Download or read book Proceedings of the ASME Heat Transfer Division 2000 Fundamentals of single phase convective heat transfer Unanswered questions and pressing challenges at the interfaces of biology and engineering Fundamentals of calibration and experimental methods in heat transfer Fundamentals of thin liquid film heat transfer Fundamentals of heat transfer in microdevices and microsystems written by and published by . This book was released on 2000 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the ASME Heat Transfer Division 2000 written by Jong H. Kim and published by . This book was released on 2000 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technical papers from the November 2000 ASME Heat Transfer Division congress and exposition comprise 31 sessions, including transport phenomena in fuel cell systems, radiation heat transfer in energy systems, heat transfer in microgravity systems, cryogenic heat transfer, innovative heat transfer vi
Download or read book Heat Transfer in Medicine and Biology written by R.C. Eberhart and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanofluid Flow in Porous Media written by Mohsen Sheikholeslami Kandelousi and published by BoD – Books on Demand. This book was released on 2020-08-19 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Studies of fluid flow and heat transfer in a porous medium have been the subject of continuous interest for the past several decades because of the wide range of applications, such as geothermal systems, drying technologies, production of thermal isolators, control of pollutant spread in groundwater, insulation of buildings, solar power collectors, design of nuclear reactors, and compact heat exchangers, etc. There are several models for simulating porous media such as the Darcy model, Non-Darcy model, and non-equilibrium model. In porous media applications, such as the environmental impact of buried nuclear heat-generating waste, chemical reactors, thermal energy transport/storage systems, the cooling of electronic devices, etc., a temperature discrepancy between the solid matrix and the saturating fluid has been observed and recognized.
Download or read book The Craft and Science of Coffee written by Britta Folmer and published by Academic Press. This book was released on 2016-12-16 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Craft and Science of Coffee follows the coffee plant from its origins in East Africa to its current role as a global product that influences millions of lives though sustainable development, economics, and consumer desire. For most, coffee is a beloved beverage. However, for some it is also an object of scientifically study, and for others it is approached as a craft, both building on skills and experience. By combining the research and insights of the scientific community and expertise of the crafts people, this unique book brings readers into a sustained and inclusive conversation, one where academic and industrial thought leaders, coffee farmers, and baristas are quoted, each informing and enriching each other. This unusual approach guides the reader on a journey from coffee farmer to roaster, market analyst to barista, in a style that is both rigorous and experience based, universally relevant and personally engaging. From on-farming processes to consumer benefits, the reader is given a deeper appreciation and understanding of coffee's complexity and is invited to form their own educated opinions on the ever changing situation, including potential routes to further shape the coffee future in a responsible manner. Presents a novel synthesis of coffee research and real-world experience that aids understanding, appreciation, and potential action Includes contributions from a multitude of experts who address complex subjects with a conversational approach Provides expert discourse on the coffee calue chain, from agricultural and production practices, sustainability, post-harvest processing, and quality aspects to the economic analysis of the consumer value proposition Engages with the key challenges of future coffee production and potential solutions
Download or read book Computational Heat Transfer written by Yogesh Jaluria and published by Routledge. This book was released on 2017-10-19 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition updated the material by expanding coverage of certain topics, adding new examples and problems, removing outdated material, and adding a computer disk, which will be included with each book. Professor Jaluria and Torrance have structured a text addressing both finite difference and finite element methods, comparing a number of applicable methods.
Download or read book Bioprocess Engineering written by Michael L. Shuler and published by . This book was released on 2014 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: For Senior-level and graduate courses in Biochemical Engineering, and for programs in Agricultural and Biological Engineering or Bioengineering. This concise yet comprehensive text introduces the essential concepts of bioprocessing-internal structure and functions of different types of microorganisms, major metabolic pathways, enzymes, microbial genetics, kinetics and stoichiometry of growth and product information-to traditional chemical engineers and those in related disciplines. It explores the engineering principles necessary for bioprocess synthesis and design, and illustrates the application of these principles to modern biotechnology for production of pharmaceuticals and biologics, solution of environmental problems, production of commodities, and medical applications.
Download or read book Introduction to Glass Science and Technology written by James E Shelby and published by Royal Society of Chemistry. This book was released on 2015-11-06 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a concise and inexpensive introduction for an undergraduate course in glass science and technology. The level of the book has deliberately been maintained at the introductory level to avoid confusion of the student by inclusion of more advanced material, and is unique in that its text is limited to the amount suitable for a one term course for students in materials science, ceramics or inorganic chemistry. The contents cover the fundamental topics of importance in glass science and technology, including glass formation, crystallization, phase separation and structure of glasses. Additional chapters discuss the most important properties of glasses, including discussion of physical, optical, electrical, chemical and mechanical properties. A final chapter provides an introduction to a number of methods used to form technical glasses, including glass sheet, bottles, insulation fibre, optical fibres and other common commercial products. In addition, the book contains discussion of the effects of phase separation and crystallization on the properties of glasses, which is neglected in other texts. Although intended primarily as a textbook, Introduction to Glass Science and Technology will also be invaluable to the engineer or scientist who desires more knowledge regarding the formation, properties and production of glass.
Download or read book Electrospun Nanofibers written by Mehdi Afshari and published by Woodhead Publishing. This book was released on 2016-09-13 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrospun Nanofibers covers advances in the electrospinning process including characterization, testing and modeling of electrospun nanofibers, and electrospinning for particular fiber types and applications. Electrospun Nanofibers offers systematic and comprehensive coverage for academic researchers, industry professionals, and postgraduate students working in the field of fiber science. Electrospinning is the most commercially successful process for the production of nanofibers and rising demand is driving research and development in this field. Rapid progress is being made both in terms of the electrospinning process and in the production of nanofibers with superior chemical and physical properties. Electrospinning is becoming more efficient and more specialized in order to produce particular fiber types such as bicomponent and composite fibers, patterned and 3D nanofibers, carbon nanofibers and nanotubes, and nanofibers derived from chitosan. Provides systematic and comprehensive coverage of the manufacture, properties, and applications of nanofibers Covers recent developments in nanofibers materials including electrospinning of bicomponent, chitosan, carbon, and conductive fibers Brings together expertise from academia and industry to provide comprehensive, up-to-date information on nanofiber research and development Offers systematic and comprehensive coverage for academic researchers, industry professionals, and postgraduate students working in the field of fiber science
Download or read book Fast Pyrolysis of Biomass written by Robert C Brown and published by Royal Society of Chemistry. This book was released on 2017-07-07 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fast pyrolysis and related catalytic pyrolysis are of increasing interest as pathways to advanced biofuels that closely mimic traditional petroleum products. Research has moved from empirical investigations to more fundamental studies of pyrolysis mechanisms. Theories on the chemical and physical pathways from plant polymers to pyrolysis products have proliferated as a result. This book brings together the latest developments in pyrolysis science and technology. It examines, reviews and challenges the unresolved and sometimes controversial questions about pyrolysis, helping advance the understanding of this important technology and stimulating discussion on the various competing theories of thermal deconstruction of plant polymers. Beginning with an introduction to the biomass-to-biofuels process via fast pyrolysis and catalytic pyrolysis, chapters address prominent questions such as whether free radicals or concerted reactions dominate deconstruction reactions. Finally, the book concludes with an economic analysis of fast pyrolysis versus catalytic pyrolysis. This book will be of interest to advanced students and researchers interested in the science behind renewable fuel technology, and particularly the thermochemical processing of biomass.
Download or read book Fundamentals of Instrumentation and Measurement written by Dominique Placko and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title presents the general principles of instrumentation processes. It explains the theoretical analysis of physical phenomena used by standard sensors and transducers to transform a physical value into an electrical signal. The pre-processing of these signals through electronic circuits – amplification, signal filtering and analog-to-digital conversion – is then detailed, in order to provide useful basic information. Attention is then given to general complex systems. Topics covered include instrumentation and measurement chains, sensor modeling, digital signal processing and diagnostic methods and the concept of smart sensors, as well as microsystem design and applications. Numerous industrial examples punctuate the discussion, setting the subjects covered in the book in their practical context.
Download or read book Process Intensification Technologies for Green Chemistry written by Kamelia Boodhoo and published by John Wiley & Sons. This book was released on 2013-01-03 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: The successful implementation of greener chemical processes relies not only on the development of more efficient catalysts for synthetic chemistry but also, and as importantly, on the development of reactor and separation technologies which can deliver enhanced processing performance in a safe, cost-effective and energy efficient manner. Process intensification has emerged as a promising field which can effectively tackle the challenges of significant process enhancement, whilst also offering the potential to diminish the environmental impact presented by the chemical industry. Following an introduction to process intensification and the principles of green chemistry, this book presents a number of intensified technologies which have been researched and developed, including case studies to illustrate their application to green chemical processes. Topics covered include: • Intensified reactor technologies: spinning disc reactors, microreactors, monolith reactors, oscillatory flow reactors, cavitational reactors • Combined reactor/separator systems: membrane reactors, reactive distillation, reactive extraction, reactive absorption • Membrane separations for green chemistry • Industry relevance of process intensification, including economics and environmental impact, opportunities for energy saving, and practical considerations for industrial implementation. Process Intensification for Green Chemistry is a valuable resource for practising engineers and chemists alike who are interested in applying intensified reactor and/or separator systems in a range of industries to achieve green chemistry principles.
Download or read book Standard Handbook of Biomedical Engineering and Design written by Myer Kutz and published by McGraw-Hill Professional Publishing. This book was released on 2003 with total page 1500 pages. Available in PDF, EPUB and Kindle. Book excerpt: THE HANDBOOK THAT BRIDGES THE GAP BETWEEN ENGINEERING PRINCIPLES AND BIOLOGICAL SYSTEMS The focus in the "Standard Handbook of Biomedical Engineering and Design" is on engineering design informed by description and analysis using engineering language and methodology. Over 40 experts from universities and medical centers throughout North America, the United Kingdom, and Israel have produced a practical reference for the biomedical professional who is seeking to solve a wide range of engineering and design problems, whether to enhance a diagnostic or therapeutic technique, reduce the cost of manufacturing a medical instrument or a prosthetic device, improve the daily life of a patient with a disability, or increase the effectiveness of a hospital department. Heavily illustrated with tables, charts, diagrams, and photographs, most of them original, and filled with equations and useful references, this handbook speaks directly to all practitioners involved in biomedical engineering, whatever their training and areas of specialization. Coverage includes not only fundamental principles, but also numerous recent advances in this fast moving discipline. Major sections include: * Biomedical Systems Analysis * Mechanics of the Human Body * Biomaterials * Bioelectricity * Design of Medical Devices and Diagnostic Instrumentation * Engineering Aspects of Surgery * Rehabilitation Engineering * Clinical Engineering The "Handbook" offers breadth and depth of biomedical engineering design coverage unmatched in any other general reference.
Download or read book Cold Plasma in Food and Agriculture written by NN Misra and published by Academic Press. This book was released on 2016-07-15 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cold Plasma in Food and Agriculture: Fundamentals and Applications is an essential reference offering a broad perspective on a new, exciting, and growing field for the food industry. Written for researchers, industry personnel, and students interested in nonthermal food technology, this reference will lay the groundwork of plasma physics, chemistry, and technology, and their biological applications. Food scientists and food engineers interested in understanding the theory and application of nonthermal plasma for food will find this book valuable because it provides a roadmap for future developments in this emerging field. This reference is also useful for biologists, chemists, and physicists who wish to understand the fundamentals of plasma physics, chemistry, and technology and their biological interactions through applying novel plasma sources to food and other sensitive biomaterials. Examines the topic of cold plasma technology for food applications Demonstrates state-of-the-art developments in plasma technology and potential solutions to improve food safety and quality Presents a solid introduction for readers on the topics of plasma physics and chemistry that are required to understand biological applications for foods Serves as a roadmap for future developments for food scientists, food engineers, and biologists, chemists, and physicists working in this emerging field
Download or read book The Mechatronics Handbook 2 Volume Set written by Robert H. Bishop and published by CRC Press. This book was released on 2018-10-08 with total page 1416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first comprehensive reference on mechatronics, The Mechatronics Handbook was quickly embraced as the gold standard in the field. From washing machines, to coffeemakers, to cell phones, to the ubiquitous PC in almost every household, what, these days, doesn’t take advantage of mechatronics in its design and function? In the scant five years since the initial publication of the handbook, the latest generation of smart products has made this even more obvious. Too much material to cover in a single volume Originally a single-volume reference, the handbook has grown along with the field. The need for easy access to new material on rapid changes in technology, especially in computers and software, has made the single volume format unwieldy. The second edition is offered as two easily digestible books, making the material not only more accessible, but also more focused. Completely revised and updated, Robert Bishop’s seminal work is still the most exhaustive, state-of-the-art treatment of the field available.
Download or read book A Guide to the Preventive Conservation of Photograph Collections written by Bertrand Lavédrine and published by Getty Publications. This book was released on 2003 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: A resource for the photographic conservator, conservation scientist, curator, as well as professional collector, this volume synthesizes both the masses of research that has been completed to date and the international standards that have been established on the subject.
Download or read book Diagnostic Radiology Physics written by International Atomic Energy Agency and published by . This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication is aimed at students and teachers involved in programmes that train medical physicists for work in diagnostic radiology. It provides a comprehensive overview of the basic medical physics knowledge required in the form of a syllabus for the practice of modern diagnostic radiology. This makes it particularly useful for graduate students and residents in medical physics programmes. The material presented in the publication has been endorsed by the major international organizations and is the foundation for academic and clinical courses in both diagnostic radiology physics and in emerging areas such as imaging in radiotherapy.
