Download or read book Significant New Use Rules Multi Walled Carbon Nanotubes and Single Walled Carbon Nanotubes Us Environmental Protection Agency Regulation Epa 2018 Edition written by Law Library and published by Createspace Independent Publishing Platform. This book was released on 2018-09-02 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: Significant New Use Rules - Multi-Walled Carbon Nanotubes and Single-Walled Carbon Nanotubes (US Environmental Protection Agency Regulation) (EPA) (2018 Edition) The Law Library presents the complete text of the Significant New Use Rules - Multi-Walled Carbon Nanotubes and Single-Walled Carbon Nanotubes (US Environmental Protection Agency Regulation) (EPA) (2018 Edition). Updated as of May 29, 2018 EPA is issuing significant new use rules (SNURs) under section 5(a)(2) of the Toxic Substances Control Act (TSCA) for two chemical substances which were the subject of Premanufacture Notices (PMNs). The two chemical substances are identified generically as multi-walled carbon nanotubes (MWCNT) (PMN P-08-177) and single-walled carbon nanotubes (SWCNT) (PMN P-08-328). This action requires persons who intend to manufacture, import, or process either of these two chemical substances for a use that is designated as a significant new use by this final rule to notify EPA at least 90 days before commencing that activity. EPA believes that this action is necessary because these chemical substances may be hazardous to human health and the environment. The required notification would provide EPA with the opportunity to evaluate the intended use and, if necessary, to prohibit or limit that activity before it occurs. This book contains: - The complete text of the Significant New Use Rules - Multi-Walled Carbon Nanotubes and Single-Walled Carbon Nanotubes (US Environmental Protection Agency Regulation) (EPA) (2018 Edition) - A table of contents with the page number of each section

Download or read book Chemical Substances When Manufactured Or Processed as Nanoscale Materials Tsca Reporting and Recordkeeping Requirements Us Environmental Protection Agency Regulation Epa 2018 Edition written by The Law The Law Library and published by Createspace Independent Publishing Platform. This book was released on 2018-07-19 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Substances When Manufactured or Processed as Nanoscale Materials - TSCA Reporting and Recordkeeping Requirements (US Environmental Protection Agency Regulation) (EPA) (2018 Edition) The Law Library presents the complete text of the Chemical Substances When Manufactured or Processed as Nanoscale Materials - TSCA Reporting and Recordkeeping Requirements (US Environmental Protection Agency Regulation) (EPA) (2018 Edition). Updated as of May 29, 2018 EPA is establishing reporting and recordkeeping requirements for certain chemical substances when they are manufactured or processed at the nanoscale as described in this rule. Specifically, EPA is requiring persons that manufacture (defined by statute to include import) or process, or intend to manufacture or process these chemical substances to electronically report to EPA certain information, which includes insofar as known to or reasonably ascertainable by the person making the report, the specific chemical identity, production volume, methods of manufacture and processing, exposure and release information, and existing information concerning environmental and health effects. This rule involves one-time reporting for existing discrete forms of certain nanoscale materials, and a standing one-time reporting requirement for new discrete forms of certain nanoscale materials before those new forms are manufactured or processed. This book contains: - The complete text of the Chemical Substances When Manufactured or Processed as Nanoscale Materials - TSCA Reporting and Recordkeeping Requirements (US Environmental Protection Agency Regulation) (EPA) (2018 Edition) - A table of contents with the page number of each section

Download or read book Multi Walled Carbon Nanotubes written by Simone Morais and published by MDPI. This book was released on 2019-07-15 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since their discovery, multi-walled carbon nanotubes (MWCNTs) have received tremendous attention due to their unique electrical, optical, physical, chemical, and mechanical properties. Remarkable advances have been made in the synthesis, purification, structural characterization, functionalization, and application of MWCNTs. Their particular characteristics make them well suited for a plethora of applications in a number of fields, namely nanoelectronics, nanofluids, energy management, (electro)catalysis, materials science, construction of (bio)sensors based on different detection schemes, multifunctional nanoprobes for biomedical imaging, and sorbents for sample preparation or removal of contaminants from wastewater. They are also useful as anti-bacterial agents, drug delivery nanocarriers, etc. The current relevant application areas are countless. This Special Issue presents original research and review articles that address advances, trends, challenges, and future perspectives regarding synthetic routes, structural features, properties, behaviors, and industrial or scientific applications of MWCNTs in established and emerging areas.

Download or read book GB T 24491 2009 Translated English of Chinese Standard GB T 24491 2009 GBT24491 2009 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2023-06-18 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the terms and definitions, classification, technical requirements, test methods, inspection rules, packaging, marks as well as quality certificates, storage and transportation, safety precautions for multi-walled carbon nanotubes. This Standard applies to multi-walled carbon nanotube powder products.

Download or read book Carbon Nanotube Based Composites written by Antonio Pantano and published by Smithers Rapra. This book was released on 2012-09-28 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes (CNTs) have amazing properties and a key way to take advantage of this is by incorporating nanotubes into a matrix to build composite materials. The best candidates for this task are undoubtedly polymers. Almost every characteristic of a polymer can be significantly enhanced by adding carbon nanotubes and as a result, new potential applications of carbon nanotube enhanced polymer composites are discovered every day. However, before carbon nanotube enhanced polymer composites become commonplace there are some tough challenges that need to be overcome. This book reviews the status of worldwide research in both single-walled and multi-walled carbon nanotube based composites. It serves as a practical guide on carbon nanotube based composites and a reference to students and researchers from the academia and industry.

Download or read book Carbon Nanotubes written by Siva Yellampalli and published by BoD – Books on Demand. This book was released on 2011-07-20 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes are one of the most intriguing new materials with extraordinary properties being discovered in the last decade. The unique structure of carbon nanotubes provides nanotubes with extraordinary mechanical and electrical properties. The outstanding properties that these materials possess have opened new interesting researches areas in nanoscience and nanotechnology. Although nanotubes are very promising in a wide variety of fields, application of individual nanotubes for large scale production has been limited. The main roadblocks, which hinder its use, are limited understanding of its synthesis and electrical properties which lead to difficulty in structure control, existence of impurities, and poor processability. This book makes an attempt to provide indepth study and analysis of various synthesis methods, processing techniques and characterization of carbon nanotubes that will lead to the increased applications of carbon nanotubes.

Download or read book Carbon Nanotubes written by Mohamed Berber and published by BoD – Books on Demand. This book was released on 2016-07-20 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows the recent advances of the applications of carbon nanotubes (CNTs), in particular, the polymer functionalized carbon nanotubes. It also includes a comprehensive description of carbon nanotubes' preparation, properties, and characterization. Therefore, we have attempted to provide detailed information about the polymer-carbon nanotube composites. With regard to the unique structure and properties of carbon nanotubes, a series of important findings have been reported. The unique properties of carbon nanotubes, including thermal, mechanical, and electrical properties, after polymer functionalization have been documented in detail. This book comprises 18 chapters. The chapters include different applications of polymer functionalization CNTs, e.g. photovoltaic, biomedical, drug delivery, gene delivery, stem cell therapy, thermal therapy, biological detection and imaging, electroanalytical, energy, supercapacitor, and gas sensor applications.

Download or read book U S Environmental Protection Agency written by United States Environmental Protection Agency (EPA) and published by Createspace Independent Publishing Platform. This book was released on 2018-07-08 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: U.S. Environmental Protection Agency : External Review Draft ; Nanotechnology White Paper

Download or read book Characterization of Carbon Nanotube Based Composites under Consideration of Defects written by Moones Rahmandoust and published by Springer. This book was released on 2015-10-14 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the characterization methods involved with carbon nanotubes and carbon nanotube-based composites, with a more detailed look at computational mechanics approaches, namely the finite element method. Special emphasis is placed on studies that consider the extent to which imperfections in the structure of the nanomaterials affect their mechanical properties. These defects may include random distribution of fibers in the composite structure, as well as atom vacancies, perturbation and doping in the structure of individual carbon nanotubes.

Download or read book Carbon Nanotubes written by Andy Nieto and published by CRC Press. This book was released on 2021-05-18 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: This discovery of carbon nanotubes (CNT) three decades ago ushered in the technological era of nanotechnology. Among the most widely studied areas of CNT research is their use as structural reinforcements in composites. This book describes the development of CNT reinforced metal matrix composites (CNT-MMCs) over the last two decades. The field of CNT-MMCs is abundant in fundamental science, rich in engineering challenges and innovations and ripe for technological maturation and commercialization. The authors have sought to present the current state of the-art in CNT-MMC technology from their synthesis to their myriad potential end-use applications. Specifically, topics explored include: • Advantages, limitations, and evolution of processing techniques used to synthesize and fabricate CNT-MMCs • Emphasizes dispersion techniques of CNTs in metallic systems, a key challenge to the successful and widespread implementation of CNT-MMCs. Methods for quantification and improved control of CNT distributions are presented • Methods for quantification and improved control of CNT distributions are presented • Characterization techniques uniquely suited for charactering these nanoscale materials and their many chemical and physical interactions with the metal matrix, including real-time in-situ characterization of deformation mechanisms • Electron microscope images from premier studies enrich discussions on micro-mechanical modeling, interfacial design, mechanical behavior, and functional properties • A chapter is dedicated to the emergence of dual reinforcement composites that seek to enhance the efficacy of CNTs and lead to material properties by design This book highlights seminal findings in CNT-MMC research and includes several tables listing processing methods, associated CNT states, and resulting properties in order to aid the next generation of researchers in advancing the science and engineering of CNT-MMCs. In addition, a survey of the patent literature is presented in order to shed light on what the first wave of CNT-MMC commercialization may look like and the challenges that will have to be overcome, both technologically and commercially.

Download or read book Carbon Nanotubes written by Mohammed Rahman and published by BoD – Books on Demand. This book was released on 2018-04-26 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book Carbon Nanotubes - Recent Progress contains a number of recent researches on synthesis, growth, characterization, development, and potential applications on carbon materials especially CNTs in nanoscale. It is a promising novel research from top to bottom that has received a lot of interest in the last few decades. It covers the advanced topics on the physical, chemical, and potential applications of CNTs. Here, the interesting reports on cutting-edge science and technology related to synthesis, morphology, control, hybridization, and prospective applications of CNTs are concluded. This potentially unique work offers various approaches on the R

Download or read book Carbon Nanotubes written by Arvind Agarwal and published by CRC Press. This book was released on 2018-09-03 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the Foreword, written by legendary nano pioneer M. Meyyappan, Chief Scientist for Exploration Technology NASA Ames Research Center, Moffett Field, California, USA: "...there is critical need for a book to summarize the status of the field but more importantly to lay out the principles behind the technology. This is what Professor Arvind Agarwal and his co-workers ... have done here." Carbon Nanotubes: Reinforced Metal Matrix Composites reflects the authors’ desire to share the benefits of nanotechnology with the masses by developing metal matrix carbon nanotube (MM-CNT) composites for large-scale applications. Multiwall carbon nanotubes can now be produced on a large scale and at a significantly reduced cost. The book explores potential applications and applies the author’s own research to highlight critical developmental issues for different MM-CNT composites—and then outline novel solutions. With this problem-solving approach, the book explores: Advantages, limitations, and the evolution of processing techniques used for MM-CNT composites Characterization techniques unique to the study of MM-CNT composites—and the limitations of these methods Existing research on different MM-CNT composites, presented in useful tables that include composition, processing method, quality of CNT dispersion, and properties The micro-mechanical strengthening that results from adding CNT The applicability of micro-mechanics models in MM-CNT composites Significance of chemical stability for carbon nanotubes in the metal matrix as a function of processing, and its impact on CNT/metal interface and mechanical properties Computational studies that have not been sufficiently covered although they are essential to research and development The critical issue of CNT dispersion in the metal matrix, as well as a unique way to quantify CNT distribution and subsequently improve control of the processing parameters for obtaining improved properties Carbon Nanotubes: Reinforced Metal Matrix Composites paints a vivid picture of scientific and application achievements in this field. Exploring the mechanisms through which CNTs are enhancing the properties of different metal-based composites, the authors provide a roadmap to help researchers develop MM-CNT composites and choose potential materials for use in emerging areas of technology.

Download or read book Carbon Based Material for Environmental Protection and Remediation written by Mattia Bartoli and published by BoD – Books on Demand. This book was released on 2020-08-19 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon-Based Material for Environmental Protection and Remediation presents an overview of carbon-based technologies and processes, and examines their usefulness and efficiency for environmental preservation and remediation. Chapters cover topics ranging from pollutants removal to new processes in materials science. Written for interested readers with strong scientific and technological backgrounds, this book will appeal to scientific advisors at private companies, academics, and graduate students.

Download or read book A Matter of Size written by National Research Council and published by National Academies Press. This book was released on 2006-11-30 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: The National Nanotechnology Initiative (NNI) was created in 2000 to focus and coordinate the nanoscience and nanotechnology research and development (R&D) activities being funded by several federal agencies. The purpose of the NNI is to marshal these research activities in order to accelerate responsible development and deployment of nanotechnology for economic benefit and national security. To take stock of the progress of the NNI, Congress, in P. L. 108-153, the 21st Century Nanotechnology Research and Development Act, directed the National Research Council to carry out a review of the program every three years. This report presents the results of the first of those reviews, which addresses the economic impact of nanotechnology developments and provides a benchmark of U.S. R&D efforts relative to those undertaken by foreign competitors. In addition, the report offers an assessment of the current status of responsible development of nanotechnology and comments on the feasibility of molecular self-assembly.

Download or read book Recent Developments in Modeling and Applications of Carbon Nanotubes written by Q. Wang and published by . This book was released on 2009-01-01 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes are macromolecules of carbon in a periodic hexagonal arrangement with a cylindrical shell shape. Carbon nanotubes have been subjected to extensive research, with subsequent predictions of extremely high strength and exceptional electronic and thermal properties. They also hold substantial promise as fibers in composites and other devices for the development of superconductive devices for micro-electro-mechanical and nano-electro-mechanical system applications. It is expected that the material has great potential in biological, medical, energy storage, sensor, and other applications. It has been broadly recognized that atomic modeling of carbon nanotube is a powerful tool for analysis of carbon nanotube. Due to massive computations involved, the atomic modeling is limited to systems with a small number of molecules and atoms. On the other hand, attempts at applying continuum mechanics models to better investigate the analysis of carbon nanotube with large sizes have been initiated. However, continuum models are unable to adequately capture the atomic structures of carbon nanotube, and the applicability of the models needs to be justified. Recently, developments of multiscale methods have been proposed to the analysis of carbon nanotube. This book is dedicated to the publication of recent developments in modeling of carbon nanotube via atomic modeling, continuum modeling and multiscale methods for predictions of mechanical, electronic, and thermal properties of carbon nanotube. A wide range of fundamentally theoretical, computational topics on modeling and applications of carbon nanotube will be covered in the book. In addition, applications of carbon nanotubes as nano-devices in atomic and molecular transportations and bistable devices in switching or memory elements in signal processing and communications are also reported. It is with great pleasure that we present this book that covers a very wide and varied range of subject areas in modeling and applications of carbon nanotubes. The first chapter employs molecular dynamics simulations to show macroscopic flows of atomic and molecular hydrogen, helium, and a mixture of both gases both inside and outside a carbon nanotube. In particular, the simulations show a nanoseparation effect of the two gases. The new results in the chapter show the mass selectivity of the nanopumping effect can be used to develop a highly selective filter for various gases. The second chapter introduces a fine continuum model that is developed by virtue of the higher-order continuum theory. Moreover, a mesh-free computational framework is developed to implement the numerical simulation of single- walled carbon nanotubes. The rationality of the higher-order continuum model and the efficiency of mesh-free method are illustrated and discussed in the chapter. The study on the mechanics of buckled single-walled and multiwalled carbon nanotubes, carbon nanotube bundles and coupling effect between adjacent carbon nanotubes is reported in chapter three. Simple expressions of the buckle wavelength, amplitude and critical strain for buckling are given analytically, which show good agreement with experiments. Chapter 4 investigate the applicability of elastic shell model in analysis of graphene and carbon nanotubes. The author reports that the elasticity of graphene should be modeled as a shell composed of 2-dimensional (2D) isotropic materials with proper parameters rather than conventional 3D materials based on calculations by density functional theory. In addition, the elasticity of single-walled carbon nanotube with relative large radius can also be modeled as a shell composed of 2D isotropic materials, whereas the elasticity of single-walled carbon nanotubes with relative small radius should be modeled as a more complicated shell with seven elastic constants rather than the orthotropic thin shell. Mechanical integrity of carbon nanotubes is summarized in chapter 5. Young s modulus for the resistance to the infinitesimal deformation and ultimate strength to the finite deformation are tabled, which have been obtained by experiments, molecular dynamics simulations, and ab-initio calculations. Also the recent continuous modeling of carbon nanotubes is sorted out in tracing its advancement in the chapter. Chapter 6 presents an overview of studies on the wave propagation and the vibrational properties in carbon nanotubes by computational modeling and simulation. The models include the atomic-based continuum model, the Euler-beam model, the Timoshenko beam model, and the three-dimensional elastic shell model. Chapter seven reports the investigations of torsional buckling of both single-walled and double-walled carbon nanotubes. In the study of doubled-walled carbon nanotubes via molecular dynamics, a newly revealed buckling mode with one or three thin local rims on the outer tube is discovered while the inner tube shows a helically aligned buckling mode in three dimensions. The distinct buckling modes of the two tubes imply the inapplicability of continuum mechanics modeling in which it is postulated that the buckling modes of the constituent tubes have the same shape. The mechanical properties of single walled carbon nanotubes under both tensile and torsion are investigated using classical molecular dynamics simulations in chapter 8, based on reactive empirical bond-order potential. Based on the predicted mechanical properties, it is predicted that nanotubes may represent new candidates for novel porous, flexible and high strength and tough materials, e.g. ideal as scaffolds in the regenerative medicine. Bistable devices have been widely used as switching or memory elements in signal processing and communications. The bistablity is generally realized electrically or optically. Due to their small size and unique mechanical properties, carbon nanotubes have been proposed to form bistable devices mechanically. The chapter 9 reviews the recent advances of mechanical bistable devices of carbon nanotubes. In the final chapter, the authors have discussed a theoretical model based on kinetic concept of fracture of solids and molecular mechanics simulations for studying the time-dependent behavior of single-walled carbon nanotubes. The major advantage of this model is that the problem of real-time molecular level simulation is circumvented. Compared with recently published data on creep rupture of SWCNT ropes, it is seen that the predictions by the present model is quite reasonable, thus setting up a framework for modeling the time-dependent behavior of carbon nanotubes and their composites. We would like to extend our sincere thanks to the authors for their contributions, especially their precious time and efforts invested in the book. We also would like to thank Transworld Research Network Publishers for the opportunity to publish the book to address very important and challenging issues. The support and love from our families are deeply appreciated.

Download or read book Defects and Diffusion in Carbon Nanotubes written by D.J. Fisher and published by Trans Tech Publications Ltd. This book was released on 2014-08-04 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes are one of the newest materials to be discovered, being barely 20 years old. They are also the most promising one, with one particular sample of multi-walled nanotube attaining a tensile strength of 63GPa, and with carbon nanotubes in general having a specific strength of up to 48000kNm/kg: effectively a direct exploitation of the covalent sp2 bonding between carbon atoms. Plastic deformation begins at about 5% strain. The nanotubes can be produced in lengths of up to 550mm, and thicknesses as small as 4.3Å; making them perfect reinforcement fibres for composites. They also have many other properties which may be useful in electronics, gas storage , etc. The present compilation focuses on the various characteristic types of defect which are found in carbon nanotubes, plus the relatively limited number of diffusion studies which have been performed. The 418 entries cover the period from 1994 to 2014.

Download or read book Soil pollution a hidden reality written by Food and Agriculture Organization of the United Nations and published by Food & Agriculture Org.. This book was released on 2018-04-30 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document presents key messages and the state-of-the-art of soil pollution, its implications on food safety and human health. It aims to set the basis for further discussion during the forthcoming Global Symposium on Soil Pollution (GSOP18), to be held at FAO HQ from May 2nd to 4th 2018. The publication has been reviewed by the Intergovernmental Technical Panel on Soil (ITPS) and contributing authors. It addresses scientific evidences on soil pollution and highlights the need to assess the extent of soil pollution globally in order to achieve food safety and sustainable development. This is linked to FAO’s strategic objectives, especially SO1, SO2, SO4 and SO5 because of the crucial role of soils to ensure effective nutrient cycling to produce nutritious and safe food, reduce atmospheric CO2 and N2O concentrations and thus mitigate climate change, develop sustainable soil management practices that enhance agricultural resilience to extreme climate events by reducing soil degradation processes. This document will be a reference material for those interested in learning more about sources and effects of soil pollution.