Download or read book Fire Resistant and Thermally Stable Materials Derived from Chlorinated Polyethylene written by Gennady Zaikov and published by CRC Press. This book was released on 2023-01-06 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new volume in the book series New Concepts in Polymer Science focuses on the problem of creating materials with reduced combustibility as well as the use of polymeric materials for protection from fire or overheating. The majority of polymeric materials are combustible, which has led to the development of polymers, and materials based on these, with reduced combustibility. However the combustibility degree or their ability to protect from fire or high temperature can be indicated only in particular cases of combustion. In this volume the results of the development of physicochemical bases for creating organic polymeric materials with reduced combustibility, which are capable of protecting against high temperatures are discussed. A presentation of chlorinated polyolefins as organic polymers with reduced combustibility is also given.
Download or read book Organic Coatings written by Frank N. Jones and published by John Wiley & Sons. This book was released on 2017-08-30 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive guide to organic coatings, thoroughly revised and updated—now with coverage of a range of topics not covered in previous editions Organic Coatings: Science and Technology, Fourth Edition offers unparalleled coverageof organic coatings technology and its many applications. Written by three leading industry experts (including a new, internationally-recognized coatings scientist) it presents a systematic survey of the field, revises and updates the material from the previous edition, and features new or additional treatment of such topics as superhydrophobic, ice-phobic, antimicrobial, and self-healing coatings; sustainability, artist paints, and exterior architectural primers. making it even more relevant and useful for scientists and engineers in the field, as well as for students in coatings courses. The book incorporates up-to-date coverage of recent developments in the field with detailed discussions of the principles underlying the technology and their applications in the development, production, and uses of organic coatings. All chapters in this new edition have been updated to assure consistency and to enable extensive cross-referencing. The material presented is also applicable to the related areas of printing inks and adhesives, as well as areas within the plastics industry. This new edition Completely revises outdated chapters to ensure consistency and to enable extensive cross-referencing Correlates the empirical technology of coatings with the underlying science throughout Provides expert troubleshooting guidance for coatings scientists and technologists Features hundreds of illustrative figures and extensive references to the literature A new, internationally-recognized coatings scientist brings fresh perspective to the content. Providing a broad overview for beginners in the field of organic coatings and a handy reference for seasoned professionals, Organic Coatings: Science and Technology, Fourth Edition, gives you the information and answers you need, when you need them.
Download or read book Synthetic Resins and Their Plastics written by Carleton Ellis and published by . This book was released on 1923 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Need for synthetic resins and types desired. Cumaron and indene resins. Commercial grades of cumaron resin, their uses and identification. Modern methods of producing cumaron resin. Resins from petroleum. polymerization of certain unsatured hydrocarbons. The resinous condensation products of phenols nad aldehydes. Phenol-formaldehyde resins. bakelite, condensite, redmanol and miscellaneous phenol-formaldehyde resins. Applications of phenol-formaldehyde resins. Aldehyde resins. Furfural resins. Ketone resins. Urea and thiourea resins. Resins from wood and wood distillation. Hardened rosin and resinates. Ester gums of artificial resins ester. Resins from polybasic acids and polydric alcohols. Polymerization of vinyl compounds. Sulphur resins. Nitro resins. Halogenated rubber. Miscellaneous resins. Certain resinous products derived from fatty oils. Preparation and properties of plastic molding compositions. Equipment for molding plastics compositions. Methods of molding.
Download or read book The Rapra Collection of Infrared Spectra of Rubbers Plastics and Thermoplastic Elastomers written by Martin Forrest and published by iSmithers Rapra Publishing. This book was released on 2007 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the 3rd Edition of this popular, authoritative and respected book, the collection has been completely revised and enlarged, with the addition of around 200 new spectra bringing the total number in the library to around 800. A number of improvements in the layout and design of the collection have been made. Some of these, such as a simpler classification system, clearer headings for the spectra, and the insertion of material indexes at the end of each section have been designed to make the library quicker and easier to use. It is also the case that, whereas the previous two editions were comprised of only four separate sub-libraries, covering the transmission and pyrolysate spectra of both rubber and plastic materials, another major improvement for this edition has been the incorporation of an additional, comprehensive library produced using a single bounce attenuated total reflectance (ATR) accessory. This is a very useful development, as since the publication of the second edition of this library in 1997, this type of ATR technique has acquired a high degree of popularity due to its many attributes, including speed and ease of use, the need for only small amounts of sample, and its virtually non-destructive nature. All the spectra in the collection have been collected and stored at a resolution of 4 cm-1 and are plotted as percentage transmittance against wavenumber. For the transmission and pyrolyate spectra, the wavenumber range shown is 400 to 4000 cm-1, whereas for the single bounce, diamond window ATR spectra the range is 650 to 4000 cm-1. The layout of the spectra has been changed for this edition - within each of the five sub-libraries spectra are listed in alphabetical order according to material type, which is displayed in the main heading above each spectrum. A number of polymer blends are represented in these sub-libraries, and the proportions of the polymers in the blend is also shown in this main heading. There is also a secondary heading for each spectrum, where as much additional information as possible has been provided, e.g., the trade name of the material, its manufacturer, compositional information, (e.g., fillers present), and the method of preparing the sample, (e.g., film cast from chloroform) for the recording of the spectrum. As mentioned above, transmission, pyrolysate and ATR spectra are all present in the library. Two different approaches were used to produce the sample films that were used for the recording of the transmission spectra: hot pressing, and casting from a polymer solution. The pyrolysate spectra of the polymers were recorded from collected pyrolysis condensates. Where necessary, samples for pyrolysate work were cleaned up by an initial solvent extraction step. The spectra for the ATR part of the library were recorded using a single bounce, diamond window ATR accessory. This library represents one of the most comprehensive, independent collections of infrared spectra that are commercially available. Drawing on Rapra's international reputation as a centre of excellence and compiled by polymer analysts for polymer analysts it has proved, since the first edition appeared in 1992, to be of immense value to users from both academia and industry. The many improvements in this edition, particularly the inclusion of an ATR section and the enlargement of the range of polymer blends that are covered, will ensure that this library continues to be a must have acquisition for all those concerned with the analysis of polymers and polymer systems.
Download or read book Rubber Products Manufacturing Technology written by AnilK. Bhowmick and published by Routledge. This book was released on 2018-10-03 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides authoritative coverage of compounding, mixing, calendering, extrusion, vulcanization, rubber bonding, computer-aided design and manufacturing, automation and control using microprocessors, just-in-time technology and rubber plant waste disposal.
Download or read book Chemical Protective Clothing Permeation Degradation Database Macintosh Version written by Michael Blotzer and published by CRC Press. This book was released on 1992-10-26 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: The three most important things to evaluate when selecting Chemical Protective Clothing (CPC) are 1) evidence of degradation of the garment exposed to a chemical; 2) breakthrough time, and 3) permeation rate. Because proper CPC selection must be based on permeation and degradation tests performed upon specific manufacturer products, you need an information source that enables you to access test results quickly and easily. Chemical Protective Clothing Permeation/Degradation Database is that source. It is the world's largest international CPC database, containing over 10,000 results from tests of more than 660 chemicals and mixtures against more than 250 CPC models. Every test result has a complete reference source. Use Chemical Protective Clothing Permeation/Degradation Database as a supplement to your Material Safety Data Sheets to help select the best garments for your particular needs. It will be just as important to use this information to evaluate your existing stock of CPC to determine which chemicals they should not be used with. Furthermore, the powerful searching capabilities built into the database programs help to provide rapid responses in emergency situations, especially when used on portable computers. In fact, searches are even accessible from the U.S. Coast Guard's CameoTM 3 Navigator. ,text>The MacintoshTM version of Chemical Protective Clothing Permeation/Degradation Database can be used on Macintosh Plus, SE, Portable, or any Macintosh II computer with 1 MB (2 MB or more recommended) RAM and a hard drive. You should have Hypercard Version 2.0 or higher and at least 2 MB of available hard drive disk space to use the programs.
Download or read book GLOSSARY OF TERMS relating to Rubber and Rubber Like Materials written by and published by ASTM International. This book was released on with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Library of Congress Subject Headings written by Library of Congress and published by . This book was released on 2002 with total page 1656 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Journal of the Society of Chemical Industry written by Society of Chemical Industry (Great Britain) and published by . This book was released on 1894 with total page 1348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes list of members, 1882-1902 and proceedings of the annual meetings and various supplements.
Download or read book Polymers written by Bryan Ellis and published by CRC Press. This book was released on 2008-10-29 with total page 1129 pages. Available in PDF, EPUB and Kindle. Book excerpt: A reliable source for scientific and commercial information on over 1,000 polymers, this revised and updated edition features 25 percent new material, including 50 entirely new entries that reflect advances in such areas as conducting polymers, hydrogels, nano-polymers, and biomaterials. The second edition also comes with unlimited access to a complete, fully searchable web version of the reference. Powerful retrieval software allows users to customize their searches and refine results. Each entry includes trade names, properties, manufacturing processes, commercial applications, supplier details, references, and links to constituent monomers.
Download or read book Federal Register written by and published by . This book was released on 1946-09 with total page 1020 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Common Polymers Fibres Films Plastics and Rubbers written by John Richard Scott and published by . This book was released on 1971 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Official Gazette of the United States Patent Office written by USA Patent Office and published by . This book was released on 1928 with total page 966 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Investigation of the National Defense Program written by United States. Congress. Senate. Special Committee Investigating the National Defense Program and published by . This book was released on 1941 with total page 1784 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Liner materials exposed to municipal solid waste leachate written by Henry E. Haxo and published by . This book was released on 1979 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Exporting to the United States written by United States. Bureau of Customs and published by . This book was released on 1959 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Standard Industrial Classification Manual written by and published by . This book was released on 1987 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt:
