinent literature on DEMS. This is followed by the presentation and discussion of the new extended design, including a thorough characterization of the instrument. The capabilities of the new setup are demonstrated in two research studies: The methanol oxidation reaction on Pt and PtRu catalysts, and the electrochemical corrosion of fuel cell catalyst supports. Despite both topics having long since been studied, new insights can be obtained through careful investigations with the new DEMS instrument that are of great, general interest. The thesis and the instrument thus show the way for future investigations in the field.
Download or read book Proceedings of the Sixth International Symposium on Electrode Processes written by Andrzej Więckowski and published by The Electrochemical Society. This book was released on 1996 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Direct Anodic Oxidation of Methanol on Supported Platinum ruthenium Catalyst in Aqueous Cesium Carbornate written by Bruce Robert Rauhe and published by . This book was released on 1992 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Catalysis and Electrocatalysis at Nanoparticle Surfaces written by Andrzej Wieckowski and published by CRC Press. This book was released on 2003-02-19 with total page 970 pages. Available in PDF, EPUB and Kindle. Book excerpt: Illustrating developments in electrochemical nanotechnology, heterogeneous catalysis, surface science and theoretical modelling, this reference describes the manipulation, characterization, control, and application of nanoparticles for enhanced catalytic activity and selectivity. It also offers experimental and synthetic strategies in nanoscale surface science. This standard-setting work clariefies several practical methods used to control the size, shape, crystal structure, and composition of nanoparticles; simulate metal-support interactions; predict nanoparticle behavior; enhance catalytic rates in gas phases; and examine catalytic functions on wet and dry surfaces.
Download or read book Self Organization in Electrochemical Systems I written by Marek Orlik and published by Springer Science & Business Media. This book was released on 2012-09-08 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first of two volumes offering the very first comprehensive treatise of self-organization and non-linear dynamics in electrochemical systems. The second volume covers spatiotemporal patterns and the control of chaos. The content of both volumes is organized so that each description of a particular electrochemical system is preceded by an introduction to basic concepts of nonlinear dynamics, in order to help the reader unfamiliar with this discipline to understand at least fundamental concepts and the methods of stability analysis. The presentation of the systems is not limited to laboratory models but stretches out to real-life objects and processes, including systems of biological importance, such as neurons in living matter. Marek Orlik presents a comprehensive and consistent survey of the field.
Download or read book Electrocatalysis Computational Experimental and Industrial Aspects written by Carlos Fernando Zinola and published by CRC Press. This book was released on 2010-03-25 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrocatalysis applications are employed in a large number of industries worldwide, ranging from old technologies such as galvanoplasty to the most up-to-date deployments involving ultracapacitators. Recognizing electrocatalysis as a useful interfacial approach to a dynamic interdisciplinary science, Electrocatalysis: Computational, Experimental,
Download or read book Interfacial Electrochemistry written by Andrzej Wieckowski and published by Routledge. This book was released on 2017-11-22 with total page 992 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text probes topics and reviews progress in interfacial electrochemistry. It supplies chapter abstracts to give readers a concise overview of individual subjects and there are more than 1500 drawings, photographs, micrographs, tables and equations. The 118 contributors are international scholars who present theory, experimentation and applications.
Download or read book Fuel Cell Catalysis written by Andrzej Wieckowski and published by John Wiley & Sons. This book was released on 2009-04-01 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wiley Series on Electrocatalysis and Electrochemistry Fuel Cell Catalysis A Surface Science Approach A Core reference on fuel cell catalysis Fuel cells represent an important alternative energy source and a very active area of research. Fuel Cell Catalysis brings together world leaders in this field, providing a unique combination of state-of-the-art theory and computational and experimental methods. With an emphasis on understanding fuel cell catalysis at the molecular level, this text covers fundamental principles, future challenges, and important current research themes. Fuel Cell Catalysis: Provides a molecular-level description of catalysis for low-temperature polymer-electrolyte membrane fuel cells, including both hydrogen-oxygen cells and direct alcohol cells Examines catalysis issues of both anode and cathode such as oxygen reduction, alcohol oxidation, and CO tolerance Features a timely and forward-looking approach through emphasis on novel aspects such as computation and bio-inspiration Reviews the use and potential of surface-sensitive techniques like vibrational spectroscopy (IR, Raman, nonlinear spectroscopy, laser), scanning tunneling microscopy, X-ray scattering, NMR, electrochemical techniques, and more Reviews the use and potential of such modern computational techniques as DFT, ab initio MD, kinetic Monte Carlo simulations, and more Surveys important trends in reactivity and structure sensitivity, nanoparticles, "dynamic" catalysis, electrocatalysis vs. gas-phase catalysis, new experimental techniques, and nontraditional catalysts This cutting-edge collection offers a core reference for electrochemists, electrocatalysis researchers, surface and physical chemists, chemical and automotive engineers, and researchers in academia, research institutes, and industry.
Download or read book Electrocatalysts for Low Temperature Fuel Cells written by Thandavarayan Maiyalagan and published by John Wiley & Sons. This book was released on 2017-05-08 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: Meeting the need for a text on solutions to conditions which have so far been a drawback for this important and trend-setting technology, this monograph places special emphasis on novel, alternative catalysts of low temperature fuel cells. Comprehensive in its coverage, the text discusses not only the electrochemical, mechanistic, and material scientific background, but also provides extensive chapters on the design and fabrication of electrocatalysts. A valuable resource aimed at multidisciplinary audiences in the fields of academia and industry.
Download or read book New and Future Developments in Catalysis written by Steven L Suib and published by Newnes. This book was released on 2013-07-11 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: New and Future Developments in Catalysis is a package of seven books that compile the latest ideas concerning alternate and renewable energy sources and the role that catalysis plays in converting new renewable feedstock into biofuels and biochemicals. Both homogeneous and heterogeneous catalysts and catalytic processes will be discussed in a unified and comprehensive approach. There will be extensive cross-referencing within all volumes.Batteries and fuel cells are considered to be environmentally friendly devices for storage and production of electricity, and they are gaining considerable attention. The preparation of the feed for fuel cells (fuel) as well as the catalysts and the various conversion processes taking place in these devices are covered in this volume, together with the catalytic processes for hydrogen generation and storage. An economic analysis of the various processes is also part of this volume and enables an informed choice of the most suitable process. - Offers in-depth coverage of all catalytic topics of current interest and outlines future challenges and research areas - A clear and visual description of all parameters and conditions, enabling the reader to draw conclusions for a particular case - Outlines the catalytic processes applicable to energy generation and design of green processes
Download or read book Extended Abstracts written by Electrochemical Society and published by . This book was released on 1992 with total page 918 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Direct Alcohol Fuel Cells written by Horacio R. Corti and published by Springer Science & Business Media. This book was released on 2013-12-02 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: Direct Alcohol Fuel Cells: Materials, Performance, Durability and Applications begins with an introductory overview of direct alcohol fuel cells (DAFC); it focuses on the main goals and challenges in the areas of materials development, performance, and commercialization. The preparation and the properties of the anodic catalysts used for the oxidation of methanol, higher alcohols, and alcohol tolerant cathodes are then described. The membranes used as proton conductors in DAFC are examined, as well as alkaline membranes, focusing on the electrical conductivity and alcohol permeability. The use of different kinds of carbon materials as catalyst supports, gas diffusion layers, and current collectors in DAFC is also discussed. State of the art of the modeling is used to estimate performance and durability. The closing chapter reviews the use of DAFC in portable equipment and mobile devices and features a detailed discussion on the mechanisms of component degradation which limits their durability. This book is written to facilitate the understanding of DAFC technology, applications, and future challenges. It is an excellent introduction for electrochemical and material engineers interested in small fuel cells as portable energy sources, scientists focused on materials science for energy production and storage, as well as policy-makers in the area of renewable energies.
