Download or read book Recent Researches in Corrosion Evaluation and Protection written by Reza Shoja Razavi and published by BoD – Books on Demand. This book was released on 2012-01-25 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to present and discuss the recent methods in corrosion evaluation and protection. The book contains six chapters. The aim of Chapter 1 is to demonstrate that Electrochemical Impedance Spectroscopy can be a very useful tool to provide a complete evaluation of the corrosion protection properties of electro-coatings. Chapter 2 presents results of studies of materials degradation from experimental electrochemical tests and theoretical calculations. Chapter 3 deals with the presentation of the corrosion and corrosion prevention of the aluminum alloys by organic coatings and inhibitors. Chapter 4 addresses the new method of pigment preparation that can improve protection efficiency. The effectiveness of plasma deposited films on the improvement of carbon steel corrosion resistance is discussed in Chapter 5. Chapter 6 deals with the conjugation of carbon nanotubes with organic-inorganic hybrid to prepare hybrid coatings that combine high anti-corrosion efficiency with elevated mechanical resistance.
Download or read book Recent Developments in Analytical Techniques for Corrosion Research written by Ihsan ulhaq Toor and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a wide range of advanced analytical tools, from electrochemical to in-situ/ex-situ material characterization techniques, as well as the modeling of corrosion systems to foster understanding and prediction. When used properly, these tools can enrich our understanding of material performance (metallic materials, coatings, inhibitors) in various environments/contexts (aqueous corrosion, high-temperature corrosion). The book encourages researchers to develop new corrosion-resistant materials and supports them in devising suitable asset integrity strategies. Offering a valuable resource for researchers, industry professionals, and graduate students alike, the book shows them how to apply these valuable analytical tools in their work. .
Download or read book Developments in Corrosion Protection written by Mahmood Aliofkhazraei and published by BoD – Books on Demand. This book was released on 2014-02-20 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the first thing that comes to your mind after hearing the term “corrosion” is corrosion of a metal. Corrosion is a basically harmful phenomenon, but it can be useful in some cases. For instance, environment’s pollution with corrosion products and damage to the performance of a system are among its harmful effects, whereas electric energy generation in a battery and cathodic protection of many structures are among its advantages. However, these advantages are almost nothing as compared to the costs and effects imposed by its detrimental influences. The enormous costs of this phenomenon can be better understand through studying the published statistics on direct and indirect corrosion damages on economy of governments. The direct cost of corrosion is near 3 % of the gross domestic product (GDP) of USA. Considering this huge cost, it is necessary to develop and expand the corrosion science and its protection technologies.
Download or read book Corrosion Analysis written by Michael Dornbusch and published by CRC Press. This book was released on 2018-10-09 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book gives an overview about all relevant electrochemical and spectroscopic methods used in corrosion research. Besides the correct use and interpretation, the methods are correlated with industrial test methods for organic coatings and conversion layers.
Download or read book Corrosion and Protection of Materials written by Marina Cabrini and published by MDPI. This book was released on 2021-04-06 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains thirty articles on various topics related to the corrosion and protection of metallic materials. This topic is of strong actuality both due to the aging of plants and infrastructures that require checks and maintenance, and to the use of traditional materials in increasingly aggressive environments, added to the need of changing the current anti-corrosion systems with less environmental impact methods. Finally, the new development of innovative materials, such as additive manufacturing or high-entropy alloys, needs the characterization of their corrosion behavior. In this issue, there are works on new alloys obtained for additive manufacturing or high entropy, on the study of corrosion and stress corrosion cracking and hydrogen embrittlement mechanisms, through electrochemical and microscopical techniques, studies on low environmental impact inhibitors and biocides, as well as ceramic and metal protective coatings. Finally, there are works on the study of the residual mechanical resistance of corroded infrastructures and on monitoring and non-destructive control. In this way, the book therefore offers a somewhat varied panorama of research trends in the field.
Download or read book Research Opportunities in Corrosion Science and Engineering written by National Research Council and published by National Academies Press. This book was released on 2011-01-27 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of corrosion science and engineering is on the threshold of important advances. Advances in lifetime prediction and technological solutions, as enabled by the convergence of experimental and computational length and timescales and powerful new modeling techniques, are allowing the development of rigorous, mechanistically based models from observations and physical laws. Despite considerable progress in the integration of materials by design into engineering development of products, corrosion considerations are typically missing from such constructs. Similarly, condition monitoring and remaining life prediction (prognosis) do not at present incorporate corrosion factors. Great opportunities exist to use the framework of these materials design and engineering tools to stimulate corrosion research and development to achieve quantitative life prediction, to incorporate state-of-the-art sensing approaches into experimentation and materials architectures, and to introduce environmental degradation factors into these capabilities. Research Opportunities in Corrosion Science and Engineering identifies grand challenges for the corrosion research community, highlights research opportunities in corrosion science and engineering, and posits a national strategy for corrosion research. It is a logical and necessary complement to the recently published book, Assessment of Corrosion Education, which emphasized that technical education must be supported by academic, industrial, and government research. Although the present report focuses on the government role, this emphasis does not diminish the role of industry or academia.
Download or read book Intelligent Coatings for Corrosion Control written by Atul Tiwari and published by Butterworth-Heinemann. This book was released on 2014-10-25 with total page 747 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intelligent Coatings for Corrosion Control covers the most current and comprehensive information on the emerging field of intelligent coatings. The book begins with a fundamental discussion of corrosion and corrosion protection through coatings, setting the stage for deeper discussion of the various types of smart coatings currently in use and in development, outlining their methods of synthesis and characterization, and their applications in a variety of corrosion settings. Further chapters provide insight into the ongoing research, current trends, and technical challenges in this rapidly progressing field. - Reviews fundamentals of corrosion and coatings for corrosion control before delving into a discussion of intelligent coatings—useful for researchers and grad students new to the subject - Covers the most current developments in intelligent coatings for corrosion control as presented by top researchers in the field - Includes many examples of current and potential applications of smart coatings to a variety of corrosion problems
Download or read book Novel Anti Corrosion and Anti Fouling Coatings and Thin Films written by Hari Murthy and published by John Wiley & Sons. This book was released on 2024-10-01 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanomaterials and nanocomposite materials have been developed as corrosion inhibitors and are the most noble and effective alternatives to traditional organic corrosion inhibitors. Nanomaterials provide reasonably high anticorrosive activity in both aqueous and solution phases. A unified approach to this task is lacking, however, which highlights the role of all disciplines involved in the creation and use of corrosion protection coatings for metals. Fouling is the process of accumulating unwanted material that is mostly non-living and comprised of detritus and organic or inorganic compounds, or organisms, such as tiny viruses up to giant kelps. This book covers both the processes of biofouling and anti(bio)fouling, and the devices that stop the biofouling process. This book provides a missing synopsis by providing an understanding of the anticorrosive and anti-biofouling effects of nanomaterials and nanocomposites under different environments. It features an up-to-date picture of the quality and chemistry of a substrate surface, its proper preparation by conversion treatment, the function of resins and anticorrosive pigments in paints, and novel concepts for corrosion protection.
Download or read book Advances in Nanostructured Composites written by Mahmood Aliofkhazraei and published by CRC Press. This book was released on 2019-07-25 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first volume of this book covered Section I: Introduction to Nanocomposites Fabrication and Section II: CNT and Graphene Nanocomposites. The present second volume covers Section III: Recent Applications of Nanocomposites. The second volume aims to provide a guide for different applications of modern nanocomposites especially those fabricated by carbon nanotubes and graphene. The book makes a comparative study of fiber-reinforced composites which have been embedded into the matrix with nanocomposites containing nanotubes in place of fibers. The main topics of this volume are: Electrochemical Properties of Nanoporous Based Materials, Fabrication and Application of Graphene Oxide-based Metal and Metal Oxide Nanocomposites, Electrochemical Sensors/Biosensors Based on Carbon Aerogels/Xerogels, Advances in Nanobiocatalysis: Strategies for Lipase Immobilization and Stabilization, Metal Oxide Based Heterojunction Nanoscale Materials for Chemiresistive Gas Sensors, Recent Advances in Polymer Nanocomposite Coatings for Corrosion Protection, Recent Advances in the Design of Nanocomposite Materials via Laser Techniques for Biomedical Applications, Carbonaceous Nanostructured Composites for Electrochemical Power Sources: Fuel Cells, Supercapacitors and Batteries, Bismuth Vanadate Based Nanostructured and Nanocomposite Photocatalyst Materials for Water Splitting Application.
Download or read book Review of the Bureau of Reclamation s Corrosion Prevention Standards for Ductile Iron Pipe written by National Research Council and published by National Academies Press. This book was released on 2009-11-19 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ductile iron pipe (DIP) was introduced about 50 years ago as a more economical and better-performing product for water transmission and distribution. As with iron or steel pipes, DIP is subject to corrosion, the rate of which depends on the environment in which the pipe is placed. Corrosion mitigation protocols are employed to slow the corrosion process to an acceptable rate for the application. When to use corrosion mitigation systems, and which system, depends on the corrosivity of the soils in which the pipeline is buried. The Bureau of Reclamation's specification for DIP in highly corrosive soil has been contested by some as an overly stringent requirement, necessitating the pipe to be modified from its as-manufactured state and thereby adding unnecessary cost to a pipeline system. This book evaluates the specifications in question and presents findings and recommendations. Specifically, the authoring committee answers the following questions: Does polyethylene encasement with cathodic protection work on ductile iron pipe installed in highly corrosive soils? Will polyethylene encasement and cathodic protection reliably provide a minimum service life of 50 years? What possible alternative corrosion mitigation methods for DIP would provide a service life of 50 years?
Download or read book Advanced Applications of Ionic Liquids written by Jamal Akhter Siddique and published by Elsevier. This book was released on 2022-11-02 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Applications of Ionic Liquids discusses the intersection of nanotechnology with ionic liquids (ILs) and materials, along with opportunities for advanced engineering applications in various research fields. Novel materials at nano scales with ILs creates an upsurge in the thermal and electrochemical constancy of the nano scale particles, making them ideal for industrial applications. The implementation of ILs at nano scale includes an interaction of constituents, which is beneficial for electron transfer reactions. These new composites can be implemented as sensors, electronics, catalysts and photonics. Including ILs in polymer composites enhance electrochemical consistency, govern particle size, upsurge conductivity, reduce toxicity, and more. This book is a comprehensive reference for researchers working with IL based technologies for environmental and energy applications. - Covers all industrial aspects and advanced applications of ionic liquids (ILs) - Discusses the advanced applications of ILs across multiple fields, including industrial chemistry and chemical engineering - Includes a discussion of the use of ionic liquids in functional polymers, with applications for catalysis, energy conservation, sensors, and more
Download or read book Nanoindentation in Materials Science written by Jiri Nemecek and published by BoD – Books on Demand. This book was released on 2012-10-17 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnologies have already attracted massive interest in multiple fields of science and industry. In the past decades, we have witnessed the progress in micro-level experimental techniques that revolutionize the material science. Designing new materials based on the knowledge of mechanics of their building blocks and microstructure manipulations at nanometer scale have become a reality. Nanoindentation, as a leading micro-level mechanical testing technique, has attracted wide attention in numerous research fields and applications. Nowadays, an extensive variety of testing areas ranging from classical thin coatings in machinery engineering, electronics and composites to far fields of civil engineering, biomechanics, implantology or even agriculture can be covered with this universal testing tool. The book aims to be a walk through achievements in some of the distant fields and to give a brief overview of the current frontiers in nanoindentation. Although it is not possible to cover the whole width of the possible themes in one book, it is believed that the reader will benefit from the topics variety and the book will serve as a useful source of literature references.
Download or read book Study and Investigations of Use of Materials and New Designs and Methods in Public Works written by United States. Congress. Senate. Committee on Public Works and published by . This book was released on 1962 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electrodeposition of Composite Materials written by A.M.A Mohamed and published by BoD – Books on Demand. This book was released on 2016-03-23 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanocomposite coatings have various properties that can be utilized for corrosion protection and tribological improvements. Synthesis of the nanocomposite coatings using an electrodeposition method allows unique control of the experimental parameters. By fine tuning the experimental parameters, various compositions and properties can be obtained for the nanocomposite coatings. This book covers some of the electrochemical methods used for nanocomposite coating deposition as well as discusses in detail examples of several nanocomposite coating. The corrosion and tribological performance of the nanocomposite coatings are also covered and some nanocomposite coatings are discussed for specific technological areas, such as fuel cells and microelectronics.
Download or read book Journal of Research of the National Bureau of Standards written by United States. National Bureau of Standards and published by . This book was released on 1977 with total page 1046 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book New Pigments and Additives for Corrosion Protection by Organic Coatings written by Flavio Deflorian and published by Frontiers Media SA. This book was released on 2020-12-11 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: This eBook is a collection of articles from a Frontiers Research Topic. Frontiers Research Topics are very popular trademarks of the Frontiers Journals Series: they are collections of at least ten articles, all centered on a particular subject. With their unique mix of varied contributions from Original Research to Review Articles, Frontiers Research Topics unify the most influential researchers, the latest key findings and historical advances in a hot research area! Find out more on how to host your own Frontiers Research Topic or contribute to one as an author by contacting the Frontiers Editorial Office: frontiersin.org/about/contact.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1978 with total page 1018 pages. Available in PDF, EPUB and Kindle. Book excerpt:
