Download or read book Structural and Stress Analysis written by T.H.G. Megson and published by Elsevier. This book was released on 2005-02-17 with total page 739 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural analysis is the corner stone of civil engineering and all students must obtain a thorough understanding of the techniques available to analyse and predict stress in any structure. The new edition of this popular textbook provides the student with a comprehensive introduction to all types of structural and stress analysis, starting from an explanation of the basic principles of statics, normal and shear force and bending moments and torsion. Building on the success of the first edition, new material on structural dynamics and finite element method has been included.Virtually no prior knowledge of structures is assumed and students requiring an accessible and comprehensive insight into stress analysis will find no better book available. - Provides a comprehensive overview of the subject providing an invaluable resource to undergraduate civil engineers and others new to the subject - Includes numerous worked examples and problems to aide in the learning process and develop knowledge and skills - Ideal for classroom and training course usage providing relevant pedagogy

Download or read book Design of Concrete Structures with Stress Fields written by Aurello Muttoni and published by Birkhäuser. This book was released on 2012-12-06 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: 17 2 STRESS FIELDS FOR SIMPLE STRUCTURES 2. 1 INTRODUCTION In this chapter the behavior and strength of simple structures made of rein forced or prestressed concrete is investigated with the aid of stress fields. In particular, the webs and flanges of beams, simple walls, brackets, bracing beams and joints of frames are investigated. By this means, the majority of design cases are already covered. In reality, all structural components are three-dimensional. Here, however, components are considered either directly as two-dimensional plate elements (i. e. the plane stress condition with no variation of stress over the thickness of the element) or they are subdivided into several plates. Since two-dimensional structural elements are statically redundant, it is pOSSible for a particular loading to be in equilibrium with many (theoretically an infinite number of) stress states. If the lower bound method of the theory of plasticity is employed, then an admissible stress field or any combination of such stress fields may be selected. In chapter 4 it is shown that this method is suitable for the design of reinforced concrete structures, and the consequence of the choice of the final structural system on the structural behavior is dealt with in detail. The first cases of the use of this method date back to Ritter [6] and Morsch [4], who already at the beginning of the century investigated the resultants of the internal stresses by means of truss models.

Download or read book Statics and Mechanics of Structures written by Steen Krenk and published by Springer Science & Business Media. This book was released on 2013-03-02 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: The statics and mechanics of structures form a core aspect of civil engineering. This book provides an introduction to the subject, starting from classic hand-calculation types of analysis and gradually advancing to a systematic form suitable for computer implementation. It starts with statically determinate structures in the form of trusses, beams and frames. Instability is discussed in the form of the column problem - both the ideal column and the imperfect column used in actual column design. The theory of statically indeterminate structures is then introduced, and the force and deformation methods are explained and illustrated. An important aspect of the book’s approach is the systematic development of the theory in a form suitable for computer implementation using finite elements. This development is supported by two small computer programs, MiniTruss and MiniFrame, which permit static analysis of trusses and frames, as well as linearized stability analysis. The book’s final section presents related strength of materials subjects in greater detail; these include stress and strain, failure criteria, and normal and shear stresses in general beam flexure and in beam torsion. The book is well-suited as a textbook for a two-semester introductory course on structures.

Download or read book Working Stresses for Structural Design written by United States. Army. Corps of Engineers and published by . This book was released on 1958 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Elastic Stresses in Structures written by Alberto Castigliano and published by . This book was released on 1919 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Concrete Structures written by A. Ghali and published by CRC Press. This book was released on 2006-01-16 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete structures must be designed not only to be safe against failure but also to perform satisfactorily in use. This book is written for practising engineers and students, and focuses on design methods for checking deflections and cracking which can affect the serviceability of reinforced and prestressed concrete structures. The authors present accurate and easy-to-apply methods of analysing immediate and long-term stresses and deformations. These methods allow designers to account for variations of concrete properties from project to project and from country to country, making the book universally applicable. Comprehensively updated, this third edition of Concrete Structures also includes four new chapters covering such topics as: non-linear analysis of plane frames, design for serviceability of prestressed concrete, serviceability of members reinforced with fibre polymer bars, and the analysis of time-dependent internal forces with linear computer programs that are routinely used by structural designers. A website accompanies the book, featuring three design calculation programs related to stresses in cracked sections, creep coefficients and time-dependent analysis. The book contains numerous examples, some of which are worked out in the SI units and others in the Imperial units. The input data and the main results are given in both SI and Imperial units. The book is not tied to any specific code, although the latest American and European codes of practice are covered in the appendices.

Download or read book Analysis of Welded Structures written by Koichi Masubuchi and published by Elsevier. This book was released on 2013-10-22 with total page 655 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis of Welded Structures: Residual Stresses, Distortion, and their Consequences encompasses several topics related to design and fabrication of welded structures, particularly residual stresses and distortion, as well as their consequences. This book first introduces the subject by presenting the advantages and disadvantages of welded structures, as well as the historical overview of the topic and predicted trends. Then, this text considers residual stresses, heat flow, distortion, fracture toughness, and brittle and fatigue fractures of weldments. This selection concludes by discussing the effects of distortion and residual stresses on buckling strength of welded structures and effects of weld defects on service behavior. This book also provides supplementary discussions on some related and selected subjects. This text will be invaluable to metallurgists, welders, and students of metallurgy and welding.

Download or read book Concrete Structures Stresses and Deformations written by Amin Ghali and published by CRC Press. This book was released on 1994-10-13 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete structures must be designed both to be safe against failure and to perform satisfactorily in use. This book is written for practising engineers, students and designers and concentrates on design methods for checking the main serviceability requirements of control of deflections and cracking in reinforced and prestressed concrete structures.

Download or read book Thermal Stresses and Temperature Control of Mass Concrete written by Zhu Bofang and published by Butterworth-Heinemann. This book was released on 2013-12-11 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methods of controlling mass concrete temperatures range from relatively simple to complex and from inexpensive too costly. Depending on a particular situation, it may be advantageous to use one or more methods over others. Based on the author's 50 years of personal experience in designing mass concrete structures, Thermal Stresses and Temperature Control of Mass Concrete provides a clear and rigorous guide to selecting the right techniques to meet project-specific and financial needs. New techniques such as long time superficial thermal insulation, comprehensive temperature control, and MgO self-expansive concrete are introduced. - Methods for calculating the temperature field and thermal stresses in dams, docks, tunnels, and concrete blocks and beams on elastic foundations - Thermal stress computations that take into account the influences of all factors and simulate the process of construction - Analytical methods for determining thermal and mechanical properties of concrete - Formulas for determining water temperature in reservoirs and temperature loading of arched dams - New numerical monitoring methods for mass and semi-mature aged concrete

Download or read book Torsion and Shear Stresses in Ships written by Mohamed Shama and published by Springer Science & Business Media. This book was released on 2010-09-27 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last few decades, much research work was conducted to improve ship structure analysis and design. Most of the efforts were directed to improve the strength of hull girder and to use the method of finite element analysis more efficiently and effectively. Because of the high degree of complexity of ship structures the interaction between hull girder strength and local strength require special attention. The complex system of stresses could produce unacceptable deformations and high values of equivalent stresses. This book covers an area of ship structure analysis and design that has not been exhaustively covered by other books on ship structures in a simple form. It presents the basic concepts of the methods and procedures required to calculate torsion and shear stresses in ship structures. Moreover, it is enhanced with a set of some solved and unsolved problems, very useful for students of naval and marine engineering.

Download or read book Design for Thermal Stresses written by Randall F. Barron and published by John Wiley & Sons. This book was released on 2011-09-07 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: The tools engineers need for effective thermal stress design Thermal stress concerns arise in many engineering situations, from aerospace structures to nuclear fuel rods to concrete highway slabs on a hot summer day. Having the tools to understand and alleviate these potential stresses is key for engineers in effectively executing a wide range of modern design tasks. Design for Thermal Stresses provides an accessible and balanced resource geared towards real-world applications. Presenting both the analysis and synthesis needed for accurate design, the book emphasizes key principles, techniques, and approaches for solving thermal stress problems. Moving from basic to advanced topics, chapters cover: Bars, beams, and trusses from a "strength of materials" perspective Plates, shells, and thick-walled vessels from a "theory of elasticity" perspective Thermal buckling in columns, beams, plates, and shells Written for students and working engineers, this book features numerous sample problems demonstrating concepts at work. In addition, appendices include important SI units, relevant material properties, and mathematical functions such as Bessel and Kelvin functions, as well as characteristics of matrices and determinants required for designing plates and shells. Suitable as either a working reference or an upper-level academic text, Design for Thermal Stresses gives students and professional engineers the information they need to meet today's thermal stress design challenges.

Download or read book Stressed Composite Structures written by A.G. Kolpakov and published by Springer Science & Business Media. This book was released on 2012-11-08 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: The mechanics of structures with initial stresses is a traditional part of structural mechanics. It is closely related to the important problem of stability of structures. The basic concepts of elastic stability of structures go back to works by Euler (1759) and Bryan (1889). Later, it was found that the problem of deformation of solids with initial stresses is related to variational principles and nonlinear problems in elasticity; see Trefftz (1933), Marguerre (1938), Prager (1947), Hill (1958), Washuzu (1982). Historical detail up to the 1940s can be found in the book by Timoshenko (1953). Observing the basic concepts of the traditional mechanics of stressed structures, we agree that these are suitable for uniform structural elements (plates, beams, and so on) made of homogeneous materials, but not for complex structures (such as a network plate or a lattice mast) or structures made of composite materials (such as fiber reinforced or textile materials). Many concepts of the classical theory, such as a cross section or neutral plane (axis), correspond to no mechanical objects if we consider an inhomogeneous structure. As a result, we come to the conclusion that it would be useful to have a theory of thin inhomogeneous structures developed on the basis of 3-D elasticity theory with no simplifying assumptions (with no a priori hypothesis).

Download or read book Practical Finite Element Analysis written by Nitin S. Gokhale and published by FINITE TO INFINITE. This book was released on 2008 with total page 27 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highlights of the book: Discussion about all the fields of Computer Aided Engineering, Finite Element Analysis Sharing of worldwide experience by more than 10 working professionals Emphasis on Practical usuage and minimum mathematics Simple language, more than 1000 colour images International quality printing on specially imported paper Why this book has been written ... FEA is gaining popularity day by day & is a sought after dream career for mechanical engineers. Enthusiastic engineers and managers who want to refresh or update the knowledge on FEA are encountered with volume of published books. Often professionals realize that they are not in touch with theoretical concepts as being pre-requisite and find it too mathematical and Hi-Fi. Many a times these books just end up being decoration in their book shelves ... All the authors of this book are from IIT€™s & IISc and after joining the industry realized gap between university education and the practical FEA. Over the years they learned it via interaction with experts from international community, sharing experience with each other and hard route of trial & error method. The basic aim of this book is to share the knowledge & practices used in the industry with experienced and in particular beginners so as to reduce the learning curve & avoid reinvention of the cycle. Emphasis is on simple language, practical usage, minimum mathematics & no pre-requisites. All basic concepts of engineering are included as & where it is required. It is hoped that this book would be helpful to beginners, experienced users, managers, group leaders and as additional reading material for university courses.

Download or read book Concrete Structures written by A. Ghali and published by CRC Press. This book was released on 2011-09-20 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text presents the most effective analysis for predicting the true stresses and deflections of concrete structures, accounting for creep and shrinkage of concrete and relaxation of prestressed reinforcement. Sustainability has become a major requirement in modern structures, which need to sustain satisfactory service over a longer life. It is not rare to specify a life span of 100 years for infrastructure such as bridges. This complete and wide-ranging study of stresses and deformations of reinforced and prestressed concrete structures focuses on design methods for avoiding the deflections and cracking that diminish serviceability. This fourth edition has a new emphasis on designing for serviceability. It has been comprehensively updated. It now includes 65 solved examples and more than 45 instructive problems with answers given at the end of the book. An accompanying website contains design calculation programs, which allow interactive data input. Independent of codes of practice, the book is universally applicable, and is especially suitable for practising engineers and graduate students.

Download or read book Experimental Stress Analysis for Materials and Structures written by Alessandro Freddi and published by Springer. This book was released on 2015-03-19 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes the main methods of experimental stress analysis and examines their application to various states of stress of major technical interest, highlighting aspects not always covered in the classic literature. It is explained how experimental stress analysis assists in the verification and completion of analytical and numerical models, the development of phenomenological theories, the measurement and control of system parameters under operating conditions, and identification of causes of failure or malfunction. Cases addressed include measurement of the state of stress in models, measurement of actual loads on structures, verification of stress states in circumstances of complex numerical modeling, assessment of stress-related material damage, and reliability analysis of artifacts (e.g. prostheses) that interact with biological systems. The book will serve graduate students and professionals as a valuable tool for finding solutions when analytical solutions do not exist.

Download or read book Kinetic Theory of Engineering Structures Dealing with Stresses Deformations and Work for the Use of Students and Practitioners in Civil Engineering written by David Albert Molitor and published by . This book was released on 1910 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Roark s Formulas for Stress and Strain written by Warren Clarence Young and published by McGraw-Hill Europe. This book was released on 2002 with total page 852 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ultimate resource for designers, engineers, and analyst working with calculations of loads and stress.