Download or read book Polymer layered Silicate Nanocomposites written by Masami Okamoto and published by iSmithers Rapra Publishing. This book was released on 2003 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: The review sets out to highlight the major developments in this field over the last decade. The different techniques used to prepare PLS nanocomposites are covered. The physicochemical characterisation of PLS nanocomposites and the improved materials properties that those materials can display are discussed. An additional indexed section containing several hundred abstracts from the Rapra Polymer Library database provides useful references for further reading.
Download or read book Synthesis Techniques for Polymer Nanocomposites written by Vikas Mittal and published by John Wiley & Sons. This book was released on 2014-10-16 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book series 'Polymer Nano-, Micro- and Macrocomposites' provides complete and comprehensive information on all important aspects of polymer composite research and development, including, but not limited to synthesis, filler modification, modeling, characterization as well as application and commercialization issues. Each book focuses on a particular topic and gives a balanced in-depth overview of the respective subfield of polymer composite science and its relation to industrial applications. With the books the readers obtain dedicated resources with information relevant to their research, thereby helping to save time and money. Summarizing all the most important synthesis techniques used in the lab as well as in industry, this book is comprehensive in its coverage from chemical, physical and mechanical viewpoints. This book helps readers to choose the correct synthesis route, such as suspension and miniemulsion polymerization, living polymerization, sonication, mechanical methods or the use of radiation, and so achieve the desired composite properties.
Download or read book Polymer Clay Nanocomposites written by T. J. Pinnavaia and published by Wiley. This book was released on 2001-01-19 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer-clay nanocomposites are formed through the union of two very different materials with organic and mineral pedigrees. The hybrid compositions, however, exhibit large increases in tensile strength, modulus, and heat distortion temperature as compared with the pristine polymer. The composites also have lower water sensitivity, reduced permeability to gases, and a similar thermal coefficient of expansion. All of these property improvements can be realized without a loss of clarity in the polymer. Further, it has been found that nanocomposites impart a level of flame retardance and UV resistance not present in the pure polymer. These improvements in performance properties at relatively low clay loading (typically 2 -10wt %) have stimulated intensive research in both industry and academia over the past decade. Polymer-Clay Nanocomposites presents the first comprehensive overview of the state of the art of these materials since they were first reported a decade ago. Covering both the theory and practical applications, this volume in the 'Wiley Series in Polymer Science' covers the key aspects of these important materials including: * Polymer-clay intercalates * The preparation and general properties of special practical and commercial significance (including strength, stiffness, toughness, permeability, fire retardation and chemical stability) * The elucidation of the structural and rheological factors influencing performance and processing properties Polymer-Clay Nanocomposites is an indispensable text for polymer scientists, composites formulators, materials engineers, resin producers, filters and additive producers as well as university lecturers, and organic and inorganic chemists working in this important and fascinating area.
Download or read book Eco friendly Polymer Nanocomposites written by Vijay Kumar Thakur and published by Springer. This book was released on 2015-07-20 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains precisely referenced chapters, emphasizing environment-friendly polymer nanocomposites with basic fundamentals, practicality and alternatives to traditional nanocomposites through detailed reviews of different environmental friendly materials procured from different resources, their synthesis and applications using alternative green approaches. The book aims at explaining basics of eco-friendly polymer nanocomposites from different natural resources and their chemistry along with practical applications which present a future direction in the biomedical, pharmaceutical and automotive industry. The book attempts to present emerging economic and environmentally friendly polymer nanocomposites that are free from side effects studied in the traditional nanocomposites. This book is the outcome of contributions by many experts in the field from different disciplines, with various backgrounds and expertises. This book will appeal to researchers as well as students from different disciplines. The content includes industrial applications and will fill the gap between the research works in laboratory to practical applications in related industries.
Download or read book Clay Polymer Nanocomposites written by Khouloud Jlassi and published by Elsevier. This book was released on 2017-07-26 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clay–Polymer Nanocomposites is a complete summary of the existing knowledge on this topic, from the basic concepts of synthesis and design to their applications in timely topics such as high-performance composites, environment, and energy issues. This book covers many aspects of synthesis such as in- situ polymerization within the interlamellar spacing of the clays or by reaction of pristine or pre-modified clays with reactive polymers and prepolymers. Indeed, nanocomposites can be prepared at industrial scale by melt mixing. Regardless the synthesis method, much is said in this book about the importance of theclay pre-modification step, which is demonstrated to be effective, on many occasions, in obtaining exfoliated nanocomposites. Clay–Polymer Nanocomposites reports the background to numerous characterization methods including solid state NMR, neutron scattering, diffraction and vibrational techniques as well as surface analytical methods, namely XPS, inverse gas chromatography and nitrogen adsorption to probe surface composition, wetting and textural/structural properties. Although not described in dedicated chapters, numerous X-ray diffraction patterns of clay–polymer nanocomposites and reference materials are displayed to account for the effects of intercalation and exfoliations of layered aluminosilicates. Finally, multiscale molecular simulation protocols are presenting for predicting morphologies and properties of nanostructured polymer systems with industrial relevance. As far as applications are concerned, Clay–Polymer Nanocomposites examines structural composites such as clay–epoxy and clay–biopolymers, the use of clay–polymer nanocomposites as reactive nanocomposite fillers, catalytic clay-(conductive) polymers and similar nanocomposites for the uptake of hazardous compounds or for controlled drug release, antibacterial applications, energy storage, and more. - The most comprehensive coverage of the state of the art in clay–polymer nanocomposites, from synthesis and design to opportunities and applications - Covers the various methods of characterization of clay–polymer nanocomposites - including spectroscopy, thermal analyses, and X-ray diffraction - Includes a discussion of a range of application areas, including biomedicine, energy storage, biofouling resistance, and more
Download or read book Nanoclay Reinforced Polymer Composites written by Mohammad Jawaid and published by Springer. This book was released on 2016-08-12 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is part of a two-volume book series that exhaustively reviews the key recent research into nanoclay reinforced polymer composites. This second volume focuses on nanoclay based nanocomposites and bionanocomposites fabrication, characterization and applications. This includes classification of nanoclay, chemical modification and processing techniques of nanocomposites. The book also provides comprehensive information about nanoclay modification and functionalization; modification of nanoclay systems, geological and mineralogical research on clays suitability; bio-nanocomposites based on nanoclays; modelling of mechanical behaviour of halloysite based composites; mechanical and thermal properties of halloysite nanocomposites; the effect of Nanoclays on gas barrier properties of polymers and modified nanocomposites. This book is a valuable reference guide for academics and industrial practitioners alike.
Download or read book Handbook of Polymer and Ceramic Nanotechnology written by Chaudhery Mustansar Hussain and published by Springer. This book was released on 2021-09-13 with total page 1667 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook examines the recent advances in the nanotechnology of polymers and ceramics, which possess outstanding mechanical properties and compatibility given their unique physical and chemical properties caused by the unusually large surface area to volume ratios and high interfacial reactivity. This handbook highlights the various compositions and morphologies of polymer and ceramic nanomaterials that can serve as powerful tools for the diverse applications in areas such as electronics, photonics, shape-memory alloys, biomaterials and biomedical nanomaterials, graphene-based technologies, and textiles and packaging. The handbook addresses safety, economics, green production and sustainability. The book contains a section on functionalization of these molecules, which only increases the possibility of developing even more versatile materials that can be fine-tuned for specific applications. Filling a gap in the literature, this handbook provides comprehensive coverage of properties, fabrication, characterization, functionalization methods and applications at both experimental and theoretical models scales. Economic, toxicological, regulatory, and environmental concerns regarding applications are also discussed in detail. Special attention is paid to sustainable approaches that reduce costs in terms of chemicals and time consumption. The book covers research trends, challenges, and prospective topics as well.
Download or read book Comprehensive Nanoscience and Technology written by and published by Academic Press. This book was released on 2010-10-29 with total page 2785 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the Introduction: Nanotechnology and its underpinning sciences are progressing with unprecedented rapidity. With technical advances in a variety of nanoscale fabrication and manipulation technologies, the whole topical area is maturing into a vibrant field that is generating new scientific research and a burgeoning range of commercial applications, with an annual market already at the trillion dollar threshold. The means of fabricating and controlling matter on the nanoscale afford striking and unprecedented opportunities to exploit a variety of exotic phenomena such as quantum, nanophotonic and nanoelectromechanical effects. Moreover, researchers are elucidating new perspectives on the electronic and optical properties of matter because of the way that nanoscale materials bridge the disparate theories describing molecules and bulk matter. Surface phenomena also gain a greatly increased significance; even the well-known link between chemical reactivity and surface-to-volume ratio becomes a major determinant of physical properties, when it operates over nanoscale dimensions. Against this background, this comprehensive work is designed to address the need for a dynamic, authoritative and readily accessible source of information, capturing the full breadth of the subject. Its six volumes, covering a broad spectrum of disciplines including material sciences, chemistry, physics and life sciences, have been written and edited by an outstanding team of international experts. Addressing an extensive, cross-disciplinary audience, each chapter aims to cover key developments in a scholarly, readable and critical style, providing an indispensible first point of entry to the literature for scientists and technologists from interdisciplinary fields. The work focuses on the major classes of nanomaterials in terms of their synthesis, structure and applications, reviewing nanomaterials and their respective technologies in well-structured and comprehensive articles with extensive cross-references. It has been a constant surprise and delight to have found, amongst the rapidly escalating number who work in nanoscience and technology, so many highly esteemed authors willing to contribute. Sharing our anticipation of a major addition to the literature, they have also captured the excitement of the field itself in each carefully crafted chapter. Along with our painstaking and meticulous volume editors, full credit for the success of this enterprise must go to these individuals, together with our thanks for (largely) adhering to the given deadlines. Lastly, we record our sincere thanks and appreciation for the skills and professionalism of the numerous Elsevier staff who have been involved in this project, notably Fiona Geraghty, Megan Palmer and Greg Harris, and especially Donna De Weerd-Wilson who has steered it through from its inception. We have greatly enjoyed working with them all, as we have with each other.
Download or read book Research Anthology on Synthesis Characterization and Applications of Nanomaterials written by Information Resources Management Association and published by Engineering Science Reference. This book was released on 2021 with total page 2500 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This reference of contributed chapters seeks to address not only how nanomaterials are created, used, or characterized, but also to apply this knowledge to the multidimensional industries, fields, and applications of nanomaterials and nanoscience by including topics such as both natural and manmade nanomaterials; the size, shape, reactivity, and other essential characteristics of nanomaterials; challenges and potential effects of using nanomaterials; and the advantages of nanomaterials with multidisciplinary uses"--
Download or read book Silica and Clay Dispersed Polymer Nanocomposites written by Md Rezaur Rahman and published by Woodhead Publishing. This book was released on 2018-06-13 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: The production of 'polymer nanocomposites' has recently gained considerable attention from both the academic and industrial community, especially in the area of nanoscience. This is mainly due to their enhanced improvements in physico-mechanical, thermal and barrier properties compared to micro and more conventional composites. Their nanoscale dimensions, biodegradable character, cost-effectiveness and sustainability have constituted a stimulus for this increasing interest. Currently there is no limit to the possibility of applications. However, despite all this progress, it is still difficult to achieve uniform dispersion between the filler and the matrix, as agglomerations form far too easily and the production of polymer nanocomposites with high mechanical and thermal properties is still limited. The authors of this proposed book, are of the opinion, that with the increase in scientific publications and the rapid progress in processing possibilities to produce nanocomposites based on various nanoscale fillers (silica/clay), a book that collects all of these scientific findings in one place would be timely and of great interest to both students and scientific researchers, who are concerned with the production, and application of nanocomposites as new innovative materials. The authors aim is to present the latest research findings on the fabrication, properties and applications of nanofillers as reinforcement in polymer nanocomposites. Particular emphasis will be placed on the introduction of various nanofillers (silica/clay) into different elastomeric polymer matrices that will enhance the properties of these materials and their applications. The book will provide an up-to-date review of major innovations in the field and act as a reference for future research in materials science and engineering, which is highly topical due to the demand to produce more sustainable and eco-friendly innovative advanced materials from elastomeric polymers. - Emphasis on silica/clay as outstanding reinforcing potential in elastomeric polymer matrices - Up-to-date on the most relevant innovations in the field of silica/clay nanocomposites and their extensive applications in advanced material science - Establishes the most suitable fabrication methods, properties and applications as a solid foundation in materials science and engineering disciplines - Includes the incorporation of dual nanofillers that significantly improve the properties of nanocomposites
Download or read book Polymer Nanoclay Composites written by Stephan Laske and published by William Andrew. This book was released on 2015-01-09 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a major lack of fundamental knowledge and understanding on the interaction between a filler and the polymer matrix. When it comes to nanoscale fillers, such as layered silicates, carbon nanotubes, graphene or cellulose nanofibers it is even more important to know accurate structure-property relationships as well as identifying the parameters influencing material behavior. The reason for the lack of knowledge on how to process nanocomposites and why there are so few applications is that several scientific fields are affected and a joint effort of those scientific communities involved is necessary – starting from the filler manufacturing or pre-processing over polymer chemistry to the polymer processing. In Polymer Nanoclay Composites, all involved scientific areas are viewed together for the first time, providing an all-embracing coverage of all stages of polymer clay nanocomposites processing from lab-scale to industrial scale – stages from the raw material over manufacturing of polymer clay nanocomposites to characterization and the final products. Readers will gain insight in the physical/chemical pre-processing of layered silicates and their incorporation into a polymer matrix using sophisticated technologies (such as advanced compounding) as well as in real-time quality control of the nanocomposite production and future prospects. The book also describes nanotoxicological and nanosafety aspects. - Covers the whole processing route with all aspects of the nanocomposites industry with particular focus on the processing of polymer clay nanocomposites - Includes quality control and nanosafety - Multidisciplinary approach from an industrial perspective
Download or read book Synthesis and Characterization of Polymer Matrix Nanocomposites and Their Components written by Shelly Dawn Burnside and published by . This book was released on 1997 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals Properties and Applications of Polymer Nanocomposites written by Joseph H. Koo and published by Cambridge University Press. This book was released on 2016-10-31 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is focused primarily on polymer nanocomposites, based on the author's research experience as well as open literature. The environmental health and safety aspects of nanomaterials and polymer nanocomposites, risk assessment and safety standards, and fire toxicity of polymer nanocomposites, are studied. In the final chapter, a brief overview of opportunities, trends, and challenges of polymer nanocomposites are included. Throughout the book, the theme is developed that polymer nanocomposites are a whole family of polymeric materials whose properties are capable of being tailored to meet specific applications. This volume serves as a general introduction to students and researchers just entering the field and to scholars from other subfields seeking information.
Download or read book Nanocomposite Materials written by Erich Kny and published by Trans Tech Publications Ltd. This book was released on 2009-04-16 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from 2008 EMRS Symposium F: Nanocomposite materials in Warsaw in September 2008
Download or read book Polymer Composites Nanocomposites written by Sabu Thomas and published by John Wiley & Sons. This book was released on 2013-08-06 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer composites are materials in which the matrix polymer is reinforced with organic/inorganic fillers of a definite size and shape, leading to enhanced performance of the resultant composite. These materials find a wide number of applications in such diverse fields as geotextiles, building, electronics, medical, packaging, and automobiles. This first systematic reference on the topic emphasizes the characteristics and dimension of this reinforcement. The authors are leading researchers in the field from academia, government, industry, as well as private research institutions across the globe, and adopt a practical approach here, covering such aspects as the preparation, characterization, properties and theory of polymer composites. The book begins by discussing the state of the art, new challenges, and opportunities of various polymer composite systems. Interfacial characterization of the composites is discussed in detail, as is the macro- and micromechanics of the composites. Structure-property relationships in various composite systems are explained with the help of theoretical models, while processing techniques for various macro- to nanocomposite systems and the influence of processing parameters on the properties of the composite are reviewed in detail. The characterization of microstructure, elastic, viscoelastic, static and dynamic mechanical, thermal, tribological, rheological, optical, electrical and barrier properties are highlighted, as well as their myriad applications. Divided into three volumes: Vol. 1. Macro- and Microcomposites; Vol. 2. Nanocomposites; and Vol. 3. Biocomposites.
Download or read book Inorganic Polymeric Nanocomposites and Membranes written by Akihiro Abe and published by Springer. This book was released on 2005-07-12 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: This series presents critical reviews of the present and future trends in polymer and biopolymer science including chemistry, physical chemistry, physics and materials science. It is addressed to all scientists at universities and in industry who wish to keep abreast of advances in the topics covered. Impact Factor Ranking: Always number one in Polymer Science. More information as well as the electronic version of the whole content available at: www.springerlink.com
Download or read book Research Anthology on Synthesis Characterization and Applications of Nanomaterials written by Management Association, Information Resources and published by IGI Global. This book was released on 2021-03-19 with total page 1917 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of nanotechnologies continues to grow, as nanomaterials have proven their versatility and use in many different fields and industries within the scientific profession. Using nanotechnology, materials can be made lighter, more durable, more reactive, and more efficient leading nanoscale materials to enhance many everyday products and processes. With many different sizes, shapes, and internal structures, the applications are endless. These uses range from pharmaceutics to materials such as cement or cloth, electronics, environmental sustainability, and more. Therefore, there has been a recent surge of research focused on the synthesis and characterizations of these nanomaterials to better understand how they can be used, their applications, and the many different types. The Research Anthology on Synthesis, Characterization, and Applications of Nanomaterials seeks to address not only how nanomaterials are created, used, or characterized, but also to apply this knowledge to the multidimensional industries, fields, and applications of nanomaterials and nanoscience. This includes topics such as both natural and manmade nanomaterials; the size, shape, reactivity, and other essential characteristics of nanomaterials; challenges and potential effects of using nanomaterials; and the advantages of nanomaterials with multidisciplinary uses. This book is ideally designed for researchers, engineers, practitioners, industrialists, educators, strategists, policymakers, scientists, and students working in fields that include materials engineering, engineering science, nanotechnology, biotechnology, microbiology, drug design and delivery, medicine, and more.
