Download or read book Small Scale Deformation using Advanced Nanoindentation Techniques written by Ting Tsui and published by MDPI. This book was released on 2019-06-11 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Small scale mechanical deformations have gained a significant interest over the past few decades, driven by the advances in integrated circuits and microelectromechanical systems. One of the most powerful and versatile characterization methods is the nanoindentation technique. The capabilities of these depth-sensing instruments have been improved considerably. They can perform experiments in vacuum and at high temperatures, such as in-situ SEM and TEM nanoindenters. This allows researchers to visualize mechanical deformations and dislocations motion in real time. Time-dependent behavior of soft materials has also been studied in recent research works. This Special Issue on "Small Scale Deformation using Advanced Nanoindentation Techniques"; will provide a forum for researchers from the academic and industrial communities to present advances in the field of small scale contact mechanics. Materials of interest include metals, glass, and ceramics. Manuscripts related to deformations of biomaterials and biological related specimens are also welcome. Topics of interest include, but are not limited to: Small scale facture Nanoscale plasticity and creep Size-dependent deformation phenomena Deformation of biological cells Mechanical properties of cellular and sub-cellular components Novel mechanical properties characterization techniques New modeling methods Environmentally controlled nanoindentation In-situ SEM and TEM indentation

Download or read book Small Scale Deformation using Advanced Nanoindentation Techniques written by Ting Tsui and published by . This book was released on 2019 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Small scale mechanical deformations have gained a significant interest over the past few decades, driven by the advances in integrated circuits and microelectromechanical systems. One of the most powerful and versatile characterization methods is the nanoindentation technique. The capabilities of these depth-sensing instruments have been improved considerably. They can perform experiments in vacuum and at high temperatures, such as in-situ SEM and TEM nanoindenters. This allows researchers to visualize mechanical deformations and dislocations motion in real time. Time-dependent behavior of soft materials has also been studied in recent research works. This Special Issue on ""Small Scale Deformation using Advanced Nanoindentation Techniques""; will provide a forum for researchers from the academic and industrial communities to present advances in the field of small scale contact mechanics. Materials of interest include metals, glass, and ceramics. Manuscripts related to deformations of biomaterials and biological related specimens are also welcome. Topics of interest include, but are not limited to.

Download or read book Testing of the Plastic Deformation of Metals written by T. W. Clyne and published by Cambridge University Press. This book was released on 2021-06-10 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover a novel, self-contained approach to an important technical area, providing both theoretical background and practical details. Coverage includes mechanics and physical metallurgy, as well as study of both established and novel procedures such as indentation plastometry. Numerical simulation (FEM modelling) is explored thoroughly, and issues of scale are discussed in depth. Discusses procedures designed to explore plasticity under various conditions, and relates sample responses to deformation mechanisms, including microstructural effects. Features references throughout to industrial processing and component usage conditions, to a wide range of metallic alloys, and to effects of residual stresses, anisotropy and inhomogeneity within samples. A perfect tool for materials scientists, engineers and researchers involved in mechanical testing (of metals), and those involved in the development of novel materials and components.

Download or read book Mechanical Testing of Materials written by Emmanuel Gdoutos and published by Springer Nature. This book was released on 2024-01-19 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive and in-depth exploration of the most widely used test methods for characterizing the deformation and failure behavior of materials. It presents a thorough treatise on mechanical testing, providing a valuable resource for researchers, engineers, and students seeking to understand the mechanical properties and performance of materials across various applications. The book is organized into ten chapters dedicated to specific test methods including tensile, compression, bending, torsion, multiaxial, indentation, fracture, fatigue, creep, high strain rates, nondestructive evaluation, ensuring a thorough examination of each technique's principles, procedures, and applications. It features two special chapters focusing specifically on the mechanical characterization of concrete and fiber composite materials. These chapters delve into the unique aspects and challenges associated with testing and analyzing these specific materials.

Download or read book Advanced Nanoindentation in Materials written by Ting Tsui and published by MDPI. This book was released on 2018-03-05 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Advanced Nanoindentation in Materials" that was published in Materials

Download or read book Applied Nanoindentation in Advanced Materials written by Atul Tiwari and published by John Wiley & Sons. This book was released on 2017-10-30 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research in the area of nanoindentation has gained significant momentum in recent years, but there are very few books currently available which can educate researchers on the application aspects of this technique in various areas of materials science. Applied Nanoindentation in Advanced Materials addresses this need and is a comprehensive, self-contained reference covering applied aspects of nanoindentation in advanced materials. With contributions from leading researchers in the field, this book is divided into three parts. Part one covers innovations and analysis, and parts two and three examine the application and evaluation of soft and ceramic-like materials respectively. Key features: A one stop solution for scholars and researchers to learn applied aspects of nanoindentation Contains contributions from leading researchers in the field Includes the analysis of key properties that can be studied using the nanoindentation technique Covers recent innovations Includes worked examples Applied Nanoindentation in Advanced Materials is an ideal reference for researchers and practitioners working in the areas of nanotechnology and nanomechanics, and is also a useful source of information for graduate students in mechanical and materials engineering, and chemistry. This book also contains a wealth of information for scientists and engineers interested in mathematical modelling and simulations related to nanoindentation testing and analysis.

Download or read book Advanced Nanoindentation in Materials written by and published by . This book was released on with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation This Special Issue "Advanced Nanoindentation in Materials" contains some of the latest developments in the field of small-scale contact mechanics for a wide range of materials and biological cells. The featured manuscript revealed a new ultra-high strain rate nanoindentation method that will enable new scientific understanding of time-dependent material properties. The book also presents unique material properties of super alloys and other structural materials characterized by indentation methods. In addition to engineering materials, deformation behaviors of live cancer cells on sharp pillar structures were discussed in this book with the hope to stimulate interest in the mechanical contact behaviors of biological cells.

Download or read book Advanced Nanoindentation in Materials written by Matt Pharr (Ed.) and published by . This book was released on 2018 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue "Advanced Nanoindentation in Materials" contains some of the latest developments in the field of small-scale contact mechanics for a wide range of materials and biological cells. The featured manuscript revealed a new ultra-high strain rate nanoindentation method that will enable new scientific understanding of time-dependent material properties. The book also presents unique material properties of super alloys and other structural materials characterized by indentation methods. In addition to engineering materials, deformation behaviors of live cancer cells on sharp pillar structures were discussed in this book with the hope to stimulate interest in the mechanical contact behaviors of biological cells.

Download or read book Mechanics of Advanced Materials written by Vadim V. Silberschmidt and published by Springer. This book was released on 2015-04-09 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents interesting examples of recent developments in this area. Among the studied materials are bulk metallic glasses, metamaterials, special composites, piezoelectric smart structures, nonwovens, etc. The last decades have seen a large extension of types of materials employed in various applications. In many cases these materials demonstrate mechanical properties and performance that vary significantly from those of their traditional counterparts. Such uniqueness is sought – or even specially manufactured – to meet increased requirements on modern components and structures related to their specific use. As a result, mechanical behaviors of these materials under different loading and environmental conditions are outside the boundaries of traditional mechanics of materials, presupposing development of new characterization techniques, theoretical descriptions and numerical tools. The book presents interesting examples of recent developments in this area. Among the studied materials are bulk metallic glasses, metamaterials, special composites, piezoelectric smart structures, nonwovens, etc.

Download or read book Applied Nanoindentation in Advanced Materials written by Atul Tiwari and published by John Wiley & Sons. This book was released on 2017-08-18 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research in the area of nanoindentation has gained significant momentum in recent years, but there are very few books currently available which can educate researchers on the application aspects of this technique in various areas of materials science. Applied Nanoindentation in Advanced Materials addresses this need and is a comprehensive, self-contained reference covering applied aspects of nanoindentation in advanced materials. With contributions from leading researchers in the field, this book is divided into three parts. Part one covers innovations and analysis, and parts two and three examine the application and evaluation of soft and ceramic-like materials respectively. Key features: A one stop solution for scholars and researchers to learn applied aspects of nanoindentation Contains contributions from leading researchers in the field Includes the analysis of key properties that can be studied using the nanoindentation technique Covers recent innovations Includes worked examples Applied Nanoindentation in Advanced Materials is an ideal reference for researchers and practitioners working in the areas of nanotechnology and nanomechanics, and is also a useful source of information for graduate students in mechanical and materials engineering, and chemistry. This book also contains a wealth of information for scientists and engineers interested in mathematical modelling and simulations related to nanoindentation testing and analysis.

Download or read book Advanced Experimental and Numerical Techniques for Cavitation Erosion Prediction written by Ki-Han Kim and published by Springer. This book was released on 2014-07-08 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive treatment of the cavitation erosion phenomenon and state-of-the-art research in the field. It is divided into two parts. Part 1 consists of seven chapters, offering a wide range of computational and experimental approaches to cavitation erosion. It includes a general introduction to cavitation and cavitation erosion a detailed description of facilities and measurement techniques commonly used in cavitation erosion studies, an extensive presentation of various stages of cavitation damage (including incubation and mass loss) and insights into the contribution of computational methods to the analysis of both fluid and material behavior. The proposed approach is based on a detailed description of impact loads generated by collapsing cavitation bubbles and a physical analysis of the material response to these loads. Part 2 is devoted to a selection of nine papers presented at the International Workshop on Advanced Experimental and Numerical Techniques for Cavitation Erosion Prediction (Grenoble, France, 1-2 March 2011) representing the forefront of research on cavitation erosion. Innovative numerical and experimental investigations illustrate the most advanced breakthroughs in cavitation erosion research.

Download or read book Springer Handbook of Experimental Solid Mechanics written by William N. Sharpe, Jr. and published by Springer Science & Business Media. This book was released on 2008-12-04 with total page 1100 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Springer Handbook of Experimental Solid Mechanics documents both the traditional techniques as well as the new methods for experimental studies of materials, components, and structures. The emergence of new materials and new disciplines, together with the escalating use of on- and off-line computers for rapid data processing and the combined use of experimental and numerical techniques have greatly expanded the capabilities of experimental mechanics. New exciting topics are included on biological materials, MEMS and NEMS, nanoindentation, digital photomechanics, photoacoustic characterization, and atomic force microscopy in experimental solid mechanics. Presenting complete instructions to various areas of experimental solid mechanics, guidance to detailed expositions in important references, and a description of state-of-the-art applications in important technical areas, this thoroughly revised and updated edition is an excellent reference to a widespread academic, industrial, and professional engineering audience.

Download or read book The Nano Micro Interface written by Marcel Van de Voorde and published by John Wiley & Sons. This book was released on 2015-01-12 with total page 771 pages. Available in PDF, EPUB and Kindle. Book excerpt: Controlling the properties of materials by modifying their composition and by manipulating the arrangement of atoms and molecules is a dream that can be achieved by nanotechnology. As one of the fastest developing and innovative -- as well as well-funded -- fields in science, nanotechnology has already significantly changed the research landscape in chemistry, materials science, and physics, with numerous applications in consumer products, such as sunscreens and water-repellent clothes. It is also thanks to this multidisciplinary field that flat panel displays, highly efficient solar cells, and new biological imaging techniques have become reality. This second, enlarged edition has been fully updated to address the rapid progress made within this field in recent years. Internationally recognized experts provide comprehensive, first-hand information, resulting in an overview of the entire nano-micro world. In so doing, they cover aspects of funding and commercialization, the manufacture and future applications of nanomaterials, the fundamentals of nanostructures leading to macroscale objects as well as the ongoing miniaturization toward the nanoscale domain. Along the way, the authors explain the effects occurring at the nanoscale and the nanotechnological characterization techniques. An additional topic on the role of nanotechnology in energy and mobility covers the challenge of developing materials and devices, such as electrodes and membrane materials for fuel cells and catalysts for sustainable transportation. Also new to this edition are the latest figures for funding, investments, and commercialization prospects, as well as recent research programs and organizations.

Download or read book The Nano Micro Interface 2 Volumes written by Marcel Van de Voorde and published by John Wiley & Sons. This book was released on 2015-03-09 with total page 771 pages. Available in PDF, EPUB and Kindle. Book excerpt: Controlling the properties of materials by modifying their composition and by manipulating the arrangement of atoms and molecules is a dream that can be achieved by nanotechnology. As one of the fastest developing and innovative -- as well as well-funded -- fields in science, nanotechnology has already significantly changed the research landscape in chemistry, materials science, and physics, with numerous applications in consumer products, such as sunscreens and water-repellent clothes. It is also thanks to this multidisciplinary field that flat panel displays, highly efficient solar cells, and new biological imaging techniques have become reality. This second, enlarged edition has been fully updated to address the rapid progress made within this field in recent years. Internationally recognized experts provide comprehensive, first-hand information, resulting in an overview of the entire nano-micro world. In so doing, they cover aspects of funding and commercialization, the manufacture and future applications of nanomaterials, the fundamentals of nanostructures leading to macroscale objects as well as the ongoing miniaturization toward the nanoscale domain. Along the way, the authors explain the effects occurring at the nanoscale and the nanotechnological characterization techniques. An additional topic on the role of nanotechnology in energy and mobility covers the challenge of developing materials and devices, such as electrodes and membrane materials for fuel cells and catalysts for sustainable transportation. Also new to this edition are the latest figures for funding, investments, and commercialization prospects, as well as recent research programs and organizations.

Download or read book Advanced Engineering Materials and Modeling written by Ashutosh Tiwari and published by John Wiley & Sons. This book was released on 2016-08-05 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: The engineering of materials with advanced features is driving the research towards the design of innovative materials with high performances. New materials often deliver the best solution for structural applications, precisely contributing towards the finest combination of mechanical properties and low weight. The mimicking of nature's principles lead to a new class of structural materials including biomimetic composites, natural hierarchical materials and smart materials. Meanwhile, computational modeling approaches are the valuable tools complementary to experimental techniques and provide significant information at the microscopic level and explain the properties of materials and their very existence. The modeling also provides useful insights to possible strategies to design and fabricate materials with novel and improved properties. The book brings together these two fascinating areas and offers a comprehensive view of cutting-edge research on materials interfaces and technologies the engineering materials. The topics covered in this book are divided into 2 parts: Engineering of Materials, Characterizations & Applications and Computational Modeling of Materials. The chapters include the following: Mechanical and resistance behavior of structural glass beams Nanocrystalline metal carbides - microstructure characterization SMA-reinforced laminated glass panel Sustainable sugarcane bagasse cellulose for papermaking Electrospun scaffolds for cardiac tissue engineering Bio-inspired composites Density functional theory for studying extended systems First principles based approaches for modeling materials Computer aided materials design Computational materials for stochastic electromagnets Computational methods for thermal analysis of heterogeneous materials Modelling of resistive bilayer structures Modeling tunneling of superluminal photons through Brain Microtubules Computer aided surgical workflow modeling Displaced multiwavelets and splitting algorithms

Download or read book Nanoindentation of Brittle Solids written by Arjun Dey and published by CRC Press. This book was released on 2014-06-25 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the Basics of Nanoindentation and Why It Is Important Contact damage induced brittle fracture is a common problem in the field of brittle solids. In the case of both glass and ceramics—and as it relates to both natural and artificial bio-materials—it has triggered the need for improved fabrication technology and new product development in the industry. The Nanoindentation Technique Is Especially Dedicated to Brittle Materials Nanoindentation of Brittle Solids highlights the science and technology of nanoindentation related to brittle materials, and considers the applicability of the nanoindentation technique. This book provides a thorough understanding of basic contact induced deformation mechanisms, damage initiation, and growth mechanisms. Starting from the basics of contact mechanics and nanoindentation, it considers contact mechanics, addresses contact issues in brittle solids, and explores the concepts of hardness and elastic modulus of a material. It examines a variety of brittle solids and deciphers the physics of deformation and fracture at scale lengths compatible with the microstructural unit block. Discusses nanoindentation data analysis methods and various nanoindentation techniques Includes nanoindentation results from the authors’ recent research on natural biomaterials like tooth, bone, and fish scale materials Considers the nanoindentation response if contact is made too quickly in glass Explores energy issues related to the nanoindentation of glass Describes the nanoindentation response of a coarse grain alumina Examines nanoindentation on microplasma sprayed hydroxyapatite coatings Nanoindentation of Brittle Solids provides a brief history of indentation, and explores the science and technology of nanoindentation related to brittle materials. It also offers an in-depth discussion of indentation size effect; the evolution of shear induced deformation during indentation and scratches, and includes a collection of related research works.

Download or read book Surface Analysis with STM and AFM written by Sergei N. Magonov and published by John Wiley & Sons. This book was released on 2008-09-26 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scanning tunneling microscopy (STM) and atomic force microscopy (AFM) are powerful tools for surface examination. In the past, many STM and AFM studies led to erroneous conclusions due to lack of proper theoretical considerations and of an understanding of how image patterns are affected by measurement conditions. For this book, two world experts, one on theoretical analysis and the other on experimental characterization, have joined forces to bring together essential components of STM and AFM studies: The practical aspects of STM, the image simulation by surface electron density plot calculations, and the qualitative evaluation of tip-force induced surface corrugations. Practical examples are taken from: * inorganic layered materials * organic conductors * organic adsorbates at liquid-solid interfaces * self-assembled amphiphiles * polymers This book will be an invaluable reference work for researchers active in STM and AMF as well as for newcomers to the field.