Download or read book Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer written by and published by . This book was released on with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer DSR written by and published by . This book was released on with total page 31 pages. Available in PDF, EPUB and Kindle. Book excerpt: This test method covers the determination of the dynamic shear modulus and phase angle of asphalt binder when tested in dynamic (oscillatory) shear using parallel plate test geometry. It is applicable to asphalt binders having dynamic shear modulus values in the range from 100 Pa to 10 MPa. This range in modulus is typically obtained between 6 and 88°C at an angular frequency of 10 rad/s. This test method is intended for determining the linear viscoelastic properties of asphalt binders as required for specification testing and is not intended as a comprehensive procedure for the full characterization of the viscoelastic properties of asphalt binder. This standard is appropriate for unaged material or material aged in accordance with T 240 and R 28.
Download or read book Proceedings of the 10th International Conference on Maintenance and Rehabilitation of Pavements written by Paulo Pereira and published by Springer Nature. This book was released on with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Rheological Additives written by George Wypych and published by Elsevier. This book was released on 2022-03-17 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Rheological Additives covers how these additives are commonly applied in a wide range of industries, providing readers with information on over 300 organic and inorganic additives. This information is presented in individual tables for each product, whether commercial or generic. Data is divided into General Information, Physical Properties, Health and Safety, Ecological Properties, Use and Performance. Sections cover their state, odor, color, bulk density, density, specific gravity, relative density, boiling point, melting point, pour point, decomposition temperature, glass transition temperature, refractive index, vapor pressure, vapor density, volume resistivity, relative permittivity, ash content, pH, viscosity, rheological behavior, and more. Other notations include updates on NFPA classification, HMIS classification, OSHA hazard class, UN Risk phrases, UN Safety phrases, UN/NA class, DOT class, ADR/RIC class, ICAO/IATA class, IMDG class, packaging group, shipping name, food approvals, autoignition temperature, self-accelerating decomposition temperature, flash point, TLV ACGIH, NIOSH and OSHA, maximum exposure concentration IDLH, animal testing oral-rat, rabbit-dermal, mouse-oral, guinea pig-dermal, rat-dermal, rat-inhalation, mouse-inhalation, ingestion and skin and eye irritation. Provides key research data on rheological additives Covers the essential theoretical knowledge necessary for proper selection and use of rheological additives Discusses the various applications of rheological additives, polymer processing methods that require rheological agents, and health, safety, and environmental considerations in their use
Download or read book Introduction to Polymer Rheology written by Montgomery T. Shaw and published by John Wiley & Sons. This book was released on 2012-01-12 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the rheology of polymers, with simple math Designed for practicing scientists and engineers interested in polymer rheology science, education, consulting, or research and development, Introduction to Polymer Rheology is a comprehensive yet accessible guide to the study of the deformation and flow of matter under applied stress. Often considered a complicated topic for beginners, the book makes grasping the fundamentals of polymer rheology easy by presenting information in an approachable way and limiting the use of complex mathematics. By doing so, this introductory overview provides readers with easy access to the key concepts underlying the flow behavior of polymer melts, solutions, and suspensions. Incorporating sample problems that are worked through and explained on the page, as well as numerous practice problems to gauge learning comprehension, the book prepares new students and practitioners for moving on to more advanced concepts. Comprising twelve chapters, the book covers stress, velocity and rate of deformation, the relationship between stress and rate of deformation (Newtonian fluid), generalized Newtonian fluids, normal stresses and elastic behavior, experimental methods, small and large strain, the molecular origins of rheological behavior, elementary polymer processing concepts, quality control in rheology, and the flow of modified polymers and those with supermolecular structure. The essential reference for accurately interpreting polymer rheology data, Introduction to Polymer Rheology provides readers with an elementary understanding of the key issues and modern approaches to resolving problems in the field. An Instructor’s Guide with answers to select problems in the text, 60 new problems with full solutions, hints for effective presentation of the material in the text, and an errata listing is available for professors using the book as a course textbook.
Download or read book Proceedings of EECE 2020 written by Nikolai Vatin and published by Springer Nature. This book was released on 2021-03-26 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the latest advances, innovations, and applications in the field of energy, environmental and construction engineering, as presented by international researchers and engineers at the International Scientific Conference Energy, Environmental and Construction Engineering, held in St. Petersburg, Russia on November 19-20, 2020. It covers highly diverse topics, including BIM; bridges, roads and tunnels; building materials; energy efficient and green buildings; structural mechanics; fluid mechanics; measuring technologies; environmental management; power consumption management; renewable energy; smart cities; and waste management. The contributions, which were selected by means of a rigorous international peer-review process, highlight numerous exciting ideas that will spur novel research directions and foster multidisciplinary collaborations.
Download or read book Proceedings of the 5th International Conference on Sustainable Civil Engineering Structures and Construction Materials written by Sheila Belayutham and published by Springer Nature. This book was released on 2022-04-06 with total page 1515 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book compiles papers presented during the 5th International Conference on Sustainable Civil Engineering Structures and Construction Materials (SCESCM) held virtually in December 2020. This is the fifth edition of this conference series; the theme for the 5th SCESCM is “Transforming the World, Foster the Sustainable Development Goals (SDGs),” and it focuses on various issues, novel findings, as well as developments in the area of civil and infrastructure, conforming to the SDGs. This book caters to postgraduate students, researchers, and practitioners involved in advocating and embedding sustainability in various phases of design, construction and maintenance of civil engineering structures and infrastructure facilities.
Download or read book Proceedings of the Fifth International Conference of Transportation Research Group of India written by Dharamveer Singh and published by Springer Nature. This book was released on 2022-05-13 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book (in three volumes) comprises the proceedings of the Fifth Conference of Transportation Research Group of India (CTRG2019) focusing on emerging opportunities and challenges in the field of transportation of people and freight. The contents of the book include characterization of conventional and innovative pavement materials, operational effects of road geometry, user impact of multimodal transport projects, spatial analysis of travel patterns, socio-economic impacts of transport projects, analysis of transportation policy and planning for safety and security, technology-enabled models of mobility services, etc. This book will be beneficial to researchers, educators, practitioners and policymakers alike.
Download or read book 8th RILEM International Symposium on Testing and Characterization of Sustainable and Innovative Bituminous Materials written by Francesco Canestrari and published by Springer. This book was released on 2015-09-24 with total page 1024 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work presents the results of RILEM TC 237-SIB (Testing and characterization of sustainable innovative bituminous materials and systems). The papers have been selected for publication after a rigorous peer review process and will be an invaluable source to outline and clarify the main directions of present and future research and standardization for bituminous materials and pavements. The following topics are covered: - Characterization of binder-aggregate interaction - Innovative testing of bituminous binders, additives and modifiers - Durability and aging of asphalt pavements - Mixture design and compaction analysis - Environmentally sustainable materials and technologies - Advances in laboratory characterization of bituminous materials - Modeling of road materials and pavement performance prediction - Field measurement and in-situ characterization - Innovative materials for reinforcement and interlayer systems - Cracking and damage characterization of asphalt pavements - Recycling and re-use in road pavements This is the proceedings of the RILEM SIB2015 Symposium (Ancona, Italy, October 7-9, 2015).
Download or read book Designing Stone Matrix Asphalt Mixtures for Rut resistant Pavements written by E. Ray Brown and published by Transportation Research Board. This book was released on 1999 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part 1: Summary of research results; Part 2: Mixture design method, construction guidelines, and quality control/quality assurance procedures
Download or read book Bearing Capacity Of Roads written by A. Gomes Correia and published by CRC Press. This book was released on 2020-12-17 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an outcome of the sixth conference on bearing capacity of roads and airfield held in Lisbon, Portugal. It covers the following topics: bearing capacity policies, concepts, costs and condition surveys; analysis and modelling; design and environmental effects; and asphalt mixtures.
Download or read book Proceedings of the RILEM International Symposium on Bituminous Materials written by Hervé Di Benedetto and published by Springer Nature. This book was released on 2021-09-25 with total page 1806 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume highlights the latest advances, innovations, and applications in bituminous materials and structures and asphalt pavement technology, as presented by leading international researchers and engineers at the RILEM International Symposium on Bituminous Materials (ISBM), held in Lyon, France on December 14-16, 2020. The symposium represents a joint effort of three RILEM Technical Committees from Cluster F: 264-RAP “Asphalt Pavement Recycling”, 272-PIM “Phase and Interphase Behaviour of Bituminous Materials”, and 278-CHA “Crack-Healing of Asphalt Pavement Materials”. It covers a diverse range of topics concerning bituminous materials (bitumen, mastics, mixtures) and road, railway and airport pavement structures, including: recycling, phase and interphase behaviour, cracking and healing, modification and innovative materials, durability and environmental aspects, testing and modelling, multi-scale properties, surface characteristics, structure performance, modelling and design, non-destructive testing, back-analysis, and Life Cycle Assessment. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster new multidisciplinary collaborations.
Download or read book Introduction to Unmanned Aircraft Systems Second Edition written by Douglas M. Marshall and published by CRC Press. This book was released on 2015-10-26 with total page 1944 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proliferation of technological capability, miniaturization, and demand for aerial intelligence is pushing unmanned aerial systems (UAS) into the realm of a multi-billion dollar industry. This book surveys the UAS landscape from history to future applications. It discusses commercial applications, integration into the national airspace system (NAS), System function, operational procedures, safety concerns, and a host of other relevant topics. The book is dynamic and well-illustrated with separate sections for terminology and web- based resources for further information.
Download or read book Proceedings of the Sixth International Conference of Transportation Research Group of India written by Lelitha Devi and published by Springer Nature. This book was released on 2022-09-18 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the proceedings of the Sixth International Conference of Transportation Research Group of India (CTRG2021) focusing on emerging opportunities and challenges in the field of transportation of people and freight. The contents of the volume include recent advancements in the pavements and materials study like Fatigue damage, Moisture damage prediction, Quantification of Aging of Polymer, and Effect of short-term aging. It also covers rapidly evolving topics like Road network analysis, Location choice analysis for Transit-Oriented Development (TOD), Transit ridership, etc. This book will be beneficial to researchers, educators, practitioners, and policymakers alike.
Download or read book Eleventh International Conference on the Bearing Capacity of Roads Railways and Airfields written by Inge Hoff and published by CRC Press. This book was released on 2022-07-07 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovations in Road, Railway and Airfield Bearing Capacity – Volume 3 comprises the third part of contributions to the 11th International Conference on Bearing Capacity of Roads, Railways and Airfields (2022). In anticipation of the event, it unveils state-of-the-art information and research on the latest policies, traffic loading measurements, in-situ measurements and condition surveys, functional testing, deflection measurement evaluation, structural performance prediction for pavements and tracks, new construction and rehabilitation design systems, frost affected areas, drainage and environmental effects, reinforcement, traditional and recycled materials, full scale testing and on case histories of road, railways and airfields. This edited work is intended for a global audience of road, railway and airfield engineers, researchers and consultants, as well as building and maintenance companies looking to further upgrade their practices in the field.
Download or read book Evaluation of a Hot Mix Asphalt Perpetual Pavement written by and published by . This book was released on 2010 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book US Infrastructure written by Aman Khan and published by Routledge. This book was released on 2019-09-17 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an in-depth look at US infrastructure and its challenges in the 21st century. While infrastructure has received considerable attention in recent years, much of the discussion has concentrated on physical, economic, or noneconomic conditions. The Trump administration has heightened interest in the topic, promising infrastructure spending during his tenure, yet little demonstrable progress has been made. This book brings together a multi-disciplinary perspective—structural, technological, economic, financial, political, planning, and policy—that has been largely absent in discussions on the subject, to provide a clearer and broader understanding of the challenges facing US infrastructure. The book is divided into three parts: Part I looks at the challenges from a structural, technological, and sustainability perspective; Part II from an economic, productivity, and finance perspective; and Part III from an institutional, security, and political perspective. Written primarily for policy makers, managers, and administrators in public and private organizations, as well as individuals and academics with an interest in the future of US infrastructure, this book provides an in-depth analysis of the US infrastructure problem, its causes and consequences, and suggests timely, specific measures that may be taken at the state, local, and federal levels to improve and better secure our roads, transit, public buildings, economy, and technology.
