Download or read book Technology and the Treatment of Children with Autism Spectrum Disorder written by Teresa A. Cardon and published by Springer. This book was released on 2015-08-11 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume analyzes recent technological breakthroughs in aiding children with autism spectrum disorder (ASD). Chapters offer practical guidance in such areas as assessment, treatment planning, and collaborative intervention. The book also presents findings on hardware and software innovations and emphasizes their effectiveness in clinical practices that are targeted to specific cognitive, social, academic and motor skill areas. In addition, it describes promising new deficit-reducing and skill-enhancing technologies on the horizon. Featured topics include: Developing and supporting the writing skills of individuals with ASD through assistive technologies. The ways in which visual organizers may support executive function, abstract language comprehension and social learning. Do-as-I’m-doing situations involving video modeling and autism. The use of technology to facilitate personal, social and vocational skills in youth with ASD. Evidence-based instruction for students with ASD. The use of mobile technology to support community engagement and independence. Technology and Treatment of Children with Autism Spectrum Disorder is an essential resource for clinicians and related professionals as well as researchers and graduate students across such disciplines as child and school psychology, rehabilitation medicine, educational technology, occupational therapy, speech pathology and social work.

Download or read book Industrial Water Treatment Process Technology written by Parimal Pal and published by Butterworth-Heinemann. This book was released on 2017-03-31 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Water Treatment Process Technology begins with a brief overview of the challenges in water resource management, covering issues of plenty and scarcity-spatial variation, as well as water quality standards. In this book, the author includes a clear and rigorous exposition of the various water resource management approaches such as: separation and purification (end of discharge pipe), zero discharge approach (green process development), flow management approach, and preservation and control approach. This coverage is followed by deeper discussion of individual technologies and their applications. Covers water treatment approaches including: separation and purification—end of discharge pipe; zero discharge approach; flow management approach; and preservation and control approach Discusses water treatment process selection, trouble shooting, design, operation, and physico-chemical and treatment Discusses industry-specific water treatment processes

Download or read book Particle Therapy Technology for Safe Treatment written by Jay Flanz and published by CRC Press. This book was released on 2022-01-18 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: The path from clinical requirements to technical implementation is filtered by the translation of the modality to the technology. An important part of that filter is that the modality be safe. For that to be the case, it is imperative to understand what clinical parameters affect the safety of a treatment and then determine how the technology can affect those parameters. This book provides a practical introduction to particle therapy. It provides a thorough introduction to the technological tools and their applications and then details the components that are needed to implement them. It explains the foundations of beam production and beam delivery that serve to meet the necessary clinical requirements. It emphasizes the relationship between requirements and implementation, including how safety and quality are considered and implemented in the solution. The reader will learn to better understand what parameters are important to achieve these goals. Particle Therapy Technology for Safe Treatment will be a useful resource for professionals in the field of particle therapy in addition to biomedical engineers and practitioners in the field of beam physics. It can also be used as a textbook for graduate medical physics and beam physics courses. Key Features Presents a practical and accessible journey from application requirements to technical solutions Provides a pedagogic treatment of the underlying technology Describes how safety is to be considered in the application of this technology and how safety and quality can be factored into the overall system Author Bio After receiving his PhD in nuclear physics, Dr. Jacob Flanz was the Accelerator Physics Group leader and Principal Research Scientist at the Massachusetts Institute of Technology (MIT), USA, where he designed the recirculator and the GeV stretcher/storage ring. He joined Massachusetts General Hospital (MGH) and Harvard and became project and technical director of proton therapy, with responsibility for specifications, integration, and commissioning ensuring safe clinical performance. He invented the universal nozzle and led the design and implementation of beam scanning at MGH in 2008, including quality assurance. Dr. Flanz has been involved in several FDA applications for particle therapy. He developed and taught the US Particle Accelerator School course "Medical Applications of Accelerators and Beams." He was cochair of education and is currently the president of the Particle Therapy Co-Operative Group. Exercise solutions to accompany this book can be accessed via the 'Instructor Resources' tab on the book webpage.

Download or read book Pulp Technology and Treatment for Paper written by James d'A. Clark and published by Backbeat Books. This book was released on 1985 with total page 888 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Surface Treatment in Bonding Technology written by Anna Rudawska and published by Academic Press. This book was released on 2019-04-15 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface Treatment in Bonding Technology provides valuable advice on surface treatment methods, modern measuring devices, and the appropriate experimentation techniques that are essential to create strong joints with a reliable service life. The book's focus is on the detailed and up-to-date analysis of surface treatment methods for metallic and polymer substrates. An analysis of factors affecting the surface preparation stage, together with advice on selection, is also provided. Essential theory is combined with experimentation techniques and industry practice to provide a guide that is both practical and academically rigorous. Including a general introduction to bonding, as well as coverage of mechanical, chemical and electrochemical methods, this book is the ideal primer for anyone working with or researching adhesive bonding. Provides detailed descriptions of surface treatments and their mechanisms that will help readers build a deep understanding of these fundamental techniques Includes a thorough survey of recent advances in research in surface treatments of metals and polymers Provides technical advice on experimental testing methods throughout the book

Download or read book Cost Effective Technologies for Solid Waste and Wastewater Treatment written by Srujana Kathi and published by Elsevier. This book was released on 2021-11-03 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cost-Effective Technologies for Solid Waste and Wastewater Treatment synthesizes methods, case studies, and analyses of various state-of-the-art techniques for removing contaminants from wastewater, solid waste, or sewage and converting or reusing the waste with minimum impact on the environment. Focusing on innovative treatment strategies, as well as recent modifications to conventional processes, the book covers methods for a complex variety of emerging pollutants including organic matter, chemicals, and micropollutants resulting from developmental and industrial activities. Serving as a practical guide to state-of-the-art methods, Cost-Effective Technologies for Solid Waste and Wastewater Treatment also delivers foundational information on the practical design of treatment and reuse systems and explains the treatments in terms of scale, efficiency, and effectiveness. It focuses on cost-effective technologies that are particularly applicable to environmental clean-up, such as bioaugmentation and biostimulation of plastics, activated carbon, phytoremediation, crude oil pollution stress, adsorbents, contaminants of emerging concern, anaerobic digestion, in situ chemical oxidation (ISCO), biosorption, bioremediation, radioactive contaminants, constructed wetlands, nanoremediation, and rainwater. As such, it is a valuable and practical resource for researchers, students, and managers in the fields of environmental science and engineering, as well as wastewater management, chemical engineering, and biotechnology. • Presents low-cost treatment technologies for both solid waste and wastewater • Analyzes the efficiency and effectiveness of state-of-the-art technologies • Includes methods and case studies for practical application

Download or read book Integrated and Hybrid Process Technology for Water and Wastewater Treatment written by Abdul Wahab Mohammad and published by Elsevier. This book was released on 2021-08-25 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tackling the issue of water and wastewater treatment nowadays requires novel approaches to ensure that sustainable development can be achieved. Water and wastewater treatment should not be seen only as an end-of-pipe solution but instead the approach should be more holistic and lead to a more sustainable process. This requires the integration of various methods/processes to obtain the most optimized design. Integrated and Hybrid Process Technology for Water and Wastewater Treatment discusses the state-of-the-art development in integrated and hybrid treatment processes and their applications to the treatment of a vast variety of water and wastewater sources. The approaches taken in this book are categorized as (i) resources recovery and consumption, (ii) optimal performance, (iii) physical and environmental footprints, (iv) zero liquid discharge concept and are (v) regulation-driven. Through these categories, readers will see how such an approach could benefit the water and wastewater industry. Each chapter discusses challenges and prospects of an integrated treatment process in achieving sustainable development. This book serves as a platform to provide ideas and to bridge the gap between laboratory-scale research and practical industry application. Includes comprehensive coverage on integrated and hybrid technology for water and wastewater treatment Takes a new approach in looking at how water and wastewater treatment contributes to sustainable development Provides future direction of research in sustainable water and wastewater treatment

Download or read book The Science and Technology of Industrial Water Treatment written by Zahid Amjad and published by CRC Press. This book was released on 2010-04-05 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mineral scale deposits, corrosion, suspended matter, and microbiological growth are factors that must be controlled in industrial water systems. Research on understanding the mechanisms of these problems has attracted considerable attention in the past three decades as has progress concerning water treatment additives to ameliorate these concerns.

Download or read book Electronic Waste Management and Treatment Technology written by Majeti Narasimha Vara Prasad and published by Butterworth-Heinemann. This book was released on 2019-03-14 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronic Waste Management and Treatment Technology applies the latest research for designing waste treatment and disposal strategies. Written for researchers who are exploring this emerging topic, the book begins with a short, but rigorous, discussion of electric waste management that outlines common hazardous materials. such as mercury, lead, silver and flame-retardants. The book also discusses the fate of metals contained in waste electrical and electronic equipment in municipal waste treatment. Materials and methods for the remediation, recycling and treatment of plastic waste collected from waste electrical and electronic equipment (WEEE) are also covered. Finally, the book covers the depollution benchmarks for capacitors, batteries and printed circuit boards from waste electrical and electronic equipment (WEEE) and the recovery of waste printed circuit boards through pyrometallurgy. Describes depollution benchmarks for capacitors, batteries and printed wiring boards from waste electronics Covers metals contained in waste electrical and electronic equipment in municipal waste Provides tactics for the recycling of mixed plastic waste from electrical and electronic equipment

Download or read book Groundwater Treatment Technology written by Evan K. Nyer and published by John Wiley & Sons. This book was released on 1992-05-15 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Groundwater treatment is unique. Removing the sources of contamination, as we did when we cleaned a river or lake, is only the first step. A groundwater remediation must include cleaning of the body of water itself, the aquifer. The revised and updated edition of Groundwater Treatment Technology provides a complete review of the technologies developed over the past 10 years for groundwater treatment. It also explains the design techniques that are required to apply those technologies successfully in a groundwater cleanup. Featured areas of coverage include: Specific design methods for the various technologies that are merely described in other publications Physical/chemical and treatability properties of 30 organic compounds that are most often encountered in groundwater situations Detailed strategies for remediation New biological treatment methods Specific data on treatment methods as applied in the field Practical suggestions on applications of technologies for groundwater treatment Drawing on his experience as a designer of over 100 groundwater treatment systems, Evan K. Nyer starts by showing how to develop the data necessary to define what type of treatment is necessary. He then explains how groundwater treatment is unique. Nyer follows with expert accounts of specific treatment technologies. Physical/chemical organic methods such as air stripping, carbon adsorption, and pure compound removal are explored in detail. In addition, new techniques including UV Oxidation and other emerging technologies are explained and directly related to groundwater design situations. An entire chapter is devoted to biological methods, one of the most promising areas for organic groundwater treatment. There is also comprehensive coverage of inorganic methods, that addresses everything from precipitation to solids/liquid separation and advanced ion removal methods. This definitive sourcebook also contains helpful cost factor analyses, plus representative case histories showing how the techniques of groundwater treatment have been applied in the field. Wide-ranging, authoritative, and completely updated, the Second Edition of Groundwater Treatment Technology is essential reading for wastewater engineers, industrial managers, hydrologists, soil experts, government officials, and environmental lawyers who want to keep abreast of the latest developments in this important field.

Download or read book Wastewater Treatment written by D. G. Rao and published by CRC Press. This book was released on 2012-07-05 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emphasizing new technologies that produce clean water and energy from the wastewater treatment process, this book presents recent advancements in wastewater treatment by various technologies such as chemical methods, biochemical methods, membrane separation techniques, and nanotechnology. It addresses sustainable water reclamation, biomembrane treatment processes, advanced oxidation processes, and applications of nanotechnology for wastewater treatment. It also includes integrated cost-based design methodologies. Equations, figures, photographs and tables are included within the chapters to aid reader comprehension. Case studies and examples are included as well.

Download or read book Virtual and Augmented Reality in Mental Health Treatment written by Guazzaroni, Giuliana and published by IGI Global. This book was released on 2018-11-02 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Medical and technological organizations have recently developed therapy and assistance solutions that venture beyond what is considered conventional for individuals with various mental health conditions and behavioral disorders such as autism, Down syndrome, Alzheimer’s disease, anxiety disorders, phobias, and learning difficulties. Through the use of virtual and augmented reality, researchers are working to provide alternative therapy methods to treat these conditions, while studying the long-term effects the treatment has on patients. Virtual and Augmented Reality in Mental Health Treatment provides innovative insights into the use and durability of virtual reality as a treatment for various behavioral and emotional disorders and health problems. The content within this publication represents the work of e-learning, digital psychology, and quality of care. It is designed for psychologists, psychiatrists, professionals, medical staff, educators, and researchers, and covers topics centered on medical and therapeutic applications of artificial intelligence and simulated environment.

Download or read book The Changing Economics of Medical Technology written by Institute of Medicine and published by National Academies Press. This book was released on 1991-02-01 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: Americans praise medical technology for saving lives and improving health. Yet, new technology is often cited as a key factor in skyrocketing medical costs. This volume, second in the Medical Innovation at the Crossroads series, examines how economic incentives for innovation are changing and what that means for the future of health care. Up-to-date with a wide variety of examples and case studies, this book explores how payment, patent, and regulatory policiesâ€"as well as the involvement of numerous government agenciesâ€"affect the introduction and use of new pharmaceuticals, medical devices, and surgical procedures. The volume also includes detailed comparisons of policies and patterns of technological innovation in Western Europe and Japan. This fact-filled and practical book will be of interest to economists, policymakers, health administrators, health care practitioners, and the concerned public.

Download or read book Using Technology in Mental Health Practice written by Jeffrey J. Magnavita and published by American Psychological Association (APA). This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume describes technological advances that foster better access to mental and behavioral health care, improved treatment, and professional development for providers.

Download or read book The Role of Telehealth in an Evolving Health Care Environment written by Institute of Medicine and published by National Academies Press. This book was released on 2012-12-20 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1996, the Institute of Medicine (IOM) released its report Telemedicine: A Guide to Assessing Telecommunications for Health Care. In that report, the IOM Committee on Evaluating Clinical Applications of Telemedicine found telemedicine is similar in most respects to other technologies for which better evidence of effectiveness is also being demanded. Telemedicine, however, has some special characteristics-shared with information technologies generally-that warrant particular notice from evaluators and decision makers. Since that time, attention to telehealth has continued to grow in both the public and private sectors. Peer-reviewed journals and professional societies are devoted to telehealth, the federal government provides grant funding to promote the use of telehealth, and the private technology industry continues to develop new applications for telehealth. However, barriers remain to the use of telehealth modalities, including issues related to reimbursement, licensure, workforce, and costs. Also, some areas of telehealth have developed a stronger evidence base than others. The Health Resources and Service Administration (HRSA) sponsored the IOM in holding a workshop in Washington, DC, on August 8-9 2012, to examine how the use of telehealth technology can fit into the U.S. health care system. HRSA asked the IOM to focus on the potential for telehealth to serve geographically isolated individuals and extend the reach of scarce resources while also emphasizing the quality and value in the delivery of health care services. This workshop summary discusses the evolution of telehealth since 1996, including the increasing role of the private sector, policies that have promoted or delayed the use of telehealth, and consumer acceptance of telehealth. The Role of Telehealth in an Evolving Health Care Environment: Workshop Summary discusses the current evidence base for telehealth, including available data and gaps in data; discuss how technological developments, including mobile telehealth, electronic intensive care units, remote monitoring, social networking, and wearable devices, in conjunction with the push for electronic health records, is changing the delivery of health care in rural and urban environments. This report also summarizes actions that the U.S. Department of Health and Human Services (HHS) can undertake to further the use of telehealth to improve health care outcomes while controlling costs in the current health care environment.

Download or read book Groundwater Remediation and Treatment Technologies written by Nicholas P. Cheremisinoff and published by Elsevier. This book was released on 1998-12-31 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume has been organized for practicing engineers who deal with the problems of groundwater and leachate remediation. It is intended to provide a practical overview of both techniques for evaluating groundwater quality and in selecting remediation technologies that are cost effective. Emphasis is given to advanced remediation methods.

Download or read book Environmental Treatment Technologies for Municipal Industrial and Medical Wastes written by Subijoy Dutta and published by CRC Press. This book was released on 2021-10-01 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental Treatment Technologies for Municipal, Industrial and Medical Wastes will provide the reader with a simple and clear path to analyze the full range of options to manage/treat any solid, hazardous, or medical waste problems/issues at hand. This book aims to disseminate information on available remediation treatment technologies to developing and developed countries. It also includes adequate information on all available treatment technologies for different types and categories of waste (hazardous, non-hazardous municipal solid waste, and medical waste). The technologies are grouped into the following categories: Containment technology; Soil washing; Thermal treatment; Vapor extraction; Bioremediation including Phytoremediation; Plasma/Incineration; Other Physical/Chemical treatments. It enlightens the effect of emissions during remediation activities on climate change and suggests measures to identify and control such emissions. It also covers the application of remote sensing technologies with examples and the impending issues of proper disinfection and disposal of COVID-19 related waste pertaining to the current pandemic. It is intended for almost anyone — ranging from college students and early career professionals interested in environmental pollution control, to graduate students, researchers and experienced professionals. This book will: cover several recent developments on various treatment technologies, including in situ applications and their emission/migration control methods including remote sensing technologies; deal with municipal solid waste, their treatment/disposal methods, recycling, and reuse in addition to the hazardous and medical waste management program; assist civil/environmental engineering students and local community organizations in evaluating the impact of an industry and its associated waste produced on-site; and cover how best to treat/manage the waste to arrive at a safe operation without impacting human health and the local environment.