Download or read book Studying the Fischer Tropsch Synthesis on Alumina Support Cobalt Base Catalyst in Fixed Bed Reactor written by Adnan Khalil Oues and published by . This book was released on 2013 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Fischer-Tropsch catalyst composed of cobalt supported on alumina was prepared. This catalyst was cobalt/alumina (Co/AL2 O3 ). The physical characterization of the catalyst was conducted using surface area analysis through the BET method, and particle size analysis. Fischer-Tropsch experiments were conducted in a fixed bed reactor. A flow rate of 100sml/min was selected based experimentally. Two temperatures were 330, and 350°C, and three different pressures as follows 145, 217.6, and 290 psig. The results were evaluated and studied based on conversion of hydrogen and carbon monoxide, in addition to selectivity of products.
Download or read book Fischer Tropsch Technology written by André Steynberg and published by Elsevier. This book was released on 2004-10-30 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fischer-Tropsch Technology is a unique book for its state-of-the-art approach to Fischer Tropsch (FT) technology. This book provides an explanation of the basic principles and terminology that are required to understand the application of FT technology. It also contains comprehensive references to patents and previous publications. As the first publication to focus on theory and application, it is a contemporary reference source for students studying chemistry and chemical engineering. Researchers and engineers active in the development of FT technology will also find this book an invaluable source of information. * Is the first publication to cover the theory and application for modern Fischer Tropsch technology * Contains comprehensive knowledge on all aspects relevant to the application of Fischer Tropsch technology* No other publication looks at past, present and future applications
Download or read book Utilization of Cobalt Catalyst for High Temperature Fischer Tropsch Synthesis in a Fluidized Bed Reactor written by James C. Mabry and published by . This book was released on 2014 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: The research determined that the improved heat transfer characteristics of a fluidized bed reactor (FBR) will allow the use of cobalt catalyst for high temperature Fischer-Tropsch synthesis (HTFT). Cobalt was loaded onto a gamma alumina support, the catalyst was characterized using TPR, BET/BJH, XRD, and PSA to track changes in the catalyst morphology. The reactor was characterized to determine the minimum fluidization velocity and the maximum velocity prior to entering lean phase fluidization with pneumatic transport of the catalyst. The highest minimum fluidization velocity was found to be about 2800 sccm, there was no maximum velocity found for the reactor setup. Once characterized, the reactor was operated at pressures of 145, 217.6, and 290.1 psig, a syngas flow rate of 4000 sccm, and at temperatures of 330 and 350°C. The optimal conditions found in this study were 330°C and 217 psig. At these conditions CO conversion was 83.53% for a single pass. Methane, CO 2 , and light gases (C2-C4) selectivities were at low rates of 31.43, 5.80, and 3.48 % respectively. Alcohol selectivity at these conditions was non-existent. The olefin and wax selectivities were the lowest of the data set at 7.05 and 3.18% respectively. Liquid transportation fuels selectivity was the highest at 56.11%.
Download or read book Fischer Tropsch Synthesis Catalysts and Catalysis written by Burtron H. Davis and published by CRC Press. This book was released on 2016-04-06 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on a symposium held during the 248th American Chemical Society meeting that focused on use of the Fischer-Tropsch process in producing synthetic fuels. Its contents reflect the four dominant subjects of the meeting: catalyst preparation and activation, catalyst activity and reaction mechanisms, catalyst characterization and related reactions, and topics concerning commercializing the Fischer-Tropsch process. It covers recent developments related to renewable resources and green energy and provides a glimpse of the commercial potential of the Fischer-Tropsch process in synthetic fuel production.
Download or read book Technology Development for Iron and Cobalt Fischer Tropsch Catalysts written by and published by . This book was released on 1999 with total page 83 pages. Available in PDF, EPUB and Kindle. Book excerpt: The impact of deuterium on the Fischer-Tropsch (FT) synthesis was studied with a precipitated iron catalyst in the slurry phase. Deuterium has been used by several research groups to better understand the mechanism of CO hydrogenation. Inverse (k{sub H}/k{sub D} 1), normal (k{sub H}/k{sub D} 1) and no isotope effect (k{sub H}/k{sub D} = 1) have been reported. The conflicting results are thought to arise because rate of reaction is a combination of kinetic and equilibrium factors. In summary, the presence of boron produced only minor changes on the properties of the cobalt catalyst. In earlier studies, it was shown that the presence of boron made the catalyst less susceptible to poisoning by sulfur. Steady-state supercritical Fischer-Tropsch synthesis was studied in the work using a fixed-bed reactor and an unpromoted Co/SiO2 catalyst. This serves as the baseline for promoted catalyst studies. A pentane-hexane mixture was used as the supercritical solvent. Overall reactor pressure, syngas partial pressure and contact time were kept constant to obtain a valid comparison of the impact of solvent density in the catalytic activity and selectivity. Three different partial pressures of the mixture were chosen based on the density-pressure curve in order to investigate the pressure tuning effect to Fischer-Tropsch synthesis near critical region.
Download or read book Natural Gas Conversion V written by A. Parmaliana and published by Elsevier. This book was released on 1998-09-17 with total page 1005 pages. Available in PDF, EPUB and Kindle. Book excerpt: On January 1988, the ascertained and economically accessible reserves of Natural Gas (NG) amounted to over 144,000 billion cubic meters worldwide, corresponding to 124 billion tons of oil equivalents (comparable with the liquid oil reserves, which are estimated to be 138 billion TOE). It is hypothesized that the volume of NG reserve will continue to grow at the same rate of the last decade. Forecasts on production indicate a potential increase from about 2,000 billion cubic meters in 1990 to not more than 3,300 billion cubic meters in 2010, even in a high economic development scenario. NG consumption represents only one half of oil: 1.9 billion TOE/y as compared to 3.5 of oil. Consequently, in the future gas will exceed oil as a carbon atom source. In the future the potential for getting energetic vectors or petrochemicals from NG will continue to grow. The topics covered in Natural Gas Conversion V reflect the large global R&D effort to look for new and economic ways of NG exploitation. These range from the direct conversion of methane and light paraffins to the indirect conversion through synthesis gas to fuels and chemicals. Particularly underlined and visible are the technologies already commercially viable. These proceedings prove that mature and technologically feasible processes for natural gas conversion are already available and that new and improved catalytic approaches are currently developing, the validity and feasibility of which will soon be documented. This is an exciting area of modern catalysis, which will certainly open novel and rewarding perspectives for the chemical, energy and petrochemical industries.
Download or read book Iron and Cobalt Catalysts written by Wilson D. Shafer and published by MDPI. This book was released on 2020-06-23 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the turn of the last century when the field of catalysis was born, iron and cobalt have been key players in numerous catalysis processes. These metals, due to their ability to activate CO and CH, haev a major economic impact worldwide. Several industrial processes and synthetic routes use these metals: biomass-to-liquids (BTL), coal-to-liquids (CTL), natural gas-to-liquids (GTL), water-gas-shift, alcohol synthesis, alcohol steam reforming, polymerization processes, cross-coupling reactions, and photocatalyst activated reactions. A vast number of materials are produced from these processes, including oil, lubricants, waxes, diesel and jet fuels, hydrogen (e.g., fuel cell applications), gasoline, rubbers, plastics, alcohols, pharmaceuticals, agrochemicals, feed-stock chemicals, and other alternative materials. However, given the true complexities of the variables involved in these processes, many key mechanistic issues are still not fully defined or understood. This Special Issue of Catalysis will be a collaborative effort to combine current catalysis research on these metals from experimental and theoretical perspectives on both heterogeneous and homogeneous catalysts. We welcome contributions from the catalysis community on catalyst characterization, kinetics, reaction mechanism, reactor development, theoretical modeling, and surface science.
Download or read book Bench scale Studies of the Fischer Tropsch Synthesis Over Iron Nickel and Nickel Cobalt Catalysts Japan written by Shiro Watanabe and published by . This book was released on 1951 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Kinetic Study of the Modified Fischer Tropsch Synthesis Over an Alumina supported Cobalt Oxide Catalyst written by Danny Chien Lu and published by . This book was released on 1985 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Catalysis in the Refining of Fischer Tropsch Syncrude written by Arno de Klerk and published by Royal Society of Chemistry. This book was released on 2010 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book to provide a review of the literature on the catalysis needed to refine syncrude to transportation fuels.
Download or read book Fischer Tropsch Synthesis Over a Cobalt Catalyst in a Slurry bed Reactor written by Richard Christopher Boland and published by . This book was released on 1980 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific Bases for the Preparation of Heterogeneous Catalysts written by E. Gaigneaux and published by Elsevier. This book was released on 2002-08-29 with total page 1150 pages. Available in PDF, EPUB and Kindle. Book excerpt: It has become a tradition that every four years, the Université Catholique de Louvain and the Katholieke Universiteit Leuven jointly organize a symposium devoted to the scientific bases for the preparation of heterogeneous catalysts. These meetings bring together researchers from academia and industry and offer a forum for discussions on the chemistry involved in the preparation of industrial heterogeneous catalysts. This volume containing the Proceedings of the 8th International Symposium on Scientific Bases for the Preparation of Heterogeneous Catalysts consists of papers summarizing most of the 139 oral communications and posters selected by the international scientific committee, composed of 27 experts in the field of catalyst preparation, holding an industrial or academia appointment. The contributions focus on the aspects of catalyst preparation. The main topics are: new approaches in catalyst preparation; advanced preparations of nanoporous and mesoporous catalysts; catalysts preparation for special performances and purposes; catalysts for environmental purposes; and molecular catalysis. Emphasis is put on the role that catalysis can play as an essential element of sustainable development.
Download or read book Fischer Tropsch Synthesis written by Robert James Colmyer and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: ABSTRACT: The Fischer-Trospch (F-T) synthesis of liquid hydrocarbon fuels from biomass-derived synthesis gas (CO + H2) is a promising way of producing renewable ultra-clean diesel fuel. The Fischer Tropsch process has been used commercially for many decades using coal or natural gas as a feedstock. Recently the focus has switched to renewable resources, such as biomass. Significant effort has been spent developing efficient Fischer-Tropsch catalysts, but very little is known about the effects of nanoparticle oxide supports for Fischer-Tropsch catalysts. In this research project the objectives were to 1) design and build a F-T reactor and 2) use the system to develop new efficient F-T catalysts. A number of different catalysts were prepared, carefully characterized and tested for F-T activity. The initial study involved the effects of support pretreatment and catalyst precursor quality. In addition, ZrO2-promotion was investigated in detail for Co catalysts supported on nanoparticle (n-SiO2) and porous (p-SiO2) silica supports. The results show that the support pretreatment and catalyst precursor have limited effects on the catalytic activities and selectivities. It was also found that ZrO2 addition increases activity and in some cases selectivity with minimal difference between Co/n-SiO2 and Co/p-SiO2.
Download or read book Fischer Tropsch Cobalt Catalyst Improvements with the Presence of TiO2 La2O3 and ZrO2 on an Alumina Support written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-05-22 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this study was to evaluate the effect of titanium oxide, lanthanum oxide, and zirconium oxide on alumina supported cobalt catalysts. The hypothesis was that the presence of lanthanum oxide, titanium oxide, and zirconium oxide would reduce the interaction between cobalt and the alumina support. This was of interest because an optimized weakened interaction could lead to the most advantageous cobalt dispersion, particle size, and reducibility. The presence of these oxides on the support were investigated using a wide range of characterization techniques such as SEM, nitrogen adsorption, x-ray diffraction (XRD), temperature programmed reduction (TPR), temperature programmed reduction after reduction (TPR-AR), and hydrogen chemisorptions/pulse reoxidation. Results indicated that both La2O3 and TiO2 doped supports facilitated the reduction of cobalt oxide species in reference to pure alumina supported cobalt catalysts, however further investigation is needed to determine the effect of ZrO2 on the reduction profile. Results showed an increased corrected cluster size for all three doped supported catalysts in comparison to their reference catalysts. The increase in reduction and an increase in the cluster size led to the conclusion that the support-metal interaction weakened by the addition of TiO2 and La2O3. It is also likely that the interaction decreased upon presence of ZrO2 on the alumina, but further research is necessary. Preliminary results have indicated that the alumina-supported catalysts with titanium oxide and lanthanum oxide present are of interest because of the weakened cobalt support interaction. These catalysts showed an increased extent of reduction, therefore more metallic cobalt is present on the support. However, whether or not there is more cobalt available to participate in the Fischer-Tropsch synthesis reaction (cobalt surface atoms) depends also on the cluster size. On one hand, increasing cluster size alone tends to decrease the
Download or read book Catalysis written by James J Spivey and published by Royal Society of Chemistry. This book was released on 2013-03-11 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over 7000 papers are published in the field of catalysis each year. While the majority appear within a handful publications, keeping up with the literature can be difficult. Now in its 25th volume, the Specialist Periodical Report on Catalysis presents critical and comprehensive reviews of the hottest literature published over the last twelve months. Industrial and academic scientists face increasing challenges to find cost-effective and environmentally sound methods for converting natural resources into fuels, chemicals and energy. This series is edited by two leading researchers in the field and provides a balanced and in-depth review of the modern approaches to these challenges, covering major areas of heterogeneous and homogenous catalysis, as well as specific applications of catalysis, such as NOx control, kinetics and experimental techniques, such as microcalorimetry. With chapters detailing specific areas within the field, this series is a comprehensive reference for anyone working in Catalysis and an essential resource for any Chemistry Library.
Download or read book Greener Fischer Tropsch Processes written by Peter M. Maitlis and published by John Wiley & Sons. This book was released on 2013-01-30 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Greener Fischer-Tropsch Processes How can we use our carbon-based resources in the most responsible manner? How can we most efficiently transform natural gas, coal, or biomass into diesel, jet fuel or gasoline to drive our machines? The Big Questions today are energy-related, and the Fischer-Tropsch process provides industrially tested solutions. This book offers a comprehensive and up-to-date overview of the Fischer-Tropsch process, from the basic science and engineering to commercial issues. It covers industrial, economic, environmental, and fundamental aspects, with a specific focus on “green” concepts such as sustainability, process improvement, waste-reduction, and environmental care. The result is a practical reference for researchers, engineers, and financial analysts working in the energy sector, who are interested in carbon conversion, fuel processing or synthetic fuel technologies. It is also an ideal introductory book on the Fischer-Tropsch process for graduate courses in chemistry and chemical engineering.
