Download or read book Engineering Rock Mass Classification written by R K Goel and published by Elsevier. This book was released on 2011-08-09 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock mass classification methods are commonly used at the preliminary design stages of a construction project when there is very little information. It forms the bases for design and estimation of the required amount and type of rock support and groundwater control measures. Encompassing nearly all aspects of rock mass classifications in detail, Civil Engineering Rock Mass Classification: Tunnelling, Foundations and Landsides provides construction engineers and managers with extensive practical knowledge which is time-tested in the projects in Himalaya and other parts of the world in complex geological conditions. Rock mass classification is an essential element of feasibility studies for any near surface construction project prior to any excavation or disturbances made to earth. Written by an author team with over 50 years of experience in some of the most difficult mining regions of the world, Civil Engineering Rock Mass Classification: Tunnelling, Foundations and Landsides provides construction engineers, construction managers and mining engineers with the tools and methods to gather geotechnical data, either from rock cuts, drifts or core, and process the information for subsequent analysis. The goal is to use effective mapping techniques to obtain data can be used as input for any of the established rock classification systems. The book covers all of the commonly used classification methods including: Barton’s Q and Q’ systems, Bieniawski’s RMR, Laubscher’s MRMR and Hoek’s and GSI systems. With this book in hand, engineers will be able to gather geotechnical data, either from rock cuts, drifts or core, and process the information for subsequent analysis. Rich with international case studies and worked out equations, the focus of the book is on the practical gathering information for purposes of analysis and design. Identify the most significant parameters influencing the behaviour of a rock mass Divide a particular rock mass formulation into groups of similar behaviour, rock mass classes of varying quality Provide a basis of understanding the characteristics of each rock mass class Relate the experience of rock conditions at one site to the conditions and experience encountered at others Derive quantitative data and guidelines for engineering design Provide common basis for communication between engineers and geologists

Download or read book Engineering Rock Mass Classifications written by Z. T. Bieniawski and published by John Wiley & Sons. This book was released on 1989-08-24 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first authoritative reference on rock mass classification, consolidating into one handy source information once widely scattered throughout the literature. It includes new, previously unpublished material and case histories, presents the fundamental concepts of classification schemes, and critically appraises their practical application in industrial projects such as tunneling and mining.

Download or read book Characterization and Interpretation of Rock Mass Joint Patterns written by P. R. La Pointe and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Rock Engineering written by Arild Palmstrom and published by ICE Publishing. This book was released on 2014-12-19 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Engineering is a valuable reference tool for geotechnical engineers, geologists, consultants, contractors, and advanced students on rock engineering and engineering geology courses.

Download or read book An Introduction to Rock Mass Characterization written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2019-10-06 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil and geotechnical engineers and construction managers interested in design and construction in rock masses. Here is what is discussed: 1. GEOLOGIC DESCRIPTIONS 2. ROCK MASS CLASSIFICATION 3. SHEAR STRENGTH 4. ROCK FAILURE CHARACTERISTICS 5. FAILURE CRITERIA 6. SHEAR STRENGTH TESTS 7. SELECTION OF DESIGN SHEAR STRENGTH PARAMETERS 8. DEFORMATION AND SETTLEMENT 9. TEST METHODS FOR ESTIMATING MODULUS 10. OTHER METHODS FOR ESTIMATING MODULUS 11. CONSIDERATIONS IN SELECTING DESIGN MODULUS VALUES.

Download or read book Measurement of Blast Fragmentation written by John A. Franklin and published by Routledge. This book was released on 2018-12-19 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: A collection of workshop papers providing state-of-the-art reviews on all aspects of fragmentation, including photographic requirements, image enhancement, statistical treatment, and applications in quarrying, mining and minerals processing industries.

Download or read book Rock Mass Characterization written by International Society for Rock Mechanics and published by . This book was released on 1985 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Engineering Rock Mechanics written by John A Hudson and published by Elsevier. This book was released on 2000-06-12 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering rock mechanics is the discipline used to design structures built in rock. These structures encompass building foundations, dams, slopes, shafts, tunnels, caverns, hydroelectric schemes, mines, radioactive waste repositories and geothermal energy projects: in short, any structure built on or in a rock mass. Despite the variety of projects that use rock engineering, the principles remain the same. Engineering Rock Mechanics clearly and systematically explains the key principles behind rock engineering. The book covers the basic rock mechanics principles; how to study the interactions between these principles and a discussion on the fundamentals of excavation and support and the application of these in the design of surface and underground structures. Engineering Rock Mechanics is recommended as an across-the-board source of information for the benefit of anyone involved in rock mechanics and rock engineering.

Download or read book Rock Mass Characterization written by and published by . This book was released on 1985 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Discontinuous Deformation Analysis in Rock Mechanics Practice written by Yossef H. Hatzor and published by CRC Press. This book was released on 2017-07-20 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: The numerical, discrete element, Discontinuous Deformation Analysis (DDA) method was developed by Dr. Gen-hua Shi while he was working at the University of California, Berkeley, under the supervision of Prof. Richard E. Goodman in the late 1980s. Two-dimensional DDA was published in 1993 and three-dimensional DDA in 2001. Since its publication DDA has been verified, validated and applied in numerous studies worldwide and is now considered a powerful and robust method to address both static and dynamic engineering problems in discontinuous rock masses. In this book Yossef H. Hatzor and Guowei Ma, co-chairs of the International Society for Rock Mechanics (ISRM) Commission on DDA, join Dr. Shi in authoring a monograph that presents the state of the art in DDA research. A comprehensive discussion of DDA development since its publication is provided in Chapter 1, followed by concise reviews of 2D and 3D DDA in chapters 2 and 3. Procedures to select geological and numerical input parameters for DDA are discussed in Chapter 4, and DDA validation and verification is presented in Chapter 5. Applications of DDA in underground and rock slope engineering projects are discussed in chapters 6 and 7. In Chapter 8 the novel contact theory recently developed by Dr. Shi is published in its complete form, for the first time. This book is published within the framework of the ISRM Book Series and is the contribution of the ISRM DDA Commission to the international rock mechanics community.

Download or read book An Introduction to Rock Mass Characterization written by J. Paul Guyer and published by . This book was released on 2019-10-06 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil and geotechnical engineers and construction managers interested in design and construction in rock masses. Here is what is discussed:1. GEOLOGIC DESCRIPTIONS2. ROCK MASS CLASSIFICATION3. SHEAR STRENGTH4. ROCK FAILURE CHARACTERISTICS5. FAILURE CRITERIA6. SHEAR STRENGTH TESTS7. SELECTION OF DESIGN SHEAR STRENGTH PARAMETERS8. DEFORMATION AND SETTLEMENT9. TEST METHODS FOR ESTIMATING MODULUS10. OTHER METHODS FOR ESTIMATING MODULUS11. CONSIDERATIONS IN SELECTING DESIGN MODULUS VALUES.

Download or read book Discontinuity Analysis for Rock Engineering written by S.D. Priest and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineers wishing to build structures on or in rock use the discipline known as rock mechanics. This discipline emerged as a subject in its own right about thirty five years ago, and has developed rapidly ever since. However, rock mechanics is still based to a large extent on analytical techniques that were originally formulated for the mechanical design of structures made from man made materials. The single most important distinction between man-made materials and the natural material rock is that rock contains fractures, of many kinds on many scales; and because the fractures - of whatever kin- represent breaks in the mechanical continuum, they are collectively termed 'discontinuities' . An understanding of the mechanical influence of these discontinuities is essential to all rock engineers. Most of the world is made of rock, and most of the rock near the surface is fractured. The fractures dominate the rock mass geometry, deformation modulus, strength, failure behaviour, permeability, and even the local magnitudes and directions of the in situ stress field. Clearly, an understanding of the presence and mechanics of the discontinuities, both singly and in the rock mass context, is therefore of paramount importance to civil, mining and petroleum engineers. Bearing this in mind, it is surprising that until now there has been no book dedicated specifically to the subject of discontinuity analysis in rock engineering.

Download or read book The ISRM Suggested Methods for Rock Characterization Testing and Monitoring 2007 2014 written by R. Ulusay and published by Springer. This book was released on 2014-07-25 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of ISRM suggested methods for testing or measuring properties of rocks and rock masses both in the laboratory and in situ, as well as for monitoring the performance of rock engineering structures. The first collection (Yellow Book) has been published in 1981. In order to provide access to all the Suggested Methods in one volume, the ISRM Blue Book was published in 2007 (by the ISRM via the Turkish National Group) and contains the complete set of Suggested Methods from 1974 to 2006 inclusive. The papers in this most recent volume have been published during the last seven years in international journals, mainly in Rock Mechanics and Rock Engineering. They offer guidance for rock characterization procedures and laboratory and field testing and monitoring in rock engineering. These methods provide a definitive procedure for the identification, measurement and evaluation of one or more qualities, characteristics or properties of rocks or rock systems that produces a test result.

Download or read book An Introduction to Rock Mass Characterization for Foundations for Professional Engineers written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2022-01-28 with total page 45 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil engineers, geotechnical engineers and construction managers interested in rock mass characterization for foundations of buildings and infrastructure features. Here is what is discussed: 1. SCOPE, 2. INTACT ROCK VERSUS ROCK MASS, 3. GEOLOGIC DESCRIPTIONS, 4. ROCK MASS CLASSIFICATION, 5. SHEAR STRENGTH, 6. DEFORMATION AND SETTLEMENT.

Download or read book Block Tests for Rock Mass Characterization written by Nick Barton and published by . This book was released on 1982 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Rock Characterisation Modelling and Engineering Design Methods written by Xia-Ting Feng and published by CRC Press. This book was released on 2013-05-17 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Characterisation, Modelling and Engineering Design Methods contains the contributions presented at the 3rd ISRM SINOROCK Symposium (Shanghai, China, 1820 June 2013). The papers contribute to the further development of the overall rock engineering design process through the sequential linkage of the three themes of rock characterisation, model

Download or read book Soft Rock Mechanics and Engineering written by Milton Kanji and published by Springer Nature. This book was released on 2019-11-24 with total page 753 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a practical reference guide to soft rock mechanics for engineers and scientists. Written by recognized experts, it will benefit professionals, contractors, academics, researchers and students working on rock engineering projects in the fields of civil engineering, mining and construction engineering. Soft Rock Mechanics and Engineering covers a specific subject of great relevance in Rock Mechanics – and one that is directly connected to the design of geotechnical structures under difficult ground conditions. The book addresses practical issues related to the geomechanical properties of these types of rock masses and their characterization, while also discussing advances regarding in situ investigation, safety, and monitoring of geotechnical structures in soft rocks. Lastly, it presents important case histories involving tunnelling, dam foundations, coal and open pit mines and landslides.