Download or read book Production Technology of Recombinant Therapeutic Proteins written by Chiranjib Chakraborty and published by Daya Books. This book was released on 2004 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Increasing Number Of Recombinant Therapeutic Proteins Are Currently Being Developed, Tested In Clinical Trials And Marketed For Used. Most Of The Recombinant Therapeutic Proteins Are Being Successfully Produced Into Escherichia Coli And Pichia Pastoris Expression System. These Two Expression Systems Are Very Much Efficient And Cost Effective. This Book Takes A Close Look Of These Two Expression Systems And Fermentation Conditions, Purification Strategies Of Different Recombinant Proteins. This Book Also Discusses The Market Size And Cost Analysis For The Production Of Different Therapeutic Proteins And Some General Experimental Protocols For Production. Contents Part I: Recombinant Protein Expression Into Escherichia Coli And Fermentation Conditions; Chapter 1: Introduction; Chapter 2: Construction Of Efficient Expression Vector (Plasmid); Chapter 3: Factors Affecting Transcription, Promoters, Upstream Elements, Transcriptional Terminators, Transcriptional Antitermin, Tightly Regulated Expression Systems; Chapter 4: Mrna Stability; Chapter 5: Factors Affecting Translation, Mrna Translational Initiator, Translational Enhancers, Translational Termination; Chapter 6: Expression Of Target Protein And The Compartments Of Expression, Cytoplasmic Expression, Periplasmic Expression, Extracellular Secretion; Chapter 7: Fusion Proteins; Chapter 8: Post-Translational Protein Folding; Chapter 8: Codon Usage; Chapter 10: Protein Degradation; Chapter 11: Fermentation Conditions For High-Density Cell Cultivation (Hdcc), Growth Medium, Efficient Production Of Recombinant Protein In Hdcc, Nutrient Feeding Strategy In Hdcc; Chapter 12: One Examples Of Protein Production Using E. Coli Expression System; Chapter 13: Conclusion. Part Ii: Recombinant Protein Expression Into Yeast, Pichia Pastoris And Fermentation Conditions; Chapter 1: Introduction; Chapter 2: Why P. Pastoris? Chapter 3: Construction Of Expression Strains, Expression Vectors, Alternative Promoters, Host Strains, Methanol Utilisation Phenotype, Protease-Reduced Host Strains, Integration Of Expression Vectors Into The P. Pastoris Genome, Generating Multicopy Strains; Chapter 4: Post-Translational Modifications Of Secreted Proteins, Secretion Signal Selection, N-Linked Glycosylation; Chapter 5: Production Of Recombinant Proteins In Fermenter Cultures Of The Yeast, Pichia Pastoris, Conceptual Basis For The P. Pastoris Expression System, High-Level Expression In Fermenter Cultures, Protein-Specific Adjustments To Improve Yield, Glycosylation Of Recombinant Proteins, Secretion Signals; Chapter 6: One Examples Of Protein Producing Using P. Pastoris Expression System, Chapter 7: Conclusion. Part Iii: Purification Strategies For Recombinant Proteins; Chapter 1: Purification Of Proteins; Chapter 2: Conventional Chromatography, Ion Exchange Chromatography, Reversed Phase Chromatography, Gel Permeation Chromatography, Affinity Chromatography, Affinity Tags, Cleavage, Conclusion. Part Iv: Market Size And Cost Analysis For The Production Of Therapeutic Proteins; Chapter 1: Market Size Of Therapeutic Proteins; Chapter 2: Outline Structure Of A Productin Unit And Cost Analysis For The Production Of Three Therapeutic Proteins. Part V: General Experimental Protocols; Chapter 1: Different Experimental Protocols, Preparation Of Genome Dna For E. Coli, A Differnt Method For Preparation Of Genomic Dna From Bacteria, Preparation Of Proteins From Periplasm (Osmotic Shock Method), Preparation Of Proteins From Outer Membrane, Transformation Of Plasmid Dna Into E. Coli (Calcium Chloride/Heat Shock Method), Transformation Of Plasmid Dna Into E. Coli (Electroporation), Sds-Page For Large Proteins, Sds-Page For Small Peptide, Pcr Amplification Of Dna, Protein Quantification: Brandford Method, Trans-Bloting For Protein, Restriction Enzyme Digestion Of Dna, Phenol/Chloroform Extraction Of Dna, Ethanol Precipitation Of Dna, Agarose Gel Electrophoresis, Transformation Of E. Coli By Electroporation (Alternative Method), Wizard Tm Pcr Preps Dna Purification System For Rapid, Purification Of Dna Fragments, Alternate Method For Purifying Dna From Agarose Gels, Southern Blotting, Rt Pcr Protocol, Using Superscript Reverse Transcriptase, Preparation Of Sequencing Gels, Isolation Of Rna From Mammalian Cells Using Rnazoltm (Teltest), Preparation For Yeast Transformation, Yeast Transformation, Digesting Prsq-Ura3 With Bamhi, Genomic Dna Preparation Of Yeast, Ligation (Circularisation) Of Genomic Dna Fragments, E. Coli Transformation (Alternate Method), Dna Miniprep From E. Coli (Alternate Method), Basic Plasmid Dna Isolation Protocol, Identification And Determination Of Amount Rec-Hum Proteins Via An Immunoenzymatic Test (Elisa), Determination Of Host Dna Contaminant Into R Hu Protein Through Dot Blot Method, Protocols For Down-Stream Processing.
Download or read book Update on Production of Recombinant Therapeutic Protein written by Jianwei Zhu and published by Smithers Rapra. This book was released on 2013-05-09 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past decade, the transient gene expression (TGE) technology platform has been actively pursued to produce a wide range of therapeutic proteins, monoclonal antibodies, and vaccines for mainly preclinical assessment, due to its short development times and low overall cost. This book updates the latest advances in the field, with focusing on systematic description of the technology from cell lines, cell culture conditions, vector construction, expression strategy, current protocols, optimisation of the procedure, and potential for clinical application. As a conclusion, the author foresees that therapeutic biopharmaceutics will be manufactured for clinical development using TGE technology in the near future because of its fast development time, good protein expression, acceptable quality of product and due to the progress which has been made in analytical methodology and process quality control. The objectives of this book are to summarise current TGE protocols, to describe optimisation of the technology through the latest advances, and to explore clinical applications of the technology. It gives the reader a good insight into the latest development and future application of the technology platform, including: The current protocols from small to large scale for different cells. Optimisation methods in construction designing, transfection procedures, and cell culture conditions. Overall quality of the product from the transient gene expression. Future clinical application of the technology platform.
Download or read book PRODUCTION TECHNOLOGY OF RECOMBIANANT THERAPEUTIC PROTEINS written by CHIRANJIB CHAKRABORTY. and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cell Culture Engineering written by Gyun Min Lee and published by John Wiley & Sons. This book was released on 2020-01-13 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers a comprehensive overview of cell culture engineering, providing insight into cell engineering, systems biology approaches and processing technology In Cell Culture Engineering: Recombinant Protein Production, editors Gyun Min Lee and Helene Faustrup Kildegaard assemble top class authors to present expert coverage of topics such as: cell line development for therapeutic protein production; development of a transient gene expression upstream platform; and CHO synthetic biology. They provide readers with everything they need to know about enhancing product and bioprocess attributes using genome-scale models of CHO metabolism; omics data and mammalian systems biotechnology; perfusion culture; and much more. This all-new, up-to-date reference covers all of the important aspects of cell culture engineering, including cell engineering, system biology approaches, and processing technology. It describes the challenges in cell line development and cell engineering, e.g. via gene editing tools like CRISPR/Cas9 and with the aim to engineer glycosylation patterns. Furthermore, it gives an overview about synthetic biology approaches applied to cell culture engineering and elaborates the use of CHO cells as common cell line for protein production. In addition, the book discusses the most important aspects of production processes, including cell culture media, batch, fed-batch, and perfusion processes as well as process analytical technology, quality by design, and scale down models. -Covers key elements of cell culture engineering applied to the production of recombinant proteins for therapeutic use -Focuses on mammalian and animal cells to help highlight synthetic and systems biology approaches to cell culture engineering, exemplified by the widely used CHO cell line -Part of the renowned "Advanced Biotechnology" book series Cell Culture Engineering: Recombinant Protein Production will appeal to biotechnologists, bioengineers, life scientists, chemical engineers, and PhD students in the life sciences.
Download or read book Cell Culture Engineering written by Gyun Min Lee and published by John Wiley & Sons. This book was released on 2020-01-13 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers a comprehensive overview of cell culture engineering, providing insight into cell engineering, systems biology approaches and processing technology In Cell Culture Engineering: Recombinant Protein Production, editors Gyun Min Lee and Helene Faustrup Kildegaard assemble top class authors to present expert coverage of topics such as: cell line development for therapeutic protein production; development of a transient gene expression upstream platform; and CHO synthetic biology. They provide readers with everything they need to know about enhancing product and bioprocess attributes using genome-scale models of CHO metabolism; omics data and mammalian systems biotechnology; perfusion culture; and much more. This all-new, up-to-date reference covers all of the important aspects of cell culture engineering, including cell engineering, system biology approaches, and processing technology. It describes the challenges in cell line development and cell engineering, e.g. via gene editing tools like CRISPR/Cas9 and with the aim to engineer glycosylation patterns. Furthermore, it gives an overview about synthetic biology approaches applied to cell culture engineering and elaborates the use of CHO cells as common cell line for protein production. In addition, the book discusses the most important aspects of production processes, including cell culture media, batch, fed-batch, and perfusion processes as well as process analytical technology, quality by design, and scale down models. -Covers key elements of cell culture engineering applied to the production of recombinant proteins for therapeutic use -Focuses on mammalian and animal cells to help highlight synthetic and systems biology approaches to cell culture engineering, exemplified by the widely used CHO cell line -Part of the renowned "Advanced Biotechnology" book series Cell Culture Engineering: Recombinant Protein Production will appeal to biotechnologists, bioengineers, life scientists, chemical engineers, and PhD students in the life sciences.
Download or read book Basic and Applied Aspects of Biotechnology written by Varsha Gupta and published by Springer. This book was released on 2016-10-22 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the journey of biotechnology, searching for new avenues and noting the impressive accomplishments to date. It has harmonious blend of facts, applications and new ideas. Fast-paced biotechnologies are broadly applied and are being continuously explored in areas like the environmental, industrial, agricultural and medical sciences. The sequencing of the human genome has opened new therapeutic opportunities and enriched the field of medical biotechnology while analysis of biomolecules using proteomics and microarray technologies along with the simultaneous discovery and development of new modes of detection are paving the way for ever-faster and more reliable diagnostic methods. Life-saving bio-pharmaceuticals are being churned out at an amazing rate, and the unraveling of biological processes has facilitated drug designing and discovery processes. Advances in regenerative medical technologies (stem cell therapy, tissue engineering, and gene therapy) look extremely promising, transcending the limitations of all existing fields and opening new dimensions for characterizing and combating diseases.
Download or read book Fusion Protein Technologies for Biopharmaceuticals written by Stefan R. Schmidt and published by John Wiley & Sons. This book was released on 2013-01-28 with total page 995 pages. Available in PDF, EPUB and Kindle. Book excerpt: The state of the art in biopharmaceutical FUSION PROTEIN DESIGN Fusion proteins belong to the most lucrative biotech drugs—with Enbrel® being one of the best-selling biologics worldwide. Enbrel® represents a milestone of modern therapies just as Humulin®, the first therapeutic recombinant protein for human use, approved by the FDA in 1982 and Orthoclone® the first monoclonal antibody reaching the market in 1986. These first generation molecules were soon followed by a plethora of recombinant copies of natural human proteins, and in 1998, the first de novo designed fusion protein was launched. Fusion Protein Technologies for Biopharmaceuticals examines the state of the art in developing fusion proteins for biopharmaceuticals, shedding light on the immense potential inherent in fusion protein design and functionality. A wide pantheon of international scientists and researchers deliver a comprehensive and complete overview of therapeutic fusion proteins, combining the success stories of marketed drugs with the dynamic preclinical and clinical research into novel drugs designed for as yet unmet medical needs. The book covers the major types of fusion proteins—receptor-traps, immunotoxins, Fc-fusions and peptibodies—while also detailing the approaches for developing, delivering, and improving the stability of fusion proteins. The main body of the book contains three large sections that address issues key to this specialty: strategies for extending the plasma half life, the design of toxic proteins, and utilizing fusion proteins for ultra specific targeting. The book concludes with novel concepts in this field, including examples of highly relevant multifunctional antibodies. Detailing the innovative science, commercial realities, and brilliant potential of fusion protein therapeutics, Fusion Protein Technologies for Biopharmaceuticals is a must for pharmaceutical scientists, biochemists, medicinal chemists, molecular biologists, pharmacologists, and genetic engineers interested in determining the shape of innovation in the world of biopharmaceuticals.
Download or read book Production of Therapeutic Proteins in Plants written by and published by UCANR Publications. This book was released on with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cell Line Development written by Mohamed Al-Rubeai and published by Springer Science & Business Media. This book was released on 2009-08-11 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mammalian cell lines command an effective monopoly for the production of therapeutic proteins that require post-translational modifications. This unique advantage outweighs the costs associated with mammalian cell culture, which are far grater in terms of development time and manufacturing when compared to microbial culture. The development of cell lines has undergone several advances over the years, essentially to meet the requirement to cut the time and costs associated with using such a complex hosts as production platforms. This book provides a comprehensive guide to the methodology involved in the development of cell lines and the cell engineering approach that can be employed to enhance productivity, improve cell function, glycosylation and secretion and control apoptosis. It presents an overall picture of the current topics central to expression engineering including such topics as epigenetics and the use of technologies to overcome positional dependent inactivation, the use of promoter and enhancer sequences for expression of various transgenes, site directed engineering of defined chromosomal sites, and examination of the role of eukaryotic nucleus as the controller of expression of genes that are introduced for production of a desired product. It includes a review of selection methods for high producers and an application developed by a major biopharmaceutical industry to expedite the cell line development process. The potential of cell engineering approch to enhance cell lines through the manipulation of single genes that play important roles in key metabolic and regulatory pathways is also explored throughout.
Download or read book Protein Therapeutics 2 Volume Set written by Tristan Vaughan and published by John Wiley & Sons. This book was released on 2017-12-04 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: Branchenführende Big-Pharma-Unternehmen und erstklassige Forscher präsentieren grundlegende Konzepte und Herausforderungen bei proteinbasierten Pharmazeutika. Beinhaltet auch eine Einführung in die aus Sicht der Arzneimittelentwicklung fünf wesentlichen Anwendungsbereiche.
Download or read book Recombinant Proteins From Plants written by Loïc Faye and published by Humana Press. This book was released on 2010-12-16 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Altogether, the biochemical, technical and economic limitations on existing proka- otic and eukaryotic expression systems and the growing clinical demand for complex therapeutic proteins have created substantial interest in developing new expression systems for the production of therapeutic proteins. To that end, plants have emerged in the past decade as a suitable alternative to the current production systems, and today their potential for production of high quality, much safer and biologically active complex recombinant pharmaceutical proteins is largely documented. The chapters in this volume, contributed by leaders in the field, sum up the state-- the-art methods for using a variety of different plants as expression hosts for phar- ceutical proteins. Several production platforms are presented, ranging from seed- and leaf-based production in stable transgenic plant lines, to plant cell bioreactors, to viral or Agrobacterium-mediated transient expr ession systems. Currently, antibodies and their derived fragments represent the largest and most important group of biote- nological products in clinical trials. This explains why the potential of most prod- tion platforms is illustrated here principally for antibodies or antibody fragments with acknowledged potential for immunotherapy in humans. In addition, a comparison of different plant expression systems is presented using aprotinin, a commercial phar- ceutical protein, as a test system. Although multiple books and monographs have been recently published on mol- ular pharming, there is a noticeable dearth of bench step-by-step protocols that can be used quickly and easily by beginners entering this new field.
Download or read book Development and Manufacture of Protein Pharmaceuticals written by Steve L. Nail and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this era of biotechnology there have been many books covering the fundamentals of recombinant DNA technology and protein chemistry. However, not many sources are available for the pharmaceutical develop ment scientist and other personnel responsible for the commercialization of the finished dosage forms of these new biopharmaceuticals and other products from biotechnology. This text will help to fill this gap. Once active biopharmaceutical molecules are candidates for clinical trial investigation and subsequent commercialization, a number of other activities must take place while research and development on these molecules continues. The active ingredient itself must be formulated into a finished dosage form that can be conveniently used by health care professionals and patients. Properties of the biopharmaceutical molecule must be clearly understood so that the appropriate finished product formulation can be developed. Finished product formulation development includes not only the chemical formulation, but also the packaging system, the manufacturing process, and appropriate control strategies to assure such good manufacturing practice attributes as safety, identity, strength, purity, and quality.
Download or read book Therapeutic Proteins and Peptides written by and published by Academic Press. This book was released on 2018-04-18 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Therapeutic Proteins and Peptides, Volume 112 in an ongoing series promotes further research in the discovery of new therapeutic targets that can be affected by therapeutic proteins and peptides to cure or manage symptoms of human diseases, with this release focusing on the Rational Design of Stable Liquid Formulations of Biopharmaceuticals, Formulation strategies for peptides, proteins and antibodies using nanotechnology, the Solution structural dynamics of therapeutic peptides and their adsorption on plasmonic nanoparticles, Enzymatic approaches of protein-polymer conjugation, Chimeric small antibody fragments as a strategy to deliver therapeutic payloads, Smart cell-penetrating peptide-based techniques for cytoplasmic delivery of therapeutic macromolecules, and more. - Describes advances in the discovery and application of therapeutic proteins/peptides which allow better targeting to the site of treatment and cause fewer adverse effects when compared to chemical compounds used for disease treatment - Targeted to a very wide audience of specialists, researchers and students - Written by well-renown authorities in their field - Includes a number of high quality illustrations, figures and tables
Download or read book Production of Therapeutic Proteins by Genetic Engineering written by Duane T. Gish and published by . This book was released on 1998 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Challenges in Protein Product Development written by Nicholas W. Warne and published by Springer. This book was released on 2018-06-20 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this volume, the authors discuss the many significant challenges currently faced in biotechnology dosage form development, providing guidance, shared experience and thoughtful reflection on how best to address these potential concerns. As the field of therapeutic recombinant therapeutic proteins enters its fourth decade and the market for biopharmaceuticals becomes increasingly competitive, companies are increasingly dedicating resources to develop innovative biopharmaceuticals to address unmet medical needs. Often, the pharmaceutical development scientist is encountering challenging pharmaceutical properties of a given protein or by the demands placed on the product by stability, manufacturing and preclinical or clinical expectations, as well as the evolving regulatory expectations and landscape. Further, there have been new findings that require close assessment, as for example those related to excipient quality, processing, viscosity and device compatibility and administration, solubility and opalescence and container-closure selection. The literature varies widely in its discussion of these critical elements and consensus does not exist. This topic is receiving a great deal of attention within the biotechnology industry as well as with academic researchers and regulatory agencies globally. Therefore, this book is of interest for business leaders, researchers, formulation and process development scientists, analytical scientists, QA and QC officers, regulatory staff, manufacturing leaders and regulators active in the pharmaceutical and biotech industry, and expert reviewers in regulatory agencies.
Download or read book Glyco Engineering written by Alexandra Castilho and published by Humana. This book was released on 2015-06-17 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conceived with the intention of providing an array of strategies and technologies currently in use for glyco-engineering distinct living organisms, this book contains a wide range of methods being developed to control the composition of carbohydrates and the properties of proteins through manipulations on the production host rather than in the protein itself. The first five sections deal with host-specific glyco-engineering and contain chapters that provide protocols for modifications of the glycosylation pathway in bacteria, yeast, insect, plants and mammalian cells, while the last two sections explore alternative approaches to host glyco-engineering and selected protocols for the analysis of the N-glycans and glyco-profiling by mass spectrometry. Written for the highly successful Methods in Molecular Biology series, chapters include introductions to their respective topics, lists of the necessary materials and reagents, step-by-step, readily reproducible laboratory protocols and tips on troubleshooting and avoiding known pitfalls. Authoritative and extensive, Glyco-Engineering: Methods and Protocols offers vast options to help researchers to choose the expression system and approach that best suits their intended protein research or applications.
Download or read book New Bioprocessing Strategies Development and Manufacturing of Recombinant Antibodies and Proteins written by Bob Kiss and published by Springer. This book was released on 2018-12-06 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book review series presents current trends in modern biotechnology. The aim is to cover all aspects of this interdisciplinary technology where knowledge, methods and expertise are required from chemistry, biochemistry, microbiology, genetics, chemical engineering and computer science. Volumes are organized topically and provide a comprehensive discussion of developments in the respective field over the past 3-5 years. The series also discusses new discoveries and applications. Special volumes are dedicated to selected topics which focus on new biotechnological products and new processes for their synthesis and purification. In general, special volumes are edited by well-known guest editors. The series editor and publisher will however always be pleased to receive suggestions and supplementary information. Manuscripts are accepted in English.
