Download or read book Synthesis and Characterization of Transition Metal Oxides and Dichalcogenides and Their Application in Organic Photovoltaics written by Diego Barrera Mendez and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book SYNTHESIS CHARACTERIZATION AND APPLICATION OF 2D TRANSITION METAL DICHALCOGENIDES written by and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract : The rapid development of two-dimensional (2D) materials has led to tremendous interest in the study of graphene and a series of mono- and few-layered transition metal dichalcogenides (TMDCs). One major attraction of TMDCs is their semiconducting nature with indirect to direct bandgap transition, when thinned from bulk to few- and mono- layers. Molybdenum disulfide (MoS2) is one of the 2D TMDCs that has gained increasing attention due to its promising optical, electronic, and optoelectronic properties. In this thesis, I will discuss my research on the synthesis of 2D MoS2 and the characterization of its optical properties by Raman, Photoluminescence (PL) and UV-Vis spectroscopy. Next, the application of 2D TMDCs for FETs and solar cells will be reviewed. Finally, my extended work on the oxide form (transition metal oxides) and zero-dimensional (0D) form of TMDCs will be discussed. Efficient solar cells constructed by MoO3 and other oxides, and the future application of 0D TMDCs will also be evaluated.
Download or read book Synthesis and Characterization of Transition Metal Based Dyes for the Application in Dye Sensitized Solar Cells written by and published by . This book was released on 2014 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Colloidal Metal Oxide Nanoparticles written by and published by Elsevier. This book was released on 2019-10-16 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Colloidal Metal Oxide Nanoparticles: Synthesis, Characterization and Applications is a one-stop reference for anyone with an interest in the fundamentals, synthesis and applications of this interesting materials system. The book presents a simple, effective and detailed discussion on colloidal metal oxide nanoparticles. It begins with a general introduction of colloidal metal oxide nanoparticles, then delves into the most relevant synthesis pathways, stabilization procedures, and synthesis and characterization techniques. Final sections discuss promising applications, including bioimaging, biosensing, diagnostic, and energy applications—i.e., solar cells, supercapacitors and environment applications—i.e., the treatment of contaminated soil, water purification and waste remediation. Provides the most comprehensive resource on the topic, from fundamentals, to synthesis and characterization techniques Presents key applications, including biomedical, energy, electronic and environmental Discusses the most relevant techniques for synthesis, patterning and characterization
Download or read book Transition Metal Oxides for Electrochemical Energy Storage written by Jagjit Nanda and published by John Wiley & Sons. This book was released on 2022-03-28 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transition Metal Oxides for Electrochemical Energy Storage Explore this authoritative handbook on transition metal oxides for energy storage Metal oxides have become one of the most important classes of materials in energy storage and conversion. They continue to have tremendous potential for research into new materials and devices in a wide variety of fields. Transition Metal Oxides for Electrochemical Energy Storage delivers an insightful, concise, and focused exploration of the science and applications of metal oxides in intercalation-based batteries, solid electrolytes for ionic conduction, pseudocapacitive charge storage, transport and 3D architectures and interfacial phenomena and defects. The book serves as a one-stop reference for materials researchers seeking foundational and applied knowledge of the titled material classes. Transition Metal Oxides offers readers in-depth information covering electrochemistry, morphology, and both in situ and in operando characterization. It also provides novel approaches to transition metal oxide-enabled energy storage, like interface engineering and three-dimensional nanoarchitectures. Readers will also benefit from the inclusion of: A thorough introduction to the landscape and solid-state chemistry of transition metal oxides for energy storage An exploration of electrochemical energy storage mechanisms in transition metal oxides, including intercalation, pseudocapacitance, and conversion Practical discussions of the electrochemistry of transition metal oxides, including oxide/electrolyte interfaces and energy storage in aqueous electrolytes An examination of the characterization of transition metal oxides for energy storage Perfect for materials scientists, electrochemists, inorganic chemists, and applied physicists, Transition Metal Oxides for Electrochemical Energy Storage will also earn a place in the libraries of engineers in power technology and professions working in the electrotechnical industry seeking a one-stop reference on transition metal oxides for energy storage.
Download or read book Synthesis and Characterization of Mixed Transition Metal Oxides and Their Composites with Carbon for Energy Storage Applications written by Tarekegn Heliso Dolla and published by . This book was released on 2019 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design Synthesis and Characterization of Transition Metal Oxide Nanomaterials as Efficient Sorbents and Multifunctional Catalysts for Oxidation Dehydrogenative Coupling and Desulfurization Reactions written by Chandima Weerakkody and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The research work presented here is focused on nanotechnological synthetic approaches for transition metal oxide nanomaterials and their applications in heterogeneous catalysis and adsorptive desulfurization reactions. Here, we discuss the controllable synthesis of functional nanomaterials and investigation of their structure-activity relationship in multiphase catalytic and sorption reactions. Among transition metal oxides, Co3O4 is well known for the presence of mobile oxygen, and thus is more reactive towards oxidation reactions. Aerobic oxidation under additive free conditions is highly desirable in organic synthesis reactions, from the viewpoint of green and sustainable chemistry. We demonstrate the activity enhancement of mesoporous cobalt oxide materials by substitutional doping of molybdenum ions. We discuss the surface chemistry in the production of active metal oxide nanoparticles and effect of lattice deformation on creating surface defects. High conversion and selectivity was achieved by controlling the surface area, Lewis acidity, and oxygen vacancy density of the solid catalyst in the liquid phase dehydrogenative coupling reactions. Synthesis of high surface area mesoporous cobalt molybdenum mixed metal oxide materials was accomplished using surfactant assisted inverse micelle method. The cobalt molybdenum oxide materials were investigated as a efficient desulfurization sorbent in a fixed bed reactor at low temperatures ( C).
Download or read book Design Synthesis and Characterization of Transition Metal Oxide Nanomaterials for Emerging Catalytic Applications written by Dharmarathna Arachchige Saminda Dharmarathna and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Synthesis Properties and Applications of Oxide Nanomaterials written by José A. Rodriguez and published by John Wiley & Sons. This book was released on 2007-03-30 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current oxide nanomaterials knowledge to draw from and build on Synthesis, Properties, and Applications of Oxide Nanomaterials summarizes the existing knowledge in oxide-based materials research. It gives researchers one comprehensive resource that consolidates general theoretical knowledge alongside practical applications. Organized by topic for easy access, this reference: * Covers the fundamental science, synthesis, characterization, physicochemical properties, and applications of oxide nanomaterials * Explains the fundamental aspects (quantum-mechanical and thermodynamic) that determine the behavior and growth mode of nanostructured oxides * Examines synthetic procedures using top-down and bottom-up fabrication technologies involving liquid-solid or gas-solid transformations * Discusses the sophisticated experimental techniques and state-of-the-art theory used to characterize the structural and electronic properties of nanostructured oxides * Describes applications such as sorbents, sensors, ceramic materials, electrochemical and photochemical devices, and catalysts for reducing environmental pollution, transforming hydrocarbons, and producing hydrogen With its combination of theory and real-world applications plus extensive bibliographic references, Synthesis, Properties, and Applications of Oxide Nanomaterials consolidates a wealth of current, complex information in one volume for practicing chemists, physicists, and materials scientists, and for engineers and researchers in government, industry, and academia. It's also an outstanding reference for graduate students in chemistry, chemical engineering, physics, and materials science.
Download or read book Metal Oxides for Optoelectronics and Optics Based Medical Applications written by Suresh Sagadevan and published by Elsevier. This book was released on 2022-07-01 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxides for Optoelectronics and Optics-based Medical Applications reviews recent advances in metal oxides and their mechanisms for optoelectronic, photoluminescent and medical applications. In addition, the book examines the integration of key chemistry concepts with nanoelectronics that can improve performance in a diverse range of applications. Sections place a strong emphasis on synthesis processes that can improve the metal oxides’ physical properties and the reflected surface chemical changes that can impact their performance in various devices like light-emitting diodes, luminescence materials, solar cells, etc. Finally, the book discusses the challenges associated with the handling and maintenance of metal oxides crystalline properties. This book will be suitable for academics and those working in R&D in industry looking to learn more about cheaper and more effective methods to produce metal oxides for use in the fields of electronics, photonics, biophotonics and engineering. Reviews the latest advances in the utilization of metal oxide materials in photonics, optoelectronics and optics-based medical applications Considers the most relevant synthesis strategies for the development of high-performing metal oxide-based devices Addresses a wide range of metal oxides including photonic crystals, fibers, metastructures, glasses, and more
Download or read book Metal Oxide Based Photocatalysis written by Adriana Zaleska-Medynska and published by Elsevier. This book was released on 2018-04-09 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide-Based Photocatalysis: Fundamentals and Prospects for Application explains the principles and fundamentals of metal oxide-based photocatalysis and the requirements necessary for their use in photocatalysis. It also discusses preparation methods for photocatalysis, and the advantages, disadvantages and achievements of the most important metal oxides (TiO2, ZnO, Fe2O3, Ta2O3, CuO, NiO, Cr2O3, RuO2, etc.). The book concludes with the most important photocatalytic applications and an overview of the future. Applications are organized by potential needs and solutions, addressing such areas as water treatment, hydrogen production, air treatment, chemical synthesis, and applications in medicine and construction. Provides coverage of applications, presenting needs and solutions Covers essential applications, such as water treatment, hydrogen production, air depollution, medical applications, and much more Includes the characterization of the most important metal oxides used in heterogeneous photocatalysis
Download or read book Metal Oxides for Next generation Optoelectronic Photonic and Photovoltaic Applications written by Vijay Kumar and published by Elsevier. This book was released on 2023-09-15 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxides for Next Generation Optoelectronic, Photonic and Photovoltaic Applications focuses on the optoelectronic, photonic and photovoltaic behaviors of metallic oxides and closely related phenomena, from elementary principles to the latest findings. Each chapter includes a comprehensive evaluation of the synthesis and characterization of the most relevant metal oxides nanostructures for each application. In addition, there is a focus on methods to tune the materials’ properties in order to improve devices performance. This book is suitable for researchers and practitioners in academia and industry working in the disciplines of materials science and engineering, chemistry and physics. Metal oxides are widely used in various optoelectronic devices, photonics, display devices, smart windows, sensors, optical components, energy-saving, and harvesting devices. Each application requires materials with their own specific properties. By controlling the particle size, shape, crystal structure, one can tune various properties of metal oxides viz. bandgap, absorption properties, conductivity, which alter the material for the specific application. Includes discussions of synthesis and characterization of metal oxides materials for applications in next-generation optoelectronic, photonic and photovoltaic devices Emphasizes material design strategies of metal oxide nanostructures Focuses on the optoelectronic, photonic and photovoltaic behaviors of metallic oxides and closely related phenomena, from elementary principles to the latest findings
Download or read book Synthesis and Characterization of New Layered Main Group transition Metal Oxides written by Daniel Mark Giaquinta and published by . This book was released on 1994 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Synthesis and Characterisation of Transition Metal Oxides for Potential Multiferroic and Photocatalytic Applications written by J. Jackson and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Oxides written by J.L.G. Fierro and published by CRC Press. This book was released on 2005-08-24 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt: The chemistry of metals has traditionally been more understood than that of its oxides. As catalytic applications continue to grow in a variety of disciplines, Metal Oxides: Chemistry and Applications offers a timely account of transition-metal oxides (TMO), one of the most important classes of metal oxides, in the context of catalysis. The
Download or read book Synthesis and Characterization of the Layered Transition Metal Oxides AxNbO2 A written by Maria Anna Rzeznik and published by . This book was released on 1995 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design Synthesis and Characterization of Transition Metal Oxide Based Functional Materials for Multi phase Catalytic Applications written by Chung-Hao Kuo and published by . This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
