Download or read book Power Electronics with MATLAB written by L. Ashok Kumar and published by Cambridge University Press. This book was released on 2017-11-24 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Discusses the essential concepts of power electronics through MATLAB examples and simulations"--

Download or read book Power Electronic Converters written by Narayanaswamy P R Iyer and published by CRC Press. This book was released on 2018-03-09 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a step-by-step method for the development of a virtual interactive power electronics laboratory. The book is suitable for undergraduates and graduates for their laboratory course and projects in power electronics. It is equally suitable for professional engineers in the power electronics industry. The reader will learn to develop interactive virtual power electronics laboratory and perform simulations of their own, as well as any given power electronic converter design using SIMULINK with advanced system model and circuit component level model. Features Examples and Case Studies included throughout. Introductory simulation of power electronic converters is performed using either PSIM or MICROCAP Software. Covers interactive system model developed for three phase Diode Clamped Three Level Inverter, Flying Capacitor Three Level Inverter, Five Level Cascaded H-Bridge Inverter, Multicarrier Sine Phase Shift PWM and Multicarrier Sine Level Shift PWM. System models of power electronic converters are verified for performance using interactive circuit component level models developed using Simscape-Electrical, Power Systems and Specialized Technology block set. Presents software in the loop or Processor in the loop simulation with a power electronic converter examples.

Download or read book Introduction to Microcontroller Programming for Power Electronics Control Applications written by Mattia Rossi and published by CRC Press. This book was released on 2021-09-29 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: develops key concepts from scratch, including a brief review of control theory and modeling strategies for power electronic-based systems focuses on the LaunchPadTM F28069M board from Texas InstrumentsTM to provide the reader some basic programming strategies proposes several control problems in terms of power management of RL and RLC loads (e.g. DC-DC converters) and closed-loop control of DC motors examines control schemes as well as the working principles of power converter topologies needed to drive the systems under investigation includes exercises while presenting a processor-in-the loop (PIL) technique to emulate the dynamics of complex systems

Download or read book PID and Predictive Control of Electrical Drives and Power Converters using MATLAB Simulink written by Liuping Wang and published by John Wiley & Sons. This book was released on 2015-03-02 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: A timely introduction to current research on PID and predictive control by one of the leading authors on the subject PID and Predictive Control of Electric Drives and Power Supplies using MATLAB/Simulink examines the classical control system strategies, such as PID control, feed-forward control and cascade control, which are widely used in current practice. The authors share their experiences in actual design and implementation of the control systems on laboratory test-beds, taking the reader from the fundamentals through to more sophisticated design and analysis. The book contains sections on closed-loop performance analysis in both frequency domain and time domain, presented to help the designer in selection of controller parameters and validation of the control system. Continuous-time model predictive control systems are designed for the drives and power supplies, and operational constraints are imposed in the design. Discrete-time model predictive control systems are designed based on the discretization of the physical models, which will appeal to readers who are more familiar with sampled-data control system. Soft sensors and observers will be discussed for low cost implementation. Resonant control of the electric drives and power supply will be discussed to deal with the problems of bias in sensors and unbalanced three phase AC currents. Brings together both classical control systems and predictive control systems in a logical style from introductory through to advanced levels Demonstrates how simulation and experimental results are used to support theoretical analysis and the proposed design algorithms MATLAB and Simulink tutorials are given in each chapter to show the readers how to take the theory to applications. Includes MATLAB and Simulink software using xPC Target for teaching purposes A companion website is available Researchers and industrial engineers; and graduate students on electrical engineering courses will find this a valuable resource.

Download or read book Electrotechnical Systems written by Viktor Perelmuter and published by CRC Press. This book was released on 2020-10-15 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling a gap in the literature, Electrotechnical Systems: Simulation with Simulink® and SimPowerSystemsTM explains how to simulate complicated electrical systems more easily using SimPowerSystemsTM blocks. It gives a comprehensive overview of the powerful SimPowerSystems toolbox and demonstrates how it can be used to create and investigate models of both classic and modern electrotechnical systems. Build from Circuit Elements and Blocks to System Models Building from simple to more complex topics, the book helps readers better understand the principles, features, and detailed functions of various electrical systems, such as electrical drives, power electronics, and systems for production and distribution of electrical energy. The text begins by describing the models of the main circuit elements, which are used to create the full system model, and the measuring and control blocks. It then examines models of semiconductor devices used in power electronics as well as models of DC and AC motors. The final chapter discusses the simulation of power production and transmission systems, including hydraulic turbine, steam turbine, wind, and diesel generators. The author also develops models of systems that improve the quality of electrical energy, such as active filters and various types of static compensators. Get a Deeper Understanding of Electrical Systems and How to Simulate Them A companion CD supplies nearly 100 models of electrotechnical systems created using SimPowerSystems. These encompass adaptations of SimPowerSystems demonstrational models, as well as models developed by the author, including many important applications related to power electronics and electrical drives, which are not covered by the demonstrational models. In addition to showing how the models can be used, he supplies the theoretical background for each. Offering a solid understanding of how electrical systems function, this book guides readers to use SimPowerSystems to create and investigate electrical systems, including those under development, more effectively.

Download or read book Power Electronics with MATLAB written by Vinod Kumar and published by . This book was released on 200? with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book PSPICE and MATLAB for Electronics written by John Okyere Attia and published by CRC Press. This book was released on 2010-06-23 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Used collectively, PSPICE and MATLAB are unsurpassed for circuit modeling and data analysis. PSPICE can perform DC, AC, transient, Fourier, temperature, and Monte Carlo analysis of electronic circuits with device models and subsystem subcircuits. MATLAB can then carry out calculations of device parameters, curve fitting, numerical integration, nume

Download or read book Fundamentals of Power Electronics with MATLAB written by Randall Alan Shaffer and published by Firewall Media. This book was released on 2013-11 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written for students studying power electronics and practicing engineering refreshing their skills and knowledge, this book includes an example based on the section material, followed by a detailed solution. It also takes an innovative by modeling the periodic waveforms of the circuits as angular functions rather than time functions.

Download or read book Fundamentals of Electric Machines A Primer with MATLAB written by Warsame Hassan Ali and published by CRC Press. This book was released on 2019-06-12 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: An electric machine is a device that converts mechanical energy into electrical energy or vice versa. It can take the form of an electric generator, electric motor, or transformer. Electric generators produce virtually all electric power we use all over the world. Electric machine blends the three major areas of electrical engineering: power, control and power electronics. This book presents the relation of power quantities for the machine as the current, voltage power flow, power losses, and efficiency. This book will provide a good understanding of the behavior and its drive, beginning with the study of salient features of electrical dc and ac machines.

Download or read book Modeling Power Electronics and Interfacing Energy Conversion Systems written by M. Godoy Simoes and published by John Wiley & Sons. This book was released on 2016-09-16 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discusses the application of mathematical and engineering tools for modeling, simulation and control oriented for energy systems, power electronics and renewable energy This book builds on the background knowledge of electrical circuits, control of dc/dc converters and inverters, energy conversion and power electronics. The book shows readers how to apply computational methods for multi-domain simulation of energy systems and power electronics engineering problems. Each chapter has a brief introduction on the theoretical background, a description of the problems to be solved, and objectives to be achieved. Block diagrams, electrical circuits, mathematical analysis or computer code are covered. Each chapter concludes with discussions on what should be learned, suggestions for further studies and even some experimental work. Discusses the mathematical formulation of system equations for energy systems and power electronics aiming state-space and circuit oriented simulations Studies the interactions between MATLAB and Simulink models and functions with real-world implementation using microprocessors and microcontrollers Presents numerical integration techniques, transfer-function modeling, harmonic analysis and power quality performance assessment Examines existing software such as, MATLAB/Simulink, Power Systems Toolbox and PSIM to simulate power electronic circuits including the use of renewable energy sources such as wind and solar sources The simulation files are available for readers who register with the Google Group: power-electronics-interfacing-energy-conversion-systems@googlegroups.com. After your registration you will receive information in how to access the simulation files, the Google Group can also be used to communicate with other registered readers of this book.

Download or read book Power Electronics Step by Step Design Modeling Simulation and Control written by Weidong Xiao and published by McGraw Hill Professional. This book was released on 2021-02-05 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore the latest power electronics principles, practices, and applications This electrical engineering guide offers comprehensive coverage of design, modeling, simulation, and control for power electronics. The book describes real-world applications for the technology and features case studies worked out in both MATLAB and Simulink. Presented in an accessible style, Power Electronics Step-by-Step: Design, Modeling, Simulation, and Control focuses on the latest technologies, such as DC-based systems, and emphasizes the averaging technique for both simulation and modeling. You will get photos, diagrams, flowcharts, graphs, equations, and tables that illustrate each topic. Circuit components Non-isolated DC/DC conversion Power analysis DC to single-phase AC conversion Single-phase AC to DC conversion Galvanic isolated DC/DC conversion Power conversion for three-phase AC Bidirectional power conversion Averaging model for simulation Dynamic modeling of DC/DC converters Regulation of voltage and current

Download or read book Electronics and Circuit Analysis Using MATLAB written by John Okyere Attia and published by CRC Press. This book was released on 2018-10-08 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of MATLAB is ubiquitous in the scientific and engineering communities today, and justifiably so. Simple programming, rich graphic facilities, built-in functions, and extensive toolboxes offer users the power and flexibility they need to solve the complex analytical problems inherent in modern technologies. The ability to use MATLAB effectively has become practically a prerequisite to success for engineering professionals. Like its best-selling predecessor, Electronics and Circuit Analysis Using MATLAB, Second Edition helps build that proficiency. It provides an easy, practical introduction to MATLAB and clearly demonstrates its use in solving a wide range of electronics and circuit analysis problems. This edition reflects recent MATLAB enhancements, includes new material, and provides even more examples and exercises. New in the Second Edition: Thorough revisions to the first three chapters that incorporate additional MATLAB functions and bring the material up to date with recent changes to MATLAB A new chapter on electronic data analysis Many more exercises and solved examples New sections added to the chapters on two-port networks, Fourier analysis, and semiconductor physics MATLAB m-files available for download Whether you are a student or professional engineer or technician, Electronics and Circuit Analysis Using MATLAB, Second Edition will serve you well. It offers not only an outstanding introduction to MATLAB, but also forms a guide to using MATLAB for your specific purposes: to explore the characteristics of semiconductor devices and to design and analyze electrical and electronic circuits and systems.

Download or read book Practical Electrical Engineering written by Sergey N. Makarov and published by Springer. This book was released on 2016-06-27 with total page 987 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides comprehensive, in-depth coverage of the fundamental concepts of electrical engineering. It is written from an engineering perspective, with special emphasis on circuit functionality and applications. Reliance on higher-level mathematics and physics, or theoretical proofs has been intentionally limited in order to prioritize the practical aspects of electrical engineering. This text is therefore suitable for a number of introductory circuit courses for other majors such as mechanical, biomedical, aerospace, civil, architecture, petroleum, and industrial engineering. The authors’ primary goal is to teach the aspiring engineering student all fundamental tools needed to understand, analyze and design a wide range of practical circuits and systems. Their secondary goal is to provide a comprehensive reference, for both major and non-major students as well as practicing engineers.

Download or read book Power Systems Analysis Illustrated with MATLAB and ETAP written by Hemchandra Madhusudan Shertukde and published by CRC Press. This book was released on 2019-01-15 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrical power is harnessed using several energy sources, including coal, hydel, nuclear, solar, and wind. Generated power is needed to be transferred over long distances to support load requirements of customers, viz., residential, industrial, and commercial. This necessitates proper design and analysis of power systems to efficiently control the power flow from one point to the other without delay, disturbance, or interference. Ideal for utility and power system design professionals and students, this book is richly illustrated with MATLAB® and Electrical Transient Analysis Program (ETAP®) to succinctly illustrate concepts throughout, and includes examples, case studies, and problems. Features Illustrated throughout with MATLAB and ETAP Proper use of positive/negative/zero sequence analysis of a given one-line diagram (OLD) associated with a grid, as well as finger-holding instructions to tackle a power system analysis (PSA) problem for a given OLD of a grid On-line evaluation of power flow, short-circuit analysis, and related PSA for a given OLD Appropriately learn the finer nuances of designing the several components of a PSA, including transmission lines, transformers, generators/motors, and illustrate the corresponding equivalent circuit Case studies from utilities and independent system operators

Download or read book Renewable Energy Devices and Systems with Simulations in MATLAB and ANSYS written by Frede Blaabjerg and published by CRC Press. This book was released on 2017-05-18 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to the increasing world population, energy consumption is steadily climbing, and there is a demand to provide solutions for sustainable and renewable energy production, such as wind turbines and photovoltaics. Power electronics are being used to interface renewable sources in order to maximize the energy yield, as well as smoothly integrate them within the grid. In many cases, power electronics are able to ensure a large amount of energy saving in pumps, compressors, and ventilation systems. This book explains the operations behind different renewable generation technologies in order to better prepare the reader for practical applications. Multiple chapters are included on the state-of-the-art and possible technology developments within the next 15 years. The book provides a comprehensive overview of the current renewable energy technology in terms of system configuration, power circuit usage, and control. It contains two design examples for small wind turbine system and PV power system, respectively, which are useful for real-life installation, as well as many computer simulation models.

Download or read book Circuit Systems with MATLAB and PSpice written by Won Y. Yang and published by Won Y. Yang. This book was released on 2012-03-02 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1. Instead of the conventional method using the general/particular solutions to solve differential equations for the circuits containing inductors/capacitors, this book lays emphasis on the Laplace transform method for solving differential equations. We recommend taking the Laplace transform of electric circuits (containing inductors/capacitors) and setting up the transformed circuit equations directly in the unified framework (as if they were just made of resistors and sources) rather than setting up the circuit equations in the form of differential equations and then taking their Laplace transforms to solve them. The Laplace transform and the inverse Laplace transform are introduced in the Appendix. 2. This book presents several MATLAB programs that can be used to get the Laplace transformed solutions, take their inverse Laplace transforms, and plot the solutions along the time or frequency axis. The MATLAB programs can save a lot of time and effort for obtaining the solutions in the time domain or frequency domain so that readers can concentrate on establishing circuit equations, gaining insights to the problems, and making observations/interpretations of the solutions. 3. This book also introduces step by step how to use OrCAD/PSpice for circuit simulations. For circuit problems taking much time to solve by hand, the readers are recommended to use MATLAB and PSpice. This approach gives the readers not only information about the state of the art, but also self-confidence on the condition that the graphical solutions obtained by using the two software tools agree with each other. The OrCAD/PSpice is introduced in the Appendix. However, the portion of MATLAB and PSpice is kept not large lest the readers should be addicted to just using the software and tempted to neglect the importance of the basic circuit theory. 4. We make each example show something different from other examples so that readers can efficiently acquire the essential circuit analysis techniques and gain insights into the various types of circuits. On the other hand, instead of repeating similar exercise problems, we make most exercise problems arouse readers’ interest in practical application or help form a view for circuit application and design. 5. For representative examples, the analytical solutions are presented together with the results of MATLAB analysis (close to the theory) and PSpice simulation (close to the experiment) in the form of trinity. We are sure that this style of presentation will interest many students, attracting their attention to the topics on circuits efficiently. 6. Unlike most circuit books with a similar title, our book deals with positive-feedback op-amp circuits as well as negative-feedback op-amp circuits.

Download or read book Power Electronics and Motor Drive Systems written by Stefanos Manias and published by Academic Press. This book was released on 2016-11-08 with total page 1008 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Electronics and Motor Drive Systems is designed to aid electrical engineers, researchers, and students to analyze and address common problems in state-of-the-art power electronics technologies. Author Stefanos Manias supplies a detailed discussion of the theory of power electronics circuits and electronic power conversion technology systems, with common problems and methods of analysis to critically evaluate results. These theories are reinforced by simulation examples using well-known and widely available software programs, including SPICE, PSIM, and MATLAB/SIMULINK. Manias expertly analyzes power electronic circuits with basic power semiconductor devices, as well as the new power electronic converters. He also clearly and comprehensively provides an analysis of modulation and output voltage, current control techniques, passive and active filtering, and the characteristics and gating circuits of different power semiconductor switches, such as BJTs, IGBTs, MOSFETs, IGCTs, MCTs and GTOs. Includes step-by-step analysis of power electronic systems Reinforced by simulation examples using SPICE, PSIM, and MATLAB/SIMULINK Provides 110 common problems and solutions in power electronics technologies