Download or read book Scheduling with Time Changing Effects and Rate Modifying Activities written by Vitaly A. Strusevich and published by Springer. This book was released on 2016-10-18 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: In scheduling theory, the models that have attracted considerable attention during the last two decades allow the processing times to be variable, i.e., to be subjected to various effects that make the actual processing time of a job dependent on its location in a schedule. The impact of these effects includes, but is not limited to, deterioration and learning. Under the first type of effect, the later a job is scheduled, the longer its actual processing time becomes. In the case of learning, delaying a job will result in shorter processing times. Scheduling with Time-Changing Effects and Rate-Modifying Activities covers and advances the state-of-the-art research in this area. The book focuses on single machine and parallel machine scheduling problems to minimize either the maximum completion time or the sum of completion times of all jobs, provided that the processing times are subject to various effects. Models that describe deterioration, learning and general non-monotone effects to be considered include positional, start-time dependent, cumulative and their combinations, which cover most of the traditionally used models. The authors also consider more enhanced models in which the decision-maker may insert certain Rate-Modifying Activities (RMA) on processing machines, such as for example, maintenance or rest periods. In any case, the processing times of jobs are not only dependent on effects mentioned above but also on the place of a job in a schedule relative to an RMA. For most of the enhanced models described in the book, polynomial-time algorithms are presented which are based on similar algorithmic ideas such as reduction to linear assignment problems (in a full form or in a reduced form), discrete convexity, and controlled generation of options.
Download or read book Scheduling written by Michael L. Pinedo and published by Springer Nature. This book was released on 2022-12-13 with total page 691 pages. Available in PDF, EPUB and Kindle. Book excerpt: The sixth edition provides expanded Discussion and Comments and References sections at the end of each chapter, creating a spotlight on practical applications of the theory presented in that chapter. New topics include rules for stochastic parallel machine scheduling and for stochastic online scheduling, models of flow shops with reentry, fixed parameter tractability, and new designs and implementations of scheduling systems. The main structure of the book as per previous edition consists of three parts. The first part focuses on deterministic scheduling and the related combinatorial problems. The second part covers probabilistic scheduling models; in this part it is assumed that processing times and other problem data are random and not known in advance. The third part deals with scheduling in practice; it covers heuristics that are popular with practitioners and discusses system design and implementation issues. All three parts of this new edition have been revamped and streamlined and the references have been made up-to-date. Theoreticians and practitioners alike will find this book of interest. Graduate students in operations management, operations research, industrial engineering, and computer science will find the book an accessible and invaluable resource. Scheduling - Theory, Algorithms, and Systems will serve as an essential reference for professionals working on scheduling problems in manufacturing, services, and other environments. Michael L. Pinedo is the Julius Schlesinger Professor of Operations Management in the Stern School of Business at New York University.
Download or read book Combinatorial Optimization and Applications written by Peter Widmayer and published by Springer. This book was released on 2013-11-21 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 7th International Conference on Combinatorial Optimization and Applications, COCOA 2013, held in Chengdu, China, in December 2013. The 36 full papers presented were carefully reviewed and selected from 72 submissions. The papers feature original research in the areas of combinatorial optimization and its applications. In addition to theoretical results there are reports on experimental and applied research of general algorithmic interest.
Download or read book Mastering Project Time Management Cost Control and Quality Management written by Randal Wilson and published by FT Press. This book was released on 2015-04-23 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mastering Project Time Management, Cost Control, and Quality Management gives managers powerful insights and tools for addressing the "Triple Constraints" that define virtually every project: time, cost, and quality. This book is part of a new series of seven cutting-edge project management guides for both working practitioners and students. Like all books in this series, it offers deep practical insight into the successful design, management, and control of complex modern projects. Using real case studies and proven applications, expert authors show how multiple functions and disciplines can and must be integrated to achieve a successful outcome. Individually, these books focus on realistic, actionable solutions, not theory. Together, they provide comprehensive guidance for working project managers at all levels, including highly-complex enterprise environments. These books also provide indispensable knowledge for anyone pursuing PMI/PMBOK or PRINCE2 certification, or other accreditation in the field.
Download or read book Computing in Civil Engineering written by and published by . This book was released on 1998 with total page 966 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Behavior Change in the Human Services written by Martin Sundel and published by SAGE Publications. This book was released on 2017-01-13 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using a unique behavioral assessment and treatment planning framework, the updated Sixth Edition provides a systematic overview of behavioral and cognitive principles and their applications to a wide range of issues and situations encountered in human services professions. Up-to-date practice examples drawn from eight diverse case studies illustrate the range and versatility of the behavior change approach in an increasingly diverse and multicultural society, while an innovative chapter on clinical applications of behavioral and cognitive intervention techniques also addresses current influences in the field. This edition embraces the rigorous empirical foundations that have made this approach such a significant contributor to the national and international therapeutic milieu of the 21st century.
Download or read book Handbook of Construction Management written by Abdul Razzak Rumane and published by CRC Press. This book was released on 2016-08-05 with total page 857 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is developed to provide significant information and guidelines to construction and project management professionals (owners, designers, consultants, construction managers, project managers, supervisors, contractors, builders, developers, and many others from the construction-related industry) involved in construction projects (mainly civil construction projects, commercial-A/E projects) and construction-related industries. It covers the importance of construction management principles, procedures, concepts, methods, and tools, and their applications to various activities/components/subsystems of different phases of the life cycle of a construction project. These applications will improve the construction process in order to conveniently manage the project and make the project most qualitative, competitive, and economical. It also discuss the interaction and/or combination among some of the activities/elements of management functions, management processes, and their effective implementation and applications that are essential throughout the life cycle of project to conveniently manage the project. This handbook will: Focus on the construction management system to manage construction projects Include a number of figures and tables which will enhance reader comprehension Provide all related topics/areas of construction management Be of interest to all those involved in construction management and project management Provide information about Building Information Modeling (BIM), and ISO Certification in Construction Industry Offer a chapter on Lean construction The construction project life cycle phases and its activities/elements/subsystems are comprehensively developed and take into consideration Henri Fayol's Management Function concept which was subsequently modified by Koontz and O'Donnel and Management Processes Knowledge Areas described in PMBOK® published by Project Management Institute (PMI). The information available in the book will also prove valuable for academics/instructors to provide construction management/project management students with in-depth knowledge and guidelines followed in the construction projects and familiarize them with construction management practices.
Download or read book Encyclopedia of Behavior Modification and Cognitive Behavior Therapy written by Michel Hersen and published by SAGE. This book was released on 2005-01-25 with total page 1857 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a thorough examination of the components of behavior modification, behavior therapy, cognitive behavior therapy, and applied behavior analysis for both child and adult populations in a variety of settings. Although the focus is on technical applications, entries also provide the historical context in which behavior therapists have worked, including research issues and strategies.
Download or read book INFOR written by and published by . This book was released on 2003 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Construction Delays written by Mark F Nagata and published by Butterworth-Heinemann. This book was released on 2017-09-20 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Construction Delays, Third Edition, provides the latest specialized tools and techniques needed to avoid delays on construction projects. These include institutional, industrial, commercial, hi-rise, power and water, transportation and marine construction projects. Most other references provide only post facto construction delay analysis. This update includes 18 chapters, 105 sections and approximately 100 new pages relative to the second edition. - Features greatly expanded discussion of the project management concerns related to construction delays, including a more comprehensive discussion of the development and review of the project schedule - Offers a detailed analysis of the strengths and weaknesses of the most common construction delay approaches and how they should be properly deployed or avoided - Includes significant discussion of the contract provisions governing scheduling, the measurement of delays and payments for delay - Includes numerous real world case studies
Download or read book Network Scheduling Techniques for Construction Project Management written by M. Hajdu and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial, financial, commercial or any kinds of project have at least one common feature: the better organized they are, the higher the profit or the lower the cost. Project management is the principle of planning different projects and keeping them on track within time, cost and resource constraints. The need for effective project management is ever-increasing. The complexity of the environment we live in requires more sophisticated methods than it did just a couple of decades ago. Project managers might face insurmountable obstacles in their work if they do not adapt themselves to the changing circumstances. On the other hand, better knowledge of project management can result in better plans, schedules and, last but not least, more contracts and more profit. This knowledge can help individuals and firms to stay alive in this competitive market and, in the global sense, utilize the finite resources of our planet in a more efficient way.
Download or read book Advances in Production Management Systems Artificial Intelligence for Sustainable and Resilient Production Systems written by Alexandre Dolgui and published by Springer Nature. This book was released on 2021-09-01 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: The five-volume set IFIP AICT 630, 631, 632, 633, and 634 constitutes the refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2021, held in Nantes, France, in September 2021.* The 378 papers presented were carefully reviewed and selected from 529 submissions. They discuss artificial intelligence techniques, decision aid and new and renewed paradigms for sustainable and resilient production systems at four-wall factory and value chain levels. The papers are organized in the following topical sections: Part I: artificial intelligence based optimization techniques for demand-driven manufacturing; hybrid approaches for production planning and scheduling; intelligent systems for manufacturing planning and control in the industry 4.0; learning and robust decision support systems for agile manufacturing environments; low-code and model-driven engineering for production system; meta-heuristics and optimization techniques for energy-oriented manufacturing systems; metaheuristics for production systems; modern analytics and new AI-based smart techniques for replenishment and production planning under uncertainty; system identification for manufacturing control applications; and the future of lean thinking and practice Part II: digital transformation of SME manufacturers: the crucial role of standard; digital transformations towards supply chain resiliency; engineering of smart-product-service-systems of the future; lean and Six Sigma in services healthcare; new trends and challenges in reconfigurable, flexible or agile production system; production management in food supply chains; and sustainability in production planning and lot-sizing Part III: autonomous robots in delivery logistics; digital transformation approaches in production management; finance-driven supply chain; gastronomic service system design; modern scheduling and applications in industry 4.0; recent advances in sustainable manufacturing; regular session: green production and circularity concepts; regular session: improvement models and methods for green and innovative systems; regular session: supply chain and routing management; regular session: robotics and human aspects; regular session: classification and data management methods; smart supply chain and production in society 5.0 era; and supply chain risk management under coronavirus Part IV: AI for resilience in global supply chain networks in the context of pandemic disruptions; blockchain in the operations and supply chain management; data-based services as key enablers for smart products, manufacturing and assembly; data-driven methods for supply chain optimization; digital twins based on systems engineering and semantic modeling; digital twins in companies first developments and future challenges; human-centered artificial intelligence in smart manufacturing for the operator 4.0; operations management in engineer-to-order manufacturing; product and asset life cycle management for smart and sustainable manufacturing systems; robotics technologies for control, smart manufacturing and logistics; serious games analytics: improving games and learning support; smart and sustainable production and supply chains; smart methods and techniques for sustainable supply chain management; the new digital lean manufacturing paradigm; and the role of emerging technologies in disaster relief operations: lessons from COVID-19 Part V: data-driven platforms and applications in production and logistics: digital twins and AI for sustainability; regular session: new approaches for routing problem solving; regular session: improvement of design and operation of manufacturing systems; regular session: crossdock and transportation issues; regular session: maintenance improvement and lifecycle management; regular session: additive manufacturing and mass customization; regular session: frameworks and conceptual modelling for systems and services efficiency; regular session: optimization of production and transportation systems; regular session: optimization of supply chain agility and reconfigurability; regular session: advanced modelling approaches; regular session: simulation and optimization of systems performances; regular session: AI-based approaches for quality and performance improvement of production systems; and regular session: risk and performance management of supply chains *The conference was held online.
Download or read book Integrated Cost Schedule Risk Analysis written by Dr David Hulett and published by Gower Publishing, Ltd.. This book was released on 2012-09-28 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: Project managers tend to believe their cost estimates - whether they have exceeded budgets in the past or not. It is dangerous to accept the engineering cost estimates, which are often optimistic or unrealistic. Though cost estimates incorporate contingency reserves below-the-line, these estimates of reserves often do not benefit from a rigorous assessment of risk to project costs. Risks to cost come from multiple sources including uncertain project duration, which is often ignored in cost risk analyses. In short, experience shows that cost estimating on projects is rarely successful - cost overruns routinely occur. There are effective ways to estimate the impact on the cost of complex projects from project risks of all types, including traditional cost-type risks and the indirect but often substantial impact from risks usually thought of as affecting project schedules. Integrated cost-schedule risk anlaysis helps us determine how likely the project will go over budget with the current plan, how much contingency reserve is required to achieve a desired level of certainty, and which risks are most important so the project manager can mitigate them and achieve a better result. Integrated Cost-Schedule Risk Analysis provides solutions for these and other challenges. This book follows on from David Hulett's highly-praised Practical Schedule Risk Analysis. It focuses on the way that schedule risk can generate cost risk, and how to handle this relationship. It also applies the Risk Driver Method to the analysis so that you can clearly and transparently identify the key risks, rather than just the most risky cost line items. With detailed worked examples and over 70 illustrations, Integrated Cost-Schedule Risk Analysis offers the definitive guide to this critically important aspect of project management from surely the world's leading commentator.
Download or read book Bureau of Reclamation Interior power activities written by United States. Congress. Senate. Committee on Appropriations and published by . This book was released on 1968 with total page 1120 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Federal Register written by and published by . This book was released on 2012-05 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Air Force Engineering Services Quarterly written by and published by . This book was released on 1984 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Construction Specifications Writing written by Mark Kalin and published by John Wiley & Sons. This book was released on 2011-09-13 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated edition of the comprehensive rulebook to the specifier's craft With this latest update, Construction Specifications Writing, Sixth Edition continues to claim distinction as the foremost text on construction specifications. This mainstay in the field offers comprehensive, practical, and professional guidance to understanding the purposes and processes for preparation of construction specifications. This new edition uses real-world document examples that reflect current writing practices shaped by the well-established principles and requirements of major professional associations, including the American Institute of Architects (AIA), the Engineers Joint Contract Documents Committee (EJCDC), and the Construction Specifications Institute (CSI). Also included are guidelines for correct terminology, product selection, organization of specifications according to recognized CSI formats, and practical techniques for document production. Fully revised throughout, this Sixth Edition includes: Updates to MasterFormat 2004, as well as SectionFormat/PageFormat 2007 and Uniformat End-of-chapter questions and specification-writing exercises Samples of the newly updated construction documents from the AIA New chapter on sustainable design and specifications for LEED projects Updated information on the role of specifications in Building Information Modeling (BIM)
