Download or read book Stability Studies of CdTe CdS Thin Film Solar Cells written by Bhaskar Reddy Tetali and published by . This book was released on 2005 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Diffusion of Cui+ ions from the back contact along CdTe grain boundaries had been previously reported [16]. An increase in light/dark J-V crossover and bulk Rs with stress time and temperature was observed. A slow degradation component attributed to Cu-related substitutional defect [23] formation/diffusion to the junction and CdS is proposed. This should compensate the CdS over time and increase its photoconductivity/resistivity. An improvement in the current collection and FF within 100 hours of LS was observed. This is possibly due to the enhancement of Cui+ diffusion into the junction and CdS during LS as previously reported [16]. A reduction in light/dark J-V crossover was observed, possibly due to an increase in CdS doping and reduction in the CdS/SnO2 front contact barrier. However, a fast decrease in Voc and increase in recombination current was also observed in the first 1000 hours of LS.
Download or read book Fundamentals Of Solar Cells written by Alan Fahrenbruch and published by Elsevier. This book was released on 2012-12-02 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Solar Cells: Photovoltaic Solar Energy Conversion provides an introduction to the fundamental physical principles of solar cells. It aims to promote the expansion of solar photovoltaics from relatively small and specialized use to a large-scale contribution to energy supply. The book begins with a review of basic concepts such as the source of energy, the role of photovoltaic conversion, the development of photovoltaic cells, and sequence of phenomena involved in solar power generation. This is followed by separate chapters on each of the processes that take place in solar cell. These include solar input; properties of semiconductors; recombination and the flow of photogenerated carriers; charge separation and the characteristics of junction barriers; and calculation of solar efficiency. Subsequent chapters deal with the operation of specific solar cell devices such as a single-crystal homojunction (Si); a single-crystal-heterojunction/buried-homojunction (AlGaAs/GaAs); and a polycrystalline, thin-film cell (CuxS/CdS). This book is intended for upper-level graduate students who have a reasonably good understanding of solid state physics and for scientists and engineers involved in research and development of solar cells.
Download or read book CdTe CdS Thin Film Solar Cells Fabricated on Flexible Substrates written by Vasilios Palekis and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Cadmium Telluride (CdTe) is a leading thin film photovoltaic (PV) material due to its near ideal bandgap of 1.45 eV and its high optical absorption coefficient. The typical CdTe thin film solar cell is of the superstrate configuration where a window layer (CdS), the absorber (CdTe) and a back contact are deposited onto glass coated with a transparent electrode. Substrate CdTe solar cells where the above listed films are deposited in reverse are not common. In this study substrate CdTe solar cells are fabricated on flexible foils. The properties of the Molybdenum back contact, Zinc Telluride (ZnTe) interlayer and CdTe absorber on the flexible foils were studied and characterized using X-Ray Diffraction (XRD), and Scanning Electron Microscopy (SEM). Substrate curvature and film flaking was observed during the fabrication as a result of differences in thermal expansion coefficients between the substrate and the deposited films, and also due to impurity diffusion from the foil into the film stack. In order to overcome this problem diffusion barriers where used to eliminate contamination. Silicon dioxide (SiO2), silicon nitride (Si3N4) and molybdenum nitride (MoxNy) were used as such barriers. Electrical characterization of completed devices was carried out by Current-Voltage (J-V), Capacitance-Voltage (C-V) and Spectral Response (SR) measurements. Roll-over was observed in the first quadrant of J-V curves indicating the existence of a back barrier due to a Schottky back contact. The formation of non-rectifying contact to p-CdTe thin-film is one of the major and critical challenges associated with the fabrication of efficient and stable solar cells. Several materials (ZnTe, Cu, Cu2Te, and Te) were studied as potential candidates for the formation of an effective back contact.
Download or read book NBS DOE Workshop Stability of Thin Film Solar Cells and Materials written by David E. Sawyer and published by . This book was released on 1979 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Solar Cells and Modules written by Arvind Shah and published by Springer Nature. This book was released on 2020-07-16 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a comprehensive introduction to the field of photovoltaic (PV) solar cells and modules. In thirteen chapters, it addresses a wide range of topics including the spectrum of light received by PV devices, the basic functioning of a solar cell, and the physical factors limiting the efficiency of solar cells. It places particular emphasis on crystalline silicon solar cells and modules, which constitute today more than 90 % of all modules sold worldwide. Describing in great detail both the manufacturing process and resulting module performance, the book also touches on the newest developments in this sector, such as Tunnel Oxide Passivated Contact (TOPCON) and heterojunction modules, while dedicating a major chapter to general questions of module design and fabrication. Overall, it presents the essential theoretical and practical concepts of PV solar cells and modules in an easy-to-understand manner and discusses current challenges facing the global research and development community.
Download or read book Chalcogenide Photovoltaics written by Roland Scheer and published by John Wiley & Sons. This book was released on 2011-03-31 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first comprehensive description of the most important material properties and device aspects closes the gap between general books on solar cells and journal articles on chalcogenide-based photovoltaics. Written by two very renowned authors with years of practical experience in the field, the book covers II-VI and I-III-VI2 materials as well as energy conversion at heterojunctions. It also discusses the latest semiconductor heterojunction models and presents modern analysis concepts. Thin film technology is explained with an emphasis on current and future techniques for mass production, and the book closes with a compendium of failure analysis in photovoltaic thin film modules. With its overview of the semiconductor physics and technology needed, this practical book is ideal for students, researchers, and manufacturers, as well as for the growing number of engineers and researchers working in companies and institutes on chalcogenide photovoltaics.
Download or read book Performance and Stability of CdTe CdS Solar Cells for Terrestrial and Space Applications written by Derk Leander Bätzner and published by . This book was released on 2002 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Characterization of Thin Film Solar Cells written by Mowafak Al-Jassim and published by Institution of Engineering and Technology. This book was released on 2020-09-17 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polycrystalline thin-film solar cells have reached a levelized cost of energy that is competitive with all other sources of electricity. The technology has significantly improved in recent years, with laboratory cell efficiencies for cadmium telluride (CdTe), perovskites, and copper indium gallium diselenide (CIGS) each exceeding 22 percent. Both CdTe and CIGS solar panels are now produced at the gigawatt scale. However, there are ongoing challenges, including the continued need to improve performance and stability while reducing cost. Advancing polycrystalline solar cell technology demands an in-depth understanding of efficiency, scaling, and degradation mechanisms, which requires sophisticated characterization methods. These methods will enable researchers and manufacturers to improve future solar modules and systems.
Download or read book Coatings and Thin Film Technologies written by Jaime Andres Perez Taborda and published by BoD – Books on Demand. This book was released on 2019-01-03 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of coatings and thin-film technologies is rapidly advancing to keep up with new uses for semiconductor, optical, tribological, thermoelectric, solar, security, and smart sensing applications, among others. In this sense, thin-film coatings and structures are increasingly sophisticated with more specific properties, new geometries, large areas, the use of heterogeneous materials and flexible and rigid coating substrates to produce thin-film structures with improved performance and properties in response to new challenges that the industry presents. This book aims to provide the reader with a complete overview of the current state of applications and developments in thin-film technology, discussing applications, health and safety in thin films, and presenting reviews and experimental results of recognized experts in the area of coatings and thin-film technologies.
Download or read book Thin Film Solar Cells written by K. L. Chopra and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: "You, 0 Sun, are the eye of the world You are the soul of all embodied beings You are the source of all creatures You are the discipline of all engaged in work" - Translated from Mahabharata 3rd Century BC Today, energy is the lifeline and status symbol of "civilized" societies. All nations have therefore embarked upon Research and Development pro grams of varying magnitudes to explore and effectively utilize renewable sources of energy. Albeit a low-grade energy with large temporal and spatial variations, solar energy is abundant, cheap, clean, and renewable, and thus presents a very attractive alternative source. The direct conver sion of solar energy to electricity (photovoltaic effect) via devices called solar cells has already become an established frontier area of science and technology. Born out of necessity for remote area applications, the first commercially manufactured solar cells - single-crystal silicon and thin film CdS/Cu2S - were available well over 20 years ago. Indeed, all space vehicles today are powered by silicon solar cells. But large-scale terrestrial applications of solar cells still await major breakthroughs in terms of discovering new and radical concepts in solar cell device structures, utilizing relatively more abundant, cheap, and even exotic materials, and inventing simpler and less energy intensive fabrication processes. No doubt, this extraordinary challenge in R/D has led to a virtual explosion of activities in the field of photovoltaics in the last several years.
Download or read book Thin Film Solar Cells written by Yoshihiro Hamakawa and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first comprehensive book on thin-film solar cells, potentially a key technology for solving the energy production problem in the 21st century in an environmentally friendly way. It covers a wide range of scientific and technological aspects of thin film semiconductors - deposition technologies, growth mechanisms and the basic properties of amorphous and nano-crystalline silicon - as well as the optimum design theory and device physics of high-efficiency solar cells, especially of single-junction and multi-junction solar cells. The development of large-area solar cell modules using single and multi-junction solar cells is also considered. Examples of recent photovoltaic systems are presented and analysed.
Download or read book Stability Issues in Sputtered CdS CdTe Solar Cells written by Naba Raj Paudel and published by . This book was released on 2011 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thin Film Solar Cells written by Jef Poortmans and published by John Wiley & Sons. This book was released on 2006-10-02 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin-film solar cells are either emerging or about to emerge from the research laboratory to become commercially available devices finding practical various applications. Currently no textbook outlining the basic theoretical background, methods of fabrication and applications currently exist. Thus, this book aims to present for the first time an in-depth overview of this topic covering a broad range of thin-film solar cell technologies including both organic and inorganic materials, presented in a systematic fashion, by the scientific leaders in the respective domains. It covers a broad range of related topics, from physical principles to design, fabrication, characterization, and applications of novel photovoltaic devices.
Download or read book Study of Back Contact Formation on CdTe CdS Thin Film Solar Cells written by Jian Tang and published by . This book was released on 1998 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Impurity and Back Contact Effects on CdTe CdS Thin Film Solar Cells written by Hehong Zhao and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: ABSTRACT: CdTe/CdS thin film solar cells are the most promising cost-effective solar cells. The goal of this project is to improve the performance for CdS/CdTe devices by improving the open circuit voltage V[subscript]oc and current density J[subscript]sc. Efforts focused on increasing the V[subscript]oc, which include increasing the doping concentration by introducing Phosphorus and Antimony, finding and testing new back contact materials, and varying the ambient of CSS CdTe. In addition, the effect of Zn2SnO4 on the cells' performance was also studied. Electrical characterization of the thin films and completed devices were carried out by Current-Voltage (J-V), Capacitance-Voltage (C-V), and Spectral Response (SR) measurements. Structural/chemical characterization was done by SEM, XRD and EDS analysis. The ambient of CSS CdTe affects the growth rate, the grain size and electronic properties of CdTe. The N2/O2 mixture with varied ratio (N2/O2=9/1, 7/3, 5/5 and 1/9) was used in this study. The cells' performance and the net carrier concentration were studied as a function of the N2/O2 ratio. The net carrier concentration increases with the increasing O2 concentration. The extrinsic impurities (P and Sb) were incorporated into CdTe layer. Phosphorus was directly introduced into CSS CdTe source. The Sb was incorporated into CdTe by a diffusion process. The effects of the annealing parameters, the excess Sb on CdTe surface, the CdCl2 treatment and the depth of Sb in CdTe were studied. Higher doping concentration up to 1016 cm−3 has been achieved, however, V[subscript]oc is still in the range of 830 mV.
Download or read book Solar Energy Update written by and published by . This book was released on 1984 with total page 884 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Concepts in Photovoltaics written by Arthur J. Nozik and published by Royal Society of Chemistry. This book was released on 2014-07-10 with total page 631 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photovoltaic systems enable the sun’s energy to be converted directly into electricity using semiconductor solar cells. The ultimate goal of photovoltaic research and development is to reduce the cost of solar power to reach or even become lower than the cost of electricity generated from fossil and nuclear fuels. The power conversion efficiency and the cost per unit area of the phototvoltaic system are critical factors that determine the cost of photovoltaic electricity. Until recently, the power conversion efficiency of single-junction photovoltaic cells has been limited to approximately 33% - the so-called Shockley-Queisser limit. This book presents the latest developments in photovoltaics which seek to either reach or surpass the Shockley-Queisser limit, and to lower the cell cost per unit area. Progress toward this ultimate goal is presented for the three generations of photovoltaic cells: the 1st generation based on crystalline silicon semiconductors; the 2nd generation based on thin film silicon, compound semiconductors, amorphous silicon, and various mesoscopic structures; and the 3rd generation based on the unique properties of nanoscale materials, new inorganic and organic photoconversion materials, highly efficient multi-junction cells with low cost solar concentration, and novel photovoltaic processes. The extent to which photovoltaic materials and processes can meet the expectations of efficient and cost effective solar energy conversion to electricity is discussed. Written by an international team of expert contributors, and with researchers in academia, national research laboratories, and industry in mind, this book is a comprehensive guide to recent progress in photovoltaics and essential for any library or laboratory in the field.
