Download or read book Terahertz Quantum Cascade Lasers for Astronomical Applications written by Dana Turcinkova and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Spectroscopic Applications of Terahertz Quantum Cascade Lasers written by Tasmim Alam and published by Cuvillier Verlag. This book was released on 2020-10-29 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quantum cascade lasers (QCLs) are attractive for high-resolution spectroscopy because they can provide high power and a narrow linewidth. They are particularly promising in the terahertz (THz) range since they can be used as local oscillators for heterodyne detection as well as transmitters for direct detection. However, THz QCL-based technologies are still under development and are limited by the lack of frequency tunability as well as the frequency and output power stability for free-running operation. In this dissertation, frequency tuning and linewidth of THz QCLs are studied in detail by using rotational spectroscopic features of molecular species. In molecular spectroscopy, the Doppler eff ect broadens the spectral lines of molecules in the gas phase at thermal equilibrium. Saturated absorption spectroscopy has been performed that allows for sub-Doppler resolution of the spectral features. One possible application is QCL frequency stabilization based on the Lamb dip. Since the tunability of the emission frequency is an essential requirement to use THz QCL for high-resolution spectroscopy, a new method has been developed that relies on near-infrared (NIR) optical excitation of the QCL rear-facet. A wide tuning range has been achieved by using this approach. The scheme is straightforward to implement, and the approach can be readily applied to a large class of THz QCLs. The frequency and output stability of the local oscillator has a direct impact on the performance and consistency of the heterodyne spectroscopy. A technique has been developed for a simultaneous stabilization of the frequency and output power by taking advantage of the frequency and power regulation by NIR excitation. The results presented in this thesis will enable the routine use of THz QCLs for spectroscopic applications in the near future.

Download or read book THz Quantum Cascade Lasers written by Partia Naghibi Mahmoudabadi and published by . This book was released on 2013 with total page 93 pages. Available in PDF, EPUB and Kindle. Book excerpt: The terahertz region of electromagnetic wave spectrum spanning from 300 GHz to 10 THz (the transition from electronics to photonics) has recently attracted considerable attention based on its numerous applications in different fields. Quantum cascade lasers (QCLs) have been developed in the past ten years as important sources of terahertz radiation. However, there still remain challenges to overcome such as room-temperature operation, efficient out-coupled power and directive radiative beam pattern. Achieving these goals will make THz QCLs very special sources of light to be utilized in broad range of applications in astronomy, biology, medical imaging, etc. This research tackles the aforementioned challenges in two sections. First, it targets the room-temperature issue by focusing on active region engineering and utilizing GaN/AlGaN quantum wells instead of the conventional GaAs/AlGaAs heterostructure QCLs. Second, it introduces a novel approach in waveguide engineering by harnessing the transmission line theory in order to improve the out-coupled power and radiation beam pattern.

Download or read book Terahertz Quantum cascade Lasers for Spectroscopic Applications written by Benjamin Malte Röben and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Quantum Cascade Lasers QCLs written by Joseph D. Bennett and published by Nova Science Publishers. This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quantum cascade lasers (QCLs) are unipolar devices with lasing occurring through transitions between quantised energy levels within the conduction band. When compared to conventional lasers (e.g. gas, liquid or solid state lasers), these new optoelectronic devices present a fundamental advantage that resides in their ability to tailor the wavelength of the emitted light via the layer thickness rather than the band gap. This book discusses different types and applications of quantum cascade lasers.

Download or read book Mid Infrared and Terahertz Quantum Cascade Lasers written by Dan Botez and published by Cambridge University Press. This book was released on 2023-09-14 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn how the rapidly expanding area of mid-infrared and terahertz photonics has been revolutionized in this comprehensive overview. State-of-the-art practical applications are supported by real-life examples and expert guidance. Also featuring fundamental theory enabling you to improve performance of both existing and future devices.

Download or read book Optimization of a Quantum Cascade Laser Operating in the Terahertz Frequency Range Using a Multiobjective Evolutionary Algorithm written by Traci A. Keller and published by . This book was released on 2004-06-01 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: A quantum cascade (QC) laser is a specific type of semiconductor laser that operates through principles of quantum mechanics. In less than a decade QC lasers are already able to outperform previously designed double heterostructure semiconductor lasers. Because there is a genuine lack of compact and coherent devices which can operate in the far-infrared region the motivation exists for designing a terahertz QC laser. A device operating at this frequency is expected to be more efficient and cost effective than currently existing devices. It has potential applications in the fields of spectroscopy, astronomy, medicine and free-space communication as well as applications to near-space radar and chemical/biological detection. The overarching goal of this research was to find QC laser parameter combinations which can be used to fabricate viable structures. To ensure operation in the THz region the device must conform to the extremely small energy level spacing range from Æ10-15 meV. The time and expense of the design and production process is prohibitive, so an alternative to fabrication was necessary. To accomplish this goal a model of a QC laser, developed at Worchester Polytechnic Institute with sponsorship from the Air Force Research Laboratory Sensors Directorate, and the General Multiobjective Parallel Genetic Algorithm (GenMOP), developed at the Air Force Institute of Technology, were integrated to form a computer simulation which stochastically searches for feasible solutions.

Download or read book The Development and Applications of Terahertz Quantum Cascade Lasers written by Raed Hussain S. Alhathlool and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Physics and Applications of Terahertz Radiation written by Matteo Perenzoni and published by Springer. This book was released on 2013-10-16 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the latest advances in the techniques employed to manage the THz radiation and its potential uses. It has been subdivided in three sections: THz Detectors, THz Sources, Systems and Applications. These three sections will allow the reader to be introduced in a logical way to the physics problems of sensing and generation of the terahertz radiation, the implementation of these devices into systems including other components and finally the exploitation of the equipment for real applications in some different field. All of the sections and chapters can be individually addressed in order to deepen the understanding of a single topic without the need to read the whole book. The THz Detectors section will address the latest developments in detection devices based on three different physical principles: photodetection, thermal power detection, rectification. The THz Sources section will describe three completely different generation methods, operating in three separate scales: quantum cascade lasers, free electron lasers and non-linear optical generation. The Systems and Applications section will take care of introducing many of the aspects needed to move from a device to an equipment perspective: control of terahertz radiation, its use in imaging or in spectroscopy, potential uses in security, and will address also safety issues. The text book is at a level appropriate to graduate level courses up to researchers in the field who require a reference book covering all aspects of terahertz technology.

Download or read book Novel Applications of Terahertz Quantum Cascade Lasers written by Binbin Wei and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Terahertz Sources and Systems written by R.E. Miles and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Terahertz technology has moved on from being a useful but expensive circuit technique, applied largely in astronomy and space science, to become a subject in its own right, with important applications - terahertz imaging in particular. Indeed, the driving force in terahertz technology is currently imaging and spectroscopy. We now have the means to obtain images and chemical information in this frequency band. The images reproduced in this volume are striking and, not surprisingly, the clinical and analytical uses are the subject of intense activity. There is still, however, no complete range of active THz electronic components, but an encouraging conclusion of the book is that THz electronics will become necessary in communications systems in the foreseeable future. Terahertz technology has come of age, and the future lies open to new, exciting science and vital applications.

Download or read book From High Power Terahertz Quantum Cascade Lasers to Terahertz Light Amplifiers written by Tsung-Yu Kao and published by . This book was released on 2014 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: The terahertz (THz) frequency range (300 GHz to 10 THz, wavelength 30-1000 [mu]m), despite having many potential applications, is technologically relatively underdeveloped mainly because of the lack of suitable coherent radiation sources when compared with nearby electromagnetic radiation spectrum. The invention of the THz quantum cascade laser, a electronically-pumped semiconductor heterostructure which emits photons from electronic intersubband transitions, provides the first solidstate fundamental oscillator at the frequency range from 1.2 to 5.1 THz. Due to the subwavelength confinement nature of the metal-metal waveguide used in most of the THz QC lasers, far-field beam patterns from lasers with simple Fabry-Perot waveguides are divergent and far from ideal Gaussian beams. The first part of this thesis describes the development of single-mode THz QC lasers on metal-metal waveguides. Starting with the corrugated third-order DFB laser-a clever laser structure which utilizes end-fire array effect to achieve low divergence beam patterns-several applications using densely-packed third-order DFB laser arrays, such as frequency agile sources for THz swept-source optical tomography and local oscillators for THz heterodyne receivers with precise frequency control, have been investigated. With the improved design rules and fabrication techniques, 830 GHz single-mode frequency coverage on a monolithic multicolor DFB laser array has been achieved. The origin of the deterioration in far-field beam patterns and power outputs in long third-order DFB lasers is then identified. This finding leads to a modified third-order DFB laser structure which can achieve perfect phase-matching (PM) condition, resulting in scalable power output and even lower beam divergence when compared with that of a conventional third-order DFB laser. Radiations from up to 151 laser sectors are phase-locked to form a single-lobe beam pattern with divergence ~ 6 x 11° and ~13 mW pulsed power at the end-fire direction. This approach substantially increases the usable length of a third-order DFB laser while keeping a high slope efficiency (140 mW/A). Later development applies the concept of microstrip antenna-a structure commonly used in microwave engineering-to THz photonics devices. By coupling the microstrip antenna to each grating aperture of a perfectly phase-matched DFB laser, the radiation impedance of the laser can now be tuned to enhance the overall emission efficiency. This novel genre of DFB laser achieves > 8 mW pulsed power (10% duty-cycle) at 12 K with beam divergence as low as 12.5 x 12.5' and maximum lasing temperature Tmax = 109 K (pulsed) and 77 K (c.w.) with the highest slope efficiency (~450 mW/A) and wall-plug efficiency (0.57%) of all THz DFB laser sources. The second part of the thesis then focuses on the development of the first light amplifier in THz frequency under Fabry-Perot amplifier (FPA) scheme. Although amplification at terahertz frequency in quantum cascade structures has been demonstrated under the transient state or in a integrated platform, none of them is suitable for amplifying continuous-wave free-space THz radiations. The proposed amplifier is consisted of an array of short-cavity surface-emitting second-order distributed feedback lasers arranged in a two-dimensional grid which are operated marginally beneath their lasing thresholds. A overall system power gain of ~5.6x = 7.5 dB at ~3 THz is obtained with ~1 GHz bandwidth. The free-space THz light amplifier can be used as the pre-amplifier for a THz heterodyne receiver system to reduce the receiver system noise, or be placed on the focal plane of a THz imaging system to enhance the signal-to-noise ratio of the image and reduce the acquisition time. A new locking mechanism for two-dimensional phase-locked laser arrays based on antenna mutual-coupling is also proposed and then successfully demonstrated in the THz frequency using short-cavity DFB THz lasers. Up to 37 lasers are phase-locked to deliver 6.5 mW single-mode pulsed power (4% duty-cycle) at 3 THz with symmetric beam pattern ( 10 x 10°). This new coupling scheme can be extended to other electromagnetic systems with sub-wavelength confined elements such as plasmonic lasers and nanolasers. This thesis also reports the development of fabrication techniques required to bring the aforementioned novel THz cavity designs from concepts to reality which include a high aspect ratio ( 1:10) anisotropic reactive-ion etch on GaAs which is compatible with the metal-metal waveguide platform and the procedure to create airbridge structures by selectively removing the dielectric materials beneath the metal contacts.

Download or read book Towards Room temperature Terahertz Quantum Cascade Lasers written by Chun Wang Ivan Chan and published by . This book was released on 2015 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Terahertz Quantum Cascade Lasers (THz QCLs) are arguably the most promising technology today for the compact, efficient generation of THz radiation. Their main limitation is that they require cryogenic cooling, which dominates their ownership cost. Therefore, achieving room-temperature operation is essential for the widespread adoption of THz QCLs. This thesis analyzes the limitations of THz QCL maximum lasing temperature (Tmax) and proposes solutions. THz QCL Tmax is hypothesized to be limited by a fundamental trade-off between gain oscillator strength ful and upper-level lifetime [Tau]. This so-called "ful[Tau] tradeoff" is shown to explain the failure of designs which target [Tau] alone. A solution is proposed in the form of highly diagonal (low ful) active region design coupled with increased doping. Experimental results indicate the strategy to be promising, but heavily doped designs are shown to suffer band-bending effects which may deteriorate performance. In order to treat these band-bending effects, which are typically neglected in previous THz QCL designs, a fast transport simulation tool is developed. Scattering integrals are simplified using the assumption of thermalized sub bands. Results comparable to ensemble Monte Carlo are achieved at a fraction of the computational expense. Carrier leakages to continuum states are also investigated, although they are found to have little effect. Other work in this thesis includes the optimization of double-metal THz waveguides to enable Tmax ~ 200 K, a current world record. Furthermore, laser designs to investigate the leakages of carriers to high-energy subbands and continuum states were fabricated and tested; such parasitic leakages are suggested to be small. Finally, the design of gain media for applications is examined, notably the development of 4.7 THz gain media for OI line detection in astrophysics, and the development of broadband heterogeneous gain media for THz comb generation.

Download or read book Towards Actively Mode locked Terahertz Quantum cascade VECSELs written by Yu Wu and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The invention of optical frequency combs generated by mode-locked lasers revolutionized time and frequency metrology in the late 1990s. This concept has been explored in several laser systems; the quantum cascade laser (QCL) is one such system that operates in the terahertz (THz) frequency range.THz QCL was first invented in 2001 as a reliable semiconductor source for compact, high-power THz radiation. The inherently strong third-order nonlinearity in its QC-gain medium allows for spontaneous frequency comb formation as a result of spatial hole burning induced by Fabry-Perot cavities and four-wave mixing, which synchronizes the dispersed cavity modes. It was noticed that the self-generated combs are naturally frequency-modulated with quasi-continuous power output, whereas amplitude-modulated combs, i.e., mode-locking, are considered challenging in THz QCLs because of the inherent fast gain recovery time. One effective method to trigger active mode-locking is RF injection locking. It involves injecting RF current modulation into the QC-device at a frequency that is close to the cavity round-trip frequency. This locks the spacing between adjacent lasing modes, and pulses with a duration of 4-5 ps have been reported. In recent years, the study of frequency comb/mode-locking in THz QCLs has raised increasing interest because of its potential for a number of applications, including astronomy, biomedicine, fast spectroscopy, non-invasive imaging, and non-destructive evaluation. So far, research has concentrated on ridge-waveguide and ring QCLs. On the other hand, THz quantum-cascade vertical-external-cavity surface-emitting-laser (QC-VECSEL) was introduced in 2015 as a novel external cavity configuration of THz QCLs.The key concept of THz QC-VECSEL is to engineer its gain chip into a millimeter-scale reflectarray metasurface for free-space THz radiation and further incorporation into a resonant laser cavity as an active reflector. This enables watt-level output power with near-Gaussian distributed beam quality; versatile functionality may be incorporated into the amplifying metasurface; and broadband frequency tunability is provided by the VECSEL architecture. Despite the fact that VECSELs are widely used for mode-locking at near-infrared and optical frequencies, THz QC-VECSELs have not yet been exploited in frequency comb and mode-locking applications. In this thesis, we report for the first time the techniques utilized to achieve frequency comb/mode-locking operations in THz QC-VECSELs. Both the metasurface design and VECSEL cavity geometry are optimized for this purpose. The double-patch metasurface design is considered optimal for broadband frequency response and low dispersion, and a well-designed RF package is needed for efficient RF signal injection and extraction. On the other hand, an off-axis parabolic (OAP) mirror is introduced to build a V-shaped intra-cryostat focusing VECSEL cavity. This OAP-focusing cavity design eliminates most of the intra-cavity diffraction losses and, therefore, enables lasing in an ultra-long external cavity using a small-sized metasurface that supports continuous wave (CW) biasing. It is highly suited for frequency comb/mode-locking applications as the cavity round-trip frequency is lowered to a typical value of 3-5 GHz. In contrast to ridge-waveguide or ring QCLs, self-generated frequency combs have not been observed in THz QC-VECSELs --- in fact, they prefer to lase in a single-mode regime primarily due to a lack of spatial hole burning.To promote multimode operation in THz QC-VECSELs, we present a technique based on a specific combination of output coupler thickness and external cavity length. Through Vernier selection and reflectance compensation in a cascaded Fabry-Perot cavity, we are able to perform simultaneous nine modes lasing with a free-spectral range (FSR) of ~21 GHz. The number of lasing modes that can be generated using this method is limited by the maximum available output coupler thickness. A more effective way to promote multimoding, as well as possible frequency comb or even mode-locking operations, is through RF injection locking.The successful demonstration of RF injection locking in THz QC-VECSELs for the first time is the main focus of this thesis. Lasing spectral broadening has been observed under strong RF modulation, with a maximum bandwidth of around 100-300 GHz. An intermodal beat-note is produced as a result of beating between each of the two lasing modes. It is locked to the RF injection signal as the injection frequency is tuned around the cavity round-trip frequency. This suggests that the lasing modes are equally spaced, which is a prerequisite of frequency comb/mode-locking. Several impacting factors, including metasurface design, external cavity length, and optical feedback, are experimentally investigated in the RF-injection locked QC-VECSELs, which may help control and tune the laser states. THz QC-VECSEL is consequently considered to be a superior platform that enables a more thorough investigation of the fundamental physics of mode-locking/frequency comb operation in QCL systems. Our research on mode-locked THz QC-VECSELs opens the way for future development of semiconductor lasers operating in the 2-5 THz region that produce picosecond-scale pulses.

Download or read book Handbook of Terahertz Technologies written by Ho-Jin Song and published by CRC Press. This book was released on 2015-04-15 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: Terahertz waves, which lie in the frequency range of 0.1-10 THz, have long been investigated in a few limited fields, such as astronomy, because of a lack of devices for their generation and detection. Several technical breakthroughs made over the last couple of decades now allow us to radiate and detect terahertz waves more easily, which has trigg

Download or read book Terahertz Quantum Cascade Laser Application in Local Oscillator Development written by Rui Dong and published by . This book was released on 2016 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Development of Terahertz QCLs written by Sushil Kumar (Ph. D.) and published by . This book was released on 2007 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: The terahertz or the far-infrared frequency range of the electromagnetic spectrum (...) has historically been technologically underdeveloped despite having many potential applications, primarily due to lack of suitable sources of coherent radiation. Following on the remarkable development of mid-infrared (...) quantum-cascade lasers (QCLs) in the past decade, this thesis describes the development of electrically-pumped terahertz quantum-cascade lasers in GaAs/AlsGal_. As heterostructures that span a spectral range of 1.59 - 5.0 THz (...). A quantum-cascade laser (QCL) emits photons due to electronic intersubband transitions in the quantum-wells of a semiconductor heterostructure. The operation of terahertz QCLs at frequencies below the Reststrahlen band in the semiconductor (...), is significantly more challenging as compared to that of the mid-infrared QCLs. Firstly, due to small energy separation between the laser levels various intersubband scattering mechanisms are activated, which make it difficult to selectively depopulate the lower laser level. Additionally, as electrons gain enough kinetic energy in the upper laser level thermally activated longitudinal-optical (LO) phonon scattering reduces the level lifetime and makes it difficult to sustain population inversion at higher temperatures. Secondly, waveguide design for terahertz mode confinement is also more challenging due to higher free-carrier losses in the semiconducting doped regions at the terahertz frequencies. For successful designs reported in this work, the lower radiative state depopulation is achieved by a combination of resonant-tunneling and fast LO phonon scattering, which allow robust operation even at relatively high temperatures. An equally important enabling mechanism for these lasers is the development of metal-metal waveguides, which provide low waveguides losses, and strong mode confinement due to subwavelength mode localization in the vertical dimension. With these techniques some record performances for terahertz QCLs are demonstrated including the highest pulsed operating temperature of 169 K, the highest continuous-wave (cw) operating temperature of 117 K, and the highest optical power output (248 mW in pulsed and 138 mW in cw at 5 K) for any terahertz QCL. Towards the bigger goal of realizing a 1-THz solid-state laser to ultimately bridge the gap between electronic and optical sources of electromagnetic radiation, QCLs with a unique one-well injection scheme, which minimizes intersubband absorption losses that occur at longer wavelengths, are developed. Based on this scheme a QCL operating at 1.59 THz (A - 189 ym) is realized, which is amongst the lowest frequency solid-state lasers that operate without the assistance of a magnetic field. This thesis also reports on the development of distributed-feedback lasers in metal-metal waveguides to obtain single-mode operation, with greater output power and better beam quality. The subwavelength vertical dimension in these waveguides leads to a strongly coupled DFB action and a large reflection from the end-facets, and thus conventional coupled-mode theory is not directly applicable to the DFB design. A design technique with precise control of phase of reflection at the end-facets is developed with the aid of finite-element analysis, and with some additional unique design and fabrication methods, robust DFB operation has been obtained. Single-mode surface-emitting terahertz QCLs operating up to - 150 K are demonstrated, with different grating devices spanning a range of approximately 0.35 THz around v - 3 THz using the same gain medium. A single-lobed far-field radiation pattern, higher output power due to surface-emission, and a relatively small degradation in temperature performance compared to the Fabry-Perot ridge lasers makes these DFB lasers well suited for practical applications that are being targeted by the terahertz quantum-cascade lasers.