Download or read book Semiconductor Metal Oxides for Hydrogen Gas Sensing written by Qahtan Al-zaidi and published by LAP Lambert Academic Publishing. This book was released on 2012 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only practical way to imitate human nose function is via gas sensors which monitor air quality and provide a mean to premature alert of potential risk. A gas sensor can form a part of an early warning system, notifying the appropriate authorities or provide the feedback signal to a process control system. To achieve this, the gas sensor must be accurate and stable in-situ real time measurements. It is foreseen that hydrogen energy will form the infrastructure that will power future societies since it is a clean, cost-effective and renewable source of energy. However, hydrogen, being flammable gas, has a lower expolsion limit of 4% in air meaning that even a small spark can ignite the mixture. Therefore, hydrogen generation, transport and storage can be dangerous if not handled with caution. This requires high precision sensitive gas sensors which are able to detect the smallest leaks fastly. Semiconductor Metal Oxide gas sensors are an important candidate for this task.
Download or read book Semiconducting Metal Oxides for Gas Sensing written by Yonghui Deng and published by Springer Nature. This book was released on 2023-08-23 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this book focuses on the synthesis, design, and application of semiconducting metal oxides as gas sensing materials, including the gas sensing mechanism, and modification methods for sensing materials, while also providing a comprehensive introduction to semiconductor gas sensing devices. As an essential part of IoT (Internet of things), gas sensors have shown great significance and promising prospects. Therefore, studies on functional mesoporous metal oxides, one of the most important gas sensing materials based on their unique Knudsen diffusion behavior and tailored pore structure, have increasingly attracted attention from various disciplines. The book offers a valuable reference guide to metal oxide gas sensing materials for undergraduate and graduate students alike. It will also benefit all researchers who are involved in synthesis and gas sensing of metal oxides nanomaterials with relevant frontier theories and concepts. Engineers working on research and development of semiconductor gas sensors will also find some new ideas for sensor design.
Download or read book Semiconductor Gas Sensors written by Raivo Jaaniso and published by Woodhead Publishing. This book was released on 2019-09-24 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductor Gas Sensors, Second Edition, summarizes recent research on basic principles, new materials and emerging technologies in this essential field. Chapters cover the foundation of the underlying principles and sensing mechanisms of gas sensors, include expanded content on gas sensing characteristics, such as response, sensitivity and cross-sensitivity, present an overview of the nanomaterials utilized for gas sensing, and review the latest applications for semiconductor gas sensors, including environmental monitoring, indoor monitoring, medical applications, CMOS integration and chemical warfare agents. This second edition has been completely updated, thus ensuring it reflects current literature and the latest materials systems and applications. Includes an overview of key applications, with new chapters on indoor monitoring and medical applications Reviews developments in gas sensors and sensing methods, including an expanded section on gas sensor theory Discusses the use of nanomaterials in gas sensing, with new chapters on single-layer graphene sensors, graphene oxide sensors, printed sensors, and much more
Download or read book Gas Sensors Based on Conducting Metal Oxides written by Nicolae Barsan and published by Elsevier. This book was released on 2018-10-17 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas Sensors Based on Conducting Metal Oxides: Basic Understanding, Technology and Applications focuses on two distinct types of gas sensors based on conducting metal oxides. Ion conduction, applied in so-called solid-state electrolytic sensors for one, and electronic conduction used in semiconductivity gas sensors for the other. The well-known ?–probe, a key component to optimize combustion in car engines, is an example of the former type, and the in-cabin car air-quality control SnO2 and WO2 sensor array stands for the semiconductivity type. Chapters cover basic aspects of functioning principles and describe the technologies and challenges of present and future sensors. Provides reader background and context on sensors, principles, fabrication and applications Includes chapters on specific technological applications, such as exhaust sensors, environmental sensors, explosive gases alarms and more Presents a structured presentation that allows for quick reference of vital information
Download or read book Physics and Chemistry at Oxide Surfaces written by Claudine Noguera and published by Cambridge University Press. This book was released on 1996-09-28 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first chapter of the book summarizes classical approaches, introduces the concept of ionicity, and describes the mixed iono-covalent character of the oxygen cation bond in bulk materials. The next three chapters focus on the characteristics of the atomic structure (relaxation, rumpling and reconstruction effects), the electronic structure (band width, gap width, etc.) and the excitations of clean surfaces.
Download or read book Metal Oxide Nanostructures as Gas Sensing Devices written by G. Eranna and published by Taylor & Francis. This book was released on 2016-04-19 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Nanostructures as Gas Sensing Devices explores the development of an integrated micro gas sensor that is based on advanced metal oxide nanostructures and is compatible with modern semiconductor fabrication technology. This sensor can then be used to create a compact, low-power, handheld device for analyzing air ambience.The book first c
Download or read book The Stannic Oxide Gas SensorPrinciples and Applications written by Kousuke Ihokura and published by CRC Press. This book was released on 2017-12-14 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Stannic Oxide Gas Sensor presents a comprehensive overview of the background science and technology of the subject, including practical information on its applications and the electronic circuits with which it is associated. The book explains the chemistry of the device and covers typical methods of fabrication. Sensitivity and selectivity are addressed, and the problems of drift with ambient temperature, relative humidity, and time are fully discussed. The book also presents examples of industrial, commercial, and domestic applications. It explains the design of appropriate electronic circuits and describes methods for testing and characterizing sensors. Advantages and disadvantages of sensors are assessed as well.
Download or read book Science and Technology of Chemiresistor Gas Sensors written by Dinesh K. Aswal and published by Nova Publishers. This book was released on 2007 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas sensor technology has advanced remarkably during past few decades and has become one of the indispensable technologies for modern society. Varieties of gas sensors are commercially available and, using innovative ideas, efforts are being made to develop gas sensors of next generation having very small size with very low power consumption. The ultimate model for this is probably given by sensory organs of our own body, which are implanted finely and work well with a very modest amount of energy. In order to achieve this goal, it is essential that various aspects of gas sensors are seriously considered. These include understanding of gas sensing mechanisms, development of new materials and methods to synthesise them into selective sensors, innovations in nanostructured materials, measurement methods, microfabrication of sensors, exploring intelligent sensing system, etc. This book examines these issues pertaining to chemiresistive gas sensors.
Download or read book Solid State Gas Sensors written by P. T. Moseley and published by CRC Press. This book was released on 1987 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: An overview of the principles & current technology of the main sensor types used for flammable gas detection, oxygen monitoring in combustion & car-exhaust control. Also includes toxic gas monitoring. A companion volume to Techniques & Mechanisms in Gas Sensing.
Download or read book Smart Sensors for Environmental and Medical Applications written by Hamida Hallil and published by John Wiley & Sons. This book was released on 2020-05-12 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an introduction to the topic of smart chemical sensors, along with an overview of the state of the art based on potential applications This book presents a comprehensive overview of chemical sensors, ranging from the choice of material to sensor validation, modeling, simulation, and manufacturing. It discusses the process of data collection by intelligent techniques such as deep learning, multivariate analysis, and others. It also incorporates different types of smart chemical sensors and discusses each under a common set of sub-sections so that readers can fully understand the advantages and disadvantages of the relevant transducers—depending on the design, transduction mode, and final applications. Smart Sensors for Environmental and Medical Applications covers all major aspects of the field of smart chemical sensors, including working principle and related theory, sensor materials, classification of respective transducer type, relevant fabrication processes, methods for data analysis, and suitable applications. Chapters address field effect transistors technologies for biological and chemical sensors, mammalian cell–based electrochemical sensors for label-free monitoring of analytes, electronic tongues, chemical sensors based on metal oxides, metal oxide (MOX) gas sensor electronic interfaces, and more. Addressing the limitations and challenges in obtaining state-of-the-art smart biochemical sensors, this book: Balances the fundamentals of sensor design, fabrication, characterization, and analysis with advanced methods Categorizes sensors into sub-types and describes their working, focusing on prominent applications Describes instrumentation and IoT networking methods of chemical transducers that can be used for inexpensive, accurate detection in commercialized smart chemical sensors Covers monitoring of food spoilage using polydiacetylene- and liposome-based sensors; smart and intelligent E-nose for sensitive and selective chemical sensing applications; odor sensing system; and microwave chemical sensors Smart Sensors for Environmental and Medical Applications is an important book for senior-level undergraduate and graduate students learning about this high-performance technology and its many applications. It will also inform practitioners and researchers involved in the creation and use of smart sensors.
Download or read book Metal Oxide Nanoparticles 2 Volume Set written by Oliver Diwald and published by John Wiley & Sons. This book was released on 2021-09-14 with total page 903 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Nanoparticles A complete nanoparticle resource for chemists and industry professionals Metal oxide nanoparticles are integral to a wide range of natural and technological processes—from mineral transformation to electronics. Additionally, the fields of engineering, electronics, energy technology, and electronics all utilize metal oxide nanoparticle powders. Metal Oxide Nanoparticles: Formation, Functional Properties, and Interfaces presents readers with the most relevant synthesis and formulation approaches for using metal oxide nanoparticles as functional materials. It covers common processing routes and the assessment of physical and chemical particle properties through comprehensive and complementary characterization methods. This book will serve as an introduction to nanoparticle formulation, their interface chemistry and functional properties at the nanoscale. It will also act as an in-depth resource, sharing detailed information on advanced approaches to the physical, chemical, surface, and interface characterization of metal oxide nanoparticle powders and dispersions. Addresses the application of metal oxide nanoparticles and its economic impact Examines particle synthesis, including the principles of selected bottom-up strategies Explores nanoparticle formulation—a selection of processing and application routes Discusses the significance of particle surfaces and interfaces on structure formation, stability and functional materials properties Covers metal oxide nanoparticle characterization at different length scales With this valuable resource, academic researchers, industrial chemists, and PhD students can all gain insight into the synthesis, properties, and applications of metal oxide nanoparticles.
Download or read book Fundamentals and Applications of Chemical Sensors written by Dennis Schuetzle and published by . This book was released on 1986 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the first comprehensive collection of articles on the fundamentals and applications of a wide variety of chemical sensors. Discusses a range of topics from the development of new sensor concepts to improvement in sensors that have been mass produced for several years. Specific types of sensors discussed include oxygen, electrochemical, microbial, drug, and glucose sensors.
Download or read book Metal Oxide Nanocomposites written by B. Raneesh and published by John Wiley & Sons. This book was released on 2021-02-17 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Nanocomposites: Synthesis and Applications summarizes many of the recent research accomplishments in the area of metal oxide-based nanocomposites. This book focussing on the following topics: Nanocomposites preparation and characterization of metal oxide nanocomposites; synthesis of core/shell metal oxide nanocomposites; multilayer thin films; sequential assembly of nanocomposite materials; semiconducting polymer metal oxide nanocomposites; graphene-based metal and metal oxide nanocomposites; carbon nanotube–metal–oxide nanocomposites; silicon mixed oxide nanocomposites; gas semiconducting sensors based on metal oxide nanocomposites; metal ]organic framework nanocomposite for hydrogen production and nanocomposites application towards photovoltaic and photocatalytic.
Download or read book Complex and Composite Metal Oxides for Gas VOC and Humidity Sensors Volume 2 written by Bal Chandra Yadav and published by Elsevier. This book was released on 2024-04-01 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: Approx.530 pages Provides an overview of the material preparation and synthesis strategies of metal oxide composite and metal oxide hybrid materials for use in gas and humidity sensors Reviews emerging advanced metal oxide materials such as perovskites, spinel ferrites, and quaternary materials for gas and VOC sensors Discusses the potential opportunities and challenges to be circumvented in the use of metal oxide materials to enable new sensor technologies
Download or read book Gas Sensors written by Ankur Gupta and published by CRC Press. This book was released on 2022-11-28 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the whole range of gas sensing aspects starting from basics, synthesis, processing, characterization, and application developments. All sub-topics within the domain of gas sensors such as active materials, novel nanomaterials, working mechanisms, fabrication techniques, computational approach, and development of microsensors, and latest advancements such as the Internet of Things (IoT) in gas sensors, and nanogenerators, are explained as well. Related manufacturing sections and proposed direction of future research are also reviewed. Features: Covers detailed state-of-the-art specific chemiresistive sensing materials. Presents novel nanomaterial platforms and concepts for resistive gas sensing. Reviews pertinent aspects of smart sensors and IoT sensing. Explains nanotechnology-enabled experimental findings, and future directions of smart gas sensing technology. Explores implication of latest advancements such as IoT in gas sensors, and nanogenerators. This book is aimed at academic researchers and professionals in sensors and actuators, nanotechnology, and materials science.
Download or read book Oxide Nanostructures written by Avanish Kumar Srivastava and published by CRC Press. This book was released on 2014-04-09 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanomaterials, their synthesis, and property studies have been an obsession with modern current physicists, chemist, and materials scientists for their vast array of technological implications and the remarkable way their properties are modified or enhanced when the size dimensions are reduced to the realm of nanometers. Although nanomaterials, for
Download or read book Advanced Gas Sensing written by Theodor Doll and published by Springer Science & Business Media. This book was released on 2003-05-31 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Gas Sensing focuses on the Electroadsorptive Effect: its theory, experimental measurement and applications in consumer gas sensors as well as in surface physics laboratory work. The Electroadsorptive Effect is invaluable when used in MEMS gas sensors. The authors use a general approach that covers new insights into temperature modulation and the use of light. The emphasis is given to electrical fields in gas sensors, which cause the Electroadsorptive Effect. The effect has long been known by experts working in the field, but has been regarded as too difficult for use until recently because of increasing sensor miniaturization. The book will serve as an introduction to sensitivity tuning of semiconductor gas sensors, introducing the underlying theory and experimental models before moving on to design considerations, applications and market considerations. A literature review and examples of experimental data are included.
