Download or read book Single Source Chemical Vapour Deposition and II IV Semiconductor Thin Films written by Nguyen Hoang Tran and published by . This book was released on 2000 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thin Films by Chemical Vapour Deposition written by C.E. Morosanu and published by Elsevier Health Sciences. This book was released on 1990-07-26 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt: The explosive growth in the semiconductor industry has caused a rapid evolution of thin film materials that lend themselves to the fabrication of state-of-the-art semiconductor devices. Early in the 1960s an old research technique named chemical vapour phase deposition (CVD), which has several unique advantages, developed into the most widely used technique for thin film preparation in electronics technology. In the last 25 years, tremendous advances have been made in the science and technology of thin films prepared by means of CVD. This book presents in a single volume, an up-to-date overview of the important field of CVD processes which has never been completely reviewed previously. Contents: Part I. 1. Evolution of CVD Films. Introductory remarks. Short history of CVD thin films. II. Fundamentals. 2. Techniques of Preparing Thin Films. Electrolytic deposition techniques. Vacuum deposition techniques. Plasma deposition techniques. Liquid-phase deposition techniques. Solid-phase deposition techniques. Chemical vapour conversion of substrate. Chemical vapour deposition. Comparison between CVD and other thin film deposition techniques. 3. Chemical Processes Used in CVD. Introduction. Description of chemical reactions used in CVD. 4. Thermodynamics of CVD. Feasibility of a CVD process. Techniques for equilibrium calculations in CVD systems. Examples of thermodynamic studies of CVD systems. 5. Kinetics of CVD. Steps and control type of a CVD heterogeneous reaction. Influence of experimental parameters on thin film deposition rate. Continuous measurement of the deposition rate. Experimental methods for studying CVD kinetics. Role of homogeneous reactions in CVD. Mechanism of CVD processes. Kinetics and mechanism of dopant incorporation. Transport phenomena in CVD. Status of kinetic and mechanism investigations in CVD systems. 6. Measurement of Thin Film Thickness. Mechanical methods. Mechanical-optical methods. Optical methods. Electrical methods. Miscellaneous methods. 7. Nucleation and Growth of CVD Films. Stages in the nucleation and growth mechanism. Regimes of nucleation and growth. Nucleation theory. Dependence of nucleation on deposition parameters. Heterogeneous nucleation and CVD film structural forms. Homogeneous nucleation. Experimental techniques. Experimental results of CVD film nucleation. 8. Thin Film Structure. Techniques for studying thin film structure. Structural defects in CVD thin films. 9. Analysis of CVD Films. Analysis techniques of thin film bulk. Analysis techniques of thin film surfaces. Film composition measurement. Depth concentration profiling. 10. Properties of CVD Films. Mechanical properties. Thermal properties. Optical properties. Photoelectric properties. Electrical properties. Magnetic properties. Chemical properties. Part III. 11. Equipment and Substrates. Equipment for CVD. Safety in CVD. Substrates. 12. Preparation and Properties of Semiconducting Thin Films. Homoepitaxial semiconducting films. Heteroepitaxial semiconducting films. 13. Preparation and Properties of Amorphous Insulating Thin Films. Oxides. Nitrides and Oxynitrides. Polymeric thin films. 14. Preparation and Properties of Conductive Thin Films. Metals and metal alloys. Resistor materials. Transparent conducting films. Miscellaneous materials. 15. Preparation and Properties of Superconducting and Magnetic Thin Films. Superconducting materials. Magnetic materials. 16. Uses of CVD Thin Films. Applications in electronics and microelectronics. Applications in the field of microwaves and optoelectronics. Miscellaneous applications. Artificial heterostructures (Quantum wells, superlattices, monolayers, two-dimensional electron gases). Part V. 17. Present and Future Importance of CVD Films. Present status and future trends in CVD films. References. Index of Acronyms and Abbreviations. Author Index. CVD Film Index. Subject Index. Supplier Index.
Download or read book Ionized Physical Vapor Deposition written by and published by Academic Press. This book was released on 1999-10-14 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides the first comprehensive look at a pivotal new technology in integrated circuit fabrication. For some time researchers have sought alternate processes for interconnecting the millions of transistors on each chip because conventional physical vapor deposition can no longer meet the specifications of today's complex integrated circuits. Out of this research, ionized physical vapor deposition has emerged as a premier technology for the deposition of thin metal films that form the dense interconnect wiring on state-of-the-art microprocessors and memory chips.For the first time, the most recent developments in thin film deposition using ionized physical vapor deposition (I-PVD) are presented in a single coherent source. Readers will find detailed descriptions of relevant plasma source technology, specific deposition systems, and process recipes. The tools and processes covered include DC hollow cathode magnetrons, RF inductively coupled plasmas, and microwave plasmas that are used for depositing technologically important materials such as copper, tantalum, titanium, TiN, and aluminum. In addition, this volume describes the important physical processes that occur in I-PVD in a simple and concise way. The physical descriptions are followed by experimentally-verified numerical models that provide in-depth insight into the design and operation I-PVD tools.Practicing process engineers, research and development scientists, and students will find that this book's integration of tool design, process development, and fundamental physical models make it an indispensable reference.Key Features:The first comprehensive volume on ionized physical vapor depositionCombines tool design, process development, and fundamental physical understanding to form a complete picture of I-PVDEmphasizes practical applications in the area of IC fabrication and interconnect technologyServes as a guide to select the most appropriate technology for any deposition application*This single source saves time and effort by including comprehensive information at one's finger tips*The integration of tool design, process development, and fundamental physics allows the reader to quickly understand all of the issues important to I-PVD*The numerous practical applications assist the working engineer to select and refine thin film processes
Download or read book Thin Film Processes II written by Werner Kern and published by Elsevier. This book was released on 2012-12-02 with total page 881 pages. Available in PDF, EPUB and Kindle. Book excerpt: This sequel to the 1978 classic, Thin Film Processes, gives a clear, practical exposition of important thin film deposition and etching processes that have not yet been adequately reviewed. It discusses selected processes in tutorial overviews with implementation guide lines and an introduction to the literature. Though edited to stand alone, when taken together, Thin Film Processes II and its predecessor present a thorough grounding in modern thin film techniques. - Provides an all-new sequel to the 1978 classic, Thin Film Processes - Introduces new topics, and several key topics presented in the original volume are updated - Emphasizes practical applications of major thin film deposition and etching processes - Helps readers find the appropriate technology for a particular application
Download or read book Handbook of II VI Semiconductor Based Sensors and Radiation Detectors written by Ghenadii Korotcenkov and published by Springer Nature. This book was released on 2023-04-20 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: Three-volumes book “Handbook of II-VI Semiconductor-Based Sensors and Radiation Detectors” is the first to cover both chemical sensors and biosensors and all types of photodetectors and radiation detectors based on II-VI semiconductors. It contains a comprehensive and detailed analysis of all aspects of the application of II-VI semiconductors in these devices. The first volume "Materials and Technologies" of a three-volume set describes the physical, chemical and electronic properties of II-VI compounds, which give rise to an increased interest in these semiconductors. Technologies that are used in the development of various devices based on II-VI connections, such as material synthesis, deposition, characterization, processing, and device fabrication, are also discussed in detail in this volume. It covers also topics related to synthesis and application of II-VI-based nanoparticles and quantum dots, as well their toxicity, biocompatibility and biofunctionalization.
Download or read book Ionized Physical Vapor Deposition written by and published by Academic Press. This book was released on 1999-10-20 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides the first comprehensive look at a pivotal new technology in integrated circuit fabrication. For some time researchers have sought alternate processes for interconnecting the millions of transistors on each chip because conventional physical vapor deposition can no longer meet the specifications of today's complex integrated circuits. Out of this research, ionized physical vapor deposition has emerged as a premier technology for the deposition of thin metal films that form the dense interconnect wiring on state-of-the-art microprocessors and memory chips. For the first time, the most recent developments in thin film deposition using ionized physical vapor deposition (I-PVD) are presented in a single coherent source. Readers will find detailed descriptions of relevant plasma source technology, specific deposition systems, and process recipes. The tools and processes covered include DC hollow cathode magnetrons, RF inductively coupled plasmas, and microwave plasmas that are used for depositing technologically important materials such as copper, tantalum, titanium, TiN, and aluminum. In addition, this volume describes the important physical processes that occur in I-PVD in a simple and concise way. The physical descriptions are followed by experimentally-verified numerical models that provide in-depth insight into the design and operation I-PVD tools. Practicing process engineers, research and development scientists, and students will find that this book's integration of tool design, process development, and fundamental physical models make it an indispensable reference. Key Features: The first comprehensive volume on ionized physical vapor deposition Combines tool design, process development, and fundamental physical understanding to form a complete picture of I-PVD Emphasizes practical applications in the area of IC fabrication and interconnect technology Serves as a guide to select the most appropriate technology for any deposition application *This single source saves time and effort by including comprehensive information at one's finger tips *The integration of tool design, process development, and fundamental physics allows the reader to quickly understand all of the issues important to I-PVD *The numerous practical applications assist the working engineer to select and refine thin film processes
Download or read book Chemical Vapor Deposition CVD of Thin Films for Electronic Materials written by Yoshihide Senzaki and published by . This book was released on 1993 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Physics of Thin Film Deposition Processes for Micro and Nano Technologies written by Y. Pauleau and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: An up-to-date collection of tutorial papers on the latest advances in the deposition and growth of thin films for micro and nano technologies. The emphasis is on fundamental aspects, principles and applications of deposition techniques used for the fabrication of micro and nano devices. The deposition of thin films is described, emphasising the gas phase and surface chemistry and its effects on the growth rates and properties of films. Gas-phase phenomena, surface chemistry, growth mechanisms and the modelling of deposition processes are thoroughly described and discussed to provide a clear understanding of the growth of thin films and microstructures via thermally activated, laser induced, photon assisted, ion beam assisted, and plasma enhanced vapour deposition processes. A handbook for engineers and scientists and an introduction for students of microelectronics.
Download or read book Nanomaterials via Single Source Precursors written by Allen W. Apblett and published by Elsevier. This book was released on 2022-02-19 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanomaterials via Single-Source Precursors: Synthesis, Processing and Applications presents recent results and overviews of synthesis, processing, characterization and applications of advanced materials for energy, electronics, biomedicine, sensors and aerospace. A variety of processing methods (vapor, liquid and solid-state) are covered, along with materials, including metals, oxides, semiconductor, sulfides, selenides, nitrides, and carbon-based materials. Production of quantum dots, nanoparticles, thin films and composites are described by a collection of international experts. Given the ability to customize the phase, morphology, and properties of target materials, this "rational approach to synthesis and processing is a disruptive technology for electronic, energy, structural and biomedical (nano)materials and devices. The use of single-source chemical precursors for materials processing technology allows for intimate elemental mixing and hence production of complex materials at temperatures well below traditional physical methods and those involving direct combination of elements. The use of lower temperatures enables thin-film deposition on lightweight polymer substrates and reduces damage to complex devices structures such as used in power, electronics and sensors. - Discusses new approaches to synthesis or single-source precursors (SSPs) and the concept of rational design of materials - Includes materials processing of SSPs in the design of new materials and novel devices - Provides comprehensive coverage of the subject (materials science and chemistry) as related to SSPs and the range of potential applications
Download or read book Fundamental Gas phase and Surface Chemistry of Vapor phase Deposition II and Process Control Diagnostics and Modeling in Semiconductor Manufacturing IV written by Electrochemical Society. High Temperature Materials Division and published by The Electrochemical Society. This book was released on 2001 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Catalytic Chemical Vapor Deposition written by Hideki Matsumura and published by John Wiley & Sons. This book was released on 2019-02-15 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authoritative reference on catalytic chemical vapor deposition, written by the inventor of the technology. This comprehensive book covers a wide scope of Cat-CVD and related technologies from the fundamentals to the many applications, including the design of a Cat-CVD apparatus. Featuring contributions from four senior leaders in the field, including the father of catalytic chemical vapor deposition, it also introduces some of the techniques used in the observation of Cat-CVD related phenomena so that readers can understand the concepts of such techniques. Catalytic Chemical Vapor Deposition: Technology and Applications of Cat-CVD begins by reviewing the analytical tools for elucidating the chemical reactions in Cat-CVD, such as laser-induced fluorescence and deep ultra-violet absorption, and explains in detail the underlying physics and chemistry of the Cat-CVD technology. Subsequently it provides an overview of the synthesis and properties of Cat-CVD-prepared inorganic and organic thin films. The last parts of this unique book are devoted to the design and operation of Cat-CVD apparatuses and the applications. Provides coherent coverage of the fundamentals and applications of catalytic chemical vapor deposition (Cat-CVD) Assembles in one place the state of the art of this rapidly growing field, allowing new researchers to get an overview that is difficult to obtain solely from journal articles Presents comparisons of different Cat-CVD methods which are usually not found in research papers Bridges academic and industrial research, showing how CVD can be scaled up from the lab to large-scale industrial utilization in the high-tech industry. Catalytic Chemical Vapor Deposition: Technology and Applications is an excellent one-stop resource for researchers and engineers working on or entering the field of Cat-CVD, Hot-Wire CVD, iCVD, and related technologies.
Download or read book Metalorganic Vapor Phase Epitaxy MOVPE written by Stuart Irvine and published by John Wiley & Sons. This book was released on 2019-10-07 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Systematically discusses the growth method, material properties, and applications for key semiconductor materials MOVPE is a chemical vapor deposition technique that produces single or polycrystalline thin films. As one of the key epitaxial growth technologies, it produces layers that form the basis of many optoelectronic components including mobile phone components (GaAs), semiconductor lasers and LEDs (III-Vs, nitrides), optical communications (oxides), infrared detectors, photovoltaics (II-IV materials), etc. Featuring contributions by an international group of academics and industrialists, this book looks at the fundamentals of MOVPE and the key areas of equipment/safety, precursor chemicals, and growth monitoring. It covers the most important materials from III-V and II-VI compounds to quantum dots and nanowires, including sulfides and selenides and oxides/ceramics. Sections in every chapter of Metalorganic Vapor Phase Epitaxy (MOVPE): Growth, Materials Properties and Applications cover the growth of the particular materials system, the properties of the resultant material, and its applications. The book offers information on arsenides, phosphides, and antimonides; nitrides; lattice-mismatched growth; CdTe, MCT (mercury cadmium telluride); ZnO and related materials; equipment and safety; and more. It also offers a chapter that looks at the future of the technique. Covers, in order, the growth method, material properties, and applications for each material Includes chapters on the fundamentals of MOVPE and the key areas of equipment/safety, precursor chemicals, and growth monitoring Looks at important materials such as III-V and II-VI compounds, quantum dots, and nanowires Provides topical and wide-ranging coverage from well-known authors in the field Part of the Materials for Electronic and Optoelectronic Applications series Metalorganic Vapor Phase Epitaxy (MOVPE): Growth, Materials Properties and Applications is an excellent book for graduate students, researchers in academia and industry, as well as specialist courses at undergraduate/postgraduate level in the area of epitaxial growth (MOVPE/ MOCVD/ MBE).
Download or read book Modeling of Chemical Vapor Deposition of Tungsten Films written by Chris R. Kleijn and published by Birkhäuser. This book was released on 2013-11-11 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductor equipment modeling has in recent years become a field of great interest, because it offers the potential to support development and optimization of manufacturing equipment and hence reduce the cost and improve the quality of the reactors. This book is the result of two parallel lines of research dealing with the same subject - Modeling of Tungsten CVD processes -, which were per formed independently under very different boundary conditions. On the one side, Chris Kleijn, working in an academic research environment, was able to go deep enough into the subject to laya solid foundation and prove the validity of all the assumptions made in his work. On the other side, Christoph Werner, working in the context of an industrial research lab, was able to closely interact with manufacturing and development engineers in a modern submicron semiconductor processing line. Because of these different approaches, the informal collaboration during the course of the projects proved to be extremely helpful to both sides, even though - or perhaps because - different computer codes, different CVD reactors and also slightly different models were used. In spite of the inconsistencies which might arise from this double approach, we feel that the presentation of both sets of results in one book will be very useful for people working in similar projects.
Download or read book Deposition of Semiconductor Thin Films Via MOCVD of Single source Precursors written by John Paul Waters and published by . This book was released on 2004 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Vapour Deposition written by Anthony C. Jones and published by Royal Society of Chemistry. This book was released on 2009 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The book is one of the most comprehensive overviews ever written on the key aspects of chemical vapour deposition processes and it is more comprehensive, technically detailed and up-to-date than other books on CVD. The contributing authors are all practising CVD technologists and are leading international experts in the field of CVD. It presents a logical and progressive overview of the various aspects of CVD processes. Basic concepts, such as the various types of CVD processes, the design of CVD reactors, reaction modelling and CVD precursor chemistry are covered in the first few"--Jacket
Download or read book Handbook of Thin Film Deposition written by Krishna Seshan and published by William Andrew. This book was released on 2012-12-06 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Thin Film Deposition is a comprehensive reference focusing on thin film technologies and applications used in the semiconductor industry and the closely related areas of thin film deposition, thin film micro properties, photovoltaic solar energy applications, new materials for memory applications and methods for thin film optical processes. In a major restructuring, this edition of the handbook lays the foundations with an up-to-date treatment of lithography, contamination and yield management, and reliability of thin films. The established physical and chemical deposition processes and technologies are then covered, the last section of the book being devoted to more recent technological developments such as microelectromechanical systems, photovoltaic applications, digital cameras, CCD arrays, and optical thin films. - A practical survey of thin film technologies aimed at engineers and managers involved in all stages of the process: design, fabrication, quality assurance and applications - Covers core processes and applications in the semiconductor industry and new developments in the photovoltaic and optical thin film industries - The new edition takes covers the transition taking place in the semiconductor world from Al/SiO2 to copper interconnects with low-k dielectrics - Written by acknowledged industry experts from key companies in the semiconductor industry including Intel and IBM - Foreword by Gordon E. Moore, co-founder of Intel and formulator of the renowned 'Moore's Law' relating to the technology development cycle in the semiconductor industry
Download or read book Atomic Layer Deposition for Semiconductors written by Cheol Seong Hwang and published by Springer Science & Business Media. This book was released on 2013-10-18 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering thorough coverage of atomic layer deposition (ALD), this book moves from basic chemistry of ALD and modeling of processes to examine ALD in memory, logic devices and machines. Reviews history, operating principles and ALD processes for each device.
