Download or read book Solid Oxide Based Electrochemical Devices written by Massimiliano Lo Faro and published by Academic Press. This book was released on 2020-03-26 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid Oxide-Based Electrochemical Devices: Advances, Smart Materials and Future Energy Applications provides a complete overview of the theoretical and applied aspects of energy-related solid oxide technologies. The book presents detailed thermodynamic and other basic requirements for fuel cells, electrolyzers, supercapacitors, batteries, sensors and air treatment devices. It delves into physical-chemical, electrochemical and mechanical properties of smart materials developed and offers insights into fundamental analysis and modeling. Detailed protocols for operation are suggested and discussed, including component development to optimize functionality, cost and upscaling. Practitioners in the fuel cell or power to gas industries, engineering researchers developing new technologies in those areas, and device and system designers can use the in-depth, structured information about the relationship between technologies and materials offered to make better-informed decisions during the planning and implementation of those technologies. Covers the theoretical concepts, components, advances and applications of solid oxide fuel cell, electrolyzer, battery, sensor and pollution abatement technologies Explores applications of new smart and metamaterials in the construction of energy-related solid oxide devices Presents examples of prototypes, including their cost estimate and requirements for large-scale production, integration and operation
Download or read book Solid Oxide Fuel Cells written by Bin Zhu and published by John Wiley & Sons. This book was released on 2020-06-02 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents innovative approaches towards affordable, highly efficient, and reliable sustainable energy systems Written by leading experts on the subject, this book provides not only a basic introduction and understanding of conventional fuel cell principle, but also an updated view of the most recent developments in this field. It focuses on the new energy conversion technologies based on both electrolyte and electrolyte-free fuel cells?from advanced novel ceria-based composite electrolyte low temperature solid oxide fuel cells to non-electrolyte fuel cells as advanced fuel-to-electricity conversion technology. Solid Oxide Fuel Cells: From Electrolyte-Based to Electrolyte-Free Devices is divided into three parts. Part I covers the latest developments of anode, electrolyte, and cathode materials as well as the SOFC technologies. Part II discusses the non-electrolyte or semiconductor-based membrane fuel cells. Part III focuses on engineering efforts on materials, technology, devices and stack developments, and looks at various applications and new opportunities of SOFC using both the electrolyte and non-electrolyte principles, including integrated fuel cell systems with electrolysis, solar energy, and more. -Offers knowledge on how to realize highly efficient fuel cells with novel device structures -Shows the opportunity to transform the future fuel cell markets and the possibility to commercialize fuel cells in an extended range of applications -Presents a unique collection of contributions on the development of solid oxide fuel cells from electrolyte based to non-electrolyte-based technology -Provides a more comprehensive understanding of the advances in fuel cells and bridges the knowledge from traditional SOFC to the new concept -Allows readers to track the development from the conventional SOFC to the non-electrolyte or single-component fuel cell Solid Oxide Fuel Cells: From Electrolyte-Based to Electrolyte-Free Devices will serve as an important reference work to students, scientists, engineers, researchers, and technology developers in the fuel cell field.
Download or read book Solid Oxide Fuel Cells written by Bin Zhu and published by John Wiley & Sons. This book was released on 2020-02-12 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents innovative approaches towards affordable, highly efficient, and reliable sustainable energy systems Written by leading experts on the subject, this book provides not only a basic introduction and understanding of conventional fuel cell principle, but also an updated view of the most recent developments in this field. It focuses on the new energy conversion technologies based on both electrolyte and electrolyte-free fuel cells?from advanced novel ceria-based composite electrolyte low temperature solid oxide fuel cells to non-electrolyte fuel cells as advanced fuel-to-electricity conversion technology. Solid Oxide Fuel Cells: From Electrolyte-Based to Electrolyte-Free Devices is divided into three parts. Part I covers the latest developments of anode, electrolyte, and cathode materials as well as the SOFC technologies. Part II discusses the non-electrolyte or semiconductor-based membrane fuel cells. Part III focuses on engineering efforts on materials, technology, devices and stack developments, and looks at various applications and new opportunities of SOFC using both the electrolyte and non-electrolyte principles, including integrated fuel cell systems with electrolysis, solar energy, and more. -Offers knowledge on how to realize highly efficient fuel cells with novel device structures -Shows the opportunity to transform the future fuel cell markets and the possibility to commercialize fuel cells in an extended range of applications -Presents a unique collection of contributions on the development of solid oxide fuel cells from electrolyte based to non-electrolyte-based technology -Provides a more comprehensive understanding of the advances in fuel cells and bridges the knowledge from traditional SOFC to the new concept -Allows readers to track the development from the conventional SOFC to the non-electrolyte or single-component fuel cell Solid Oxide Fuel Cells: From Electrolyte-Based to Electrolyte-Free Devices will serve as an important reference work to students, scientists, engineers, researchers, and technology developers in the fuel cell field.
Download or read book High temperature Solid Oxide Fuel Cells for the 21st Century written by Kevin Kendall and published by Elsevier. This book was released on 2015-11-21 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-temperature Solid Oxide Fuel Cells, Second Edition, explores the growing interest in fuel cells as a sustainable source of energy. The text brings the topic of green energy front and center, illustrating the need for new books that provide comprehensive and practical information on specific types of fuel cells and their applications. This landmark volume on solid oxide fuel cells contains contributions from experts of international repute, and provides a single source of the latest knowledge on this topic. A single source for all the latest information on solid oxide fuel cells and their applications Illustrates the need for new, more comprehensive books and study on the topic Explores the growing interest in fuel cells as viable, sustainable sources of energy
Download or read book High temperature Solid Oxide Fuel Cells Fundamentals Design and Applications written by S.C. Singhal and published by Elsevier. This book was released on 2003-12-08 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Temperature Solid Oxide Fuel Cells: Fundamentals, Design and Applications provides a comprehensive discussion of solid oxide fuel cells (SOFCs). SOFCs are the most efficient devices for the electrochemical conversion of chemical energy of hydrocarbon fuels into electricity, and have been gaining increasing attention for clean and efficient distributed power generation. The book explains the operating principle, cell component materials, cell and stack designs and fabrication processes, cell and stack performance, and applications of SOFCs. Individual chapters are written by internationally renowned authors in their respective fields, and the text is supplemented by a large number of references for further information. The book is primarily intended for use by researchers, engineers, and other technical people working in the field of SOFCs. Even though the technology is advancing at a very rapid pace, the information contained in most of the chapters is fundamental enough for the book to be useful even as a text for SOFC technology at the graduate level.
Download or read book Perovskite Oxide for Solid Oxide Fuel Cells written by Tatsumi Ishihara and published by Springer Science & Business Media. This book was released on 2009-06-12 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel cell technology is quite promising for conversion of chemical energy of hydrocarbon fuels into electricity without forming air pollutants. There are several types of fuel cells: polymer electrolyte fuel cell (PEFC), phosphoric acid fuel cell (PAFC), molten carbonate fuel cell (MCFC), solid oxide fuel cell (SOFC), and alkaline fuel cell (AFC). Among these, SOFCs are the most efficient and have various advantages such as flexibility in fuel, high reliability, simple balance of plant (BOP), and a long history. Therefore, SOFC technology is attracting much attention as a power plant and is now close to marketing as a combined heat and power generation system. From the beginning of SOFC development, many perovskite oxides have been used for SOFC components; for example, LaMnO -based oxide for the cathode and 3 LaCrO for the interconnect are the most well known materials for SOFCs. The 3 current SOFCs operate at temperatures higher than 1073 K. However, lowering the operating temperature of SOFCs is an important goal for further SOFC development. Reliability, durability, and stability of the SOFCs could be greatly improved by decreasing their operating temperature. In addition, a lower operating temperature is also beneficial for shortening the startup time and decreasing energy loss from heat radiation. For this purpose, faster oxide ion conductors are required to replace the conventional Y O -stabilized ZrO 2 3 2 electrolyte. A new class of electrolytes such as LaGaO is considered to be 3 highly useful for intermediate-temperature SOFCs.
Download or read book Solid Oxide Fuel Cells written by Meng Ni and published by Royal Society of Chemistry. This book was released on 2013-08-16 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid oxide fuel cells (SOFCs) are promising electrochemical power generation devices that can convert chemical energy of a fuel into electricity in an efficient, environmental-friendly, and quiet manner. Due to their high operating temperature, SOFCs feature fuel flexibility as internal reforming of hydrocarbon fuels and ammonia thermal cracking can be realized in SOFC anode. This book presents an overview of the SOFC technology with a focus on the recent developments in new technologies and new ideas for addressing the key issues of SOFC development. This book first introduces the fundamental principles of SOFCs and compares SOFC technology with conventional heat engines as well as low temperature fuel cells. Then the latest developments in SOFC R&D are reviewed and future directions are discussed. Key issues related to SOFC performance improvement, long-term stability, mathematical modelling, as well as system integration/control are addressed, including material development, infiltration technique for nano-structured electrode fabrication, focused ion beam – scanning electron microscopy (FIB-SEM) technique for microstructure reconstruction, the Lattice Boltzmann Method (LBM) simulation at pore scale, multi-scale modelling, SOFC integration with buildings and other cycles for stationary applications.
Download or read book Intermediate Temperature Solid Oxide Fuel Cells written by Gurbinder Kaur and published by Elsevier. This book was released on 2019-11-21 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intermediate Temperature Solid Oxide Fuel Cells: Electrolytes, Electrodes and Interconnects introduces the fundamental principles of intermediate solid oxide fuel cells technology. It provides the reader with a broad understanding and practical knowledge of the electrodes, pyrochlore/perovskite/oxide electrolytes and interconnects which form the backbone of the Solid Oxide Fuel Cell (SOFC) unit. Opening with an introduction to the thermodynamics, physiochemical and electrochemical behavior of Solid Oxide Fuel Cells (SOFC), the book also discusses specific materials, including low temperature brownmillerites and aurivillius electrolytes, as well as pyrochlore interconnects. This book analyzes the basic concepts, providing cutting-edge information for both researchers and students. It is a complete reference for Intermediate Solid Oxide Fuel Cells technology that will be a vital resource for those working in materials science, fuel cells and solid state chemistry. Provides a single source of information on glass, electrolytes, interconnects, vanadates, pyrochlores and perovskite SOFC Includes illustrations that provide a clear visual explanation of concepts being discussed Progresses from a discussion of basic concepts that will enable readers to easily comprehend the subject matter
Download or read book Gas Transport in Solid Oxide Fuel Cells written by Weidong He and published by Springer. This book was released on 2014-09-03 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of contemporary research and emerging measurement technologies associated with gas transport in solid oxide fuel cells. Within these pages, an introduction to the concept of gas diffusion in solid oxide fuel cells is presented. This book also discusses the history and underlying fundamental mechanisms of gas diffusion in solid oxide fuel cells, general theoretical mathematical models for gas diffusion, and traditional and advanced techniques for gas diffusivity measurement.
Download or read book Solid State Ionic Devices 6 Nano Ionics written by E. D. Wachsman and published by The Electrochemical Society. This book was released on 2009-09 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid-state electrochemical devices, such as batteries, fuel cells, membranes, and sensors, are critical components of technologically advanced societies in the 21st Century and beyond. The development of these devices involves common research themes such as ion transport, interfacial phenomena, and device design and performance, regardless of the class of materials or whether the solid state is amorphous or crystalline. The intent of this international symposia series is to provide a forum for recent advances in solid-state ion conducting materials and the design, fabrication, and performance of devices that utilize them. The papers in this issue of ECS Transactions were presented at the 6th Solid State Ionic Devices symposium, at the 214th meeting of The Electrochemical Society, October 12-17, 2008 in Honolulu, Hawaii.
Download or read book Solid State Ionic Devices 10 written by E. Traversa and published by The Electrochemical Society. This book was released on 2014 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Oxide Based Nanostructured Electrocatalysts for Fuel Cells Electrolyzers and Metal Air Batteries written by Teko Napporn and published by Elsevier. This book was released on 2021-01-30 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide-Based Nanostructured Electrocatalysts for Fuel Cells, Electrolyzers, and Metal-Air Batteries is a comprehensive book summarizing the recent overview of these new materials developed to date. The book is motivated by research that focuses on the reduction of noble metal content in catalysts to reduce the cost associated to the entire system. Metal oxides gained significant interest in heterogeneous catalysis for basic research and industrial deployment. Metal Oxide-Based Nanostructured Electrocatalysts for Fuel Cells, Electrolyzers, and Metal-Air Batteries puts these opportunities and challenges into a broad context, discusses the recent researches and technological advances, and finally provides several pathways and guidelines that could inspire the development of ground-breaking electrochemical devices for energy production or storage. Its primary focus is how materials development is an important approach to produce electricity for key applications such as automotive and industrial. The book is appropriate for those working in academia and R&D in the disciplines of materials science, chemistry, electrochemistry, and engineering. Includes key aspects of materials design to improve the performance of electrode materials for energy conversion and storage device applications Reviews emerging metal oxide materials for hydrogen production, hydrogen oxidation, oxygen reduction and oxygen evolution Discusses metal oxide electrocatalysts for water-splitting, metal-air batteries, electrolyzer, and fuel cell applications
Download or read book Materials for Fuel Cells written by M Gasik and published by Elsevier. This book was released on 2008-10-27 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: A fuel cell is an electrochemical device that converts the chemical energy of a reaction (between fuel and oxidant) directly into electricity. Given their efficiency and low emissions, fuel cells provide an important alternative to power produced from fossil fuels. A major challenge in their use is the need for better materials to make fuel cells cost-effective and more durable. This important book reviews developments in materials to fulfil the potential of fuel cells as a major power source. After introductory chapters on the key issues in fuel cell materials research, the book reviews the major types of fuel cell. These include alkaline fuel cells, polymer electrolyte fuel cells, direct methanol fuel cells, phosphoric acid fuel cells, molten carbonate fuel cells, solid oxide fuel cells and regenerative fuel cells. The book concludes with reviews of novel fuel cell materials, ways of analysing performance and issues affecting recyclability and life cycle assessment. With its distinguished editor and international team of contributors, Materials for fuel cells is a valuable reference for all those researching, manufacturing and using fuel cells in such areas as automotive engineering. Examines the key issues in fuel cell materials research Reviews the major types of fuel cells such as direct methanol and regenerative fuel cells Further chapters explore ways of analysing performance and issues affecting recyclability and life cycle assessment
Download or read book 3D Printing for Energy Applications written by Albert Tarancón and published by John Wiley & Sons. This book was released on 2021-03-11 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D PRINTING FOR ENERGY APPLICATIONS Explore current and future perspectives of 3D printing for the fabrication of high value-added complex devices 3D Printing for Energy Applications delivers an insightful and cutting-edge exploration of the applications of 3D printing to the fabrication of complex devices in the energy sector. The book covers aspects related to additive manufacturing of functional materials with applicability in the energy sector. It reviews both the technology of printable materials and 3D printing strategies itself, and its use in energy devices or systems. Split into three sections, the book covers the 3D printing of functional materials before delving into the 3D printing of energy devices. It closes with printing challenges in the production of complex objects. It also presents an interesting perspective on the future of 3D printing of complex devices. Readers will also benefit from the inclusion of: A thorough introduction to 3D printing of functional materials, including metals, ceramics, and composites An exploration of 3D printing challenges for production of complex objects, including computational design, multimaterials, tailoring AM components, and volumetric additive manufacturing Practical discussions of 3D printing of energy devices, including batteries, supercaps, solar panels, fuel cells, turbomachinery, thermoelectrics, and CCUS Perfect for materials scientists, 3D Printing for Energy Applications will also earn a place in the libraries of graduate students in engineering, chemistry, and material sciences seeking a one-stop reference for current and future perspectives on 3D printing of high value-added complex devices.
Download or read book Solid state Ionic Devices written by E. D. Wachsman and published by The Electrochemical Society. This book was released on 1999 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Electrolyte Based Electrochemical Devices written by Massimiliano Lo Faro and published by Elsevier. This book was released on 2023-11-01 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Electrolyte–Based Electrochemical Devices: Advances, provides a complete overview of the theoretical and applied aspects of energy-related polymer electrolyte-based technologies. The book presents detailed thermodynamic and other basic requirements for smart materials like fuel cells, electrolyzers, batteries, sensors and devices for the abatement of pollutants. Delving into the physical-chemical, electrochemical, and mechanical properties of smart materials, it covers fundamental analysis and modeling to optimize the application of smart materials in terms of conductivity, chemical stability and kinetic properties. Detailed protocols for operation are suggested and discussed, including component development to optimize functionality, cost and upscaling. By exploring examples of actual prototypes based on recent research findings, analyzing requirements and cost estimate for large-scale production and implementation, as well as for their integration into existing systems, the environmental impact of multiple electrochemical applications is also examined. Covers both the fundamental and technological aspects of electrochemistry Includes discussions of prototypes, advanced materials, large scale production and the economics of smart materials Addresses technologies for energy production, storage, environmental protection and environmental control
Download or read book Electrochemical Technologies for Energy Storage and Conversion written by Jiujun Zhang and published by John Wiley & Sons. This book was released on 2012-03-27 with total page 842 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this handbook and ready reference, editors and authors from academia and industry share their in-depth knowledge of known and novel materials, devices and technologies with the reader. The result is a comprehensive overview of electrochemical energy and conversion methods, including batteries, fuel cells, supercapacitors, hydrogen generation and storage as well as solar energy conversion. Each chapter addresses electrochemical processes, materials, components, degradation mechanisms, device assembly and manufacturing, while also discussing the challenges and perspectives for each energy storage device in question. In addition, two introductory chapters acquaint readers with the fundamentals of energy storage and conversion, and with the general engineering aspects of electrochemical devices. With its uniformly structured, self-contained chapters, this is ideal reading for entrants to the field as well as experienced researchers.
