Download or read book Gemini Surfactants written by Raoul Zana and published by CRC Press. This book was released on 2003-10-07 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Generating much interest in both academic and scientific circles, Gemini Surfactants gathers the most up-to-date research in gemini surfactantproduction and demonstrates how their propertiesand performance can revolutionize the current industrial application of these surfactants. It surveys the state of special gemini surfactants, including nonionic, zwitterionic, fluorinated, and amino-acid-based surfactants. Gemini Surfactants considers the synthesis, phase behavior, and rheology of gemini and related surfactants and clarifies the adsorption and surface tension behavior of gemini surfactants at air–water, oil–water, and solid–water interfaces. The book also details the physicochemical properties and microstructure of aqueous micellar solutions of gemini surfactants and describes mixed micellization between gemini surfactants and conventional surfactants.

Download or read book Oilfield Chemistry and its Environmental Impact written by Henry A. Craddock and published by John Wiley & Sons. This book was released on 2018-08-06 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Consolidates the many different chemistries being employed to provide environmentally acceptable products through the upstream oil and gas industry This book discusses the development and application of green chemistry in the oil and gas exploration and production industry over the last 25 years — bringing together the various chemistries that are utilised for creating suitable environmental products. Written by a highly respected consultant to the oil and gas industry — it introduces readers to the principles and development of green chemistry in general, and the regulatory framework specific to the oil and gas sector in the North Sea area and elsewhere in the world. It also explores economic drivers pertaining to the application of green chemistry in the sector. Topics covered in Oilfield Chemistry and its Environmental Impact include polymer chemistry, surfactants and amphiphiles, phosphorus chemistry, inorganic salts, low molecular weight organics, silicon chemistry and green solvents. It also looks at sustainability in an extractive industry, examining the approaches used and the other methodologies that could be applied in the development of better chemistries, along with discussions about where the application of green chemistry is leading in this industry sector. Provides the reader with a ready source of reference when considering what chemistries are appropriate for application to oilfield problems and looking for green chemistry solutions Brings together the pertinent regulations which workers in the field will find useful, alongside the chemistries which meet the regulatory requirements Written by a well-known specialist with a combined knowledge of chemistry, manufacturing procedures and environmental issues Oilfield Chemistry and its Environmental Impact is an excellent book for oil and gas industry professionals as well as scientists, academic researchers, students and policy makers.

Download or read book Oilfield Chemistry written by Caili Dai and published by Springer. This book was released on 2019-01-18 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides comprehensive information on the youngest member of the petroleum sciences family: Oilfield Chemistry, proposes the chemical agents for addressing current problems, and explains the functions, mechanisms and synergistic effects of various chemical agents

Download or read book Microemulsions written by Monzer Fanun and published by CRC Press. This book was released on 2008-12-15 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effective use of microemulsions has increased dramatically during the past few decades as major industrial applications have expanded in a variety of fields. Microemulsions: Properties and Applications provides a complete and systematic assessment of all topics affecting microemulsion performance and discusses the fundamental characteristics, t

Download or read book Proceedings of the International Petroleum and Petrochemical Technology Conference 2019 written by Jia'en Lin and published by Springer Nature. This book was released on 2019-12-16 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a compilation of selected papers from the 3rd International Petroleum and Petrochemical Technology Conference (IPPTC 2019). The work focuses on petroleum & petrochemical technologies and practical challenges in the field. It creates a platform to bridge the knowledge gap between China and the world. The conference not only provides a platform to exchanges experience but also promotes the development of scientific research in petroleum & petrochemical technologies. The book will benefit a broad readership, including industry experts, researchers, educators, senior engineers and managers.

Download or read book Petroleum Engineer s Guide to Oil Field Chemicals and Fluids written by Johannes Fink and published by Gulf Professional Publishing. This book was released on 2011-05-13 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum Engineer's Guide to Oil Field Chemicals and Fluids is a comprehensive manual that provides end users with information about oil field chemicals, such as drilling muds, corrosion and scale inhibitors, gelling agents and bacterial control. This book is an extension and update of Oil Field Chemicals published in 2003, and it presents a compilation of materials from literature and patents, arranged according to applications and the way a typical job is practiced. The text is composed of 23 chapters that cover oil field chemicals arranged according to their use. Each chapter follows a uniform template, starting with a brief overview of the chemical followed by reviews, monomers, polymerization, and fabrication. The different aspects of application, including safety and environmental impacts, for each chemical are also discussed throughout the chapters. The text also includes handy indices for trade names, acronyms and chemicals. Petroleum, production, drilling, completion, and operations engineers and managers will find this book invaluable for project management and production. Non-experts and students in petroleum engineering will also find this reference useful. - Chemicals are ordered by use including drilling muds, corrosion inhibitors, and bacteria control - Includes cutting edge chemicals and polymers such as water soluble polymers and viscosity control - Handy index of chemical substances as well as a general chemical index

Download or read book Well Completion Design written by Jonathan Bellarby and published by Elsevier. This book was released on 2009-04-13 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completions are the conduit between hydrocarbon reservoirs and surface facilities. They are a fundamental part of any hydrocarbon field development project. The have to be designed for safely maximising the hydrocarbon recovery from the well and may have to last for many years under ever changing conditions. Issues include: connection with the reservoir rock, avoiding sand production, selecting the correct interval, pumps and other forms of artificial lift, safety and integrity, equipment selection and installation and future well interventions. - Course book based on course well completion design by TRACS International - Unique in its field: Coverage of offshore, subsea, and landbased completions in all of the major hydrocarbon basins of the world - Full colour

Download or read book Improved Oil Recovery by Surfactant and Polymer Flooding written by D.O. Shah and published by Elsevier. This book was released on 2012-12-02 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: Improved Oil Recovery by Surfactant and Polymer Flooding contains papers presented at the 1976 AIChE Symposium on Improved Oil Recovery by Surfactant and Polymer Flooding held in Kansas City. Organized into 18 chapters, the book includes papers that introduce petroleum reservoirs and discuss interfacial tension; molecular forces; molecular aspects of ultralow interfacial tension; the structure, formation, and phase inversion of microemulsions; and thermodynamics of micellization and related phenomena. Papers on adsorption phenomena at solid/liquid interfaces and reservoir rocks, as well as on flow through porous media studies on polymer solutions, microemulsions, and soluble oils are also provided. Significant topics on molecular, microscopic, and macroscopic aspects of oil displacement in porous media by surfactant and polymer solutions and related phenomena are also discussed. The literature cited in this book forms a comprehensive list of references in relation to improved oil recovery by surfactant and polymer flooding. This book will be useful to experts and non-experts in this field of research.

Download or read book Chemistry and Technology of Surfactants written by Richard J. Farn and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surfactants are used throughout industry as components in a hugerange of formulated products or as effect chemicals in theproduction or processing of other materials. A detailedunderstanding of the basis of their activity is required by allthose who use surfactants, yet the new graduate or postgraduatechemist or chemical engineer will generally have little or noexperience of how and why surfactants work. Chemistry & Technology of Surfactants is aimed at newgraduate or postgraduate level chemists and chemical engineers atthe beginning their industrial careers and those in later life whobecome involved with surfactants for the first time. The book is astraightforward and practical survey of the chemistry ofsurfactants and their uses, providing a basic introduction tosurfactant theory, information on the various types of surfactantand some application details. This will allow readers to build ontotheir scientific education the concepts and principles on which thesuccessful use of surfactants, across a wide range of industries,is based.

Download or read book Sand Control in Well Construction and Operation written by Davorin Matanovic and published by Springer Science & Business Media. This book was released on 2012-02-21 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: Produced sand causes a lot of problems. From that reasons sand production must be monitored and kept within acceptable limits. Sand control problems in wells result from improper completion techniques or changes in reservoir properties. The idea is to provide support to the formation to prevent movement under stresses resulting from fluid flow from reservoir to well bore. That means that sand control often result with reduced well production. Control of sand production is achieved by: reducing drag forces (the cheapest and most effective method), mechanical sand bridging (screens, gravel packs) and increasing of formation strength (chemical consolidation). For open hole completions or with un-cemented slotted liners/screens sand failure will occur and must be predicted. Main problem is plugging. To combat well failures due to plugging and sand breakthrough Water-Packing or Shunt-Packing are used.

Download or read book Production Chemicals for the Oil and Gas Industry written by Malcolm A. Kelland and published by CRC Press. This book was released on 2014-03-13 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text discusses a wide variety of production chemicals used by the oil and gas industry for down-hole and topside applications both onshore and offshore. It reviews all past and present classes of production chemicals, providing numerous difficult-to-obtain references. Unlike other texts that focus on how products perform in the field, this book focuses on the specific structures of chemicals that are known to deliver the required or desired performance. Where known, it also details the environmental aspects of the chemicals discussed and their success in the field.

Download or read book Acid Stimulation written by Carl T. Montgomery and published by . This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive and up-to-the-minute presentation on acid stimulation technology.

Download or read book Emulsions Foams and Suspensions written by Laurier L. Schramm and published by John Wiley & Sons. This book was released on 2006-05-12 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until now colloid science books have either been theoretical, or focused on specific types of dispersion, or on specific applications. This then is the first book to provide an integrated introduction to the nature, formation and occurrence, stability, propagation, and uses of the most common types of colloidal dispersion in the process-related industries. The primary focus is on the applications of the principles, paying attention to practical processes and problems. This is done both as part of the treatment of the fundamentals, where appropriate, and also in the separate sections devoted to specific kinds of industries. Throughout, the treatment is integrated, with the principles of colloid and interface science common to each dispersion type presented for each major physical property class, followed by separate treatments of features unique to emulsions, foams, or suspensions. The first half of the book introduces the fundamental principles, introducing readers to suspension formation and stability, characterization, and flow properties, emphasizing practical aspects throughout. The following chapters discuss a wide range of industrial applications and examples, serving to emphasize the different methodologies that have been successfully applied. Overall, the book shows how to approach making emulsions, foams, and suspensions with different useful properties, how to propagate them, and how to prevent their formation or destabilize them if necessary. The author assumes no prior knowledge of colloid chemistry and, with its glossary of key terms, complete cross-referencing and indexing, this is a must-have for graduate and professional scientists and engineers who may encounter or use emulsions, foams, or suspensions, or combinations thereof, whether in process design, industrial production, or in related R&D fields.

Download or read book Chemical Enhanced Oil Recovery written by Patrizio Raffa and published by Walter de Gruyter GmbH & Co KG. This book was released on 2019-07-22 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims at presenting, describing, and summarizing the latest advances in polymer flooding regarding the chemical synthesis of the EOR agents and the numerical simulation of compositional models in porous media, including a description of the possible applications of nanotechnology acting as a booster of traditional chemical EOR processes. A large part of the world economy depends nowadays on non-renewable energy sources, most of them of fossil origin. Though the search for and the development of newer, greener, and more sustainable sources have been going on for the last decades, humanity is still fossil-fuel dependent. Primary and secondary oil recovery techniques merely produce up to a half of the Original Oil In Place. Enhanced Oil Recovery (EOR) processes are aimed at further increasing this value. Among these, chemical EOR techniques (including polymer flooding) present a great potential in low- and medium-viscosity oilfields. • Describes recent advances in chemical enhanced oil recovery. • Contains detailed description of polymer flooding and nanotechnology as promising boosting tools for EOR. • Includes both experimental and theoretical studies. About the Authors Patrizio Raffa is Assistant Professor at the University of Groningen. He focuses on design and synthesis of new polymeric materials optimized for industrial applications such as EOR, coatings and smart materials. He (co)authored about 40 articles in peer reviewed journals. Pablo Druetta works as lecturer at the University of Groningen (RUG) and as engineering consultant. He received his Ph.D. from RUG in 2018 and has been teaching at a graduate level for 15 years. His research focus lies on computational fluid dynamics (CFD).

Download or read book Computational and Experimental Simulations in Engineering written by Hiroshi Okada and published by Springer Nature. This book was released on 2019-11-16 with total page 1278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the latest advances, innovations, and applications in the field of computational engineering, as presented by leading international researchers and engineers at the 24th International Conference on Computational & Experimental Engineering and Sciences (ICCES), held in Tokyo, Japan on March 25-28, 2019. ICCES covers all aspects of applied sciences and engineering: theoretical, analytical, computational, and experimental studies and solutions of problems in the physical, chemical, biological, mechanical, electrical, and mathematical sciences. As such, the book discusses highly diverse topics, including composites; bioengineering & biomechanics; geotechnical engineering; offshore & arctic engineering; multi-scale & multi-physics fluid engineering; structural integrity & longevity; materials design & simulation; and computer modeling methods in engineering. The contributions, which were selected by means of a rigorous international peer-review process, highlight numerous exciting ideas that will spur novel research directions and foster multidisciplinary collaborations.

Download or read book Formation Damage during Improved Oil Recovery written by Bin Yuan and published by Gulf Professional Publishing. This book was released on 2018-06-02 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Formation Damage during Improved Oil Recovery: Fundamentals and Applications bridges the gap between theoretical knowledge and field practice by presenting information on formation damage issues that arise during enhanced oil recovery. Multi-contributed technical chapters include sections on modeling and simulation, lab experiments, field case studies, and newly proposed technologies and methods that are related to formation damage during secondary and tertiary recovery processes in both conventional and unconventional reservoirs. Focusing on both the fundamental theories related to EOR and formation damage, this reference helps engineers formulate integrated and systematic designs for applying EOR processes while also considering formation damage issues.

Download or read book Microbicides for the Protection of Materials written by W. Paulus and published by Springer Science & Business Media. This book was released on 1993-09-30 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is chiefly intended for those who are using microbicides for the protection of materials. Another purpose is to inform teachers and students working on biodeterioration and to show today's technical standard to those engaged in R&D activities in the microbicide field. When trying to classify, or to subclassify, material-protecting microbicides according to their mode of action, e.g. as membrane-active and electrophilic active ingredients, it turned out that a clear assignment was not always possible. For that reason the author has resorted to chemistry's principle of classifying according to groups of substances (e.g. alcohols, aldehydes, ketones, acids, esters, amides, etc.), thus providing the first necessary information about the micro bicides' properties. The description of the various groups of substances includes, whenever possible, an outline of the mode and mechanism of action of the active ingredients involved. The effective use of microbicides presupposes knowledge of their character istics. That is why the microbicides' chemico-physical properties, their toxicity, ecotoxicity, effectiveness, and effective spectrum are described in greater detail. As mentioned before, the characteristics of microbicides play an important role. They have to be suited to the intended application to avoid detrimental effects on the properties and the quality of the material to be protected; also production processes in which microbicides are used to avoid disturbances by microbial action must not be disturbed by the presence of those microbicides.