Download or read book Project Management and Control Allocating and scheduling resources written by R. L. Martino and published by . This book was released on 1965 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Comprehensive Guide to Project Management Schedule and Cost Control written by Randal Wilson and published by Pearson Education. This book was released on 2014 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the most complete guide to all the principles and techniques you need to successfully schedule projects and control their costs. Not a broad project management guide, it offers focused coverage of every essential aspect of scheduling and cost control -- including key issues ignored by typical PM guides. Expert project manager and long-time instructor Randal Wilson makes scheduling and cost control intuitive through the extensive use of graphs, charts, and case studies, and provides all the formulas and worked examples you need to succeed. Writing for both newcomers and working project managers, Wilson covers all this, and more: Project structures, including differences between projects and programs, and how those differences affect costing and scheduling Initiation: how projects start, how to develop project charters and stakeholder registers, and how to manage stakeholders Planning, in depth: what costs must be addressed, and what schedule constraints must be considered Project schedule analysis: activity definition, WBS, and work packages; activity sequencing and diagramming; proven methodologies for estimating resources and activity durations; and schedule development Project cost analysis: gathering and estimating all project costs, including labor, materials, vendor bids, subcontractors, contracts, equipment, facilities, and direct/indirect costs. Budgeting via top-down, bottom-up, and activity-based methods Project monitoring and control: earned value, tracking Gantt, S-Curves, performance reviews, milestone analysis, change control systems, estimate at completion, forecasting, and much more.

Download or read book Project Management Planning and Control written by Albert Lester and published by Butterworth-Heinemann. This book was released on 2007 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fifth edition provides a comprehensive resource for project managers. It describes the latest project management systems that use critical path methods.

Download or read book Scheduling of Resource Constrained Projects written by Robert Klein and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Project management has become a widespread instrument enabling organizations to efficiently master the challenges of steadily shortening product life cycles, global markets and decreasing profit margins. With projects increasing in size and complexity, their planning and control represents one of the most crucial management tasks. This is especially true for scheduling, which is concerned with establishing execution dates for the sub-activities to be performed in order to complete the project. The ability to manage projects where resources must be allocated between concurrent projects or even sub-activities of a single project requires the use of commercial project management software packages. However, the results yielded by the solution procedures included are often rather unsatisfactory. Scheduling of Resource-Constrained Projects develops more efficient procedures, which can easily be integrated into software packages by incorporated programming languages, and thus should be of great interest for practitioners as well as scientists working in the field of project management. The book is divided into two parts. In Part I, the project management process is described and the management tasks to be accomplished during project planning and control are discussed. This allows for identifying the major scheduling problems arising in the planning process, among which the resource-constrained project scheduling problem is the most important. Part II deals with efficient computer-based procedures for the resource-constrained project scheduling problem and its generalized version. Since both problems are NP-hard, the development of such procedures which yield satisfactory solutions in a reasonable amount of computation time is very challenging, and a number of new and very promising approaches are introduced. This includes heuristic procedures based on priority rules and tabu search as well as lower bound methods and branch and bound procedures which can be applied for computing optimal solutions.

Download or read book Resource Allocation in Project Management written by Christoph Schwindt and published by Springer Science & Business Media. This book was released on 2005-06-13 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is devoted to structural issues, algorithms, and applications of resource allocation problems in project management. Special emphasis is given to a unifying framework within which a large variety of project scheduling problems can be treated. Those problems involve general temporal constraints among project activities, different types of scarce resources, and a broad class of regular and nonregular objective functions ranging from time-based and financial to resource levelling functions. The diversity of the models proposed allows for covering many features arising in scheduling applications beyond the field of project management such as short-term production planning in the manufacturing or process industries.

Download or read book Managing Multiple Projects written by Lowell Dye and published by CRC Press. This book was released on 2002-06-04 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Details time-efficient and cost-effective strategies to evaluate, select, prioritize, plan, and manage multiple projects. Presents proven methods and practical applications for the development of successful project portfolios and prosperous multiproject environments. Provides useful models and scheduling frameworks for increasecd quality and productivity."

Download or read book Project Management and Control Allocating and scheduling resources written by R. L. Martino and published by . This book was released on 1965 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mastering Project Management written by James P. Lewis and published by McGraw Hill Professional. This book was released on 1998-03-22 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tens of thousands of readers rely on James Lewis's classic Project Planning, Scheduling & Control for hands-on help in bringing projects in on time and on budget. Now, this higher-level guide takes project managers beyond basic skills. Using the flexible and down-to-earth approach for which Lewis is famed, it covers advanced topics such as identifying customer requirements using QFD (quality function deployment); allocating resources for improved scheduling applying systems thinking; and using decision-support tools in project management.

Download or read book Managing Resource Acquisition Project Controls written by Planning Planet and published by GCATI. This book was released on with total page 105 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Managing Resource Allocation & Acquisition is to introduce the tools, techniques and methodologies, deemed appropriate to identifying, acquiring and allocating resources that have been identified as being “best tested and proven” practices and which have been found to work on “most projects, most of the time”; provide a logical or rationale sequence showing when those tools or techniques would normally and customarily be used and in selected instances, show how to use those tools/techniques and/or where to find additional information on how to use or apply them.

Download or read book Elements of Project Management written by M. Spinner and published by Pearson Education. This book was released on 1992 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here are the tools you need to arrange an effective plan and schedule and the techniques necessary to monitor and control your project once it's underway. Following the sequence of how an actual project evolves, the guide also shows you how to handle project costs, deal with labor allocation, and implement the right computer applications for your special needs. This second edition updates the most significant developments and improvements that have occurred in project management over the past few years, helping you ensure more efficient, successful projects from the start. These changes include: the phenomenal growth of the personal computer which has permitted the concept of project management to expand in virtually every type of endeavor...and the current emphasis of participative management and employee involvement (PM/EI) in business and industry. The guide is equally suited for readers from both the academic and professional business worlds.

Download or read book Project Management with Dynamic Scheduling written by Mario Vanhoucke and published by Springer Science & Business Media. This book was released on 2013-11-29 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topic of this book is known as dynamic scheduling, and is used to refer to three dimensions of project management and scheduling: the construction of a baseline schedule and the analysis of a project schedule’s risk as preparation of the project control phase during project progress. This dynamic scheduling point of view implicitly assumes that the usability of a project’s baseline schedule is rather limited and only acts as a point of reference in the project life cycle. Consequently, a project schedule should especially be considered as nothing more than a predictive model that can be used for resource efficiency calculations, time and cost risk analyses, project tracking and performance measurement, and so on. In this book, the three dimensions of dynamic scheduling are highlighted in detail and are based on and inspired by a combination of academic research studies at Ghent University (www.ugent.be), in-company trainings at Vlerick Business School (www.vlerick.com) and consultancy projects at OR-AS (www.or-as.be). First, the construction of a project baseline schedule is a central theme throughout the various chapters of the book, and is discussed from a complexity point of view with and without the presence of project resources. Second, the creation of an awareness of the weak parts in a baseline schedule is discussed at the end of the two baseline scheduling parts as schedule risk analysis techniques that can be applied on top of the baseline schedule. Third, the baseline schedule and its risk analyses can be used as guidelines during the project control step where actual deviations can be corrected within the margins of the project’s time and cost reserves. The second edition of this book has seen corrections, additions and amendments in detail throughout the book. Moreover Chapter 15 on "Dynamic Scheduling with ProTrack" has been completely rewritten and extended with a section on "ProTrack as a research tool".

Download or read book Project Scheduling and Cost Control written by James Taylor and published by J. Ross Publishing. This book was released on 2008 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: More than 80 percent of all projects start with underestimated schedules and costs, and are doomed to exceed projections. This concise book demonstrates how to establish realistic estimates, how to control a projects schedule and costs, and how to develop the projects plan and processes for successful project completion.

Download or read book A Comprehensive Guide to Project Management Schedule and Cost Control written by Randal Wilson and published by Pearson Education. This book was released on 2014-03-21 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master all the modern project scheduling and cost control techniques you need, in one focused tutorial! Randal Wilson's Project Schedule & Cost Control isn't your typical project management guide: it's 100% focused on the specific principles, techniques, and best-practice methodologies of scheduling and cost control. Wilson illuminates key issues through the extensive use of graphs, charts, case studies, and worked examples; and calls your attention to crucial issues that "generic" PM books ignore. Coverage includes: Project structures, including differences between projects and programs, and how those differences affect costing and scheduling Initiation: how projects start, how to develop project charters and stakeholder registers, and how to manage stakeholders Planning, in depth: what costs must be addressed, and what schedule constraints must be considered Project schedule analysis: activity definition, WBS, and work packages; activity sequencing and diagramming; proven methodologies for estimating resources and activity durations; and schedule development Project cost analysis: gathering and estimating all project costs, including labor, materials, vendor bids, subcontractors, contracts, equipment, facilities, and direct/indirect costs. Budgeting via top-down, bottom-up, and activity-based methods Project monitoring and control: earned value, tracking Gantt, S-Curves, performance reviews, milestone analysis, change control systems, estimate at completion, forecasting, and much more For both project management newcomers and working project managers who need to sharpen their skills

Download or read book Project Planning Scheduling and Control in Construction written by Calin M. Popescu and published by John Wiley & Sons. This book was released on 1995-03-20 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: Critical Path Method (CPM) and Performance Evaluation and ReviewTechnique (PERT) are widely recognized as the most effectivemethods of keeping large, complex construction projects onschedule, under budget, and up to professional standards. But thesemethods remain underused because they are poorly understood and,due to a host of unfamiliar terms and applications, may seem morecomplicated than they really are. This encyclopedia brings together, in one comprehensive volume, allterms, definitions, and applications related to the time and costmanagement of construction projects. While many of these termsrefer to ancient and venerable building practices, others haveevolved quite recently and refer specifically to modernconstruction and management techniques. Sources include hundreds ofprofessional books, trade journals, and research publications, aswell as planning and scheduling software vendor literature. The detailed glossary of all applicable terms includes across-referenced listing of examples that describe real-worldapplications for each term supplied. An extensive bibliographycovers all applicable books, articles, and periodicals available onproject planning, scheduling, and control using CPM and relatedsubjects. This book is an important quick reference and desktop informationresource for construction planners, schedulers, and controllers, aswell as civil engineers and project managers. It is also theultimate research tool for educators, students, or anyone who seeksto improve their understanding of the management of modernconstruction projects.

Download or read book Project Management written by Adedeji B. Badiru and published by CRC Press. This book was released on 2011-12-12 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: As organizations realize the benefits of PM, the need to develop effective management tools rises with the increasing complexity of new technologies and processes. Taking a systems approach to accomplishing goals and objectives, Project Management: Systems, Principles, and Applications covers contemporary tools and techniques of PM from an established pedagogical perspective. A project can be simple or complex. In each case, proven PM processes must be followed with a world systems view of the project environment. While on-the-job training is possible for many of the PM requirements, rigorous and formal training must be used. Consequently, PM resources are of high utility. This text fills the void that exists in the availability of PM resources. Although individual books dealing with management principles, optimization models, and computer tools are available, there are few guidelines for the integration of these three areas for PM purposes. This book integrates these areas into a comprehensive guide to PM. It introduces the triad approach to improve the effectiveness of PM with respect to schedule, cost, and performance constraints within the context of systems modeling. It provides details on an integrated systems PM approach that can help diminish the adverse impacts of these issues through good project planning, organizing, scheduling, and control. CRC Press Authors Speak Adedeji B. Baduri speaks about his book. Watch the video

Download or read book Project Control written by Wayne J. Del Pico and published by John Wiley & Sons. This book was released on 2023-08-22 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: PROJECT CONTROL Reader-friendly, integrated approach to construction project cost and scheduling control, with all-new pedagogical elements The Second Edition of Project Control is an introductory practical guide that explores the reasons and methodologies for proper planning, monitoring, and controlling project costs and schedule and shows how productivity models are created, monitored, and controlled, as well as how corrective actions are implemented as deviations from the baseline occur. Project Control uses simple language to convey project control principles, making it an excellent resource to teach with and learn from in a classroom setting. This Second Edition has been updated with all-new pedagogical elements and ancillary materials for use in the construction project management classroom. This new edition features all-new sections on baseline scheduling, estimate development, probability analysis, and more. Written by Wayne Del Pico, a seasoned professional with over 40 years of experience in construction project controls, Project Control includes detailed information on: Role of the project manager, covering leading the project team, creating the project plan, developing the project schedule, and monitoring project progress over time Project control cycles, covering plans to achieve goals, executing work according to plan, identifying variations and their causes, and executive work and measure changes Pre-construction planning, covering key personnel and responsibilities and establishing baselines for schedule and cost control Budgeting, covering types of estimates, organization estimates, and harnessing the budget as a management tool Providing expert insight into the management skills of the project manager combined with the analytical focus of the accountant and the “big picture” oversight of the executive, Project Control is an essential resource for students in construction management programs and professionals in construction firms with specializations in long-term infrastructure projects.

Download or read book Critical Path Method written by M. Krishnamoorthy and published by . This book was released on 1968 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: