Download or read book Representation Surfaces for Physical Properties of Materials written by Manuel Laso and published by Springer Nature. This book was released on 2020-04-04 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook presents all the mathematical and physical concepts needed to visualize and understand representation surfaces, providing readers with a reliable and intuitive understanding of the behavior and properties of anisotropic materials, and a sound grasp of the directionality of material properties. They will learn how to extract quantitative information from representation surfaces, which encode tremendous amounts of information in a very concise way, making them especially useful in understanding higher order tensorial material properties (piezoelectric moduli, elastic compliance and rigidity, etc.) and in the design of applications based on these materials. Readers will also learn from scratch concepts on crystallography, symmetry and Cartesian tensors, which are essential for understanding anisotropic materials, their design and application. The book describes how to apply representation surfaces to a diverse range of material properties, making it a valuable resource for material scientists, mechanical engineers, and solid state physicists, as well as advanced undergraduates in Materials Science, Solid State Physics, Electronics, Optics, Mechanical Engineering, Composites and Polymer Science. Moreover, the book includes a wealth of worked-out examples, problems and exercises to help further understanding.
Download or read book Computer Aided Surface Representation written by and published by . This book was released on 1989 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: The central research problem of this project is the effective representation and display of surfaces, interpolating to given information, in three or more dimensions. In a typical problem, we wish to create a surface from some discrete information. If this information is itself on another surface, the problem is to determine a surface defined on a surface, '' which is discussed below. Often, properties of an already constructed surface are desired: such geometry processing'' is described below. The Summary of Proposed Research from our original proposal describes the aims of this research project. This Summary and the Table of Contents from the original proposal are enclosed as an Appendix to this Progress Report. The broad sweep from constructive mathematics through algorithms and computer graphics displays is utilized in the research. The wide range of activity, directed in both theory and applications, makes this project unique. Last month in the first Ardent Titan delivered in the State of Arizona came to our group, funded by the DOE and Arizona State University. Although the Titan is a commercial product, its newness requires our close collaboration with Ardent to maximize results. During the past year, four faculty members and several graduate research assistants have worked on this DOE project. The gaining of new professionals is an important aspect of this project. A listing of the students and their topics is given in the Appendix. The most significant publication during the past year is the book, Curves and Surfaces for Computer Aided Geometric Design, by Dr. Gerald Farin. This 300 page volume helps fill a considerable gap in the subject and includes many new results on Bernstein-Bezier curves and surfaces.
Download or read book Advancing Earth Surface Representation via Enhanced Use of Earth Observations in Monitoring and Forecasting Applications written by Gianpaolo Balsamo and published by MDPI. This book was released on 2019-08-23 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: The representation of the Earth's surface in global monitoring and forecasting applications is moving towards capturing more of the relevant processes, while maintaining elevated computational efficiency and therefore a moderate complexity. These schemes are developed and continuously improved thanks to well instrumented field-sites that can observe coupled processes occurring at the surface–atmosphere interface (e.g., forest, grassland, cropland areas and diverse climate zones). Approaching global kilometer-scale resolutions, in situ observations alone cannot fulfil the modelling needs, and the use of satellite observation becomes essential to guide modelling innovation and to calibrate and validate new parameterization schemes that can support data assimilation applications. In this book, we review some of the recent contributions, highlighting how satellite data are used to inform Earth surface model development (vegetation state and seasonality, soil moisture conditions, surface temperature and turbulent fluxes, land-use change detection, agricultural indicators and irrigation) when moving towards global km-scale resolutions.
Download or read book Theory of Representation of Surfaces for Surveyors and Cartographers written by Franciszek Biernacki and published by . This book was released on 1965 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Curves and Surfaces for Computer Graphics written by David Salomon and published by Springer Science & Business Media. This book was released on 2007-03-20 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Requires only a basic knowledge of mathematics and is geared toward the general educated specialists. Includes a gallery of color images and Mathematica code listings.
Download or read book Lectures on Representations of Surface Groups written by François Labourie and published by . This book was released on 2013 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of these notes is the character variety of representations of a surface group in a Lie group. The author emphasizes the various points of view (combinatorial, differential, and algebraic) and is interested in the description of its smooth points, symplectic structure, volume and connected components. He also shows how a three manifold bounded by the surface leaves a trace in this character variety. These notes were originally designed for students with only elementary knowledge of differential geometry and topology. In the first chapters, the author does not focus on the details of the differential geometric constructions and refers to classical textbooks, while in the more advanced chapters proofs occasionally are provided only for special cases where they convey the flavor of the general arguments. These notes might also be used by researchers entering this fast expanding field as motivation for further studies. The concluding paragraph of every chapter provides suggestions for further research.
Download or read book The NURBS Book written by Les Piegl and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until recently B-spline curves and surfaces (NURBS) were principally of interest to the computer aided design community, where they have become the standard for curve and surface description. Today we are seeing expanded use of NURBS in modeling objects for the visual arts, including the film and entertainment industries, art, and sculpture. NURBS are now also being used for modeling scenes for virtual reality applications. These applications are expected to increase. Consequently, it is quite appropriate for The.N'URBS Book to be part of the Monographs in Visual Communication Series. B-spline curves and surfaces have been an enduring element throughout my pro fessional life. The first edition of Mathematical Elements for Computer Graphics, published in 1972, was the first computer aided design/interactive computer graph ics textbook to contain material on B-splines. That material was obtained through the good graces of Bill Gordon and Louie Knapp while they were at Syracuse University. A paper of mine, presented during the Summer of 1977 at a Society of Naval Architects and Marine Engineers meeting on computer aided ship surface design, was arguably the first to examine the use of B-spline curves for ship design. For many, B-splines, rational B-splines, and NURBS have been a bit mysterious.
Download or read book Modifications to the Representation of the Surface Layer Processes in the Phillips Laboratory Global Spectral Model written by and published by . This book was released on 1995 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Computer Method for Perspective Representation of Curves and Surfaces written by Bruce R. Kubert and published by . This book was released on 1969 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Object Representation in Computer Vision written by Martial Hebert and published by Springer Science & Business Media. This book was released on 1995-10-18 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book documents the scientific outcome of the International NSF-ARPA Workshop on Object Representation in Computer Vision, held in New York City in December 1994 with invited participants chosen among the recognized experts in the field. The volume presents the complete set of papers in revised full-length versions. In addition, the first paper is a report on the workshop in which the panel discussions as well as the conclusions and recommendations reached by the workshop participants are summarized. Altogether the volume provides an excellent, in-depth view of the state of the art in this active area of research and applications.
Download or read book Video Object Extraction and Representation written by I-Jong Lin and published by Springer Science & Business Media. This book was released on 2005-11-30 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: “If you have built castles in the air, your work need not be lost; that is where they should be. Now put the foundations under them. ” - Henry David Thoreau, Walden Although engineering is a study entrenched firmly in belief of pr- matism, I have always believed its impact need not be limited to pr- matism. Pragmatism is not the boundaries that define engineering, just the (sometimes unforgiving) rules by which we sight our goals. This book studies two major problems of content-based video proce- ing for a media-based technology: Video Object Plane (VOP) Extr- tion and Representation, in support of the MPEG-4 and MPEG-7 video standards, respectively. After reviewing relevant image and video p- cessing techniques, we introduce the concept of Voronoi Ordered Spaces for both VOP extraction and representation to integrate shape infor- tion into low-level optimization algorithms and to derive robust shape descriptors, respectively. We implement a video object segmentation system with a novel surface optimization scheme that integrates Voronoi Ordered Spaces with existing techniques to balance visual information against predictions of models of a priori information. With these VOPs, we have explicit forms of video objects that give users the ability to - dress and manipulate video content. We outline a general methodology of robust data representation and comparison through the concept of complex partitioning mapped onto Directed Acyclic Graphs (DAGs).
Download or read book Current Trends in the Representation of Physical Processes in Weather and Climate Models written by David A. Randall and published by Springer. This book was released on 2019-01-31 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the development of physical parameterization over the last 2 to 3 decades and provides a roadmap for its future development. It covers important physical processes: convection, clouds, radiation, land-surface, and the orographic effect. The improvement of numerical models for predicting weather and climate at a variety of places and times has progressed globally. However, there are still several challenging areas, which need to be addressed with a better understanding of physical processes based on observations, and to subsequently be taken into account by means of improved parameterization. And this is all the more important since models are increasingly being used at higher horizontal and vertical resolutions. Encouraging debate on the cloud-resolving approach or the hybrid approach with parameterized convection and grid-scale cloud microphysics and its impact on models’ intrinsic predictability, the book offers a motivating reference guide for all researchers whose work involves physical parameterization problems and numerical models.
Download or read book Fourier Descriptors and Their Applications in Biology written by Pete E. Lestrel and published by Cambridge University Press. This book was released on 1997-05-13 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the theory and the practice of using Fourier descriptors as a method for measuring the shape of whole, or parts of organisms.
Download or read book Dynamic Meteorology and Hydrography Statics by V Bjerknes and J W Sandstr m written by Vilhelm Bjerknes and published by . This book was released on 1910 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamic Meteorology and Hydrography written by Vilhelm Bjerknes and published by . This book was released on 1910 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Finite Representation of Real Parametric Curves and Surfaces written by Purdue University. Department of Computer Sciences and published by . This book was released on 1992 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Representation of Meaning in Memory PLE Memory written by Walter Kintsch and published by Psychology Press. This book was released on 2014-05-23 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originally published in 1974, this volume presents empirical and theoretical investigations of the role of meaning in psychological processes. A theory is proposed for the representation of the meaning of texts, employing ordered lists of propositions. The author explores the adequacy of this representation, with respect to the demands made upon such formulations by logicians and linguists. A sufficiently large number of problems are encompassed by the propositional theory to justify its use in psychological research into memory and language comprehension. A number of different experiments are reported on a wide variety of topics, and these test central portions of this theory, and any that purports to deal with how humans represent meaning. Among the topics discussed are the role of lexical decomposition in comprehension and memory, propositions as the units of recall, and the effects of the number of propositions in a text base upon reading rate and recall. New problems are explored, such as inferential processes during reading, differences in levels of memory for text, and retrieval speed for textual information. On the other hand, a study of retrieval from semantic memory focusses on a problem of much current research. The final review chapter relates the present work to other current research in the area at the time.
