Download or read book Synthesis of ZnO CuO and Their Composite Nanostructures for Optoelectronics Sensing and Catalytic Applications written by Saima Zaman and published by . This book was released on 2012 with total page 59 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research on nanomaterials has become increasingly popular because of their unique physical, chemical, optical and catalytic properties compared to their bulk counterparts. Therefore, many efforts have been made to synthesize multidimensional nanostructures for new and efficient nanodevices. Among those materials, zinc oxide (ZnO), has gained substantial attention owing to many outstanding properties. ZnO besides its wide bandgap of 3.34 eV exhibits a relatively large exciton binding energy (60 meV) at room temperature which is attractive for optoelectronic applications. Likewise, cupric oxide (CuO), having a narrow band gap of 1.2 eV and a variety of chemo-physical properties that are attractive in many fields. Moreover, composite nanostructures of these two oxides (CuO/ZnO) may pave the way for various new applications.??This thesis can be divided into three parts concerning the synthesis, characterization and applications of ZnO, CuO and their composite nanostructures.??In the first part the synthesis, characterization and the fabrication of ZnO nanorods based hybrid light emitting diodes (LEDs) are discussed. The low temperature chemical growth method was used to synthesize ZnO nanorods on different substrates, specifically on flexible non-crystalline substrates. Hybrid LEDs based on ZnO nanorods combined with p-type polymers were fabricated at low temperature to examine the advantage of both materials. A single and blended light emissive polymers layer was studied for controlling the quality of the emitted white light.??The second part deals with the synthesis of CuO nanostructures (NSs) which were then used to fabricate pH sensors and exploit these NSs as a catalyst for degradation of organic dyes. The fabricated pH sensor exhibited a linear response and good potential stability. Furthermore, the catalytic properties of petals and flowers like CuO NSs in the degradation of organic dyes were studied. The results showed that the catalytic reactivity of the CuO is strongly depending on its shape.??In the third part, an attempt to combine the advantages of both ZnO and CuO NSs was performed by developing a two-step chemical growth method to synthesize the composite NSs. The synthesized CuO/ZnO composite NSs revealed an extended light absorption and enhanced defect related visible emission.
Download or read book Nanostructured Zinc Oxide written by Kamlendra Awasthi and published by Elsevier. This book was released on 2021-08-10 with total page 781 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanostructured Zinc Oxide covers the various routes for the synthesis of different types of nanostructured zinc oxide including; 1D (nanorods, nanowires etc.), 2D and 3D (nanosheets, nanoparticles, nanospheres etc.). This comprehensive overview provides readers with a clear understanding of the various parameters controlling morphologies. The book also reviews key properties of ZnO including optical, electronic, thermal, piezoelectric and surface properties and techniques in order to tailor key properties. There is a large emphasis in the book on ZnO nanostructures and their role in optoelectronics. ZnO is very interesting and widely investigated material for a number of applications. This book presents up-to-date information about the ZnO nanostructures-based applications such as gas sensing, pH sensing, photocatalysis, antibacterial activity, drug delivery, and electrodes for optoelectronics. Reviews methods to synthesize, tailor, and characterize 1D, 2D, and 3D zinc oxide nanostructured materials Discusses key properties of zinc oxide nanostructured materials including optical, electronic, thermal, piezoelectric, and surface properties Addresses most relevant zinc oxide applications in optoelectronics such as light-emitting diodes, solar cells, and sensors
Download or read book Metal Oxide Nanostructures written by Daniela Nunes and published by Elsevier. This book was released on 2018-11-01 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Nanostructures: Synthesis, Properties and Applications covers the theoretical and experimental aspects related to design, synthesis, fabrication, processing, structural, morphological, optical and electronic properties on the topic. In addition, it reviews surface functionalization and hybrid materials, focusing on the advantages of these oxide nanostructures. The book concludes with the current and future prospective applications of these materials. Users will find a complete overview of all the important topics related to oxide nanostructures, from the physics of the materials, to its application. Delves into hybrid structured metal oxides and their promising use in the next generation of electronic devices Includes fundamental chapters on synthesis design and the properties of metal oxide nanostructures Provides an in-depth overview of novel applications, including chromogenics, electronics and energy
Download or read book Zinc Oxide Nanostructures Synthesis and Characterization written by Sotirios Baskoutas and published by MDPI. This book was released on 2018-12-04 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Zinc Oxide Nanostructures: Synthesis and Characterization" that was published in Materials
Download or read book Photocatalytic Activity of Hydrothermally Synthesized ZnO CuO Nanocomposite written by Mohammad Fuad Nur Taufique and published by . This book was released on 2015 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: Zinc oxide and copper oxide semiconductor nanostructures have tremendous potential in optoelectronic applications and energy technology. ZnO-CuO nanocomposite have been synthesized by energy efficient hydrothermal method from single stock solution. Structural properties of the nanocomposite samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and Raman spectroscopy. Optical properties were studied by photoluminescence (PL) spectroscopy. Rietveld analysis of the XRD data and SEM data confirmed the nanocomposite of ZnO-CuO with different ratios of ZnO and CuO. Raman spectra of the nanocomposites consist of optical vibrational mode of ZnO and CuO. The unique photoluminescence spectra have characteristic peaks in the visible range which confirmed that the nanocomposite can absorb better in the solar visible region. Further, synthesized samples were used for degradation of methylene blue dye under illumination of UV-Vis light to check the photocatalytic activity. Some nanocomposite samples have shown photocatalytic efficiency of 56% under the illumination of UV-Vis light. The efficiency of the catalyst, their growth mechanism, and the photocatalytic mechanism have been discussed in details. These ZnO-CuO nanocomposites can be used as effective photocatalytic material for waste water decontamination as well as hydrogen generation for energy applications.
Download or read book Metal Oxides for Optoelectronics and Optics Based Medical Applications written by Suresh Sagadevan and published by Elsevier. This book was released on 2022-07-01 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxides for Optoelectronics and Optics-based Medical Applications reviews recent advances in metal oxides and their mechanisms for optoelectronic, photoluminescent and medical applications. In addition, the book examines the integration of key chemistry concepts with nanoelectronics that can improve performance in a diverse range of applications. Sections place a strong emphasis on synthesis processes that can improve the metal oxides’ physical properties and the reflected surface chemical changes that can impact their performance in various devices like light-emitting diodes, luminescence materials, solar cells, etc. Finally, the book discusses the challenges associated with the handling and maintenance of metal oxides crystalline properties. This book will be suitable for academics and those working in R&D in industry looking to learn more about cheaper and more effective methods to produce metal oxides for use in the fields of electronics, photonics, biophotonics and engineering. Reviews the latest advances in the utilization of metal oxide materials in photonics, optoelectronics and optics-based medical applications Considers the most relevant synthesis strategies for the development of high-performing metal oxide-based devices Addresses a wide range of metal oxides including photonic crystals, fibers, metastructures, glasses, and more
Download or read book ZnO and Their Hybrid Nano Structures written by Gaurav Sharma and published by Materials Research Forum LLC. This book was released on 2023-06-05 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: ZnO and its hybrid nanostructures have unique optical, physical and chemical properties. The book covers recent trends in processing techniques and applications. Topics include solar cells, photo-voltaic devices, fuel cells, uv filters, lasers, light-emitting diodes, photo-detectors, spin-tronic devices, magnetic semiconductors, nano-generators, piezotronics, photo-catalytic applications against harmful organic pollutants like dyes, heavy metals, antibiotics, and sensors such as bio sensors, chemical sensors, gas sensors. Keywords: ZnO, Nano ZnO, Point Defects, Magnetic Semiconductors, Hybrid Nanostructures, Cell Applications, Nanoadsorbant for Heavy Metal Removals, Diagnostics, ZnO Nano-Carriers, ZnO Thin Films Fabrication.
Download or read book ZnO Nanostructures written by Dana Crawford and published by . This book was released on 2020-01-07 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Different ZnO nanostructures are attributed to different electronic properties which are favourable in the application of photocatalysis, sensing and energy harvesting. The non toxic behaviour of ZnO nanostructures lead to the use of this material in environmental sensing and environmental remediation. In ZnO Nanostructures: Advances in Research and Applications, a large-scale synthesis of undoped low-dimensional semiconductor metal oxide nanostructures is performed by simple wet-chemical method using reducing agents at low temperature. The detailed structural, compositional, and optical characterizations of the ZnO nanoparticles were evaluated by powder X-ray diffraction pattern, Fourier-transform infra-red spectroscopy, X-ray photoelectron spectroscopy, electron dispersion spectroscopy and UV-vis. Spectroscopy. Following this, the authors describe the structure electrochemical sensors, listing scientific papers focusing on the detection of different pathogens and analytes, as well as reporting and comparing the performance of the sensors prepared by various groups around the world. The concluding chapter deals with synthesis protocols of ZnO heterostructures along with their role in optoelectronic applications. Their thermodynamic stability and correlation among morphology, defects, and heterostructure with luminating and catalytic properties is also described"--
Download or read book Synthesis and Characterization of ZnO Graphene Nanostructures for Electronics and Photocatalysis written by Seyed Ebrahim Chalangar and published by Linköping University Electronic Press. This book was released on 2021-04-08 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent rapid development of electronics and electro-optical devices demands affordable and reliable materials with enhanced performance. Forming nanocomposites of already well-known materials is one possible route towards novel functional materials with desirable synergistic enhanced properties. Incompatible chemical properties, mismatched crystal structures and weak bonding interactions between the substances, however, often limit the number of possible nanocomposites. Moreover, using an inexpensive, facile, large-area and flexible fabrication technique is crucial to employ the new composites in industrially viable applications. This thesis focuses on the synthesis and characterization of different zinc oxide/graphene (ZnO/GR) nanocomposites, well suited for optoelectronics and photocatalysis applications. Two different approaches of i) substrate-free random synthesis, and ii) template-assisted selective area synthesis were studied in detail. In the first approach, ZnO nanoparticles/rods were grown on GR. The obtained nanocomposites were investigated for better GR dispersity, electrical conductivity and optical properties. Besides, by adding silver iodide to the nanocomposite, an enhanced plasmonic solar-driven photocatalyst was synthesized and analyzed. In the second approach, arrays of single, vertically aligned ZnO nanorods were synthesized using a colloidal lithography-patterned sol-gel ZnO seed layer. Our demonstrated nanofabrication technique with simple, substrate independent, and large wafer-scale area compatibility improved the alignment and surface density of ZnO nanorods over large selective growth areas. Eventually, we found a novel method to further enhance the vertical alignment of the ZnO nanorods by introducing a GR buffer layer between the Si substrate and the ZnO seed layer, together with the mentioned patterning technique. The synthesized nanocomposites were analyzed using a large variety of experimental techniques including electron microscopy, photoelectron spectroscopy, x-ray diffraction, photoluminescence and cathodoluminescence spectroscopy for in-depth studies of their morphology, chemical and optical properties. Our findings show that the designed ZnO/GR nanocomposites with vertically aligned ZnO nanorods of high crystalline quality, synthesized with the developed low-cost nanofabrication technique, can lead to novel devices offering higher performance at a significantly lower fabrication cost.
Download or read book 1D Semiconducting Hybrid Nanostructures written by Arvind Kumar and published by John Wiley & Sons. This book was released on 2023-03-06 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: In-depth discussion on the physics, chemistry, and engineering beneath the construction of 1D semiconducting hybrid materials 1D Semiconducting Hybrid Nanostructures: Synthesis and Applications in Gas Sensing and Optoelectronics provides breakthrough research developments and trends in a variety of 1D hybrid nanostructures for chemi-resistive gas sensors and optoelectronics applications, including recent investigations and developments regarding the innovative designing approaches, fabrications, and methods used to characterize these hybrid nanostructures. The text also includes the surface and interface properties of 1D hybrid semiconducting nanostructured materials, as well as their optimization for applications in gas sensing and optoelectronics. This book further addresses the different issues of sensitivity, selectivity, and operating temperature of gas sensors based on hybrid 1D nanostructures. Moreover, it covers the novel and additional functional optoelectronic properties that originate at the interface of 1D semiconducting nanostructures combined with other low dimensional materials. Some of the specific sample topics covered in this book include: Gas sensing and optoelectronic applications of one-dimensional semiconducting hybrid nanostructures, plus synthesis and gas sensing application of 1D semiconducting hybrid nanostructures Room temperature gas sensing properties of metal oxide nanowire/graphene hybrid structures and highly sensitive room temperature gas sensors based on organic-inorganic nanofibers Synthesis and applications of 1D hybrid tin oxide nanostructures and recent advances in semiconducting nanowires-based hybrid structures for solar application Types of semiconducting hybrid nanostructures for optoelectronic devices and hybrid 1D semiconducting ZnO/GaN nanostructures Thanks to its comprehensive coverage of the subject from highly qualified authors who have significant experience in the field, 1D Semiconducting Hybrid Nanostructures is a must-have reference for senior undergraduate and graduate students, professionals, researchers, in the field of semiconductor physics, materials science, surface science, and chemical engineering.
Download or read book Zinc Oxide Based Nano Materials and Devices written by , Prof. Dr. Ahmed Nahhas and published by BoD – Books on Demand. This book was released on 2019-10-09 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a review of recent advances in ZnO-based nanomaterials and devices. ZnO as a nanomaterial has gained substantial interest in the research area of wide bandgap semiconductors and is considered to be one of the major candidates for electronic and photonic applications. ZnO has distinguished and interesting electrical and optical properties and is considered to be a potential material in optoelectronic applications such as solar cells, surface acoustic wave devices, and UV emitters. ZnO's unique properties have attracted several researchers to study its electrical and optical properties. As a nanostructured material, ZnO exhibits many advantages for nanodevices. Moreover, it has the ability to absorb the UV radiation.
Download or read book ZnO Nanostructures written by Yue Zhang and published by Royal Society of Chemistry. This book was released on 2017-06-21 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: As wide band semiconductors with rich morphologies and interesting electric, optical, mechanical and piezoelectric properties, ZnO nanostructures have great potential in applications, such as strain sensors, UV detectors, blue LED, nano generators, and biosensors. ZnO Nanostructures: Fabrication and Applications covers the controllable synthesis and property optimization of ZnO nanostructures through to the preparation and performance of nanodevices for various applications. The book also includes recent progress in property modulation of ZnO nanomaterials and new types of devices as well as the latest research on self-powered devices and performance modulation of ZnO nanodevices by multi-field coupled effects. Authored by a leading researcher working within the field, this volume is applicable for those working in nanostructure fabrication and device application in industry and academia and is appropriate from advanced undergraduate level upwards.
Download or read book ZnO and CuO Nanostructures written by and published by . This book was released on 2012 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Oxide Based Heterostructures written by Naveen Kumar and published by Elsevier. This book was released on 2022-11-13 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide–Based Heterostructures: Fabrication and Applications provides information on synthesis strategies, structural and hierarchical features, morphological characteristics of metal oxide–based heterostructures, and their diverse applications. This book begins with an introduction to the various multidimensional heterostructures, synthesis aspects, and techniques used to control the formation of heterostructures. Then, the impact of synthesis routes on the formation of mixed metal oxide heterostructures and their properties are analyzed. The effect of nonmetal doping, metal doping, and composites of metal oxide heterostructures on the properties of heterostructures is also addressed and that also includes opportunities for optimization of the material’s performance for specific applications. Special attention is given to the surface characteristics of the metal oxide heterostructures and their impact on the material’s performance, and the applications of metal oxide heterostructures in various fields such as environmental remediation, sensing, organic catalysis, photovoltaics, light emitting materials, and hydrogen production. Introduces key principles for metal oxide heterostructures, their properties, key characteristics, and synthesis routes Emphasizes the relationship between synthesis strategies and material performance, including optimization strategies such as tailoring the material’s surface characteristics or structure Discusses metal oxide heterostructures and their application in lighting and displays, energy, environment, and sensing
Download or read book Nanocatalysis written by Vivek Polshettiwar and published by John Wiley & Sons. This book was released on 2013-09-06 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exhibiting both homogeneous and heterogeneous catalytic properties, nanocatalysts allow for rapid and selective chemical transformations, with the benefits of excellent product yield and ease of catalyst separation and recovery. This book reviews the catalytic performance and the synthesis and characterization of nanocatalysts, examining the current state of the art and pointing the way towards new avenues of research. Moreover, the authors discuss new and emerging applications of nanocatalysts and nanocatalysis, from pharmaceuticals to fine chemicals to renewable energy to biotransformations. Nanocatalysis features contributions from leading research groups around the world. These contributions reflect a thorough review of the current literature as well as the authors’ first-hand experience designing and synthesizing nanocatalysts and developing new applications for them. The book’s nineteen chapters offer a broad perspective, covering: Nanocatalysis for carbon-carbon and carbon-heteroatom coupling reactions Nanocatalysis for various organic transformations in fine chemical synthesis Nanocatalysis for oxidation, hydrogenation, and other related reactions Nanomaterial-based photocatalysis and biocatalysis Nanocatalysts to produce non-conventional energy such as hydrogen and biofuels Nanocatalysts and nano-biocatalysts in the chemical industry Readers will also learn about the latest spectroscopic and microscopy tools used in advanced characterization methods that shed new light on nanocatalysts and nanocatalysis. Moreover, the authors offer expert advice to help readers develop strategies to improve catalytic performance. Summarizing and reviewing all the most important advances in nanocatalysis over the last two decades, this book explains the many advantages of nanocatalysts over conventional homogeneous and heterogeneous catalysts, providing the information and guidance needed for designing green, sustainable catalytic processes.
Download or read book Photo Catalytic Activity of Ag N Co Doped ZnO CuO Nano Composite written by Jemal Mohammed and published by LAP Lambert Academic Publishing. This book was released on 2016-01-12 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nano-size Ag-N co-doped ZnO/CuO composites have been synthesized and tested for their photo-catalytic activity towards degradation of methyl orange in aqueous solution under visible as well as UV radiations. Crystal structure, surface functional groups, metallic composition and band structure of as-synthesized nano-material were investigated using XRD, FTIR, AAS and UV-Vis spectroscopic techniques, respectively. Ag-N co-doped ZnO/CuO photo-catalyst showed higher photo-catalytic activity than Ag- or N-doped and undoped composite photo-catalysts. The observed highest activity of Ag-N co-doped ZnO/CuO among the studied photo-catalysts, is attributed to the cumulative effects of lowering of band-gap energy and decrease of recombination rate of photo-generated electrons and holes owing to doped N and Ag, respectively. Effects of photo-catalyst load, solution pH and substrate initial concentration on the degradation of methyl orange have also been studied.
Download or read book Formation Mechanisms and Photocatalytic Properties of ZnO based Nanomaterials written by Natalie Herring and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Zinc Oxide (ZnO) is one of the most extensively studied semiconductors because of its unique properties, namely, its wide band gap (3.37 eV) and high excitation binding energy (60 meV). These properties make ZnO a promising material for uses in a broad range of applications including sensors, catalysis and optoelectronic devices. The presented research covers a broad spectrum of these interesting nanomaterials, from their synthesis and characterization to their use as photocatalyts. A new synthetic approach for producing morphology controlled ZnO nanostructures was developed using microwave irradiation (MWI). The rapid decomposition of zinc acetate in the presence of a mixture of oleic acid (OAC) and oleylamine (OAM) results in the formation of hexagonal ZnO nanopyramids and ZnO rods of varying aspect ratios. The factors that influence the morphology of these ZnO nanostructures were investigated. Using ligand exchange, the ZnO nanostructures can be dispersed in aqueous medium, thus allowing their use as photocatalysts for the degradation of malachite green dye in water. Photocatalytic activity is studied as a function of morphology; and, the ZnO nanorods show enhanced photocatalytic activity for the degradation of the dye compared to hexagonal ZnO nanopyramids. After demonstrating the catalytic activity of these ZnO nanostructures, various ways to enhance photocatalytic activity were studied by modification of this MWI method. Photocatalytic activity is enhanced through band gap modulation and the reduction of electron-hole recombination. Several approaches were studied, which included the incorporation of Au nanoparticles, N-doping of ZnO, supporting ZnO nanostructures on reduced graphene oxide (RGO), and supporting N-doped ZnO on N-doped RGO. ZnO-based nanostructures were studied systematically through the entire process from synthesis and characterization to their use as photocatalysis. This allows for a thorough understanding of the parameters that impact these processes and their unique photocatalytic properties.
