Download or read book Radio frequency MOSFET Modeling and Characterization written by Ingrid Ma and published by . This book was released on 1997 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CMOS RF Modeling Characterization and Applications written by M. Jamal Deen and published by World Scientific. This book was released on 2002 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: CMOS technology has now reached a state of evolution, in terms of both frequency and noise, where it is becoming a serious contender for radio frequency (RF) applications in the GHz range. Cutoff frequencies of about 50 GHz have been reported for 0.18 æm CMOS technology, and are expected to reach about 100 GHz when the feature size shrinks to 100 nm within a few years. This translates into CMOS circuit operating frequencies well into the GHz range, which covers the frequency range of many of today's popular wireless products, such as cell phones, GPS (Global Positioning System) and Bluetooth. Of course, the great interest in RF CMOS comes from the obvious advantages of CMOS technology in terms of production cost, high-level integration, and the ability to combine digital, analog and RF circuits on the same chip. This book discusses many of the challenges facing the CMOS RF circuit designer in terms of device modeling and characterization, which are crucial issues in circuit simulation and design.
Download or read book Modeling and Characterization of RF and Microwave Power FETs written by Peter Aaen and published by Cambridge University Press. This book was released on 2007-06-25 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive exposition of FET modeling, and is a must-have resource for seasoned professionals and new graduates in the RF and microwave power amplifier design and modeling community. In it, you will find descriptions of characterization and measurement techniques, analysis methods, and the simulator implementation, model verification and validation procedures that are needed to produce a transistor model that can be used with confidence by the circuit designer. Written by semiconductor industry professionals with many years' device modeling experience in LDMOS and III-V technologies, this was the first book to address the modeling requirements specific to high-power RF transistors. A technology-independent approach is described, addressing thermal effects, scaling issues, nonlinear modeling, and in-package matching networks. These are illustrated using the current market-leading high-power RF technology, LDMOS, as well as with III-V power devices.
Download or read book MOSFET RF Characterization Using Bulk and SOI CMOS Technologies written by Jan Saijets and published by . This book was released on 2007 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: MOSFET radio-frequency characterization and modeling is studied, both with SOI CMOS and bulk CMOS technologies. The network analyzer measurement uncertainties are studied, as is their effect on the small signal parameter extraction of MOS devices. These results can be used as guidelines for designing MOS RF characterization layouts with as small an AC extraction error as possible. The results can also be used in RF model extraction as criteria for required optimization accuracy. Modifications to the digital CMOS model equivalent circuit are studied to achieve better RF behavior for the MOS model. The benefit of absorbing the drain and source parasitic series resistances into the current description is evaluated. It seems that correct high-frequency behavior is not possible to describe using this technique. The series resistances need to be defined extrinsically. Different bulk network alternatives were evaluated using scalable device models up to 10 GHz. Accurate output impedance behavior of the model requires a bulk resistance network. It seems that good accuracy improvement is achieved with just a single bulk resistor. Additional improvement is achieved by increasing the number of resistors to three. At this used frequency range no further accuracy improvement was achieved by increasing the resistor amount over three. Two modeling approaches describing the distributed gate behavior are also studied with different MOS transistor layouts. Both approaches improve the RF characteristics to some extent but with limited device geometry. Both distributed gate models describe well the high frequency device behavior of devices not commonly used at radio frequencies.
Download or read book Characterization and Modeling of SOI RF Integrated Components written by Morin Dehan and published by Presses univ. de Louvain. This book was released on 2003 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: The boom of mobile communications leads to an increasing request of low cost and low power mixed mode integrated circuits. Maturity of SOI technology, and recent progresses of MOSFET's microwave performances, explain the success of silicon as compared to III-V technologies for low-cost multigigahertz analog applications. The design of efficient circuits requires accurate, wide-band models for both active and passive elements. Within this frame, passive and active components fabricated in SOI technologies have been studied. Various topologies of integrated transmission lines, like Coplanar Waveguides or thin film microstrip lines, have been analyzed. Also, a new physical model of integrated inductors has been developed. This model, based on a coupled line analysis of square spiral inductors, is scalable and independent of the technology used. Inductors with various spacing between strips, conductor widths, or number of turns can be simulated on different multi-layered substrates. Each layer that composes the substrate is defined using its electrical properties (permittivity, permeability, conductivity). The performances of integrated sub-micron MOSFETs are analyzed. New alternative structures of transistor (the Graded Channel MOSFET and the Dynamic Threshold MOSFET) are proposed to increase the performances of a CMOS technology for for analog, low power, low voltage, and microwave applications. They are studied from Low to High frequency. The graded channel MOSFET is an asymmetric doped channel MOSFET's which bring solutions for the problems of premature drain break-down, hot carrier effects, and threshold voltage (Vth) roll-off issues in deep submicrometer devices. The GCMOS processing is fully compatible with the conventional SOI MOSFET process flow, with no additional steps needed. The dynamic threshold voltage MOS is a MOS transistor for which the gate and the body channel are tied together. All DTMOS electrical properties can be deduced from standard MOS theory by introducing Vbs = Vgs. The main advantage of DTMOS over conventional MOS is its higher drive current at low bias conditions. To keep the body to source current as low as possible, the body bias voltage must be kept lower than 0.7 V. It seems obvious that the DTMOS transistor is an attractive component for low voltage applications.
Download or read book MOSFET Modeling for Circuit Analysis and Design written by Carlos Galup-Montoro and published by World Scientific. This book was released on 2007 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book dedicated to the next generation of MOSFET models. Addressed to circuit designers with an in-depth treatment that appeals to device specialists, the book presents a fresh view of compact modeling, having completely abandoned the regional modeling approach.Both an overview of the basic physics theory required to build compact MOSFET models and a unified treatment of inversion-charge and surface-potential models are provided. The needs of digital, analog and RF designers as regards the availability of simple equations for circuit designs are taken into account. Compact expressions for hand analysis or for automatic synthesis, valid in all operating regions, are presented throughout the book. All the main expressions for computer simulation used in the new generation compact models are derived.Since designers in advanced technologies are increasingly concerned with fluctuations, the modeling of fluctuations is strongly emphasized. A unified approach for both space (matching) and time (noise) fluctuations is introduced.
Download or read book Modeling and Characterization of RF and Microwave Power FETs written by Aaen Peter H Plau Jaime a Wood John and published by . This book was released on 2014-05-14 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book RF Characterization and Modeling of MOSFET Power Amplifier in Wireless Communication written by Kenneth Kin Pun Tsui and published by . This book was released on 2003 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling and Design Techniques for RF Power Amplifiers written by Arvind Raghavan and published by John Wiley & Sons. This book was released on 2008-01-09 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Achieve higher levels of performance, integration, compactness, and cost-effectiveness in the design and modeling of radio-frequency (RF) power amplifiers RF power amplifiers are important components of any wireless transmitter, but are often the limiting factors in achieving better performance and lower cost in a wireless communication system—presenting the RF IC design community with many challenges. The next-generation technological advances presented in this book are the result of cutting-edge research in the area of large-signal device modeling and RF power amplifier design at the Georgia Institute of Technology, and have the potential to significantly address issues of performance and cost-effectiveness in this area. Richly complemented with hundreds of figures and equations, Modeling and Design Techniques for RF Power Amplifiers introduces and explores the most important topics related to RF power amplifier design under one concise cover. With a focus on efficiency enhancement techniques and the latest advances in the field, coverage includes: Device modeling for CAD Empirical modeling of bipolar devices Scalable modeling of RF MOSFETs Power amplifier IC design Power amplifier design in silicon Efficiency enhancement of RF power amplifiers The description of state-of-the-art techniques makes this book a valuable and handy reference for practicing engineers and researchers, while the breadth of coverage makes it an ideal text for graduate- and advanced undergraduate-level courses in the area of RF power amplifier design and modeling.
Download or read book High Frequency MOSFET Modeling for RF Applications written by Xiaodong Jin and published by . This book was released on 2001 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multigate Transistors for High Frequency Applications written by K. Sivasankaran and published by Springer Nature. This book was released on 2023-03-27 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the evolution of multigate transistors, the design challenges of transistors for high-frequency applications, and the design and modeling of multigate transistors for high-frequency applications. The contents particularly focus on the cut-off frequency and maximum oscillation frequency of different multigate structures. RF stability modeling for multigate transistors is presented, which can help to understand the relation between the small-signal parameter and the physical parameter of the device for optimization. This is a useful reference to those in academia and industry.
Download or read book New Topics in Simulation and Modeling of RF Circuits written by Alexandru Gabriel Gheorghe and published by CRC Press. This book was released on 2022-09-01 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: New Topics in Simulation and Modeling of RF Circuits addresses two main topics: simulation of RF circuits and new models of nonlinear power BAW resonators and filters.Since RF circuits have several unique features, and all analysis methods are based on the circuit essential properties, the book begins by describing the properties of RF circuits, characterization of circuits with customary and uncustomary behavior and some theorems of solutions existence and uniqueness for dynamic nonlinear circuits. Thereafter, the main time domain and frequency domain analysis methods for RF circuits are presented. The advantages and disadvantages of each method have been highlighted, and an algorithm for the time step choice in transient analysis based on energy balance errors is also presented. Lastly, the final part contains some nonlinear circuit models of power BAW resonators. The behavioral models for the time domain analysis are simple circuits containing weakly nonlinear elements. The behavioral models for frequency domain analysis are based on the measured values of the frequency dependent S parameters for a set of incident powers. S parameters corresponding to certain intermodulation products of practical interest are also considered. The physical models contain artificial transmission lines with nonlinear circuit elements corresponding to mechanical and electrical nonlinearities.
Download or read book Characterization and Modeling of Nanoscale MOSFET for Ultra low Power RF IC Design written by Maria-Anna Chalkiadaki and published by . This book was released on 2016 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mots-clés de l'autrice: Advanced CMOS ; Nanoscale Bulk MOSFET ; Low-Power ; Analytical Modeling ; Compact Modeling ; BSIM6 ; RF Small-Signal ; RF Noise ; Parameter Extraction ; IC Design Methodology.
Download or read book Device Modeling for Analog and RF CMOS Circuit Design written by Trond Ytterdal and published by John Wiley & Sons. This book was released on 2003-08-01 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bridges the gap between device modelling and analog circuit design. Includes dedicated software enabling actual circuit design. Covers the three significant models: BSIM3, Model 9 &, and EKV. Presents practical guidance on device development and circuit implementation. The authors offer a combination of extensive academic and industrial experience.
Download or read book MOSFET Technologies for Double Pole Four Throw Radio Frequency Switch written by Viranjay M. Srivastava and published by Springer Science & Business Media. This book was released on 2013-10-07 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides analysis and discusses the design of various MOSFET technologies which are used for the design of Double-Pole Four-Throw (DP4T) RF switches for next generation communication systems. The authors discuss the design of the (DP4T) RF switch by using the Double-Gate (DG) MOSFET, as well as the Cylindrical Surrounding double-gate (CSDG) MOSFET. The effect of HFO2 (high dielectric material) in the design of DG MOSFET and CSDG MOSFET is also explored. Coverage includes comparison of Single-gate MOSFET and Double-gate MOSFET switching parameters, as well as testing of MOSFETs parameters using image acquisition.
Download or read book Performance Optimization Techniques in Analog Mixed Signal and Radio Frequency Circuit Design written by Fakhfakh, Mourad and published by IGI Global. This book was released on 2014-10-31 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Improving the performance of existing technologies has always been a focal practice in the development of computational systems. However, as circuitry is becoming more complex, conventional techniques are becoming outdated and new research methodologies are being implemented by designers. Performance Optimization Techniques in Analog, Mix-Signal, and Radio-Frequency Circuit Design features recent advances in the engineering of integrated systems with prominence placed on methods for maximizing the functionality of these systems. This book emphasizes prospective trends in the field and is an essential reference source for researchers, practitioners, engineers, and technology designers interested in emerging research and techniques in the performance optimization of different circuit designs.
Download or read book Characterization and Modeling of Deep submicron MOSFET s Including Frequency Effects written by Jen Shuang Wong and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
