EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book Synthesis and Characterization of Macrocyclic Poly 2 vinyl Pyridine and Macrocyclic Polystyrene Thermochemical and NMR Studies

Download or read book Synthesis and Characterization of Macrocyclic Poly 2 vinyl Pyridine and Macrocyclic Polystyrene Thermochemical and NMR Studies written by Janakiraman Sundararajan and published by . This book was released on 1991 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Macrocycles

Download or read book Macrocycles written by Frank Davis and published by John Wiley & Sons. This book was released on 2011-02-23 with total page 1069 pages. Available in PDF, EPUB and Kindle. Book excerpt: Macrocyclic molecules contain rings made up of seven or more atoms. They are interesting because they provide building blocks for synthesizing precise two or three dimensional structures – an important goal in nanotechnology. For example, they can be used to develop nanosized reaction vessels, cages, switches and shuttles, and have potential as components in molecular computers. They also have applications as catalysts and sensors. Macrocycles: Construction, Chemistry and Nanotechnology Applications is an essential introduction this important class of molecules and describes how to synthesise them, their chemistry, how they can be used as nanotechnology building blocks, and their applications. A wide range of structures synthesised over the past few decades are covered, from the simpler cyclophanes and multi-ring aromatic structures to vases, bowls, cages and more complex multi-ring systems and 3D architectures such as “pumpkins”, interlocking chains and knots. Topics covered include: principles of macrocycle synthesis simple ring compounds multi-ring aromatic structures porphyrins and phthalocanines cyclophanes crown ethers, cryptands and spherands calixarenes, resorcinarenes, cavitands, carcerands, and heterocalixarenes cyclodextrins cucurbiturils cyclotriveratylenes rotaxanes catenanes complex 3D architectures, including trefoils and knots Macrocycles: Construction, Chemistry and Nanotechnology Applications distills the essence of this important topic for undergraduate and postgraduate students, and for researchers in other fields interested in getting a general insight into this increasingly important class of molecules.

Book Papers Presented at the Meeting

Download or read book Papers Presented at the Meeting written by American Chemical Society. Division of Polymer Chemistry and published by . This book was released on 1995 with total page 876 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Complex Macromolecular Architectures

Download or read book Complex Macromolecular Architectures written by Nikos Hadjichristidis and published by John Wiley & Sons. This book was released on 2011-04-20 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of CMA (complex macromolecular architecture) stands at the cutting edge of materials science, and has been a locus of intense research activity in recent years. This book gives an extensive description of the synthesis, characterization, and self-assembly of recently-developed advanced architectural materials with a number of potential applications. The architectural polymers, including bio-conjugated hybrid polymers with poly(amino acid)s and gluco-polymers, star-branched and dendrimer-like hyperbranched polymers, cyclic polymers, dendrigraft polymers, rod-coil and helix-coil block copolymers, are introduced chapter by chapter in the book. In particular, the book also emphasizes the topic of synthetic breakthroughs by living/controlled polymerization since 2000. Furthermore, renowned authors contribute on special topics such as helical polyisocyanates, metallopolymers, stereospecific polymers, hydrogen-bonded supramolecular polymers, conjugated polymers, and polyrotaxanes, which have attracted considerable interest as novel polymer materials with potential future applications. In addition, recent advances in reactive blending achieved with well-defined end-functionalized polymers are discussed from an industrial point of view. Topics on polymer-based nanotechnologies, including self-assembled architectures and suprastructures, nano-structured materials and devices, nanofabrication, surface nanostructures, and their AFM imaging analysis of hetero-phased polymers are also included. Provides comprehensive coverage of recently developed advanced architectural materials Covers hot new areas such as: click chemistry; chain walking; polyhomologation; ADMET Edited by highly regarded scientists in the field Contains contributions from 26 leading experts from Europe, North America, and Asia Researchers in academia and industry specializing in polymer chemistry will find this book to be an ideal survey of the most recent advances in the area. The book is also suitable as supplementary reading for students enrolled in Polymer Synthetic Chemistry, Polymer Synthesis, Polymer Design, Advanced Polymer Chemistry, Soft Matter Science, and Materials Science courses. Color versions of selected figures can be found at www.wiley.com/go/hadjichristidis

Book American Doctoral Dissertations

Download or read book American Doctoral Dissertations written by and published by . This book was released on 1995 with total page 896 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Synthesis and Morphology Characterization of Different Architecture of Amphiphilic Block Copolymers Polystyrene block poly 3 trimethoxysilyl propyl Methacrylate and Polystyrene block poly 2 dimethylamino ethyl Methacrylate

Download or read book Synthesis and Morphology Characterization of Different Architecture of Amphiphilic Block Copolymers Polystyrene block poly 3 trimethoxysilyl propyl Methacrylate and Polystyrene block poly 2 dimethylamino ethyl Methacrylate written by 徐榮慶 and published by . This book was released on 2007 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book

Download or read book written by and published by . This book was released on 1957 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Synthesis and Characterization of Ionically Bonded Diblock Copolymers

Download or read book Synthesis and Characterization of Ionically Bonded Diblock Copolymers written by Lei Feng (Chemical engineer) and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Block copolymers consist of two or more incompatible polymer chains linked by covalent bonds. These block copolymer can separate into nanometer sized domains whose morphology depends upon the size of the block and interactions between them. The properties of block copolymers can be modified and potentially improved by introducing noncovalent interactions to replace covalent linkages between blocks to form supramolecular block copolymers. These kinds of materials combine the microphase separation inherent to block copolymers with the facile synthesis of supramolecular materials thereby affording new and unique materials. This dissertation focuses on synthesis and characterization of PS-b-PMA block copolymers with ion-pair junctions.Firstly, the chain-end sulfonated polystyrene ([omega]-sulfonated PS) was synthesized by reversible addition fragmentation chain transfer (RAFT) polymerization and postpolymerization modification. In the postpolymerization modification two methods were investigated: in the first one, the polymer was converted to a thiol-terminated polymer by aminolysis. Then a sulfonic acid end-group was produced then by oxidation of the thiol end-group with m-chloroperoxybenzoicacid (m-CPBA); in the second method, the RAFT-polymerized polymer was directly sulfonated by oxidation with m-CPBA. After purification by column chromatography, [omega]-sulfonated PS was obtained by both methods with greater than 95% end-group functionality as measured by titration. The sulfonic acid end-group could be neutralized with various ammonium or imidazolium counter ions through acid-base or ionic metathesis reactions. These polymers with ionic end-group can be used as model supramolecular building blocks.Secondly, ammonium end functionalized polymethylacrylate (PMA) was synthesized directly by RAFT polymerization using functional RAFT agent. Then chain-end sulfonated polystyrene and ammonium end functionalized polymethylacrylate (PMA) were used to synthesize A-B block copolymers by two different methods: the first method was by mixing two oppositely charged end group functionalized polymers; the second method was to ionically bond a RAFT agent to the chain end of an end sulfonated polymer to generate a supramolecular macro RAFT agent then an A-B block copolymer was prepared by RAFT polymerization using supramolecular macro-RAFT agent. The polymerization kinetics were investigated and the molecular weight and the chemical structure of the block copolymers were characterized by 1H-NMR and SEC. The results show that the ion-bonded supramolecular block copolymer, PS-PMA, have been successfully prepared with controlled molecular weight and narrow distribution.Thirdly, the morphology of the ion-bonded supramolecular PS-PMA diblock copolymers were investigated by small-angle X-ray scattering (SAXS) and rheological techniques. Several covalently bonded PS-PMA block copolymers were synthesized by RAFT polymerization and their micro domain structures and rheology behaviors were also investigated. The results showed that the electrostatic interactions between the end ion groups are able to overcome the thermodynamic repulsion of two blocks result in the formation of diblock copolymers with similar behaviors and morphology of traditional covalent bonded diblock copolymers and their micro domain structures remain to high temperatures.

Book Synthesis and Self assembly Behavior of Poly fluorenylstyrene block poly 2 vinylpyridine Block Copolymers and Their Blends with Single Wall Carbon Nanotubes SWCNTs

Download or read book Synthesis and Self assembly Behavior of Poly fluorenylstyrene block poly 2 vinylpyridine Block Copolymers and Their Blends with Single Wall Carbon Nanotubes SWCNTs written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Synthesis and Characterization of Low Molecular Mass Amphiphilic Block Copolymers and Potential Use in Surfactant Assisted Particle Micro mixing

Download or read book Synthesis and Characterization of Low Molecular Mass Amphiphilic Block Copolymers and Potential Use in Surfactant Assisted Particle Micro mixing written by Ekaterini Karakatsanis and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: In industry the effective mixing and de-agglomeration of two solid particles is vital in applications that require the intimate contact of homogeneously mixed reagents. One such application is in the preparation of pyrotechnic delay elements with reproducible burn speeds. The concept of surfactant assisted particle micro-mixing is proposed. This theory is based in the use of two amphiphilic polymeric surfactants to form two separate stable dispersions of the two solid particles to be mixed, but with the subsequent requirement that the dispersants are able to interact with each other. The formation of the individual dispersions allows for the deagglomeration of the particles and thus their preparation for homogeneous mixing, which is facilitated by the interacting surfactants. Low molecular mass block copolymers of styrene and acrylic acid and poly(ethylene oxide)-poly(propylene oxide) (PEO-PPO) surfactants are the proposed dispersants which will allow for the surfactant interaction by means of hydrogen bonding between the poly(acrylic acid) block and the PEO. The poly(styrene-co-acrylic acid) block copolymer will be synthesised via Atom Transfer Radical Polymerisation (ATRP) and subsequently used in the dispersion experiments. The synthesis of the polystyrene macroinitiators to initiate the block copolymerisation of the t-butyl acrylate was carried out satisfactorily, with good molecular masses and molecular mass distributions. In addition, lH-NMR analysis carried out on the polystyrene macroinitiators confirmed their synthesis. The use of the polystyrene macroinitiators was successful in synthesising poly(styrene-co-t-butyl acrylate) block copolymers with slightly higher polydispersities in comparison to the macroinitiatiators themselves, but acceptable. Hydrolysis of the poly(styrene-co-t-butyl acrylate) block copolymer to poly(styrene-co-acrylic acid) was successful in the presence of trifluoroacetic acid as catalyst. Attempts to hydrolyse in basic conditions (NaOH) and alternatively in acidic conditions (HCI) were not successful. Use of the poly(styrene-co-acrylic acid) amphiphilic block copolymer to emulsion polymerise styrene requires the ionised form of the polymer and was therefore not favourable to observe surfactant-surfactant hydrogen bonding. In addition, attempts to synthesise a wax emulsion stabilised by a PEO containing surfactant proved to be unsuccessful. Subsequently, the micro-mixing experiments were carried out by using a poly(acrylic acid) stabilised melamine dispersion and a commercially available PEO containing surfactant stabilised wax emulsion. The interaction between the melamine and the poly(acrylic acid) allows for the formation of a stable melamine dispersion at above 7% poly(acrylic acid) : melamine ratio (mass basis). Analysis by SEM shows that without the poly(acrylic acid) dispersant no wax particles are found to occur on the melamine particle surface. However, in an attempt to determine whether the amount of wax interaction increases with poly(acrylic acid) content, it was found that in the absence of poly(acrylic acid) dispersant, the most amount of wax precipitated out with the melamine. This is possibly attributable to the preferential occlusion of the wax particles between the melamine particles rather than surface attachment. Introduction of the poly(acrylic acid), however, shows via SEM analysis that the hydrogen bond interaction between the acrylic acid group and the ethylene oxide group does occur, since the attachment of the wax particles on the melamine particle surface is observed. Although results show that the surfactant-surfactant interaction allows for the micro mixing of particles, some refinement is required with respect to the systems that this phenomenon can be applied to. In addition, factors such as particle type, particle size and surfactant type will influence the micro-mixing interaction. It is therefore recommended that these factors be investigated in order to completely identify the micro-mixing phenomenon.