Download or read book Cellular Solids written by Lorna J. Gibson and published by Cambridge University Press. This book was released on 1997 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this new edition of their classic work on Cellular Solids, the authors have brought the book completely up to date, including new work on processing of metallic and ceramic foams and on the mechanical, electrical and acoustic properties of cellular solids. Data for commercially available foams are presented on material property charts; two new case studies show how the charts are used for selection of foams in engineering design. Over 150 references appearing in the literature since the publication of the first edition are cited. The text summarises current understanding of the structure and mechanical behaviour of cellular materials, and the ways in which they can be exploited in engineering design. Cellular solids include engineering honeycombs and foams (which can now be made from polymers, metals, ceramics and composites) as well as natural materials, such as wood, cork and cancellous bone.
Download or read book Electronic Materials written by Yuriy M. Poplavko and published by Elsevier. This book was released on 2018-11-23 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical and thermal properties are reviewed and electrical and magnetic properties are emphasized. Basics of symmetry and internal structure of crystals and the main properties of metals, dielectrics, semiconductors, and magnetic materials are discussed. The theory and modern experimental data are presented, as well as the specifications of materials that are necessary for practical application in electronics. The modern state of research in nanophysics of metals, magnetic materials, dielectrics and semiconductors is taken into account, with particular attention to the influence of structure on the physical properties of nano-materials. The book uses simplified mathematical treatment of theories, while emphasis is placed on the basic concepts of physical phenomena in electronic materials. Most chapters are devoted to the advanced scientific and technological problems of electronic materials; in addition, some new insights into theoretical facts relevant to technical devices are presented. Electronic Materials is an essential reference for newcomers to the field of electronics, providing a fundamental understanding of important basic and advanced concepts in electronic materials science. Provides important overview of the fundamentals of electronic materials properties significant for device applications along with advanced and applied concepts essential to those working in the field of electronics Takes a simplified and mathematical approach to theories essential to the understanding of electronic materials and summarizes important takeaways at the end of each chapter Interweaves modern experimental data and research in topics such as nanophysics, nanomaterials and dielectrics
Download or read book Materials Science and Nanotechnology written by Andrew Green and published by . This book was released on 2016-05-26 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This profound book on materials science and nanotechnology focuses upon the design and discovery of various nanomaterials and nanocomposites. It consists of studies provided by internationally renowned experts from the fields of nanotechnology and materials science. The topics elucidated in this book include various processes and techniques for formation of different nanomaterials and composites, their structures, properties and applications. It brings forth new concepts and applied aspects for further research and discussion. The chapters included herein, with their detailed analyses and data, will prove immensely beneficial to professionals and students involved in these fields at various levels.
Download or read book Nanostructured Coatings written by Albano Cavaleiro and published by Springer Science & Business Media. This book was released on 2007-02-19 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book delivers practical insight into a broad range of fields related to hard coatings, from their deposition and characterization up to the hardening and deformation mechanisms allowing the interpretation of results. The text examines relationships between structure/microstructure and mechanical properties from fundamental concepts, through types of coatings, to characterization techniques. The authors explore the search for coatings that can satisfy the criteria for successful implementation in real mechanical applications.
Download or read book CRC Materials Science and Engineering Handbook written by James F. Shackelford and published by CRC Press. This book was released on 2000-12-26 with total page 1972 pages. Available in PDF, EPUB and Kindle. Book excerpt: The CRC Materials Science and Engineering Handbook, Third Edition is the most comprehensive source available for data on engineering materials. Organized in an easy-to-follow format based on materials properties, this definitive reference features data verified through major professional societies in the materials field, such as ASM International a
Download or read book Silicon Materials Science and Technology written by Howard R. Huff and published by The Electrochemical Society. This book was released on 1998 with total page 894 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 23rd Brazilian Conference on Materials Science and Engineering written by Lalgudi Venkataraman Ramanathan and published by Trans Tech Publications Ltd. This book was released on 2020-10-27 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected peer-reviewed full text papers from 23rd CBECIMAT Selected, peer-reviewed papers from the 23rd Brazilian Conference on Materials Science and Engineering (23rd CBECIMAT), November 4-8, 2018, Foz do Iguaçu, Brazil
Download or read book Silicon Materials Science and Technology written by and published by The Electrochemical Society. This book was released on 1998 with total page 894 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book First International Congress on Adhesion Science And Technology invited Papers written by W. J. Van Ooij and published by VSP. This book was released on 1998-12 with total page 970 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Festschrift documents the Proceedings of the First International Congress on Adhesion Science and Technology, held in honor of Dr. Kash Mittal on the occasion of his 50 birthday, in Amsterdam, The Netherlands, October 16-20, 1995. It contains the full accounts of the plenary and invited lectures, which are divided into the following seven parts: Part 1: Fundamental aspects of adhesion and general topics; Part 2: Contact angle, wettability and surface energetics; Part 3: Surface modification: Relevance to adhesion; Part 4: Adhesives and adhesive joints; Part 5: Adhesion aspects of polymeric coatings, and polymer-polymer interphase; Part 6: Metal-polymer and metal-ceramic adhesion; and Part 7: General papers. The topics covered include many different aspects of adhesion science and technology, and both fundamental and applied issues are addressed. The final section of this volume gives a listing of titles, authors and affiliations of the other 185 papers which were included in the technical program of the conference.
Download or read book First International Congress on Adhesion Science and Technology invited papers written by W.J. van Ooij and published by CRC Press. This book was released on 2023-03-08 with total page 966 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Festschrift documents the Proceedings of the First International Congress on Adhesion Science and Technology, held in honor of Dr. Kash Mittal on the occasion of his 50 birthday, in Amsterdam, The Netherlands, October 16-20, 1995. It contains the full accounts of the plenary and invited lectures, which are divided into the following seven part
Download or read book Advances in Material Science written by Sandip A. Kale and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected peer-reviewed full text papers from the International Conference on Advances in Material Science (ICAMS 2020) Selected, peer-reviewed papers from the International Conference on Advances in Material Science (ICAMS 2020), October 3, 2020, Pune, India
Download or read book Cell Culture Engineering written by Wei-Shu Hu and published by Springer. This book was released on 2006-08-16 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the introduction of recombinant human growth hormone and insulin a quarter century ago, protein therapeutics has greatly broadened the ho- zon of health care. Many patients suffering with life-threatening diseases or chronic dysfunctions, which were medically untreatable not long ago, can attest to the wonder these drugs have achieved. Although the ?rst generation of p- tein therapeutics was produced in recombinant Escherichia coli, most recent products use mammalian cells as production hosts. Not long after the ?rst p- duction of recombinant proteins in E. coli, it was realized that the complex tasks of most post-translational modi?cations on proteins could only be ef?ciently carried out in mammalian cells. In the 1990s, we witnessed a rapid expansion of mammalian-cell-derived protein therapeutics, chie?y antibodies. In fact, it has been nearly a decade since the market value of mammalian-cell-derived protein therapeutics surpassed that of those produced from E. coli. A common characteristic of recent antibody products is the relatively large dose required for effective therapy, demanding larger quantities for the treatment of a given disease. This, coupled with the broadening repertoire of protein drugs, has rapidly expanded the quantity needed for clinical applications. The increasing demand for protein therapeutics has not been met exclusively by construction of new manufacturing plants and increasing total volume capacity. More - portantly the productivity of cell culture processes has been driven upward by an order of magnitude in the past decade.
Download or read book Materials Discovery and Design written by Turab Lookman and published by Springer. This book was released on 2018-09-22 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the current status, challenges and future directions of data-driven materials discovery and design. It presents the analysis and learning from data as a key theme in many science and cyber related applications. The challenging open questions as well as future directions in the application of data science to materials problems are sketched. Computational and experimental facilities today generate vast amounts of data at an unprecedented rate. The book gives guidance to discover new knowledge that enables materials innovation to address grand challenges in energy, environment and security, the clearer link needed between the data from these facilities and the theory and underlying science. The role of inference and optimization methods in distilling the data and constraining predictions using insights and results from theory is key to achieving the desired goals of real time analysis and feedback. Thus, the importance of this book lies in emphasizing that the full value of knowledge driven discovery using data can only be realized by integrating statistical and information sciences with materials science, which is increasingly dependent on high throughput and large scale computational and experimental data gathering efforts. This is especially the case as we enter a new era of big data in materials science with the planning of future experimental facilities such as the Linac Coherent Light Source at Stanford (LCLS-II), the European X-ray Free Electron Laser (EXFEL) and MaRIE (Matter Radiation in Extremes), the signature concept facility from Los Alamos National Laboratory. These facilities are expected to generate hundreds of terabytes to several petabytes of in situ spatially and temporally resolved data per sample. The questions that then arise include how we can learn from the data to accelerate the processing and analysis of reconstructed microstructure, rapidly map spatially resolved properties from high throughput data, devise diagnostics for pattern detection, and guide experiments towards desired targeted properties. The authors are an interdisciplinary group of leading experts who bring the excitement of the nascent and rapidly emerging field of materials informatics to the reader.
Download or read book Materials Science And Engineering Proceedings Of The 2nd Annual International Workshop Iwmse 2016 written by Roman Szewczyk and published by #N/A. This book was released on 2017-06-29 with total page 1168 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2nd Annual 2016 International Workshop on Materials Science and Engineering (IWMSE 2016) was held in Guangzhou, Guangdong, China on August 12 - August 14, 2016. The main aim of IWMSE 2016 was to provide a platform for scientists and engineers, to get together to share their research findings, exchange ideas and identify the future directions of R&D in materials science.In this conference, we have received over 272 high-quality papers, however, only 160 articles are included in the proceedings, covering topics such as ceramics and glasses, amorphous materials, nanomaterials and thin layers, soft magnetic materials, biomaterials, polymers, photovoltaic materials, steels, tool materials, composites, as well as functional and smart materials.
Download or read book Proceedings of the 2nd Annual International Conference on Material Machines and Methods for Sustainable Development MMMS2020 written by Banh Tien Long and published by Springer Nature. This book was released on 2021-03-26 with total page 1088 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected, peer-reviewed proceedings of the 2nd International Conference on Material, Machines and Methods for Sustainable Development (MMMS2020), held in the city of Nha Trang, Vietnam, from 12 to 15 November, 2020. The purpose of the conference is to explore and ensure an understanding of the critical aspects contributing to sustainable development, especially materials, machines and methods. The contributions published in this book come from authors representing universities, research institutes and industrial companies, and reflect the results of a very broad spectrum of research, from micro- and nanoscale materials design and processing, to mechanical engineering technology in industry. Many of the contributions selected for these proceedings focus on materials modeling, eco-material processes and mechanical manufacturing.
Download or read book Artificial Muscle Actuators using Electroactive Polymers written by Pietro Vincenzini and published by Trans Tech Publications Ltd. This book was released on 2008-09-02 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: CIMTEC 2008
Download or read book Advanced Materials Research written by Stanislav Kolisnychenko and published by Trans Tech Publications Ltd. This book was released on 2018-11-13 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special topic volume with invited peer reviewed papers only