Download or read book Proceedings of the 2016 International Conference on Physics Mechanics of New Materials and Their Applications written by Ivan A. Parinov and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Physics and Mechanics of New Materials and Their Applications written by Ivan A. Parinov and published by Springer Nature. This book was released on 2023-01-28 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents 50 selected peer-reviewed contributions from the 10th Anniversary International Conference on “Physics and Mechanics of New Materials and Their Applications”, PHENMA 2021-2022 (23-27 May, 2022, Divnomorsk, Russia), focusing on processing techniques, physics, mechanics, and applications of advanced materials. The book describes a broad spectrum of promising nanostructures, crystal structures, materials, and composites with unique properties. It presents nanotechnological design approaches, environmental-friendly processing techniques, and physicochemical as well as mechanical studies of advanced materials. The selected contributions describe recent progress in computational materials science methods and algorithms (in particular, finite-element and finite-difference modelling) applied to various technological, mechanical, and physical problems. The presented results are important for ongoing efforts concerning the theory, modelling, and testing of advanced materials. Other results are devoted to promising devices with higher accuracy, increased longevity, and greater potential to work effectively under critical temperatures, high pressure, and in aggressive environments.

Download or read book Advanced Materials written by Ivan A. Parinov and published by Springer. This book was released on 2018-05-12 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected peer-reviewed contributions from the 2017 International Conference on “Physics and Mechanics of New Materials and Their Applications”, PHENMA 2017 (Jabalpur, India, 14–16 October, 2017), which is devoted to processing techniques, physics, mechanics, and applications of advanced materials. The book focuses on a wide spectrum of nanostructures, ferroelectric crystals, materials and composites as well as promising materials with special properties. It presents nanotechnology approaches, modern environmentally friendly piezoelectric and ferromagnetic techniques and physical and mechanical studies of the structural and physical–mechanical properties of materials. Various original mathematical and numerical methods are applied to the solution of different technological, mechanical and physical problems that are interesting from theoretical, modeling and experimental points of view. Further, the book highlights novel devices with high accuracy, longevity and extended capabilities to operate under wide temperature and pressure ranges and aggressive media, which show improved characteristics, thanks to the developed materials and composites, opening new possibilities for different physico-mechanical processes and phenomena.

Download or read book Proceedings of the 2017 International Conference on Physics Mechanics of New Materials and Their Applications written by Ivan A. Parinov and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Materials written by Ivan A. Parinov and published by Springer. This book was released on 2017-08-04 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents 50 selected peer-reviewed reports from the 2016 International Conference on “Physics and Mechanics of New Materials and Their Applications”, PHENMA 2016 (Surabaya, Indonesia, 19–22 July, 2016). The Proceedings are devoted to processing techniques, physics, mechanics, and applications of advanced materials. As such, they examine a wide spectrum of nanostructures, ferroelectric crystals, materials and composites, as well as other promising materials with special properties. They present nanotechnology approaches, modern environmentally friendly piezoelectric and ferromagnetic techniques, and physical and mechanical studies of the structural and physical-mechanical properties of the materials discussed. Further, a broad range of original mathematical and numerical methods is applied to solve various technological, mechanical and physical problems, which are inte resting for applications. Great attention is devoted to novel devices with high accuracy, longevity and extended possibilities to work in wide temperature and pressure ranges, aggressive media, etc., which show improved characteristics, defined by the developed materials and composites, opening new possibilities to study different physico-mechanical processes and phenomena.

Download or read book Piezoelectric Actuators and Generators for Energy Harvesting written by Sergey N. Shevtsov and published by Springer. This book was released on 2018-04-20 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents new approaches to R&D of piezoelectric actuators and generators of different types based on established, original constructions and contemporary research into framework of theoretical, experimental, and numerical methods of physics, mechanics, and materials science. Improved technical solutions incorporated into the devices demonstrate high output values of voltage and power, allowing application of the goods in various areas of energy harvesting. The book is divided into seven chapters, each presenting main results of the chapter, along with a brief exposition of novel findings from around the world proving context for the author’s results. It presents particular results of the Soviet and Russian schools of Mechanics and Material Sciences not previously available outside of Russia.

Download or read book Statistical Operator and Density Matrix written by Boris Vladimirovich Bondarev and published by Scientific Research Publishing, Inc. USA. This book was released on 2022-03-29 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the 2nd Annual International Conference on Material Machines and Methods for Sustainable Development MMMS2020 written by Banh Tien Long and published by Springer Nature. This book was released on 2021-03-26 with total page 1088 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected, peer-reviewed proceedings of the 2nd International Conference on Material, Machines and Methods for Sustainable Development (MMMS2020), held in the city of Nha Trang, Vietnam, from 12 to 15 November, 2020. The purpose of the conference is to explore and ensure an understanding of the critical aspects contributing to sustainable development, especially materials, machines and methods. The contributions published in this book come from authors representing universities, research institutes and industrial companies, and reflect the results of a very broad spectrum of research, from micro- and nanoscale materials design and processing, to mechanical engineering technology in industry. Many of the contributions selected for these proceedings focus on materials modeling, eco-material processes and mechanical manufacturing.

Download or read book Nanoscience and Nanoengineering written by Vjacheslav B. Dement'ev and published by CRC Press. This book was released on 2018-12-17 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents a selection of important information and discussion on the new scientific trend of chemical mesoscopics and also sheds new knowledge on the science of nanomaterials, processes of nanochemistry, and nanoengineering. The volume explores nanomaterial development as well as investigations of processes and modeling. It provides new perspectives on processes, while also discussing new methods of treatment polymeric materials and different material modification, including by super small quantities of metal/carbon nanocomposites. This volume will be a valuable resource on new trends on chemical mesoscopics, nanotechnology, and nanoengineering for researchers, scientists, professors, postgraduate students, and others.

Download or read book Proceedings of the 2015 International Conference on Physics Mechanics of New Materials and Their Applications Devoted to the 100th Anniversary of the Southern Federal University written by Ivan A. Parinov and published by Nova Science Publishers. This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced materials and composites, including piezoelectrics, nanomaterials, nanostructures, functional materials, polymeric composites and so on, are very important for modern sciences, technologies and techniques. This book presents processing techniques, physics, mechanics, chemistry and applications of advanced materials. It covers broad classes of modern materials, structures and composites with specific properties. Nanotechnology approaches, modern piezoelectric techniques, physical and mechanical studies of the structure-sensitive properties of the materials, modern methods and techniques of physical experiment, and more. This collection presents selected reports of the 2015 International Conference on "Physics, Mechanics of New Materials and Their Applications" (PHENMA 2015, May 19-22, 2015, Azov, Russia), devoted to the 100-year Anniversary of the Southern Federal University. The book is addressed to students, post-graduate students, scientists and engineers taking part in R&D of nanomaterials, piezoelectrics, magnetic and other advanced materials, as well as different devices which are based on these constituents demonstrating broad applications in different areas of science, technique and technology. This book includes new studies and results in the fields of condensed matter physics, materials science, physical and mechanical experiments, processing techniques and engineering of nanomaterials, piezoelectrics, other advanced materials and composites, and numerical methods and results. Also, different applications, developed devices and goods are critiqued and analysed.

Download or read book Applied Engineering Materials and Mechanics written by Jong Wan Hu and published by World Scientific. This book was released on 2016-07-14 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: ICAEMM2016 is an annual international conference that aims to present research outcomes undertaken in applied engineering, materials and mechanics. The book is a collection of 48 selected peer-reviewed articles, organized into three main chapters — advanced materials and power energy theory and studies; management technology and construction engineering applications; and mechanical and hydrology engineering design and applications. This conference brings together scientists, scholars, engineers and students from universities, research institutes and industries all over the world to share their latest research results. The conference also fosters collaboration among organizations and researchers alike in the areas of applied mechanics and materials science. Contents:The Mechanical Properties of SS400C3 Plate by CSP Produced Under the Hot Rolled Pickled Deep Drawing (Y X Liu, Y J Meng, W X Li, X Guan and B Yang)Effect of Extrusion Deformation on Microstructure Evolution of Spray-Formed 7055 Aluminum Alloy (Y Z Xiang, J S Qiao, P J Wang and H Zhang)Innovation Design of Flexible Manipulator by TRIZ (G H Gao and H Wang)Application of TRIZ Contradiction Theory in Innovative Design of the Potted Filling Soil Mechanism (G H Gao and F Li)Institutional Analysis of the Development and Policy on Sino–US Energy on Saving and New Energy Vehicles (W J Wu and L J Zhu)Improved Performance of LiCoO2 Cathode Enabled by Electrode Sputtering Coating with Al2O3 (X Y Dai, Y T Lu, A J Zhou, L P Wang, C Fan and J Z Li)Antimicrobial Finishing of Polyester Fabrics Using Silica Nanoparticles ( Weeranuch Kanjanapiboon, Supakit Achiwawanich, Potjanart Suwanruji and Jantip Setthayanond)Preparation and Characterization of Manganese Dioxide (MnO2) as a Cathode Catalyst for Direct Methanol Fuel Cells (Duangkamon Phuakkhaw, Atchana Wongchaisuwat, Siree Tangbunsuk and Pinsuda Viravathana)Numerical Simulation of the Energy Deposition in the HIPIB Irradiating Process of Ti Target (Ming Gao, Rui Hou, Yong You and Mengru Lv)Research on the Performance of the Offshore-Platform Air Filter Based on the Porous Medium Model (N Ye, T Sun, C-J Sun and Z-W Ma)Analysis of the Reasons Behind the Fracture of the 220kV Pipe Busbar Horizontal Line Clamp (Liu, Z-B Fan and M D Gao)Analysis of Hydrocarbons and Carbon Dioxide Emissions from Diesel Common Rail Engines and Finding the Correlation Between Velocity and Emissions in the Cases of Lancia Thesis and Citroen C4 (Lorenc Malka, Andonaq Londo, Alemayehug Gebremedhin and Klodian Dhoska)Effect of Na2O on Acid Resistance of Alumina-based Ceramic Proppant (J L Ma, B L Wu and T T Wu)The Application of Digital Technologies in Furniture Design (Jun Wang and Zhi Hui Wu)Research on the Bored Pile Construction Technique of Alternating Screw Drills and Percussion Drills (J-Y Shao, X-M Cao and Y-L Song)Research on Construction Technology of Color Steel Plate Roof in Situ Profiling and Installation (S Zhu, H-P Wang and X-X Meng)Study on a Flexible Manipulator Platform (G-H Gap and M Y Song)Effect of Pore Solution Alkalinity of Fly Ash-Cement Mixture on ASTM C 1260/C 1567 Mortar Bar Expansion (C-S Shon and Dan G Zollinger)Effect of Vibration Mixing on Performance of Recycled Concrete (S L Wang, S M Zhang, M M Zhang and W Liu)Research on Mechanical Strength and Residual Stress in Friction Stir Welds of Spatial 3-D Circular Structure (X C Song, F Cui, J S Gao, X S Feng and L J Guo)Cracking Pattern Analysis of Concrete Pavement on Asphalt Stabilized Base and Econo-Crete Base (Q Wang and L Qi)A Review of Coastal Hazard Management Performances (K H Kim and W Agnes)Mode Confusion for Estimating the Longitudinal Thermal Stress of Continuously Welded Rail (R Wang, Z J Yu and L Q Zhu)Investigation of Pore Size Distribution in Cement Paste Using Mercury Intrusion Porosimetry and Backscattered Electron Image Analysis (S X Feng and X G Sun)Impressed Current Cathodic Protection Behavior of Reinforced Concrete Specimen Using MMO Ti-Mesh Anode (J-A Jeong and E-S Jeong)The Unascertained Regression Analysis Method and Its Application in Building Material Sales Prediction (J L Chen and H B Zhang)Research on Inventory Control for Equipment Maintenance Spare Parts (X M Zhang, W Wu and H Z Ren)Impact of Environmental Regulation on Corporate Environmental Investment (Heng Ma and Jun Zhang)Using Frequency Sweep Strain Control to Study the Rheological Properties of Malaysian's Asphalt Binder (Mohammed Hadi Nahi, Ibrahim Kamaruddin, Salah E Zoorob and Madzlan Napiah)Numerical Simulation of Heated Concrete Failure on the Levels of the Meso-Structure (W H Wang and C Wang)Analysis of Warping Deformation of Laser Bracket Based on Moldflow (Weidong Wang, Song Jishun, Chen and Jiangping)Prediction Deterioration of Insulation Process Based on the Partial Discharge Thermal Fluctuation Theory (M N Dubyago, N K Poluyanovich and D V Burkov)A File Storage Service on a Cloud Computing Environment for Digital Libraries (Liu Jing)A Design Procedure for the Hinge System in a Heavy Foldable Container (Y-S Lee, D-K Lee and S-H Yoon)Viable Seismic Strengthening Solutions for RC Wide Beam-Column Joints (A Masi, G Santarsiero, A Mossucca and D Nigro)Optimization of Gas Turbine Fir-Tree Attachment Based on Redesigning the Transition Area with Double-Arc and Spline Curve (H M Zong, H L Tao, Q Gao and C Q Tan)Compensation of the Deformed Ram Spindle of a Horizontal Boring Machine (Y J Chen and J P Hung)Study on Motion Response of Spar Foundation Based on AWQA (K Fan, C H Jiang, H Lv and M Y Guo)Numerical Analysis on the Effects of Shoal on the Ship Wave (K H Kim and J S Seo)Investigation of Characteristics of Wave Induced Currents Using Hydraulic Model Experiment (K H Kim and J S Seo)The Design and Application of Motion Control System Based on PLCopen Standard (F S Li)Dye-Sensitized Solar Cells Using Liquid Phase Deposition Titania Thin Films (H J Chen, D T Kong, N Wang and H C He)Chebyshev Cardinal Functions for Solving Obstacle Boundary Value Problems (Zakieh Avazzadeh and Mohammad Heydari)Experimental Study on Linear Pressure Loss of Spray Hose (Y Gong, X Zhang, G Wang, X Chen, D J Liu and L Pei)MEMS Based Device for Steering Wheel Angle Experimental Measuring (Radu Drosescu and Silviu Zamfir)Mechanical Property Changes of KNO3 Salt Bath Nitrided Duplex Stainless Steel (Jamshid D Schurdjanov and I S Kim)Wastewaters Treatment and Drinking Water Purification with Complex Automated Electrolysis Unit (E Arakcheev, M Brunman, A Konyashin, V Brunman and A Petkova)Development and Application of Comprehensive Drought Evaluation Model for Irrigation District in North China (J Q Ma, Z W Zhang and R Weis) Readership: Academics, professionals, postgraduate and graduate students in materials engineering, materials science and applied mechanics.

Download or read book Mechanics and Materials Science written by Tao Chin-wang and published by World Scientific. This book was released on 2017-09-25 with total page 1284 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2016 International Conference on Mechanics and Materials Science (MMS2016) was held in Guangzhou, China on October 15-16, 2016. Aimed at providing an excellent international academic forum for all the researchers and practitioners, the conference attracted a wide spread participation among all over the universities and research institutes. MMS2016 features unique mixed topics of Mechatronics and Automation, Materials Science and Engineering, Materials Properties, Measuring Methods and Applications. This volume consists of 159 peer-reviewed articles by local and foreign eminent scholars, which cover the frontiers and hot topics in the relevant areas.

Download or read book Advanced Ferroelectric And Piezoelectric Materials With Improved Properties And Their Applications written by Ivan A Parinov and published by World Scientific. This book was released on 2024-03-14 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover the latest advances in ferroelectric and piezoelectric material sciences with this comprehensive monograph, divided into six chapters, each offering unique insights into the field.Chapter 1 delves into the manufacture and study of new ceramic materials, focusing on complex oxides of various metals (Aurivillius phases). The authors explore layered bismuth titanates and niobates, known for their high Curie temperature, and discuss how varying their chemical composition can lead to significant changes in their electrophysical properties. Chapter 2 explores the fascinating world of ferroelectrics — dielectrics with spontaneous polarization. Mathematical models and approaches of fractional calculus are used to understand the process of polarization switching in these materials, shedding light on the fractality of electrical responses. In Chapter 3, readers gain valuable insights into the inhomogeneous polarization process of polycrystalline ferroelectrics, a crucial stage in creating piezoceramic samples for energy converters. The authors present a comprehensive mathematical model that allows the determination of various characteristics, including dielectric and piezoelectric hysteresis loops and the effect of attenuation processes.Chapter 4 focuses on state-of-the-art piezoelectric energy harvesting, discussing theoretical, experimental, and computer modelling approaches. The authors discuss piezoelectric generators (PEGs) of different types (cantilever, stack and axis) and nonlinear effects arising at their operation. Chapter 5 presents expanded test and finite element models for cantilever-type and axial-type PEGs with active elements. The studies cover various structural and electric schemes of the PEGs with proof mass, bimorph and cylindrical piezoelectric elements, and excitation loads. Finally, Chapter 6 reviews some results in the last five years, obtained in modelling the vibration of devices from piezoactive materials, including five important effects: piezoelectric, flexoelectric, pyroelectric, piezomagnetic and flexomagnetic.As a diverse addition to the literature, this book is a relevant resource for researchers, engineers, and students seeking to expand their knowledge of cutting-edge developments in this exciting field.

Download or read book Modeling Synthesis and Fracture of Advanced Materials for Industrial and Medical Applications written by Sergei M. Aizikovich and published by Springer Nature. This book was released on 2020-08-12 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers papers presented at the international workshop PMSDAM’19. The respective contributions offer valuable insights for researchers working on numerical solutions to advanced materials problems. The problems concerning the remineralization of teeth are considered. Of particular interest are articles exploring topics at the interface of different disciplines.

Download or read book Advanced Materials Technology and Application written by Qingzhou Xu and published by World Scientific. This book was released on 2016-09-29 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2016 International Conference on Advanced Materials, Technology and Application (AMTA2016) was held in Changsha, China on March 18–20, 2016. The main objective of the joint conference is to provide a platform for researchers, academics and industrial professionals to present their research findings in the fields of advanced materials and technology. The AMTA2016 received more than 150 submissions, but only 59 articles were selected to be included in this proceedings, which are organized into 7 chapters; covering Chemical Materials, composite and Nano Materials, Polymer and Concrete Materials, Structural Materials, Metal and Alloy Materials, Electrical Materials, and Biomaterials. Contents:Chemical MaterialsComposite and Nano MaterialsPolymer and Concrete MaterialsStructural MaterialsMetal and Alloy MaterialsElectrical MaterialsBiomaterials Readership: Researchers and professionals in materials sciences.

Download or read book Proceedings of the 2018 International Conference on Physics Mechanics of New Materials and Their Applications written by Ivan A. Parinov and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The developed original principles and approaches for advanced materials and composites (ferro-piezoelectrics, nanostructures, functional materials and polymeric structures etc.) defines the main achievements and directions of modern natural and technical sciences, technologies, techniques and industry. Direct improvement of the materials and devices characteristics are based on numerous chemical, physical and mechanical studies, modern numerical approaches and methods of mathematical modeling and physical experiment. These PHENMA 2018 proceedings are devoted to development and solution of different actual problems into framework of the above-mentioned scientific directions. The proposed book presents interesting original results in theoretical, computational and experimental methods, which allow manufacturing nano-materials and composites (for example, ferro-piezoelectrical and environmentally-friendly), and other materials in different scale levels with before given and improved properties. The materials could be obtained due to reprocessing natural materials, wasters, fruits and plants. These proceedings also discuss results of mathematical modeling and experimental studies of advanced devices (piezoelectric transducers, energy-harvesters, different sensors, medical devices etc.). The presented studies are based on the new generation nano-materials, ferro-piezoelectrics and other structure-sensitive materials with special properties. The book treats promising modern nano- and microstructure techniques for manufacture of different novel materials (for example, nanostructures) and devices, which are very important for educational purposes and industry, unification and development of various expertises, designs and analyzes. The book presents new results of internationally recognized scientific teams in different areas of materials science, condensed matter physics, physical and mechanical theory and experiment, processing techniques and engineering of advanced materials and composites, numerical methods and numerous applications. These results are devoted to R&D of advanced piezo-ferroelectrics, nanostructures, other promising materials and composites with specific properties, based on the developed processing techniques and modern approaches of chemistry, physics, mechanics and materials science, and also wide spectrum of applications including industry and marketing. The book presents a wide spectrum of results, obtained on the base of original mathematical models, physical experiments, computer modeling, and nano- and piezoelectric applications. This collection presents 50 selected reports of the 2018 International Conference on "Physics, Mechanics of New Materials and Their Applications" (PHENMA 2018, August 9-11, 2018, Busan, South Korea), http://phenma2018.math.sfedu.ru. The book is addressed to students, post-graduate students, scientists and engineers, investigating and developing a new generation of nano-materials and nano-composites, piezo-ferroelectrics, other advanced materials with structure-sensitive properties, and also different devices, manufactured on their base and used in numerous applications in various areas of science, technique and technology. The book presents new research methods and scientific results in the condensed matter physics, materials science, physical and mechanical experiment, processing techniques and engineering of nanomaterials, piezoelectrics and other advanced materials and composites, numerical methods, and also different applications and developed devices.

Download or read book Improving Road Pavement Characteristics written by Alexander A. Lyapin and published by Springer Nature. This book was released on 2020-11-30 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents original technologies developed by the authors and existing Russian experience in study and application of technogenic raw materials (such as burnt rocks of mine dumps and ash-slag waste) to R&D of road constructions with high-strength properties and long-life operation. Another direction of the book is connected with finite-element modeling pavement constructions on different soils. To this aim, corresponding theoretical solutions and numerical algorithms are realized in ANSYS software. The obtained numerical results are compared with existing experimental data for real road constituents. It presents particular results of the Russian schools of Mechanics and Material Sciences not previously available outside of Russia. Explains original theoretical and experimental methods developed for solution of the problems of effective using technogenic waste in building and road constructions; Facilitates improvement and optimization of theoretical and numerical approaches for R&D of road pavements on different soils; Describes new promising building materials based on easily accessible waste able effectively to replace conventional materials and supported by Russian patents.