Download or read book Science and Application of Nanotubes written by D. Tománek and published by Springer Science & Business Media. This book was released on 2005-12-17 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: This series of books, which is published at the rate of about one per year, addresses fundamental problems in materials science. The contents cover a broad range of topics from small clusters of atoms to engineering materials and involve chemistry, physics, materials science, and engineering, with length scales ranging from Ångstroms up to millimeters. The emphasis is on basic science rather than on applications. Each book focuses on a single area of current interest and brings together leading experts to give an up-to-date discussion of their work and the work of others. Each article contains enough references that the interested reader can access the relevant literature. Thanks are given to the Center for Fundamental Materials Research at Michigan State University for supporting this series. M. F. Thorpe, Series Editor E-mail: thorpe@pa. msu. edu East Lansing, Michigan V PREFACE It is hard to believe that not quite ten years ago, namely in 1991, nanotubes of carbon were discovered by Sumio Iijima in deposits on the electrodes of the same carbon arc apparatus that was used to produce fullerenes such as the “buckyball”. Nanotubes of carbon or other materials, consisting ofhollow cylinders that are only a few nanometers in diameter, yet up to millimeters long, are amazing structures that self-assemble under extreme conditions. Their quasi-one-dimensional character and virtual absence of atomic defects give rise to a plethora of unusual phenomena.
Download or read book Green Nanotechnology written by Marcelo Larramendy and published by BoD – Books on Demand. This book was released on 2016-06-01 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, Green Nanotechnology - Overview and Further Prospects, is intended to provide an overview and practical examples of the use of nanomaterials in the new scientific challenges of the green nanotechnology world. We aimed to compile information from a diversity of sources into a single volume to give some real examples, extending the concept that green nanotechnology is far from being a scientific conundrum, and instead a real answer to some of the actual problems the whole planet is dealing with.
Download or read book Refractory Metal Systems written by Günter Effenberg and published by Springer Science & Business Media. This book was released on 2010-01-12 with total page 647 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 11 of group IV presents phase diagrams, crystallographic and thermodynamic data of ternary alloy systems. The subvolume E deals with refractory metal systems, with part 2 considering selected systems from B-Mo-Ni to C-Ta-Ti. At ambient pressure the equilibria of each individual ternary system are discussed as functions of temperature yielding spatial diagrams whose sections and projections are displayed. The phase equilibria are described in terms of liquidus, solidus and solvus projections, isothermal, vertical and quasibinary sections. Data on invariant equilibria are generally given in the form of tables and reaction schemes. The volume forms a comprehensive review and rigorous systematization of the presently available data. For each system the often conflicting literature and contradictory information has been thoroughly evaluated by a team of experts, MSIT, and can thus be presented in a standard format. Back to the year 1900 the literature has been reviewed, implying possible reinterpretations from today's state of knowledge, and incorporated in the volume. The tables and diagrams are preceded by descriptive commenting texts.
Download or read book Colloids and Colloid Assemblies written by Frank Caruso and published by John Wiley & Sons. This book was released on 2006-12-13 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by outstanding experts in the colloids field, this book deals with the recent developments in the synthesis, modification, utilization and application of colloids. The types covered range from metal nanoparticles through to inorganic particles and polymer latexes. Strategies for their modification to impart new properties will be outlined and ordered assemblies derived from colloid particles and some applications for colloids are shown. A multidisciplinary audience spread throughout academia and industry alike will certainly appreciate this first concise collection of knowledge in book form for this topic.
Download or read book Environmental Microbiology and Biotechnology written by Anoop Singh and published by Springer Nature. This book was released on 2020-09-23 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides up-to-date information on the state of the art in applications of biotechnological and microbiological tools for protecting the environment. Written by leading international experts, it discusses potential applications of biotechnological and microbiological techniques in solid waste management, wastewater treatment, agriculture, energy and environmental health. This first volume of the book “Environmental Microbiology and Biotechnology,” covers three main topics: Solid waste management, Agriculture utilization and Water treatment technology, exploring the latest developments from around the globe regarding applications of biotechnology and microbiology for converting wastes into valuable products and at the same time reducing the environmental pollution resulting from disposal. Wherever possible it also includes real-world examples. Further, it offers advice on which procedures should be followed to achieve satisfactory results, and provides insights that will promote the transition to the sustainable utilization of various waste products.
Download or read book Nanotechnology in a Nutshell written by Christian Ngô and published by Springer Science & Business Media. This book was released on 2014-01-04 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new high-level book for professionals from Atlantis Press providing an overview of nanotechnologies now and their applications in a broad variety of fields, including information and communication technologies, environmental sciences and engineering, societal life, and medicine, with provision of customized treatments. The book shows where nanotechnology is now - a fascinating time when the science is transitioning into complex systems with impact on new products. Present and future developments are addressed, as well as a larger number of new industrial and research opportunities deriving from this domain. An overview for professionals, researchers and policy-makers of this very rapidly expanding field. Brief chapters and colour figures with a contained overall length make the book attractive at an attractive price - a must for every professional’s shelf. Mihail C. Roco, National Science Foundation and National Nanotechnology Initiative, wrote the preface underlying the importance and weight of the present book to this exciting and epoch-awakening field of research and applications: “Nanotechnology is well recognized as a science and technology megatrend for the beginning of the 21st century. This book aims to show where nanotechnology is now - transitioning to complex systems and fundamentally new products - and communicates the societal promise of nanotechnology to specialists and the public. Most of what has already made it into the marketplace is in the form of “First Generation” products, passive nanostructures with steady behaviour. Many companies have “Second Generation” products, active nanostructures with changing behaviour during use, and embryonic “Third Generation” products, including 3-dimensional nanosystems. Concepts for “Fourth Generation” products, including heterogeneous molecular nanosystems, are only in research.”
Download or read book Nanomaterials in Biofuels Research written by Manish Srivastava and published by Springer. This book was released on 2021-08-26 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: As renewable energy sources, biofuels have tremendous potential to replace fossil fuels in future energy scenarios, offering green alternative energy sources. However, though such fuels could mean a significant reduction in environmental pollution, they are still far from practical implementation due to their high production costs and technical issues. Consequently, efforts are being made around the globe to achieve the cost-effective production of biofuels. In this context, the use of nanomaterials to improve biofuels production efficiency is a vital, emerging area. Nanomaterials are attracting attention due to their versatile physicochemical properties and may improve the production process for various biofuels by acting as catalysts. However, this area is still in its infancy. To improve the practical viability of the biofuels production process, it is essential to focus on the specific type of nanomaterial used, its synthesis, and its specific effects on the process parameters. This book explores the potential advantages and feasibility of various aspects of nanomaterials with regard to improving the current biofuels production process, making it a valuable resource for a broad readership.
Download or read book Biomass for Renewable Energy Fuels and Chemicals written by Donald L. Klass and published by Elsevier. This book was released on 1998-07-06 with total page 669 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomass for Renewable Energy, Fuels, and Chemicals serves as a comprehensive introduction to the subject for the student and educator, and is useful for researchers who are interested in the technical details of biomass energy production. The coverage and discussion are multidisciplinary, reflecting the many scientific and engineering disciplines involved. The book will appeal to a broad range of energy professionals and specialists, farmers and foresters who are searching for methods of selecting, growing, and converting energy crops, entrepreneurs who are commercializing biomass energy projects, and those involved in designing solid and liquid waste disposal-energy recovery systems. Presents a graduated treatment from basic principles to the details of specific technologies Includes a critical analysis of many biomass energy research and commercialization activities Proposes several new technical approaches to improve efficiencies, net energy production, and economics Reviews failed projects, as well as successes, and methods for overcoming barriers to commercialization Written by a leader in the field with 40 years of educational, research, and commercialization experience
Download or read book Nanoparticles and Catalysis written by Didier Astruc and published by John Wiley & Sons. This book was released on 2008-06-25 with total page 663 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by international experts, this monograph combines two of the most important aspects of modern chemistry, presenting the latest knowledge on these environmental friendly applications. This result is a comprehensive overview of the application of nanoparticles in catalysis, focusing on synthesis and the most important reaction types, providing all the information needed by catalytic, organic and solid state chemists, as well as those working with or on organometallics, materials scientists, and chemists in industry.
Download or read book Electronic Properties of Carbon Nanotubes written by Leroy Sidney and published by . This book was released on 2016-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes (CNTs) are tubular cylinders of carbon atoms that have extraordinary mechanical, electrical, thermal, optical and chemical properties. CNTs typically have diameters ranging from 1 nanometer (nm) up to 50 nma nanometer is one thousand millionth of a meter. Typical CNT lengths are several micronsseveral thousand nanometers long; by contrast, Nanocomp's produced fibers are measured in millimetersthousands of times longer than all other commercially produced CNTs. They take the form of cylindrical carbon molecules and have novel properties that make them potentially useful in a wide variety of applications in nanotechnology, electronics, optics and other fields of materials science. They exhibit extraordinary strength and unique electrical properties, and are efficient conductors of heat. In the powdery format offered by all CNT producers (but for NTI), applications are limited to the properties possible by this form factore.g. additive active ingredients in semiconductors, liquid crystal displays (LCDs), sensors, and other uses in which these powders add some level of functional performance. Due to its fiber length and its form factors, NTI delivers strength and conductivity unlike any other commercial CNT producer, and so can address a much broader array of applications for which its material rivals copper and aluminum in conductivity, and steel, aluminum, carbon fibers and glass composites where strength and lightweight matter. Carbon nanotubes have been a subject of exhaustive research for a wide range of applications. The purpose of this book entitled Properties of Carbon Nanotubes is to give in-depth understanding of the physics and electronic structure of carbon nanotubes. This book discusses fabrication techniques followed by an analysis on the physical properties of carbon nanotubes, including density of states and electronic structures. Eventually, the book follows a significant amount of work in the industry applications of carbon nanotubes.
Download or read book A Power Plant Primer for District Energy Systems written by Randal W. Collins and published by Lulu.com. This book was released on 2015-12-04 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an introduction to Central Utility Systems concepts, theories, components and some operations practices. In addition to introducing plant operators to the very basic level of knowledge needed to understand the plant, the best fit for this book may be for those who have some duties in and around the plant and could benefit from some of the basic terms and definitions supplied here. The book focuses on District Energy Systems, but applies to virtually any boiler or steam plant and the systems they use to operate safely and efficiently. The strongest value that this book will bring is a common language as every reader will have the ability to understand the terms and phrases used in and about the plant.
Download or read book Encyclopedia of Chemical Processing written by Sunggyu Lee and published by Taylor & Francis US. This book was released on 2006 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supplying nearly 350 expertly-written articles on technologies that can maximize and enhance the research and production phases of current and emerging chemical manufacturing practices and techniques, this second edition provides gold standard articles on the methods, practices, products, and standards recently influencing the chemical industries. New material includes: design of key unit operations involved with chemical processes; design, unit operation, and integration of reactors and separation systems; process system peripherals such as pumps, valves, and controllers; analytical techniques and equipment; current industry practices; and pilot plant design and scale-up criteria.
Download or read book Chemicals from Biomass written by Debalina Sengupta and published by CRC Press. This book was released on 2012-07-05 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemicals from Biomass: Integrating Bioprocesses into Chemical Production Complexes for Sustainable Development helps engineers optimize the development of new chemical and polymer plants that use renewable resources to replace the output of goods and services from existing plants. It also discusses the conversion of those existing plants into faci
Download or read book International Conference on the Physics of Reactors 2008 PHYSOR 2008 written by Rakesh Chawla and published by . This book was released on 2008 with total page 3389 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Processing of Waste written by and published by Bookboon. This book was released on with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Smart Structures and Materials 2004 written by Yoseph Bar-Cohen and published by SPIE-International Society for Optical Engineering. This book was released on 2004 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of SPIE present the original research papers presented at SPIE conferences and other high-quality conferences in the broad-ranging fields of optics and photonics. These books provide prompt access to the latest innovations in research and technology in their respective fields. Proceedings of SPIE are among the most cited references in patent literature.
Download or read book Selective Oxidation Processes written by American Chemical Society. Division of Petroleum Chemistry and published by . This book was released on 1965 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:
