Download or read book Robust Control Theory Based Performance Investigation Of An Inverted Pendulum System Using Simulink written by Mustefa Jibril and published by GRIN Verlag. This book was released on 2020-08-21 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: Academic Paper from the year 2020 in the subject Computer Science - Software, , language: English, abstract: In this paper, the performance of inverted pendulum have been Investigated using robust control theory. The robust controllers used in this paper are H∞ Loop Shaping Design Using Glover McFarlane Method and mixed H∞ Loop Shaping Controllers. The mathematical model of Inverted Pendulum, a DC motor, Cart and Cart driving mechanism have been done successfully. Comparison of an inverted pendulum with H∞ Loop Shaping Design Using Glover McFarlane Method and H∞ Loop Shaping Controllers for a control target deviation of an angle from vertical of the inverted pendulum using two input signals (step and impulse). The simulation result shows that the inverted pendulum with mixed H∞ Loop Shaping Controller to have a small rise time, settling time and percentage overshoot in the step response and having a good response in the impulse response too. Finally the inverted pendulum with mixed H∞ Loop Shaping Controller shows the best performance in the overall simulation result.
Download or read book Study of Inverted Pendulum and Design of Different Controllers written by Rohan Rajiv Dotihal and published by . This book was released on 2017 with total page 45 pages. Available in PDF, EPUB and Kindle. Book excerpt: The following project aims to study the modeling process and various controller design for the inverted pendulum system. First, the linearized model of the nonlinear system, including transfer function and state space representation, is derived. Based on such linear models, the open-loop characteristics, such as steady state and transient response, characteristic behavior for step and impulse responses of the system, are studied. Then, various controller design methods are explored with the control objective of maintaining the balancing of the pendulum given the disturbances to the cart which the pendulum is mounted on. Different types of designs methods for the controllers explored for the inverted Pendulum include Linear Quadratic Regulator, Model Predictive Control, robust control design. Simulation of the closed-loop performance is made based on which the frequency response, gain Matrix K, and cost function are studied and compared. The knowledge of matrix theory, engineering mechanics, and differential equations are used in the project to arrive at the solution. The simulation tool MATLAB/Simulink from Mathworks helps in verifying the calculations.
Download or read book The Inverted Pendulum in Control Theory and Robotics written by Olfa Boubaker and published by IET. This book was released on 2017-10-24 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overall picture of historical and current trends and developments in nonlinear control theory, based on the simple structure and rich nonlinear model of the inverted pendulum.
Download or read book Robust Control Design with MATLAB written by Da-Wei Gu and published by Springer Science & Business Media. This book was released on 2005-06-20 with total page 832 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shows readers how to exploit the capabilities of the MATLAB® Robust Control and Control Systems Toolboxes to the fullest using practical robust control examples.
Download or read book Advanced Control of Wheeled Inverted Pendulum Systems written by Zhijun Li and published by Springer Science & Business Media. This book was released on 2012-07-13 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Control of Wheeled Inverted Pendulum Systems is an orderly presentation of recent ideas for overcoming the complications inherent in the control of wheeled inverted pendulum (WIP) systems, in the presence of uncertain dynamics, nonholonomic kinematic constraints as well as underactuated configurations. The text leads the reader in a theoretical exploration of problems in kinematics, dynamics modeling, advanced control design techniques and trajectory generation for WIPs. An important concern is how to deal with various uncertainties associated with the nominal model, WIPs being characterized by unstable balance and unmodelled dynamics and being subject to time-varying external disturbances for which accurate models are hard to come by. The book is self-contained, supplying the reader with everything from mathematical preliminaries and the basic Lagrange-Euler-based derivation of dynamics equations to various advanced motion control and force control approaches as well as trajectory generation method. Although primarily intended for researchers in robotic control, Advanced Control of Wheeled Inverted Pendulum Systems will also be useful reading for graduate students studying nonlinear systems more generally.
Download or read book Control Systems for Standing Balance Using an Inverted Pendulum on a Movable Platform written by David L. Dingman and published by . This book was released on 2005 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: The investigation of a second order system with non-linear feedback is approached from a systems standpoint to simulate human quiet standing on a damped and sprung rocking plate. A search into the current theories has revealed several major approaches to the problem of stability in upright stance. The aim of this work is to apply three promising approaches to the problem of standing on a moving surface to explore the robustness of these methods when dealing with the body coupled with another system. Another goal of the work is to create a versatile Simulink model incorporating the dynamics of the system for use with this and other research.
Download or read book Feedback Systems written by Karl Johan Åström and published by Princeton University Press. This book was released on 2021-02-02 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The essential introduction to the principles and applications of feedback systems—now fully revised and expanded This textbook covers the mathematics needed to model, analyze, and design feedback systems. Now more user-friendly than ever, this revised and expanded edition of Feedback Systems is a one-volume resource for students and researchers in mathematics and engineering. It has applications across a range of disciplines that utilize feedback in physical, biological, information, and economic systems. Karl Åström and Richard Murray use techniques from physics, computer science, and operations research to introduce control-oriented modeling. They begin with state space tools for analysis and design, including stability of solutions, Lyapunov functions, reachability, state feedback observability, and estimators. The matrix exponential plays a central role in the analysis of linear control systems, allowing a concise development of many of the key concepts for this class of models. Åström and Murray then develop and explain tools in the frequency domain, including transfer functions, Nyquist analysis, PID control, frequency domain design, and robustness. Features a new chapter on design principles and tools, illustrating the types of problems that can be solved using feedback Includes a new chapter on fundamental limits and new material on the Routh-Hurwitz criterion and root locus plots Provides exercises at the end of every chapter Comes with an electronic solutions manual An ideal textbook for undergraduate and graduate students Indispensable for researchers seeking a self-contained resource on control theory
Download or read book A New Approach for Robust Internal Model Control of Nonlinear Systems written by Basil Hamed and published by . This book was released on 2011-11 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Reaction Wheel Pendulum written by Daniel J. Block and published by Morgan & Claypool Publishers. This book was released on 2007-12-01 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph describes the Reaction Wheel Pendulum, the newest inverted-pendulum-like device for control education and research. We discuss the history and background of the reaction wheel pendulum and other similar experimental devices. We develop mathematical models of the reaction wheel pendulum in depth, including linear and nonlinear models, and models of the sensors and actuators that are used for feedback control. We treat various aspects of the control problem, from linear control of themotor, to stabilization of the pendulum about an equilibrium configuration using linear control, to the nonlinear control problem of swingup control. We also discuss hybrid and switching control, which is useful for switching between the swingup and balance controllers. We also discuss important practical issues such as friction modeling and friction compensation, quantization of sensor signals, and saturation. This monograph can be used as a supplement for courses in feedback control at the undergraduate level, courses in mechatronics, or courses in linear and nonlinear state space control at the graduate level. It can also be used as a laboratory manual and as a reference for research in nonlinear control.
Download or read book CONTROL ENGINEERING written by M. N. BANDYOPADHYAY and published by PHI Learning Pvt. Ltd.. This book was released on 2002-01-01 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive introduction to the subject of control engineering. Both continuous- and discrete-time control systems are treated, although the emphasis is on continuous-time systems. A chapter each is devoted to in-depth analysis of non-linear control systems, control system components, and optimal control theory. The book also introduces students to the modern concepts of neural fuzzy and adaptive learning systems.
Download or read book Advanced Control Engineering written by Roland Burns and published by Butterworth-Heinemann. This book was released on 2001-11-07 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Control Engineering provides a complete course in control engineering for undergraduates of all technical disciplines. Included are real-life case studies, numerous problems, and accompanying MatLab programs.
Download or read book Control Engineering written by László Keviczky and published by Springer. This book was released on 2018-10-04 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers fundamental information on the analysis and synthesis of continuous and sampled data control systems. It includes all the required preliminary materials (from mathematics, signals and systems) that are needed in order to understand control theory, so readers do not have to turn to other textbooks. Sampled data systems have recently gained increasing importance, as they provide the basis for the analysis and design of computer-controlled systems. Though the book mainly focuses on linear systems, input/output approaches and state space descriptions are also provided. Control structures such as feedback, feed forward, internal model control, state feedback control, and the Youla parameterization approach are discussed, while a closing section outlines advanced areas of control theory. Though the book also contains selected examples, a related exercise book provides Matlab/Simulink exercises for all topics discussed in the textbook, helping readers to understand the theory and apply it in order to solve control problems. Thanks to this combination, readers will gain a basic grasp of systems and control, and be able to analyze and design continuous and discrete control systems.
Download or read book Fractional Modeling and Controller Design of Robotic Manipulators written by Abhaya Pal Singh and published by Springer Nature. This book was released on 2020-10-15 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book at hand is an appropriate addition to the field of fractional calculus applied to control systems. If an engineer or a researcher wishes to delve into fractional-order systems, then this book has many collections of such systems to work upon, and this book also tells the reader about how one can convert an integer-order system into an appropriate fractional-order one through an efficient and simple algorithm. If the reader further wants to explore the controller design for the fractional-order systems, then for them, this book provides a variety of controller design strategies. The use of fractional-order derivatives and integrals in control theory leads to better results than integer-order approaches and hence provides solid motivation for further development of control theory. Fractional-order models are more useful than the integer-order models when accuracy is of paramount importance. Real-time experimental validation of controller design strategies for the fractional-order plants is available. This book is beneficial to the academic institutes for postgraduate and advanced research-level that need a specific textbook on fractional control and its applications in srobotic manipulators. The book is also a valuable teaching and learning resource for undergraduate and postgraduate students.
Download or read book Motion Control of Underactuated Mechanical Systems written by Javier Moreno-Valenzuela and published by Springer. This book was released on 2017-07-11 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is the first to present a unified perspective on the control of underactuated mechanical systems. Based on real-time implementation of parameter identification, this book provides a variety of algorithms for the Furuta pendulum and the inertia wheel pendulum, which are two-degrees-of-freedom mechanical systems. Specifically, this work addresses and solves the problem of motion control via trajectory tracking in one joint coordinate while another joint is regulated. Besides, discussions on extensions to higher degrees-of-freedom systems are given. The book, aimed at control engineers as well as graduate students, ranges from the problem of parameter identification of the studied systems to the practical implementation of sophisticated motion control algorithms. Offering real-world solutions to manage the control of underactuated systems, this book provides a concise tutorial on recent breakthroughs in the field, original procedures to achieve bounding of the error trajectories, convergence and gain tuning guidelines.
Download or read book Optimal Control Systems written by D. Subbaram Naidu and published by CRC Press. This book was released on 2018-10-03 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: The theory of optimal control systems has grown and flourished since the 1960's. Many texts, written on varying levels of sophistication, have been published on the subject. Yet even those purportedly designed for beginners in the field are often riddled with complex theorems, and many treatments fail to include topics that are essential to a thorough grounding in the various aspects of and approaches to optimal control. Optimal Control Systems provides a comprehensive but accessible treatment of the subject with just the right degree of mathematical rigor to be complete but practical. It provides a solid bridge between "traditional" optimization using the calculus of variations and what is called "modern" optimal control. It also treats both continuous-time and discrete-time optimal control systems, giving students a firm grasp on both methods. Among this book's most outstanding features is a summary table that accompanies each topic or problem and includes a statement of the problem with a step-by-step solution. Students will also gain valuable experience in using industry-standard MATLAB and SIMULINK software, including the Control System and Symbolic Math Toolboxes. Diverse applications across fields from power engineering to medicine make a foundation in optimal control systems an essential part of an engineer's background. This clear, streamlined presentation is ideal for a graduate level course on control systems and as a quick reference for working engineers.
Download or read book Simulation of Dynamic Systems with MATLAB and Simulink written by Harold Klee and published by CRC Press. This book was released on 2018-02-02 with total page 852 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continuous-system simulation is an increasingly important tool for optimizing the performance of real-world systems. The book presents an integrated treatment of continuous simulation with all the background and essential prerequisites in one setting. It features updated chapters and two new sections on Black Swan and the Stochastic Information Packet (SIP) and Stochastic Library Units with Relationships Preserved (SLURP) Standard. The new edition includes basic concepts, mathematical tools, and the common principles of various simulation models for different phenomena, as well as an abundance of case studies, real-world examples, homework problems, and equations to develop a practical understanding of concepts.
Download or read book Linear State Space Control Systems written by Robert L. Williams, II and published by John Wiley & Sons. This book was released on 2007-02-09 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book blends readability and accessibility common to undergraduate control systems texts with the mathematical rigor necessary to form a solid theoretical foundation. Appendices cover linear algebra and provide a Matlab overivew and files. The reviewers pointed out that this is an ambitious project but one that will pay off because of the lack of good up-to-date textbooks in the area.
