Download or read book Printing Technology for Flexible Substrates written by Publishing Interlingua Publishing and published by InterLingua Publishing. This book was released on 2006 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: A huge revolution is emerging in the format and manufacturing process of electronic devices including displays brought on by the use of plastic substrates and printing technology. Flexible substrates enable large displays that can be freely bent, lightweight, and easily transported, as a result. In addition, the new technology has the potential of achieving various new devices such as e-paper, a new display medium, which epitomizes the advantage of hard copy paper; solar cells which are 1/10 the weight; sensors that can be completely embedded in floors and personal clothing.This report analyzes the latest trends in the technology and materials surrounding the manufacturing process of flexible electronic devices, with the above exciting breakthrough features.
Download or read book Advanced Materials for Printed Flexible Electronics written by Colin Tong and published by Springer Nature. This book was released on 2021-10-04 with total page 641 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive introduction to printed flexible electronics and their applications, including the basics of modern printing technologies, printable inks, performance characterization, device design, modeling, and fabrication processes. A wide range of materials used for printed flexible electronics are also covered in depth. Bridging the gap between the creation of structure and function, printed flexible electronics have been explored for manufacturing of flexible, stretchable, wearable, and conformal electronics device with conventional, 3D, and hybrid printing technologies. Advanced materials such as polymers, ceramics, nanoparticles, 2D materials, and nanocomposites have enabled a wide variety of applications, such as transparent conductive films, thin film transistors, printable solar cells, flexible energy harvesting and storage devices, electroluminescent devices, and wearable sensors. This book provides students, researchers and engineers with the information to understand the current status and future trends in printed flexible electronics, and acquire skills for selecting and using materials and additive manufacturing processes in the design of printed flexible electronics.
Download or read book Hybrid Nanomaterials written by Rafael Vargas-Bernal and published by BoD – Books on Demand. This book was released on 2020-06-10 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two of the hottest research topics today are hybrid nanomaterials and flexible electronics. As such, this book covers both topics with chapters written by experts from across the globe. Chapters address hybrid nanomaterials, electronic transport in black phosphorus, three-dimensional nanocarbon hybrids, hybrid ion exchangers, pressure-sensitive adhesives for flexible electronics, simulation and modeling of transistors, smart manufacturing technologies, and inorganic semiconductors.
Download or read book Flexible Electronics written by William S. Wong and published by Springer Science & Business Media. This book was released on 2009-04-09 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: This excellent volume covers a range of materials used for flexible electronics, including semiconductors, dielectrics, and metals. The functional integration of these different materials is treated as well. Fundamental issues for both organic and inorganic materials systems are included. A corresponding overview of technological applications, based on each materials system, is presented to give both the non-specialist and the researcher in the field relevant information on the status of the flexible electronics area.
Download or read book Flexible and Wearable Electronics for Smart Clothing written by Gang Wang and published by John Wiley & Sons. This book was released on 2020-02-24 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides the state-of-the-art on wearable technology for smart clothing The book gives a coherent overview of recent development on flexible electronics for smart clothing with emphasis on wearability and durability of the materials and devices. It offers detailed information on the basic functional components of the flexible and wearable electronics including sensing, systems-on-a-chip, interacting, and energy, as well as the integrating and connecting of electronics into textile form. It also provides insights into the compatibility and integration of functional materials, electronics, and the clothing technology. Flexible and Wearable Electronics for Smart Clothing offers comprehensive coverage of the technology in four parts. The first part discusses wearable organic nano-sensors, stimuli-responsive electronic skins, and flexible thermoelectrics and thermoelectric textiles. The next part examines textile triboelectric nanogenerators for energy harvesting, flexible and wearable solar cells and supercapacitors, and flexible and wearable lithium-ion batteries. Thermal and humid management for next-generation textiles, functionalization of fiber materials for washable smart wearable textiles, and flexible microfluidics for wearable electronics are covered in the next section. The last part introduces readers to piezoelectric materials and devices based flexible bio-integrated electronics, printed electronics for smart clothes, and the materials and processes for stretchable and wearable e-textile devices. -Presents the most recent developments in wearable technology such as wearable nanosensors, logic circuit, artificial intelligence, energy harvesting, and wireless communication -Covers the flexible and wearable electronics as essential functional components for smart clothing from sensing, systems-on-a-chip, interacting, energy to the integrating and connecting of electronics -Of high interest to a large and interdisciplinary target group, including materials scientists, textile chemists, and electronic engineers in academia and industry Flexible and Wearable Electronics for Smart Clothing will appeal to materials scientists, textile industry professionals, textile engineers, electronics engineers, and sensor developers.
Download or read book Robotic Tactile Sensing written by Ravinder S. Dahiya and published by Springer Science & Business Media. This book was released on 2012-07-29 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Future robots are expected to work closely and interact safely with real-world objects and humans alike. Sense of touch is important in this context, as it helps estimate properties such as shape, texture, hardness, material type and many more; provides action related information, such as slip detection; and helps carrying out actions such as rolling an object between fingers without dropping it. This book presents an in-depth description of the solutions available for gathering tactile data, obtaining aforementioned tactile information from the data and effectively using the same in various robotic tasks. The efforts during last four decades or so have yielded a wide spectrum of tactile sensing technologies and engineered solutions for both intrinsic and extrinsic touch sensors. Nowadays, new materials and structures are being explored for obtaining robotic skin with physical features like bendable, conformable, and stretchable. Such features are important for covering various body parts of robots or 3D surfaces. Nonetheless, there exist many more hardware, software and application related issues that must be considered to make tactile sensing an effective component of future robotic platforms. This book presents an in-depth analysis of various system related issues and presents the trade-offs one may face while developing an effective tactile sensing system. For this purpose, human touch sensing has also been explored. The design hints coming out of the investigations into human sense of touch can be useful in improving the effectiveness of tactile sensory modality in robotics and other machines. Better integration of tactile sensors on a robot’s body is prerequisite for the effective utilization of tactile data. The concept of semiconductor devices based sensors is an interesting one, as it allows compact and fast tactile sensing systems with capabilities such as human-like spatio-temporal resolution. This book presents a comprehensive description of semiconductor devices based tactile sensing. In particular, novel Piezo Oxide Semiconductor Field Effect Transistor (POSFET) based approach for high resolution tactile sensing has been discussed in detail. Finally, the extension of semiconductors devices based sensors concept to large and flexile areas has been discussed for obtaining robotic or electronic skin. With its multidisciplinary scope, this book is suitable for graduate students and researchers coming from diverse areas such robotics (bio-robots, humanoids, rehabilitation etc.), applied materials, humans touch sensing, electronics, microsystems, and instrumentation. To better explain the concepts the text is supported by large number of figures.
Download or read book Environmental Chemical and Medical Sensors written by Shantanu Bhattacharya and published by Springer. This book was released on 2017-12-22 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the fundamentals of sensor technologies as well as the recent research for the development of environmental, chemical and medical sensor technologies. Chapters include current research on microflow cytometry, microfluidic devices, colorimetric sensors, and the development of low-cost optical densitometric sensors and paper based analytical devices for environmental and biomedical applications. Special focus has been given to nanotechnology and nanostructures- their fabrication, uses and utility in different fields of research such as for the design of tools for medical diagnostics, therapeutics, as well as for detection and estimation of pollutant levels in water and air quality monitoring. This book is intended as a resource for researchers working in the field of sensor development across the world.
Download or read book The Flexible Electronics Opportunity written by National Research Council (U.S.). Committee on Best Practice in National Innovation Programs for Flexible Electronics and published by National Academies Press. This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flexible electronics describes circuits that can bend and stretch, enabling significant versatility in applications and the prospect of low-cost manufacturing processes. They represent an important technological advance, in terms of their performance characteristics and potential range of applications, ranging from medical care, packaging, lighting and signage, consumer electronics and alternative energy (especially solar energy.) What these technologies have in common is a dependence on efficient manufacturing that currently requires improved technology, processes, tooling, and materials, as well as ongoing research. Seeking to capture the global market opportunity in flexible electronics, major U.S. competitors have initiated dedicated programs that are large in scope and supported with significant government funding to develop and acquire these new technologies, refine them, and ultimately manufacture them within their national borders. These national and regional investments are significantly larger than U.S. investment and more weighted toward later stage applied research and development. The Flexible Electronics Opportunity examines and compares selected innovation programs both foreign and domestic, and their potential to advance the production of flexible electronics technology in the United States. This report reviews the goals, concept, structure, operation, funding levels, and evaluation of foreign programs similar to major U.S. programs, e.g., innovation awards, S&T parks, and consortia. The report describes the transition of flexible electronics research into products and to makes recommendations to improve and to develop U.S. programs. Through an examination of the role of research consortia around the world to advance flexible electronics technology, the report makes recommendations for steps that the U.S. might consider to develop a robust industry in the United States. Significant U.S. expansion in the market for flexible electronics technologies is not likely to occur in the absence of mechanisms to address investment risks, the sharing of intellectual property, and the diverse technology requirements associated with developing and manufacturing flexible electronics technologies. The Flexible Electronics Opportunity makes recommendations for collaboration among industry, universities, and government to achieve the critical levels of investment and the acceleration of new technology development that are needed to catalyze a vibrant flexible electronics industry.
Download or read book Introduction to Printed Electronics written by Katsuaki Suganuma and published by Springer Science & Business Media. This book was released on 2014-01-24 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes in detail modern technologies for printed electronics, explaining how nanotechnology and modern printing technology are merging to revolutionize electronics fabrication of thin, lightweight, large and inexpensive products. Readers will benefit from the explanations of materials, devices and circuits used to design and implement the latest applications of printed electronics, such as thin flexible OLED displays, organic solar cells, OLED lighting, smart wallpaper, sensors, logic, memory and more.
Download or read book Nanomaterials for 2D and 3D Printing written by Shlomo Magdassi and published by John Wiley & Sons. This book was released on 2017-06-06 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book to paint a complete picture of the challenges of processing functional nanomaterials for printed electronics devices, and additive manufacturing fabrication processes. Following an introduction to printed electronics, the book focuses on various functional nanomaterials available, including conducting, semi-conducting, dielectric, polymeric, ceramic and tailored nanomaterials. Subsequent sections cover the preparation and characterization of such materials along with their formulation and preparation as inkjet inks, as well as a selection of applications. These include printed interconnects, passive and active modules, as well as such high-tech devices as solar cells, transparent electrodes, displays, touch screens, sensors, RFID tags and 3D objects. The book concludes with a look at the future for printed nanomaterials. For all those working in the field of printed electronics, from entrants to specialized researchers, in a number of disciplines ranging from chemistry and materials science to engineering and manufacturing, in both academia and industry.
Download or read book Printed Electronics written by Zheng Cui and published by John Wiley & Sons. This book was released on 2016-09-26 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of the newly emerged and highly interdisciplinary field of printed electronics • Provides an overview of the latest developments and research results in the field of printed electronics • Topics addressed include: organic printable electronic materials, inorganic printable electronic materials, printing processes and equipments for electronic manufacturing, printable transistors, printable photovoltaic devices, printable lighting and display, encapsulation and packaging of printed electronic devices, and applications of printed electronics • Discusses the principles of the above topics, with support of examples and graphic illustrations • Serves both as an advanced introductory to the topic and as an aid for professional development into the new field • Includes end of chapter references and links to further reading
Download or read book Printing on Polymers written by Joanna Izdebska and published by William Andrew. This book was released on 2015-09-24 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Printing on Polymers: Fundamentals and Applications is the first authoritative reference covering the most important developments in the field of printing on polymers, their composites, nanocomposites, and gels. The book examines the current state-of-the-art and new challenges in the formulation of inks, surface activation of polymer surfaces, and various methods of printing. The book equips engineers and materials scientists with the tools required to select the correct method, assess the quality of the result, reduce costs, and keep up-to-date with regulations and environmental concerns. Choosing the correct way of decorating a particular polymer is an important part of the production process. Although printing on polymeric substrates can have desired positive effects, there can be problems associated with various decorating techniques. Physical, chemical, and thermal interactions can cause problems, such as cracking, peeling, or dulling. Safety, environmental sustainability, and cost are also significant factors which need to be considered. With contributions from leading researchers from industry, academia, and private research institutions, this book serves as a one-stop reference for this field—from print ink manufacture to polymer surface modification and characterization; and from printing methods to applications and end-of-life issues. Enables engineers to select the correct decoration method for each material and application, assess print quality, and reduce costs Increases familiarity with the terminology, tests, processes, techniques, and regulations of printing on plastic, which reduces the risk of adverse reactions, such as cracking, peeling, or dulling of the print Addresses the issues of environmental impact and cost when printing on polymeric substrates Features contributions from leading researchers from industry, academia, and private research institutions
Download or read book Flexible and Stretchable Electronics written by Run-Wei Li and published by CRC Press. This book was released on 2019-10-31 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the recently well developed areas of Internet of Thing, consumer wearable gadgets and artificial intelligence, flexible and stretchable electronic devices have spurred great amount of interest from both the global scientific and industrial communities. As an emerging technology, flexible and stretchable electronics requires the scale-span fabrication of devices involving nano-features, microstructures and macroscopic large area manufacturing. The key factor behind covers the organic, inorganic and nano materials that exhibit completely different mechanical and electrical properties, as well as the accurate interfacial control between these components. Based on the fusion of chemistry, physics, biology, materials science and information technology, this review volume will try to offer a timely and comprehensive overview on the flexible and stretchable electronic materials and devices. The book will cover the working principle, materials selection, device fabrication and applications of electronic components of transistors, solar cells, memories, sensors, supercapacitors, circuits and etc.
Download or read book Printed Flexible Sensors written by Anindya Nag and published by Springer. This book was released on 2019-03-11 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent advances in the design, fabrication and implementation of flexible printed sensors. It explores a range of materials for developing the electrode and substrate parts of the sensors, on the basis of their electrical and mechanical characteristics. The sensors were processed using laser cutting and 3D printing techniques, and the sensors developed were employed in a number of healthcare, environmental and industrial applications, including: monitoring of physiological movements, respiration, salinity and nitrate measurement, and tactile sensing. The type of sensor selected for each application depended on its dimensions, robustness and sensitivity. The sensors fabricated were also embedded in an IoT-based system, allowing them to be integrated into real-time applications.
Download or read book Flexible Carbon based Electronics written by Paolo Samorì and published by John Wiley & Sons. This book was released on 2019-02-11 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third volume in the Advanced Nanocarbon Materials series covers the topic of flexible electronics both from a materials and an applications perspective. Comprehensive in its scope, the monograph examines organic, inorganic and composite materials with a section devoted to carbon-based materials with a special focus on the generation and properties of 2D materials. It also presents carbon modifications and derivatives, such as carbon nanotubes, graphene oxide and diamonds. In terms of the topical applications covered these include, but are not limited to, flexible displays, organic electronics, transistors, integrated circuits, semiconductors and solar cells. These offer perspectives for today?s energy and healthcare challenges, such as electrochemical energy storage and wearable devices. Finally, a section on fundamental properties and characterization approaches of flexible electronics rounds off the book. Each contribution points out the importance of the structure-function relationship for the target-oriented fabrication of electronic devices, enabling the design of complex components.
Download or read book Technology Guide written by Hans-Jörg Bullinger and published by Springer Science & Business Media. This book was released on 2009-05-10 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Use this technology guide to find descriptions of today’s most essential global technologies. Clearly structured and simply explained, the book’s reference format invites even the casual reader to explore the stimulating innovative ideas it contains.
Download or read book The Chemistry of Inkjet Inks written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
