Download or read book Teacher s Handbook of Manual Training written by J. S. Miller and published by . This book was released on 1903 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Teacher s Handbook of Manual Training Metal Work written by J. S. Miller and published by Forgotten Books. This book was released on 2015-06-25 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Teacher's Handbook of Manual Training Metal Work Before commencing the work planned out in the following pages, the boys will have had considerable practice in the use of the rule, compasses and set squares, to which should be added that of the drawing board and T-square. They should also understand thoroughly the meaning of plan and elevation, and be able to draw the plan and elevation of simple models. A working acquaintance with scale drawing is also necessary as a preliminary to the study of metal work. All drawing should be executed to as large a scale as possible. As in most Manual Training Centres there is only one forge and one teacher, it is difficult to provide work at the forge for each boy. This difficulty is partially obviated by working certain exercises conjointly, namely, 11 and 12, 18 and 19, and 25 and 26. Similarly exercises 13 and 14 are worked conjointly, because, as a rule, only one set of stocks and dies is supplied. Heavy chipping and surfacing are put late in the course, as this work is exhausting to most boys until their muscles have become hardened by practice in the use of the file. The method of holding the various tools, and detailed instructions for marking out and drawing the exercises contained in this book, are fully illustrated by diagrams in the key to be published shortly. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Teacher s Handbook of Manual Training Metal Work written by J. S. Miller and published by Legare Street Press. This book was released on 2023-07-18 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive guide to metal work offers detailed explanations of the materials, tools, and techniques used in the craft. With clear illustrations, helpful tips, and practical advice, this book is an essential resource for teachers of manual training courses and anyone interested in metalworking. This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work is in the "public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
Download or read book Teacher s Handbook of Manual Training written by J. S. Miller and published by Nabu Press. This book was released on 2014-01 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a reproduction of a book published before 1923. This book may have occasional imperfections such as missing or blurred pages, poor pictures, errant marks, etc. that were either part of the original artifact, or were introduced by the scanning process. We believe this work is culturally important, and despite the imperfections, have elected to bring it back into print as part of our continuing commitment to the preservation of printed works worldwide. We appreciate your understanding of the imperfections in the preservation process, and hope you enjoy this valuable book.
Download or read book Teacher s Handbook of Manual Training Metal Work Containing Demonstration Lessons of All Tools and Principles Ordinarily Used in a Manual Training written by J. S. Miller and published by Neilson Press. This book was released on 2011-09-01 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: This antique volume contains a detailed guide on metalworking, including demonstration lessons of all tools and principles ordinarily used in a manual training course. Directions are given for the methods of holding the various tools, and detailed illustrated instructions for making out and drawing the exercises, are also provided. Much of the information contained within these pages is timeless, and will be of much value to modern readers as an introduction to metalworking. The chapters of this book include: The Vice, The Fire and Filing, The Scribe and Scribing, Straight-Edge, The Engineer's Square, The Shears and Shearing, Wing Compasses and Spring Dividers, The Centre Punch, The Hammer, The Chisel and Chipping... and more. This volume was first published in 1903, and is proudly republished now complete with a new introduction on metalworking.
Download or read book Teacher s Handbook of Manual Training Metal Work With Illustrations written by J. S. MILLER (Instructor of Metal Work to the Reading School Board.) and published by . This book was released on 1903 with total page 147 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Work written by Hugh M. Adam and published by Forgotten Books. This book was released on 2018-01-31 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Metal-Work: A Handbook for Teachers and Students The subject-matter of this book is presented to the student accompanied by a word of warning: It is not to be considered as an exhaustive textbook on metal - work, but as an attempt to set down as clearly as possible an account of the equip ment necessary, and of the operations and general principles involved in the use of metal - work as a method of education. No model courses of work are presented to be adopted whole sale. The best courses are those determined by the varying conditions under which the teacher works, and which are evolved from the experiences and circumstances arising in the handicraft-room. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Teacher s Handbook of Manual Training Metal Work written by J. S. Miller and published by . This book was released on 1903 with total page 147 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Work written by Hugh M. Adam and published by Forgotten Books. This book was released on 2015-06-24 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Metal-Work: A Handbook for Teachers and Students The subject-matter of this book is presented to the student accompanied by a word of warning: It is not to be considered as an exhaustive textbook on metal-work, but as an attempt to set down as clearly as possible an account of the equipment necessary, and of the operations and general principles involved in the use of metal-work as a method of education. No model courses of work are presented to be adopted wholesale. The best courses are those determined by the varying conditions under which the teacher works, and which are evolved from the experiences and circumstances arising in the handicraft-room. The step from wood-work to metal-work in the handicraft-room is a natural one. This subject introduces the pupil to new conditions, new forces - at least, if not new, so disguised as to be unrecognizable - and consequently, to the necessity of adapting himself to his new environment, in order to meet by new methods the obstacles presented in the new material, tools, etc. His outlook is thus broadened and his nature receives a new discipline, in which process the attitude of mind created in the wood-work room will serve him well. This change of atmosphere revivifies his enthusiasm - a powerful ally in the hands of the expert teacher. Metal-work has suffered considerably at the hands of the ill-informed. No doubt the term has led to erratic conclusions concerning its scope and objects, and to its being considered an unsuitable subject for the handicraft-room. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Handcraft in Wood and Metal written by John Hooper and published by Forgotten Books. This book was released on 2015-06-15 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Handcraft in Wood and Metal: A Handbook of Training in Their Practical Working for Teachers, Students,& Craftsmen In preparing this work the authors have endeavoured to show the possibilities of craftwork as an educational subject, and to briefly indicate its cultural aspects. One of the prejudices against handcraft or so-called "manual work" has been that it had more value from a physical than an educational or cultural standpoint, with the result that "handcraft" in schools has too frequently been classed as "carpentry", The authors think that lessons based upon the historical phases of craftwork, particularly in the development of types of construction in furniture and metalwork, and the growth of tools from prehistoric times, together with the study of simple applied art as displayed in historic work, will do much to increase the value of handcraft in schools. Whilst the work has been prepared primarily for the teacher, the aim has been to render treatment of the subject such as to make the work of value and interest to the craftsman, and a useful guide for the pupil or student. As an aid to class teachers in helping on a technical side in central schools, they hope it will find a place among the books pertaining to craft and general education. It is hoped further that the work will be regarded as a collection of suggestions and data, rather than an attempt to produce a series of models. The authors believe that at least one aspect of handcraft has been almost entirely neglected in the past, i.e. the artistic side; and, whilst not claiming any special merit for the design of the models dealt with, they have endeavoured to embody some artistic merit in the designs, and have tabooed the meaningless joints and collection of joints which have only a limited mechanical value. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Manual Training Classic Reprint written by Ontario Department Of Education and published by Forgotten Books. This book was released on 2018-02-04 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Manual Training It should be remembered that this Manual is issued solely as a guide to teachers. It is not a text-book, nor does its use render it unnecessary to consult the various reference books mentioned. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Metal work A Handbook for Teachers and Students written by Hugh Murray Adam and published by . This book was released on 1926 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book METAL WORK A HANDBK FOR TEACHE written by Hugh M. Adam and published by Wentworth Press. This book was released on 2016-08-27 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work was reproduced from the original artifact, and remains as true to the original work as possible. Therefore, you will see the original copyright references, library stamps (as most of these works have been housed in our most important libraries around the world), and other notations in the work. This work is in the public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. As a reproduction of a historical artifact, this work may contain missing or blurred pages, poor pictures, errant marks, etc. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
Download or read book Elementary Metal Work written by Charles Godfrey Leland and published by Forgotten Books. This book was released on 2018-02-19 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Elementary Metal Work: A Practical Manual for Amateurs and for Use in Schools This work contains an explanation of the processes of cold metal work, chiefly as applied to decorative or industrial art, and especially with a View to their being taught to children in ele mentary and preparatory schools. The author believes that it may be regarded as thoroughly adapted to this purpose, he having been founder and director for four years of the industrial art classes in the public schools of Philadelphia, in which some of these branches of metal work were taught with great success, so that many of the pupils on leaving school immediately Obtained well-paid employment. As many as six girls at once thus went from the metal class to a factory, the proprietor of which declared that all the preliminary education, which gave him more trouble than anything else, had been perfectly im parted. On another occasion, a principal in an ornamental metal factory, after careful examination of the design and work of the pupils, offered to take forty together, and guarantee living wages from the beginning, and a rapid increase of payment, if their parents would consent. All that these children knew, and much more, is set forth clearly and briefly in this work, so that no person, young or old, who wishes to learn metal work either as an art or a trade, can with a proper degree ofinterest and industry fail to do so. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Industrial Education written by Samuel G. Love and published by Forgotten Books. This book was released on 2018-03-21 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Industrial Education: A Guide to Manual Training The lessons in this volume were originally pre pared as a guide for the instructors and pupils in the Industrial department of the schools with which the authors are connected. A complete system of Manual Training having been organized and put in operation, it became necessary that it should be formulated for the convenience of the classes, and for the guidance of the instructors in charge of them. It was not supposed that there would be a demand for the publication of this course in Manual Train ing. But the subject of Industrial Education has been rapidly growing in the minds of teachers and others interested in the development and growth of educational methods. Inquiries came with increased frequency as to what was being done in the J ames town schools, and whether it was practicable to make Manual Training a feature of education in the public schools. It was thought best to make no reply until actual tests, in all the grades from the Primary to the High Schools, had been made. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book The Manual Training School Comprising a Full Statement of Its Aims Methods and Results written by C. M. Woodward and published by . This book was released on 2015-07-11 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from The Manual Training School, Comprising a Full Statement of Its Aims, Methods, and Results: With Figured Drawings of Shop Exercises in Woods and Metals This book really consists of four Parts; namely: - I. The Historical Introduction and Chap. XIV. II. The exposition of the methods and scope of the school, with full details as regards the manual elements, in Chaps. II., III., IV., and XV. III. The results of manual training, as shown by the records and testimony of graduates and others, in Chaps. V. and VI. IV. Discussions of the educational, social, and economic bearings of manual training from various standpoints and at various times, in Chaps. VII. to XIII. It is possible that this classification may be of value to those who come for suggestions in specific directions. To others the arrangement may appear illogical, and the repetitions unnecessary. In defence of the arrangement I must say that I have had in mind two things: first and foremost, the probable state of mind of the reader who comes to this book to learn of a matter of which he has heard much, but knows little. He wants facts, arguments, and speculations, according to the stage of his progress in finding out what manual training really is, and what it aims at. And secondly, the desirability of showing clearly the growth and progress of ideas in the development of the school. As to the occasional repetitions of statements and arguments, I will say that no one is likely to read the book through consecutively. Those who do me the honor to read it at all will read by topics and separate chapters, and being thus read I doubt if the repetitions will be found objectionable. Of necessity, much common material appears in every address. The earlier addresses were quite general in their treatment, and I have preferred to let them stand fairly complete. I trust no apology will be necessary for inserting addresses which, in one form or another, have already appeared in print. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Metalwork written by and published by . This book was released on 1984 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
