Download or read book Shear Deformable Beams and Plates written by C.M. Wang and published by Elsevier. This book was released on 2000-07-19 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most books on the theory and analysis of beams and plates deal with the classical (Euler-Bernoulli/Kirchoff) theories but few include shear deformation theories in detail. The classical beam/plate theory is not adequate in providing accurate bending, buckling, and vibration results when the thickness-to-length ratio of the beam/plate is relatively large. This is because the effect of transverse shear strains, neglected in the classical theory, becomes significant in deep beams and thick plates. This book illustrates how shear deformation theories provide accurate solutions compared to the classical theory. Equations governing shear deformation theories are typically more complicated than those of the classical theory. Hence it is desirable to have exact relationships between solutions of the classical theory and shear deformation theories so that whenever classical theory solutions are available, the corresponding solutions of shear deformation theories can be readily obtained. Such relationships not only furnish benchmark solutions of shear deformation theories but also provide insight into the significance of shear deformation on the response. The relationships for beams and plates have been developed by many authors over the last several years. The goal of this monograph is to bring together these relationships for beams and plates in a single volume. The book is divided into two parts. Following the introduction, Part 1 consists of Chapters 2 to 5 dealing with beams, and Part 2 consists of Chapters 6 to 13 covering plates. Problems are included at the end of each chapter to use, extend, and develop new relationships.
Download or read book Advances in the Mechanics of Plates and Shells written by D. Durban and published by Springer Science & Business Media. This book was released on 2001-11-30 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: The optimal control of flexible structures is an active area of research. The main body of work in this area is concerned with the control of time-dependent displacements and stresses, and assumes linear elastic conditions, namely linear elastic material behavior and small defor- tion. See, e. g. , [1]–[3], the collections of papers [4, 5], and references therein. On the other hand, in the present paper we consider the static optimal control of a structure made of a nonlinear elastic material and und- going large deformation. An important application is the suppression of static or quasi-static elastic deformation in flexible space structures such as parts of satellites by the use of control loads [6]. Solar rad- tion and radiation from other sources induce a temperature field in the structure, which in turn generates an elastic displacement field. The displacements must usually satisfy certain limitations dictated by the allowed working conditions of various orientation-sensitive instruments and antennas in the space vehicle. For example, a parabolic reflector may cease to be effective when undergoing large deflection. The elastic deformation can be reduced by use of control loads, which may be imp- mented via mechanically-based actuators or more modern piezoelectric devices. When the structure under consideration is made of a rubb- like material and is undergoing large deformation, nonlinear material and geometric effects must be taken into account in the analysis.
Download or read book Theories and Analyses of Beams and Axisymmetric Circular Plates written by J N Reddy and published by CRC Press. This book was released on 2022-06-30 with total page 819 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive textbook compiles cutting-edge research on beams and circular plates, covering theories, analytical solutions, and numerical solutions of interest to students, researchers, and engineers working in industry. Detailing both classical and shear deformation theories, the book provides a complete study of beam and plate theories, their analytical (exact) solutions, variational solutions, and numerical solutions using the finite element method. Beams and plates are some of the most common structural elements used in many engineering structures. The book details both classical and advanced (i.e., shear deformation) theories, scaling in complexity to aid the reader in self-study, or to correspond with a taught course. It covers topics including equations of elasticity, equations of motion of the classical and first-order shear deformation theories, and analytical solutions for bending, buckling, and natural vibration. Additionally, it details static as well as transient response based on exact, the Navier, and variational solution approaches for beams and axisymmetric circular plates, and has dedicated chapters on linear and nonlinear finite element analysis of beams and circular plates. Theories and Analyses of Beams and Axisymmetric Circular Plates will be of interest to aerospace, civil, materials, and mechanical engineers, alongside students and researchers in solid and structural mechanics.
Download or read book Handbook on Timoshenko Ehrenfest Beam and Uflyand Mindlin Plate Theories written by Isaac Elishakoff and published by . This book was released on 2019 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The refined theory of beams, which takes into account both rotary inertia and shear deformation, was developed jointly by Timoshenko and Ehrenfest in the years 1911-1912. In over a century since the theory was first articulated, tens of thousands of studies have been performed utilizing this theory in various contexts. Likewise, the generalization of the Timoshenko-Ehrenfest beam theory to plates was given by Uflyand and Mindlin in the years 1948-1951. The importance of these theories stems from the fact that beams and plates are indispensable, and are often occurring elements of every civil, mechanical, ocean, and aerospace structure. Despite a long history and many papers, there is not a single book that summarizes these two celebrated theories. This book is dedicated to closing the existing gap within the literature. It also deals extensively with several controversial topics, namely those of priority, the so-called "second spectrum" shear coefficient, and other issues, and shows vividly that the above beam and plate theories are unnecessarily overcomplicated. In the spirit of Einstein's dictum, "Everything should be made as simple as possible but not simpler," this book works to clarify both the Timoshenko-Ehrenfest beam and Uflyand-Mindlin plate theories, and seeks to articulate everything in the simplest possible language, including their numerous applications. This book is addressed to graduate students, practicing engineers, researchers in their early career, and active scientists who may want to have a different look at the above theories, as well as readers at all levels of their academic or scientific career who want to know the history of the subject. The Timoshenko-Ehrenfest Beam and Uflyand-Mindlin Plate Theories are the key reference works in the study of stocky beams and thick plates that should be given their due and remain important for generations to come, since classical Bernoulli-Euler beam and Kirchhoff-Love theories are applicable for slender beams and thin plates, respectively."--
Download or read book Handbook On Timoshenko ehrenfest Beam And Uflyand Mindlin Plate Theories written by Isaac E Elishakoff and published by World Scientific. This book was released on 2019-10-29 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: The refined theory of beams, which takes into account both rotary inertia and shear deformation, was developed jointly by Timoshenko and Ehrenfest in the years 1911-1912. In over a century since the theory was first articulated, tens of thousands of studies have been performed utilizing this theory in various contexts. Likewise, the generalization of the Timoshenko-Ehrenfest beam theory to plates was given by Uflyand and Mindlin in the years 1948-1951.The importance of these theories stems from the fact that beams and plates are indispensable, and are often occurring elements of every civil, mechanical, ocean, and aerospace structure.Despite a long history and many papers, there is not a single book that summarizes these two celebrated theories. This book is dedicated to closing the existing gap within the literature. It also deals extensively with several controversial topics, namely those of priority, the so-called 'second spectrum' shear coefficient, and other issues, and shows vividly that the above beam and plate theories are unnecessarily overcomplicated.In the spirit of Einstein's dictum, 'Everything should be made as simple as possible but not simpler,' this book works to clarify both the Timoshenko-Ehrenfest beam and Uflyand-Mindlin plate theories, and seeks to articulate everything in the simplest possible language, including their numerous applications.This book is addressed to graduate students, practicing engineers, researchers in their early career, and active scientists who may want to have a different look at the above theories, as well as readers at all levels of their academic or scientific career who want to know the history of the subject. The Timoshenko-Ehrenfest Beam and Uflyand-Mindlin Plate Theories are the key reference works in the study of stocky beams and thick plates that should be given their due and remain important for generations to come, since classical Bernoulli-Euler beam and Kirchhoff-Love theories are applicable for slender beams and thin plates, respectively.Related Link(s)
Download or read book Theories and Analyses of Beams and Axisymmetric Circular Plates written by J N Reddy and published by CRC Press. This book was released on 2022-06-30 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive textbook compiles cutting-edge research on beams and circular plates, covering theories, analytical solutions, and numerical solutions of interest to students, researchers, and engineers working in industry. Detailing both classical and shear deformation theories, the book provides a complete study of beam and plate theories, their analytical (exact) solutions, variational solutions, and numerical solutions using the finite element method. Beams and plates are some of the most common structural elements used in many engineering structures. The book details both classical and advanced (i.e., shear deformation) theories, scaling in complexity to aid the reader in self-study, or to correspond with a taught course. It covers topics including equations of elasticity, equations of motion of the classical and first-order shear deformation theories, and analytical solutions for bending, buckling, and natural vibration. Additionally, it details static as well as transient response based on exact, the Navier, and variational solution approaches for beams and axisymmetric circular plates, and has dedicated chapters on linear and nonlinear finite element analysis of beams and circular plates. Theories and Analyses of Beams and Axisymmetric Circular Plates will be of interest to aerospace, civil, materials, and mechanical engineers, alongside students and researchers in solid and structural mechanics.
Download or read book Recent Approaches in the Theory of Plates and Plate Like Structures written by Holm Altenbach and published by Springer Nature. This book was released on 2022-01-01 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the various approaches in establishment the basic equations of one- and two-dimensional structural elements. In addition, the boundaries of validity of the theories and the estimation of errors in approximate theories are given. Many contributions contain not only new theories, but also new applications, which makes the book interesting for researcher and graduate students.
Download or read book Current Perspectives and New Directions in Mechanics Modelling and Design of Structural Systems written by Alphose Zingoni and published by CRC Press. This book was released on 2022-09-02 with total page 4438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems comprises 330 papers that were presented at the Eighth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2022, Cape Town, South Africa, 5-7 September 2022). The topics featured may be clustered into six broad categories that span the themes of mechanics, modelling and engineering design: (i) mechanics of materials (elasticity, plasticity, porous media, fracture, fatigue, damage, delamination, viscosity, creep, shrinkage, etc); (ii) mechanics of structures (dynamics, vibration, seismic response, soil-structure interaction, fluid-structure interaction, response to blast and impact, response to fire, structural stability, buckling, collapse behaviour); (iii) numerical modelling and experimental testing (numerical methods, simulation techniques, multi-scale modelling, computational modelling, laboratory testing, field testing, experimental measurements); (iv) design in traditional engineering materials (steel, concrete, steel-concrete composite, aluminium, masonry, timber); (v) innovative concepts, sustainable engineering and special structures (nanostructures, adaptive structures, smart structures, composite structures, glass structures, bio-inspired structures, shells, membranes, space structures, lightweight structures, etc); (vi) the engineering process and life-cycle considerations (conceptualisation, planning, analysis, design, optimization, construction, assembly, manufacture, maintenance, monitoring, assessment, repair, strengthening, retrofitting, decommissioning). Two versions of the papers are available: full papers of length 6 pages are included in the e-book, while short papers of length 2 pages, intended to be concise but self-contained summaries of the full papers, are in the printed book. This work will be of interest to civil, structural, mechanical, marine and aerospace engineers, as well as planners and architects.
Download or read book Recent Approaches in the Theory of Plates and Plate Like Structures written by Holm Altenbach and published by Springer. This book was released on 2022-12-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the various approaches in establishment the basic equations of one- and two-dimensional structural elements. In addition, the boundaries of validity of the theories and the estimation of errors in approximate theories are given. Many contributions contain not only new theories, but also new applications, which makes the book interesting for researcher and graduate students.
Download or read book Buckling and Postbuckling of Beams Plates and Shells written by M. Reza Eslami and published by Springer. This book was released on 2017-11-03 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains eight chapters treating the stability of all major areas of the flexural theory. It covers the stability of structures under mechanical and thermal loads and all areas of structural, loading and material types. The structural element may be assumed to be made of a homogeneous/isotropic material, or of a functionally graded material. Structures may experience the bifurcation phenomenon, or they may follow the postbuckling path. This volume explains all these aspects in detail. The book is self-contained and the necessary mathematical concepts and numerical methods are presented in such a way that the reader may easily follow the topics based on these basic tools. It is intended for people working or interested in areas of structural stability under mechanical and/or thermal loads. Some basic knowledge in classical mechanics and theory of elasticity is required.
Download or read book Modern Trends in Structural and Solid Mechanics 2 written by Noel Challamel and published by John Wiley & Sons. This book was released on 2021-06-08 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprised of three separate volumes presents the recent developments and research discoveries in structural and solid mechanics; it is dedicated to Professor Isaac Elishakoff. This second volume is devoted to the vibrations of solid and structural members. Modern Trends in Structural and Solid Mechanics 2 has broad scope, covering topics such as: exact and approximate vibration solutions of rods, beams, membranes, plates and three-dimensional elasticity problems, Bolotins dynamic edge effect, the principles of plate theories in dynamics, nano- and microbeams, nonlinear dynamics of shear extensible beams, the vibration and aeroelastic stability behavior of cellular beams, the dynamic response of elastoplastic softening oscillators, the complex dynamics of hysteretic oscillators, bridging waves, and the three-dimensional propagation of waves. This book is intended for graduate students and researchers in the field of theoretical and applied mechanics.
Download or read book Beam Structures written by Erasmo Carrera and published by John Wiley & Sons. This book was released on 2011-07-28 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: Beam theories are exploited worldwide to analyze civil, mechanical, automotive, and aerospace structures. Many beam approaches have been proposed during the last centuries by eminent scientists such as Euler, Bernoulli, Navier, Timoshenko, Vlasov, etc. Most of these models are problem dependent: they provide reliable results for a given problem, for instance a given section and cannot be applied to a different one. Beam Structures: Classical and Advanced Theories proposes a new original unified approach to beam theory that includes practically all classical and advanced models for beams and which has become established and recognised globally as the most important contribution to the field in the last quarter of a century. The Carrera Unified Formulation (CUF) has hierarchical properties, that is, the error can be reduced by increasing the number of the unknown variables. This formulation is extremely suitable for computer implementations and can deal with most typical engineering challenges. It overcomes the problem of classical formulae that require different formulas for tension, bending, shear and torsion; it can be applied to any beam geometries and loading conditions, reaching a high level of accuracy with low computational cost, and can tackle problems that in most cases are solved by employing plate/shell and 3D formulations. Key features: compares classical and modern approaches to beam theory, including classical well-known results related to Euler-Bernoulli and Timoshenko beam theories pays particular attention to typical applications related to bridge structures, aircraft wings, helicopters and propeller blades provides a number of numerical examples including typical Aerospace and Civil Engineering problems proposes many benchmark assessments to help the reader implement the CUF if they wish to do so accompanied by a companion website hosting dedicated software MUL2 that is used to obtain the numerical solutions in the book, allowing the reader to reproduce the examples given in the book as well as to solve other problems of their own www.mul2.com Researchers of continuum mechanics of solids and structures and structural analysts in industry will find this book extremely insightful. It will also be of great interest to graduate and postgraduate students of mechanical, civil and aerospace engineering.
Download or read book Meshfree Methods written by G.R. Liu and published by CRC Press. This book was released on 2009-10-06 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understand How to Use and Develop Meshfree TechniquesAn Update of a Groundbreaking WorkReflecting the significant advances made in the field since the publication of its predecessor, Meshfree Methods: Moving Beyond the Finite Element Method, Second Edition systematically covers the most widely used meshfree methods. With 70% new material, this edit
Download or read book Ground Improvement and Earth Structures written by Mounir Bouassida and published by Springer. This book was released on 2017-07-11 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains research articles that cover a wide range of topics related to ground improvement and subsurface structures. Selected papers represent the state-of-the-art in the analysis and design of reinforced retaining walls, diaphragm walls and buried pipes. In addition, topics related to ground improvement using vacuum consolidation and deep mixing techniques are also included. This volume is part of the proceedings of the 1st GeoMEast International Congress and Exhibition on Sustainable Civil Infrastructures, Egypt 2017.
Download or read book Partial Differential Equations of Classical Structural Members written by Andreas Öchsner and published by Springer Nature. This book was released on 2019-11-07 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: The derivation and understanding of Partial Differential Equations relies heavily on the fundamental knowledge of the first years of scientific education, i.e., higher mathematics, physics, materials science, applied mechanics, design, and programming skills. Thus, it is a challenging topic for prospective engineers and scientists. This volume provides a compact overview on the classical Partial Differential Equations of structural members in mechanics. It offers a formal way to uniformly describe these equations. All derivations follow a common approach: the three fundamental equations of continuum mechanics, i.e., the kinematics equation, the constitutive equation, and the equilibrium equation, are combined to construct the partial differential equations.
Download or read book Plates written by K. Bhaskar and published by Springer Nature. This book was released on 2021-05-07 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the essentials of developments in the area of plate structures and presents them so that the readers can obtain a quick understanding and overview of the subject. Several theoretical models are employed for their analysis and design starting from the classical thin plate theory to alternatives obtained by incorporation of appropriate complicating effects or by using fundamentally different assumptions. The book includes pedagogical features like end-of-chapter exercises and worked examples to help students in self-learning. The book is extremely useful for the senior undergraduate and postgraduate students of aerospace engineering and mechanical engineering.
Download or read book Beams Plates and Shells written by Lloyd Hamilton Donnell and published by McGraw-Hill Companies. This book was released on 1976 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt:
