Download or read book Steel Design 1 Structural Basics written by H. H. Snijder and published by John Wiley & Sons. This book was released on 2020-07-21 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook covers the design and analysis of steel structures for buildings according to EN 1990 (Eurocode 0), EN 1991 (Eurocode 1) and EN 1993 (Eurocode 3). Chapter 1 describes the theory and background of EN 1990 in terms of structural safety, reliability and the design values of resistances and actions. Chapter 2 deals with actions and deformations described in EN 1991. The permanent loads and vari¬able actions and in particular the imposed loads and the snow loads and wind actions are discussed. This chapter also contains three worked examples to determine the actions on a floor in a residential house, the actions on a free-standing platform canopy at a station and the wind actions on the façades of an office building. Chapter 3 is about modelling, discussing the schematisation of the structural system, the joints and the material properties as well as the cross-section properties. Chapter 4 deals with the classification of frames and the various analysis methods for unbraced and braced frames. Chapter 5 then goes deeper into these analysis methods to determine the force distribution and defor¬mations. Chapter 6 deals with the assessment by code-checking of (parts of) the steel structure with EN 1993-1-1 and EN 1993-1-8. At a basic level, the assessment of the resistance of cross-sections, the stability of members under axial forces and the resistance of bolted and welded connections are explained. Chapter 7 discusses in an extensive way the assessment by code-checking of the resistance of cross-sections, both for single and combined internal forces. The principles of the assessment of the resistance of cross-sections according to elastic and plastic theory are also discussed.
Download or read book Design of Steel Structures written by Elias G. Abu-Saba and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended for classroom teaching in architectural and civil engineering at the graduate and undergraduate levels. Although it has been developed from lecture notes given in structural steel design, it can be useful to practicing engineers. Many of the examples presented in this book are drawn from the field of design of structures. Design of Steel Structures can be used for one or two semesters of three hours each on the undergraduate level. For a two-semester curriculum, Chapters 1 through 8 can be used during the first semester. Heavy emphasis should be placed on Chapters 1 through 5, giving the student a brief exposure to the consideration of wind and earthquakes in the design of buildings. With the new federal requirements vis a vis wind and earthquake hazards, it is beneficial to the student to have some under standing of the underlying concepts in this field. In addition to the class lectures, the instructor should require the student to submit a term project that includes the complete structural design of a multi-story building using standard design procedures as specified by AISC Specifications. Thus, the use of the AISC Steel Construction Manual is a must in teaching this course. In the second semester, Chapters 9 through 13 should be covered. At the undergraduate level, Chapters 11 through 13 should be used on a limited basis, leaving the student more time to concentrate on composite construction and built-up girders.
Download or read book Unified Design of Steel Structures written by Louis F. Geschwindner and published by John Wiley & Sons. This book was released on 2011-12-20 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geschwindner's 2nd edition of Unified Design of Steel Structures provides an understanding that structural analysis and design are two integrated processes as well as the necessary skills and knowledge in investigating, designing, and detailing steel structures utilizing the latest design methods according to the AISC Code.The goal is to prepare readers to work in design offices as designers and in the field as inspectors. This new edition is compatible with the 2011 AISC code as well as marginal references to the AISC manual for design examples and illustrations, which was seen as a real advantage by the survey respondents. Furthermore, new sections have been added on: Direct Analysis, Torsional and flexural-torsional buckling of columns, Filled HSS columns, and Composite column interaction. More real-world examples are included in addition to new use of three-dimensional illustrations in the book and in the image gallery; an increased number of homework problems; and media approach Solutions Manual, Image Gallery.
Download or read book Design of Steel Structures written by Luís Simões da Silva and published by John Wiley & Sons. This book was released on 2012-01-09 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the fundamental design concept of Eurocode 3 for current steel structures in building construction, and their practical application. Following a discussion of the basis of design, including the principles of reliability management and the limit state approach, the material standards and their use are detailed. The fundamentals of structural analysis and modeling are presented, followed by the design criteria and approaches for various types of structural members. The theoretical basis and checking procedures are closely tied to the Eurocode requirements. The following chapters expand on the principles and applications of elastic and plastic design, each exemplified by the step-by-step design calculation of a braced steel-framed building and an industrial building, respectively. Besides providing the necessary theoretical concepts for a good understanding, this manual intends to be a supporting tool for the use of practicing engineers. In order of this purpose, throughout the book, numerous worked examples are provided, concerning the analysis of steel structures and the design of elements under several types of actions. These examples will facilitate the acceptance of the code and provide for a smooth transition from earlier national codes to the Eurocode.
Download or read book Architecturally Exposed Structural Steel written by Terri Meyer Boake and published by Birkhäuser. This book was released on 2015-02-17 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the means for a better control and purposeful consideration of the design of Architecturally Exposed Structural Steel (AESS). It deploys a detailed categorization of AESS and its uses according to design context, building typology and visual exposure. In a rare combination, this approach makes high quality benchmarks compatible with economies in terms of material use, fabrication methods, workforce and cost. Building with exposed steel has become more and more popular worldwide, also as advances in fire safety technology have permitted its use for building tasks under stringent fire regulations. On her background of long standing as a teacher in architectural steel design affiliated with many institutions, the author ranks among the world‘s best scholars on this topic. Among the fields covered by the extensive approach of this book are the characteristics of the various categories of AESS, the interrelatedness of design, fabrication and erection of the steel structures, issues of coating and protection (including corrosion and fire protection), special materials like weathering steel and stainless steel, the member choices and a connection design checklist. The description draws on many international examples from advanced contemporary architecture, all visited and photographed by the author, among which figure buildings like the Amgen Helix Bridge in Seattle, the Shard Observation Level in London, the New York Times Building and the Arganquela Footbridge.
Download or read book Structural Steel Design written by Jack C. McCormac and published by Prentice Hall. This book was released on 1995 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: the undergraduate course in structural steel design using the Load and Resistance Factor Design Method (LRFD). The text also enables practicing engineers who have been trained to use the Allowable Stress Design procedure (ASD) to change easily to this more economical and realistic method for proportioning steel structures. The book comes with problem-solving software tied to chapter exercises which allows student to specify parameters for particular problems and have the computer assist them. On-screen information about how to use the software and the significance of various problem parameters is featured. The second edition reflects the revised steel specifications (LRFD) of the American Institute of Steel Construction.
Download or read book Steel Structures written by Rolf Kindmann and published by John Wiley & Sons. This book was released on 2012-03-07 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the design of steel structures using finite element methods (FEM) according to the current state of the art in Germany and the rest of Europe. After a short introduction on the basics of the design, this book illustrates the FEM with a focus on internal forces, displacements, critical loads and modal shapes. Next to finite element procedures for linear calculations considering the stress states of normal force, biaxial bending and warping torsion, non-linear calculations and the stability cases of flexural buckling, lateral torsional buckling and plate buckling are concentrated on significantly. In this context, design procedures for stability according to the standard Eurocode 3 is introduced and discussed. In addition, important fundamental issues are covered, such as the determination of cross-section properties as well as the elastic and plastic cross-section resistance. Complementary, finite element procedures for cross sections are dealt with, which will have an increasing importance in future. This book has evolved within the teaching activities of the authors in the lecture Computer-oriented Design of Steel Structures on the Master?s Program Computational Engineering at the University of Bochum. It covers the total variety of demands needed to be discussed for the safe, economic and modern design of steel structures.
Download or read book Simplified Design of Steel Structures written by James Ambrose and published by John Wiley & Sons. This book was released on 1997 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: The seventh edition of Simplified Design of Steel Structures is an excellent reference for architects and engineers who need information about the common uses of steel for the structures of buildings. The clear and concise format benefits readers who have limited backgrounds in mathematics and engineering. This new edition has been updated to reflect changes in standards, industry technology, and construction practices, including new research in the field, examples of general building structural systems, and the use of computers in structural design. Specifically, Load and Resistance Factor Design (LRFD) and Allowable Stress Design (ASD) are now covered.
Download or read book Principles of Structural Design written by Ram S. Gupta and published by CRC Press. This book was released on 2019-06-17 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: Timber, steel, and concrete are common engineering materials used in structural design. Material choice depends upon the type of structure, availability of material, and the preference of the designer. The design practices the code requirements of each material are very different. In this updated edition, the elemental designs of individual components of each material are presented, together with theory of structures essential for the design. Numerous examples of complete structural designs have been included. A comprehensive database comprising materials properties, section properties, specifications, and design aids, has been included to make this essential reading.
Download or read book Structural Steel Design written by Alan Williams and published by Kaplan AEC Engineering. This book was released on 2004 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design Of Steel Structures written by L S Jayagopal and published by Vikas Publishing House. This book was released on with total page 475 pages. Available in PDF, EPUB and Kindle. Book excerpt: First course for the learners of steel structural design at UG level, this book is based on limit state design as per the Indian Code of Practice General construction in steel IS 800-2007. It explains theoretical concepts which form the basis of codal provisions. Emphasis lies on principal axes based compression members, peripheral load distribution for base plates, limit state design of base plate bearing column with moment, unsymmetrically loaded beam design, tension field web design in plate girders, section and member design for bi-axially loaded beam columns which are unique to the book. Practical insight provided in chapters of applied design.
Download or read book Guide to Stability Design Criteria for Metal Structures written by Ronald D. Ziemian and published by John Wiley & Sons. This book was released on 2010-02-08 with total page 1120 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive guide to stability design criteria, fully updated and incorporating current research Representing nearly fifty years of cooperation between Wiley and the Structural Stability Research Council, the Guide to Stability Design Criteria for Metal Structures is often described as an invaluable reference for practicing structural engineers and researchers. For generations of engineers and architects, the Guide has served as the definitive work on designing steel and aluminum structures for stability. Under the editorship of Ronald Ziemian and written by SSRC task group members who are leading experts in structural stability theory and research, this Sixth Edition brings this foundational work in line with current practice and research. The Sixth Edition incorporates a decade of progress in the field since the previous edition, with new features including: Updated chapters on beams, beam-columns, bracing, plates, box girders, and curved girders. Significantly revised chapters on columns, plates, composite columns and structural systems, frame stability, and arches Fully rewritten chapters on thin-walled (cold-formed) metal structural members, stability under seismic loading, and stability analysis by finite element methods State-of-the-art coverage of many topics such as shear walls, concrete filled tubes, direct strength member design method, behavior of arches, direct analysis method, structural integrity and disproportionate collapse resistance, and inelastic seismic performance and design recommendations for various moment-resistant and braced steel frames Complete with over 350 illustrations, plus references and technical memoranda, the Guide to Stability Design Criteria for Metal Structures, Sixth Edition offers detailed guidance and background on design specifications, codes, and standards worldwide.
Download or read book Unified Design of Steel Structures with Study Tips Set written by Louis F. Geschwindner and published by . This book was released on 2008-03-06 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Steel Structures Design Based on Eurocode 3 written by Farzad Hejazi and published by Springer. This book was released on 2018-04-11 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is tailored to the needs of structural engineers who are seeking to become familiar with the design of steel structures based on Eurocode 3. It explains each step of the design process using comprehensive flow charts, tables and equations as well as numerous examples. The useful appendices, including general sections and properties as well as general formulas for shear force, maximum bending moment and deflection for several selected loading conditions, offer designers a valuable source of reference. The book also introduces a specially developed design-aid program, which provides immediate results without the need for modeling, and as such considerably reduces the time needed for the design stage.
Download or read book Structural Engineer s Pocket Book 2nd Edition written by Fiona Cobb and published by Elsevier. This book was released on 2009 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Now in its second edition, the Structural Engineer's Pocket Book is a comprehensive pocket reference guide for professional and student structural engineers, particularly those taking the iStructE Part 3 Exam. The combination of tables, data, facts, formulae and rules of thumb make it a valuable aid in scheme design for structural engineers in the office, in transit or on site." "Concise and precise, this second edition is updated to reflect changes to the British Standards, which are used and referenced throughout, as well as the addition of a new section on sustainability. Other subject areas include timber, masonry, steel, concrete, aluminium and glass." --Book Jacket.
Download or read book Basic Steel Design written by Bruce Gilbert Johnston and published by Prentice Hall. This book was released on 1980 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Steel Designers Manual Fifth Edition The Steel Construction Institute written by Institute Steel Construction and published by Wiley-Blackwell. This book was released on 1993-01-18 with total page 1266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic manual for structural steelwork design was first published in 1956. Since then, it has sold many thousands of copies worldwide. The fifth edition is the first major revision for 20 years and is the first edition to be fully based on limit state design, now used as the primary design method, and on the UK code of practice, BS 5950. It provides, in a single volume, all you need to know about structural steel design.
