Download or read book Pulsed Laser Deposition of Carbide Coatings for Rolling and Sliding Contact Applications written by and published by . This book was released on 2003 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this research program several new concepts were investigated for improving the mechanical and tribological properties of coatings intended for applications subject to repeated rolling and sliding contacts. The investigation focused on four primary areas: 1) alloying carbides to enhance coating hardness, 2) depositing composite carbide-silver coatings for reduced friction in vacuum environments, 3) evaluating carbide-metal nacreous structures for improving coating toughness, and 4) chemical vapor deposition (CVD) methods for nanostructured composite carbide coatings. Results show that, in carbide coatings, additions of silicon can provide a useful and practical route towards improving coating hardness. This is due to the disordering effect of silicon when present in transition metal carbides. Investigation of composite carbide-silver coatings demonstrated their potential as low-friction coatings in vacuum environments. In these coatings, phase separation between carbide and silver allows the silver to act as a solid lubricant, while the carbide matrix improves wear resistance over silver alone. In the third research area, the authors evaluated whether increasing film toughness by using a metal layer in TiC-based films could enhance the wear resistance of such films. Results show that the use of thin (

Download or read book Hard Coatings Based on Borides Carbides and Nitrides written by Ashok Kumar and published by Minerals, Metals, & Materials Society. This book was released on 1998 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances made in coatings based on borides, carbides and nitrides, has lead to an increase in practical applications. The book addresses all aspects of the synthesis of superhard coatings, thin-film characterization, and the use of hard coatings in corrosive and tribological applications.

Download or read book Surface Coatings Technology written by B. D. Sartwell and published by Elsevier. This book was released on 2016-06-03 with total page 981 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface & Coatings Technology, Volume 61 presents the proceeding of the 20th International Conference on Metallurgical Coatings and Thin Films, held in San Diego, California, on April 19–23, 1993. This book discusses a variety of topics related to surface and coatings technology, including coatings for use at high temperature, hard coatings, and vapor deposition technology. Organized into 141 chapters, this compilation of papers begins with an overview of the coating requirements for long-life bucket protection, how each of these coating systems has performed, and the advantages and disadvantages of each. This text then discusses the gradient-free transition step achieved in the element analysis of the depth profiles. Other chapters consider the metastable yttrium oxide films that are synthesized using reactive sputter deposition. This book discusses as well the use of appropriate copper-based alloy coatings on structural components. The final chapter deals with the particle mechanical and thermal behavior in the process of high velocity oxy-fuel spraying. This book is a valuable resource for chemical engineers and metallurgists.

Download or read book Current Research in Pulsed Laser Deposition written by Liviu Duta and published by MDPI. This book was released on 2021-08-30 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite its limitation in terms of surface covered area, the PLD technique still gathers interest among researchers by offering endless possibilities for tuning thin film composition and enhancing their properties of interest due to: (i) the easiness of a stoichiometric transfer even for very complex target materials, (ii) high adherence of the deposited structures to the substrate, (iii) controlled degree of phase, crystallinity, and thickness of deposited coatings, (iv) versatility of the experimental set-up which allows for simultaneous ablation of multiple targets resulting in combinatorial maps or consecutive ablation of multiple targets producing multi-layered structures, and (v) adjustment of the number of laser pulses, resulting in either a spread of nanoparticles, islands of materials or a complete covering of a surface. Moreover, a variation of PLD, known as Matrix Assisted Pulsed Laser Evaporation, allows for deposition of organic materials, ranging from polymers to proteins and even living cells, otherwise difficult to transfer unaltered in the form of thin films by other techniques. Furthermore, the use of laser light as transfer agent ensures purity of films and pulse-to-pulse deposition allows for an unprecedented control of film thickness at the nm level. This Special Issue is a collection of state-of-the art research papers and reviews in which the topics of interest are devoted to thin film synthesis by PLD and MAPLE, for numerous research and industry field applications, such as bio-active coatings for medical implants and hard, protective coatings for cutting and drilling tools withstanding high friction and elevated temperatures, sensors, solar cells, lithography, magnetic devices, energy-storage and conversion devices, controlled drug delivery and in situ microstructuring for boosting of surface properties.

Download or read book Functional Coatings written by Raj K. Arya and published by John Wiley & Sons. This book was released on 2024-05-07 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: FUNCTIONAL COATINGS A must-own resource for understanding functional coatings and their revolutionary potential Functional coatings are those which provide not only the protection and performance enhancement of a conventional coating, but also offer additional properties tailored to meet the specific requirements of a given industry or application. They have applications in a huge range of sectors, including automotive, aerospace, healthcare, energy, and more. Coatings with properties like fire retardancy, antimicrobial properties, or controlled drug release have the potential to revolutionize entire industries. Functional Coatings offers a comprehensive resource for engineers and researchers looking to understand these coatings and the opportunities they provide. Beginning with an overview of the subject’s foundations and industrial significance, the book analyzes numerous coating methods and their properties, with a particular focus on anticorrosion coatings. The result is an indispensable resource for professionals in virtually any technological industry looking to understand the benefits of a cutting-edge toolkit. Functional Coatings readers will also find: Coverage of synthesis, durability, reproducibility, cost-effectiveness, specialized surface morphology, and environmental friendliness of each coating Detailed discussion of antimicrobial coatings, fire-retardant coatings, self-healing coatings, nanopowder coatings, coatings for marine applications, and many more Applications of additives, machine learning, and sophisticated characterizations, etc. as per industry requirements Functional Coatings is ideal for researchers, engineers, and industry professionals working with any area of technology where coatings have purchase.

Download or read book Proceedings of Regional Tribology Conference 2011 written by M.A. Maleque and published by Malaysian Tribology Society. This book was released on 2011-11-22 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a compilation of papers presented at the Regional Tribology Conference 2011 (RTC2011) - Langkawi, Malaysia on 22 ~ 24 November 2011.

Download or read book Metallurgical Coatings and Thin Films 1993 written by and published by . This book was released on 1993 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design and Implementation of Pulsed Laser Deposition System for Thin Film Coating Applications written by Tov I. Vestgaarden and published by . This book was released on 2004 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Surface Engineering 2001 Fundamentals and Applications Volume 697 written by Wen Jin Meng and published by . This book was released on 2002-08-27 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The MRS Symposium Proceeding series is an internationally recognised reference suitable for researchers and practitioners.

Download or read book Deposition of Silicon Carbide and Amorphous Carbon Films by Pulsed Laser Deposition written by Thomas Zehnder and published by . This book was released on 1995 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Surface Engineering written by and published by . This book was released on 2001 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Deposition Technologies for Films and Coatings written by Peter M. Martin and published by William Andrew. This book was released on 2009-12-01 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 3e, edited by Peter M. Martin, PNNL 2005 Inventor of the Year, is an extensive update of the many improvements in deposition technologies, mechanisms, and applications. This long-awaited revision includes updated and new chapters on atomic layer deposition, cathodic arc deposition, sculpted thin films, polymer thin films and emerging technologies. Extensive material was added throughout the book, especially in the areas concerned with plasma-assisted vapor deposition processes and metallurgical coating applications.

Download or read book Metals Abstracts written by and published by . This book was released on 1996 with total page 1628 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ceramic Abstracts written by American Ceramic Society and published by . This book was released on 1996 with total page 1000 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1992 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Materials Selection written by Myer Kutz and published by John Wiley & Sons. This book was released on 2002-07-22 with total page 1524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Erstmals in einem Band werden Werkstoffe hier (in zwei getrennten Systemen) sowohl nach ihrer technischen Anwendung als auch nach ihren Eigenschaften geordnet. - Benutzer können deshalb zunächst nach der Gruppe von Materialen suchen, die für eine spezielle Anwendung geeignet sind, und anschließend Details über jedes einzelne Material finden - Suchkriterien sind Eigenschaften wie Wärmeleitfähigkeit, optisches Reflexionsvermögen, Elastizität usw. und Anwendungsgebiete wie Bauwesen, Biomedizin, Fahrzeugbau, Luftfahrttechnik, Elektrotechnik usw. - berücksichtigt werden sowohl herkömmliche Werkstoffe (Eisen- und Nichteisenmetalle, Kunststoffe, Klebstoffe) als auch Kompositwerkstoffe und synthetische Materialen wie Laminate, Fasern und Keramiken

Download or read book Chemical Abstracts written by and published by . This book was released on 2002 with total page 2726 pages. Available in PDF, EPUB and Kindle. Book excerpt: