Download or read book Pulverized coal Flames written by Charles R. McCann and published by . This book was released on 1969 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Pulverized Coal Combustion and Gasification written by L. Smoot and published by Springer. This book was released on 2013-03-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: viii and approaches could be adapted to other coal conversion and combustion problems, we have not considered combustion or gasification in fluidized or fixed beds or in situ processes. In addition, we have not considered other fossil-fuel combustion problems associated with oil shale, tar sands, etc., even though many aspects of pulverized-coal combustion would relate to these problems. For the case of pulverized-coal models, we have attempted to provide a detailed description of the model foundations. Parts I and II of this book emphasize general principles for describing reacting, turbulent or laminar, multiphase systems. General conservation equations are developed and summarized. The basis for computing thermochemical equilibrium in complex, heterogeneous mixtures is presented, together with techniques for rapid computation and reference to required input data. Rate processes are then discussed, including pertinent aspects of turbulence, chemical kinetics, radiative heat transfer, and gas-particle convective-diffusive interactions. Much of Part II deals with parameters and coefficients for describing these complex rate processes. This part of the book provides recommended values of coefficients and parameters for treating complex reacting flows. Parts I and II may well be suitable for use in an advanced course in reacting flows, and have been written partly with that in mind. Part III deals with more specific aspects of pulverized-coal characteristics and rate processes. Following a general description of coal structure and constitution, coal pyrolysis and char oxidation processes are considered.

Download or read book Fundamentals of the Physical Chemistry of Pulverized Coal Combustion written by L Lahaye and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of coal for the production of energy is certainly not a new area of research. Many research works were carried out to improve the efficiency of industrial and domestic facilities. In the sixties, however, because of the availability and low cost of petroleum, coal consumption decreased and the research effort in this area was minimum. Meanwhile, the situation has totally changed. Considering the reserves of oil and the instability ofregions where they are located, it is becoming absolutely necessary to develop other sources of energy.The major alternative to oil appears to be coal, at least for the near future. Indeed, the reserves known today represent several centuries of energy consumption.!t is therefore becoming urgent to develop efficient and non polluting technologies to produce energy from coal. The main possibilities are : · liquefaction · gasification · directed combustion. Research and development efforts on liquefaction have been considerably reduced because of high cost of technologies involved and poor prospects for the next two decades. Research works on gasification are progressing; it is a promising approach. However, direct combustion either in pulverized coal furnaces or in fluidized beds is the more promising way of expanding rapidly the utilization of coal. These techniques are already used in some facilities but many environmental problems remain, slowing down their development.

Download or read book Computational Modeling of Pulverized Coal Fired Boilers written by Vivek V. Ranade and published by CRC Press. This book was released on 2014-12-02 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Harness State-of-the-Art Computational Modeling Tools Computational Modeling of Pulverized Coal Fired Boilers successfully establishes the use of computational modeling as an effective means to simulate and enhance boiler performance. This text factors in how computational flow models can provide a framework for developing a greater understanding of the underlying processes in PC boilers. It also provides a detailed account of the methodology of computational modeling of pulverized coal boilers, as well as an apt approach to modeling complex processes occurring in PC boilers in a manageable way. Connects Modeling with Real-Life Applications Restricted to the combustion side of the boiler (the authors assume some prior background of reaction engineering and numerical techniques), the book describes the individual aspects of combustion and heat recovery sections of PC boilers that can be used to further improve the design methodologies, optimize boiler performance, and solve practical boiler-related problems. The book provides guidelines on implementing the material in commercial CFD solvers, summarizes key points, and presents relevant case studies. It can also be used to model larger boilers based on conventional, super-critical, or ultra-super critical technologies as well as based on oxy-fuel technologies. Consisting of six chapters, this functional text: Provides a general introduction Explains the overall approach and methodology Explores kinetics of coal pyrolysis (devolatilization) and combustion and methods of its evaluation Presents computational flow modeling approach to simulate pulverized coal fired boiler Covers modeling aspects from formulation of model equations to simulation methodology Determines typical results obtained with computational flow models Discusses the phenomenological models or reactor network models Includes practical applications of computational modeling Computational Modeling of Pulverized Coal Fired Boilers explores the potential of computational models for better engineering of pulverized coal boilers, providing an ideal resource for practicing engineers working in utility industries. It also benefits boiler design companies, industrial consultants, R & D laboratories, and engineering scientists/research students.

Download or read book Clean Coal and Sustainable Energy written by Junfu Lyu and published by Springer Nature. This book was released on 2021-09-29 with total page 1091 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the 9th International Symposium on Coal Combustion, held in Qingdao, China in July 2019. It provides the latest research results on techniques for pulverized coal combustion and fluidized bed combustion, low-carbon energy and emission controls, and industrial applications. Highlighting research areas that are of great importance in promoting collaboration between related subjects and the technical development of coal-related fields, the book offers a valuable reference guide for researchers and engineers alike.

Download or read book Mineral Impurities in Coal Combustion written by Erich Raask and published by CRC Press. This book was released on 1985 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Coal Combustion and Gasification written by L.Douglas Smoot and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of coal is required to help satisfy the world's energy needs. Yet coal is a difficult fossil fuel to consume efficiently and cleanly. We believe that its clean and efficient use can be increased through improved technology based on a thorough understanding of fundamental physical and chemical processes that occur during consumption. The principal objective of this book is to provide a current summary of this technology. The past technology for describing and analyzing coal furnaces and combus tors has relied largely on empirical inputs for the complex flow and chemical reactions that occur while more formally treating the heat-transfer effects. GrOWing concern over control of combustion-generated air pollutants revealed a lack of understanding of the relevant fundamental physical and chemical mechanisms. Recent technical advances in computer speed and storage capacity, and in numerical prediction of recirculating turbulent flows, two-phase flows, and flows with chemical reaction have opened new opportunities for describing and modeling such complex combustion systems in greater detail. We believe that most of the requisite component models to permit a more fundamental description of coal combustion processes are available. At the same time there is worldwide interest in the use of coal, and progress in modeling of coal reaction processes has been steady.

Download or read book Coal Combustion Modelling written by Stephen Niksa and published by . This book was released on 1996 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Solid Biofuels for Energy written by Panagiotis Grammelis and published by Springer Science & Business Media. This book was released on 2010-10-22 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fossil fuels are widely used for electricity generation and heating, creating greenhouse gas emissions and other toxic pollutants, which should be minimised according to the most recent environmental legislation. The utilisation of solid fuels with biogenic origin could contribute to the minimisation of these emissions. Solid Biofuels for Energy presents the current status of the engineering disciplines in this specific area, providing an improved background on the energy exploitation options of solid biomass. Within this framework, all thematic priorities related to the solid bioenergy potential and standardisation, commercialised and emerging energy technologies, and quality of solid residues are presented. Special attention has been given to biomass co-firing with coal, since it has the highest potential for commercial application, while combustion and gasification are more promising for units of medium to small scale. This strong practical focus is evident throughout the book, particularly in discussions of: • international standards for solid biofuel specifications; • supply, cost and sustainability of solid biofuels; • technical issues and non-technical barriers in biomass/coal co-firing; and • biomass combustion and gasification characteristics. Solid Biofuels for Energy is an informative reference, written for researchers and postgraduate students working in the field of biomass. It can also be a useful guide for chemical and mechanical engineers, involved in the environment and energy production sectors.

Download or read book High Temperature Air Combustion written by Hiroshi Tsuji and published by CRC Press. This book was released on 2002-12-03 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maximize efficiency and minimize pollution: the breakthrough technology of high temperature air combustion (HiTAC) holds the potential to overcome the limitations of conventional combustion and allow engineers to finally meet this long-standing imperative. Research has shown that HiTAC technology can provide simultaneous reduction of CO2 and nitric

Download or read book Solid Fuel Blending written by David Tillman and published by Elsevier. This book was released on 2012-03-21 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Create affordable solid fuel blends that will burn efficiently while reducing the carbon footprint. Solid Fuel Blending Handbook: Principles, Practices, and Problems describes a new generation of solid fuel blending processes. The book includes discussions on such topics as flame structure and combustion performance, boiler efficiency, capacity as influenced by flue gas volume and temperature, slagging and fouling, corrosion, and emissions. Attention is given to the major types of combustion systems including stokers, pulverized coal, cyclone, and fluidized bed boilers. Specific topics considered include chlorine in one or more coals, alkali metals (e.g., K, Na) and alkali earth elements, and related topics. Coals of consideration include Appalachian, Interior Province, and Western bituminous coals; Powder River Basin (PRB) and other subbituminous coals; Fort Union and Gulf Coast lignites, and many of the off-shore coals (e.g., Adaro coal, an Indonesian subbituminous coal with very low sulfur; other off-shore coals from Germany, Poland, Australia, South Africa, Columbia, and more). Interactions between fuels and the potential for blends to be different from the parent coals will be a critical focus of this of the book. One stop source to solid fuel types and blending processes Evaluate combustion systems and calculate their efficiency Recognize the interactions between fuels and their potential energy output Be aware of the Environmental Aspects of Fuel Blending

Download or read book Optic Diagnostics on Pulverized Coal Particles Combustion Dynamics and Alkali Metal Release Behavior written by Ye Yuan and published by Springer. This book was released on 2019-02-15 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on pulverized coal particle devolatilization, ignition, alkali metal release behavior, and burnout temperature using several novel optic diagnostic methods on a Hencken multi-flat flame burner. Firstly, it presents a novel multi-filter technique to detect the CH* signal during coal ignition, which can be used to characterize the volatile release and reaction process. It then offers observations on the prevalent transition from heterogeneous ignition to hetero-homogeneous ignition due to ambient temperature based on visible light signal diagnostics. By utilizing the gap between the excitation energies of the gas and particle phases, a new low-intensity laser-induced breakdown spectroscopy (PS-LIBS) is developed to identify the presence of sodium in the particle or gas phase along the combustion process. For the first time, the in-situ verification of the gas phase Na release accompanying coal devolatilization is fulfilled when the ambient temperature is high enough. In fact, particle temperature plays a vital role in the coal burnout process and ash particle formation. The last part of the book uses RGB color pyrometry and the CBK model to study the char particle temperature on a Hencken burner. It offers readers valuable information on the technique of coal ignition and combustion diagnostics as well as coal combustion characteristics.

Download or read book Pulverized Coal Combustion and Gasification written by L. Smoot and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: viii and approaches could be adapted to other coal conversion and combustion problems, we have not considered combustion or gasification in fluidized or fixed beds or in situ processes. In addition, we have not considered other fossil-fuel combustion problems associated with oil shale, tar sands, etc., even though many aspects of pulverized-coal combustion would relate to these problems. For the case of pulverized-coal models, we have attempted to provide a detailed description of the model foundations. Parts I and II of this book emphasize general principles for describing reacting, turbulent or laminar, multiphase systems. General conservation equations are developed and summarized. The basis for computing thermochemical equilibrium in complex, heterogeneous mixtures is presented, together with techniques for rapid computation and reference to required input data. Rate processes are then discussed, including pertinent aspects of turbulence, chemical kinetics, radiative heat transfer, and gas-particle convective-diffusive interactions. Much of Part II deals with parameters and coefficients for describing these complex rate processes. This part of the book provides recommended values of coefficients and parameters for treating complex reacting flows. Parts I and II may well be suitable for use in an advanced course in reacting flows, and have been written partly with that in mind. Part III deals with more specific aspects of pulverized-coal characteristics and rate processes. Following a general description of coal structure and constitution, coal pyrolysis and char oxidation processes are considered.

Download or read book Gas Solid Reactions written by Julian Szekely and published by Elsevier. This book was released on 2012-12-02 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas-Solid Reactions describes gas-solid reaction systems, focusing on the four phenomena—external mass transfer, pore diffusion, adsorption/desorption, and chemical reaction. This book consists of eight chapters. After the introduction provided in Chapter 1, the basic components of gas-solid reactions are reviewed in Chapter 2. Chapter 3 describes the reactions of individual nonporous solid particles, while Chapter 4 elaborates the reaction of single porous particles. Solid-solid reactions proceeding through gaseous intermediates are considered in Chapter 5. Chapter 6 deals with the experimental approaches to the study of gas-solid reaction systems. How information on single-particle behavior may be used for the design of multiparticle, large-scale assemblies, and packed- and fluidized-bed reaction systems is deliberated in Chapter 7. The last chapter covers the specific gas-solid reaction systems, including some statistical indices indicating the economic importance of the systems and processes it's based on. This publication is recommended for practicing engineers engaged in process research, development, and design in the many fields where gas-solid reactions are important.

Download or read book Theoretical and Numerical Combustion written by Thierry Poinsot and published by R.T. Edwards, Inc.. This book was released on 2005 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introducing numerical techniques for combustion, this textbook describes both laminar and turbulent flames, addresses the problem of flame-wall interaction, and presents a series of theoretical tools used to study the coupling phenomena between combustion and acoustics. The second edition incorporates recent advances in unsteady simulation methods,

Download or read book Developments in Combustion Technology written by Konstantinos Kyprianidis and published by BoD – Books on Demand. This book was released on 2016-10-05 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past few decades, exciting developments have taken place in the field of combustion technology. The present edited volume intends to cover recent developments and provide a broad perspective of the key challenges that characterize the field. The target audience for this book includes engineers involved in combustion system design, operational planning and maintenance. Manufacturers and combustion technology researchers will also benefit from the timely and accurate information provided in this work. The volume is organized into five main sections comprising 15 chapters overall: - Coal and Biofuel Combustion - Waste Combustion - Combustion and Biofuels in Reciprocating Engines - Chemical Looping and Catalysis - Fundamental and Emerging Topics in Combustion Technology

Download or read book Fundamentals of Pulverised Coal Combustion written by Zhangfa Wu and published by . This book was released on 2005-01-01 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: