Download or read book Polyolefins 50 years after Ziegler and Natta II written by Walter Kaminsky and published by Springer. This book was released on 2013-11-29 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Polymer Science enjoys a longstanding tradition and good reputation in its community. Each volume is dedicated to a current topic, and each review critically surveys one aspect of that topic, to place it within the context of the volume. The volumes typically summarize the significant developments of the last 5 to 10 years and discuss them critically, presenting selected examples, explaining and illustrating the important principles, and bringing together many important references of primary literature. On that basis, future research directions in the area can be discussed. Advances in Polymer Science volumes thus are important references for every polymer scientist, as well as for other scientists interested in polymer science - as an introduction to a neighboring field, or as a compilation of detailed information for the specialist.
Download or read book Polyolefins 50 years after Ziegler and Natta I written by Walter Kaminsky and published by Springer. This book was released on 2013-12-19 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Polymer Science enjoys a longstanding tradition and good reputation in its community. Each volume is dedicated to a current topic, and each review critically surveys one aspect of that topic, to place it within the context of the volume. The volumes typically summarize the significant developments of the last 5 to 10 years and discuss them critically, presenting selected examples, explaining and illustrating the important principles, and bringing together many important references of primary literature. On that basis, future research directions in the area can be discussed. Advances in Polymer Science volumes thus are important references for every polymer scientist, as well as for other scientists interested in polymer science - as an introduction to a neighboring field, or as a compilation of detailed information for the specialist.
Download or read book Advances in Polymer Science written by and published by . This book was released on 1987 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Alkenes written by Reza Davarnejad and published by BoD – Books on Demand. This book was released on 2021-11-03 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alkenes, which have carbon-carbon double bonds, are chemicals and energy sources that play an important role in human life, including economics and the environment. This book examines the production and synthesis of alkenes, olefins, and polyolefins, as well as environmental issues faced during industrial production of these hydrocarbons. It also discusses eco-friendly and green separation techniques.
Download or read book Hydrocarbon Chemistry 2 Volume Set written by George A. Olah and published by John Wiley & Sons. This book was released on 2017-10-02 with total page 1195 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an unparalleled contemporary assessment of hydrocarbon chemistry – presenting basic concepts, current research, and future applications. • Comprehensive and updated review and discussion of the field of hydrocarbon chemistry • Includes literature coverage since the publication of the previous edition • Expands or adds coverage of: carboxylation, sustainable hydrocarbons, extraterrestrial hydrocarbons • Addresses a topic of special relevance in contemporary science, since hydrocarbons play a role as a possible replacement for coal, petroleum oil, and natural gas as well as their environmentally safe use • Reviews of prior edition: “...literature coverage is comprehensive and ideal for quickly reviewing specific topics...of most value to industrial chemists...” (Angewandte Chemie) and “...useful for chemical engineers as well as engineers in the chemical and petrochemical industries.” (Petroleum Science and Technology)
Download or read book Polypropylene Handbook written by József Karger-Kocsis and published by Springer. This book was released on 2019-03-18 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book extensively reviews Polypropylene (PP), the second most widely produced thermoplastic material, having been produced for over 60 years. Its synthesis, processing and application are still accompanied by vigorous R&D developments because the properties of PP are at the borderline between those of commodity and engineering thermoplastics. Readers are introduced to various tacticities and polymorphs of PP, and their effects on structural properties. Further, the book addresses the control of optical properties using nucleants, provides strategies for overcoming the limited cold/impact resistance of PP, examines in detail the effects of recycling, and presents guidelines for the property modification of PPs through foaming, filling and reinforcing with respect to target applications. Special attention is paid to descriptions and models of properties as a function of morphological variables. Last but not least, the book suggests potential practical applications of PP-based systems, especially in the packaging, appliances, building/construction, textile and automotive sectors. Each chapter, written by internationally respected scientists, reflects the current state-of-art in the respective field and offers a vital source of information for students, researchers and engineers interested in the morphology, properties, testing and modeling of PP and PP-based systems. The content is indispensable to the appropriate application of PPs and related composites.
Download or read book Multimodal Polymers with Supported Catalysts written by Alexandra Romina Albunia and published by Springer. This book was released on 2019-01-16 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of polyolefine production, including several recent breakthrough innovations in the fields of catalysis, process technology, and materials design. The industrial development of polymers is an extraordinary example of multidisciplinary cooperation, involving experts from different fields. An understanding of structure-property and processing relationships leads to the design of materials with innovative performance profiles. A comprehensive description of the connection between innovative material performance and multimodal polymer design, which incorporates both flexibility and constraints of multimodal processes and catalyst needs, is provided. This book provides a summary of the polymerization process, from the atomistic level to the macroscale, process components, including catalysts, and their influence on final polymer performance. This reference merges academic research and industrial knowledge to fill the gaps between academic research and industrial processes. · Connects innovative material performance to the flexibility of multimodal polymer design processes; · Provides a comprehensive description of the polymerization process from the atomic level to the macroscale; · Presents a polyhedric view of multimodal polymer production, including structure, property, and processing relationships, and the development of new materials.
Download or read book Metalorganic Catalysts for Synthesis and Polymerization written by Walter Kaminsky and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: 45 years after the discovery of transition metals and organometallics as cocatalysts for the polymerization of olefins and for organic synthesis, these compounds have not lost their fascination. The birthday of Karl Ziegler, the great pioneer in this metalorganic catalysis, is now 100 years ago. Polyolefins and polydienes produced by Ziegler-Natta catalysis are the most important plastics and elastomers. New impulses for the polymerization of olefins have been brought about by highly active metallocenes and other single site catalysts. Just by changing the ligands of the organometallic compounds, the structure of the polymers produced can be tailored in a wide manner. In invited lectures and posters, relevant aspects of the metalorganic catalysts for synthesis and polymerization are discussed in this book. This includes mechanism and kinetics, stereochemistry, material properties, and industrial applications.
Download or read book Processing and Characterization of Multicomponent Polymer Systems written by Jose James and published by CRC Press. This book was released on 2019-03-21 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent years have witnessed the sheer growth of macromolecular concepts and nanotechnology-based innovations in polymer science. Processing and Characterization of Multicomponent Polymer Systems is a collection of contributions from materials science experts across the globe. The fabrication and characterization of polymeric systems are still important in the study of materials science, and the quality measurements of newly designed polymeric stuffs demand systematic and new characterization protocols. The volume highlights some of the latest innovations and principles of nanostructured polymeric materials and polymer nanocomposites. It is devoted to novel architectures at the nano-level with an emphasis on new synthesis and characterization methods. Organized into several sections, the chapters cover a selection of topics on: Biocomposites and nanocomposites Interpenetrating polymeric networks and nanostructured materials Theoretical protocols for polymers and clusters Special topics in polymer processing and polymer coating. This survey will be an important resource for those involved in the field of polymer materials design for advanced technologies, including scientists, engineers, and budding researchers working in the area of polymer science and nanotechnology.
Download or read book Applications of EPR and NMR Spectroscopy in Homogeneous Catalysis written by Evgenii Talsi and published by CRC Press. This book was released on 2017-04-07 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews advances in important and practically relevant homogeneous catalytic transformations, such as single-site olefin polymerizations and chemo- and stereo-selective oxidations. Close attention is paid to the experimental investigation of the active sites of catalytic oxidation systems and their mechanisms. Major subjects include the applications of NMR and EPR spectroscopic techniques and data obtained by other physical methods. The book addresses a broad readership and focus on widespread techniques available in labs with NMR and EPR spectrometers.
Download or read book Introduction to Polymer Chemistry Fourth Edition written by Charles E. Carraher Jr. and published by CRC Press. This book was released on 2017-01-06 with total page 950 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Polymer Chemistry provides undergraduate students with a much-needed, well-rounded presentation of the principles and applications of natural, synthetic, inorganic, and organic polymers. With an emphasis on the environment and green chemistry and materials, this fourth edition continues to provide detailed coverage of natural and synthetic giant molecules, inorganic and organic polymers, elastomers, adhesives, coatings, fibers, plastics, blends, caulks, composites, and ceramics. Building on undergraduate work in foundational courses, the text fulfills the American Chemical Society Committee on Professional Training (ACS CPT) in-depth course requirement
Download or read book Biorefineries written by Michele Aresta and published by Walter de Gruyter GmbH & Co KG. This book was released on 2015-08-31 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biorefineries compiles the basic science and technologies used to convert terrestrial and aquatic biomass into essential molecular compounds and polymeric materials. The book provides in depth insights into this fairly recent concept of industrial chemistry that aims to achieve optimal economic profits while minimizing the environmental impact. Chapters written by renowned experts cover, amongst others, the application of catalysis, downstream processing, biomass sourced olefins, lignin biorefinery techniques and biogas. The authors thoroughly examine and explain the value chain for biomass conversion into platform molecules and their transformation into final products. A comprehensive thematic overview on the topic giving beginners access to fundamental concepts is presented. Supplemented by numerous full color figures and tables, the contents impart knowledge about the involved techniques. Advanced students and experts in the field will find the summary of state-of-the-art research and current literature of valuable interest. Explores the enormous potential of biomass conversion as a future source for fuels and chemicals Focuses on both general scientific background and current innovations in the field of biorefinery Targets students and researchers in Chemistry, Chemical Engineering, Biotechnology, and Materials Science About the Editors Prof. Michele Aresta, Chair of the Scientific Committee of CIRCC in Italy and holds the IMM Chair at the Department of Chemical and Biomolecular Engineering at NUS, Singapore. He is author of over 200 papers and Author or Editor of nine books. Prof. Angela Dibenedetto, Associate Professor at the Department of Chemistry of the University of Bari (Italy) focused on carbon dioxide utilization by applying biorefinery concepts; and Director of the Interuniversity Consortium on Chemical Reactivity and Catalysis-CIRCC. Prof. Franck Dumeignil, Deputy Director of the CNRS joint Unit of Catalysis and Chemistry of Solid (UCCS) of Lille University (France); project coordinator of several projects on chemistry, including the EuroBioRef Project for designing next generation biorefineries.
Download or read book Polymer Crystallization written by Jyotishkumar Parameswaranpillai and published by John Wiley & Sons. This book was released on 2023-07-03 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control the development of polymer crystals with this groundbreaking introduction Polymer crystallization is a crucial component of polymer development that impacts processing, applications, presentation, and more. Intervention in the polymer crystallization process, in the form of nanofilters, compatibilizers, and more, has the potential to improve optical and chemical properties, improve degrees of crystallinity, and increase hardness of polymer composites. The myriad applications of crystalline polymers make this one of the most exciting and fast-growing fields in polymer research. Polymer Crystallization provides a comprehensive introduction to this field and its most important recent developments. It characterizes and analysis an expansive range of crystalline polymers and discusses possible mechanisms for influencing their crystallization processes to impact a variety of outcomes and applications. These applications include industries from food packaging to automotive parts to medical and aerospace materials. Polymer Crystallization readers will also find: Detailed treatment of polymer morphology, rheology, modeling, and more Thorough introduction to the fundamentals of polymer crystallization Discussion of environmental safety issues and avenues for future research Polymer Crystallization is a useful reference for materials scientists, polymer scientists, biomedical scientists, and advanced undergraduate and graduate students in these and related fields.
Download or read book Catalytic Olefin Polymerization written by T. Keii and published by Elsevier. This book was released on 1990-09-12 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent development of a new generation of Ziegler-Natta Catalysts using either magnesium dichloride as carrier or methylaluminoxane as cocatalyst has markedly stimulated the research activity in the field of olefin polymerization. These discoveries have not only yielded economical processes for polyolefin production but also opened the way to a new generation of novel polymers. Moreover, the nature of active species is being clarified well by the effort to simplify catalyst systems. The present volume includes 38 papers from the 31 lectures and 18 posters presented at the symposium on `Recent Developments in Olefin Polymerization Catalysts', which covered the following topics: Overview of super-active homogeneous and heterogeneous catalysts, kinetic profile of olefin polymerization including copolymerization, characterization of catalysts and polymers, methods for the determination of active center concentration, role of Lewis bases on the catalysts isospecificity, polymerization mechanisms, and synthetic pathways for functionalized polyolefins. The contents are well balanced between fundamental research and application as well as between homogeneous and heterogeneous catalyst systems.
Download or read book Sustainable Polymer Composites and Nanocomposites written by Inamuddin and published by Springer. This book was released on 2019-02-01 with total page 1424 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents emerging economical and environmentally friendly polymer composites that are free of the side effects observed in traditional composites. It focuses on eco-friendly composite materials using granulated cork, a by-product of the cork industry; cellulose pulp from the recycling of paper residues; hemp fibers; and a range of other environmentally friendly materials procured from various sources. The book presents the manufacturing methods, properties and characterization techniques of these eco-friendly composites. The respective chapters address classical and recent aspects of eco-friendly polymer composites and their chemistry, along with practical applications in the biomedical, pharmaceutical, automotive and other sectors. Topics addressed include the fundamentals, processing, properties, practicality, drawbacks and advantages of eco-friendly polymer composites. Featuring contributions by experts in the field with a variety of backgrounds and specialties, the book will appeal to researchers and students in the fields of materials science and environmental science. Moreover, it fills the gap between research work in the laboratory and practical applications in related industries.
Download or read book Applied Homogeneous Catalysis with Organometallic Compounds written by Boy Cornils and published by John Wiley & Sons. This book was released on 2017-09-05 with total page 1770 pages. Available in PDF, EPUB and Kindle. Book excerpt: The completely revised third edition of this four-volume classic is fully updated and now includes such topics as as CH-activation and multicomponent reactions. It describes the most important reaction types, new methods and recent developments in catalysis. The internationally renowned editors and a plethora of international authors (including Nobel laureate R. Noyori) guarantee high quality content throughout the book. A "must read" for everyone in academia and industry working in this field.
Download or read book Ziegler Catalysts written by Gerhard Fink and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: Forty years after Ziegler's discovery of the "Aufbaureaktion" and low-pressure ethene polymerization, transition metal catalyzed olefin and diolefin polymerization continues to represent one of the most active and exciting areas. Since the 1980s, outstanding scientific innovations and process improvements have revolutionized polyolefin technology and greatly simplified polymerization processes. Well-defined catalyst systems are now at hand and facilitate the understanding of basic reaction mechanisms and correlations between catalyst structures, polymer microstructures, and polymer properties. This book reviews some of the modern approaches in organometallic chemistry, Ziegler-Natta catalysis, polymerization processes, design of novel materials, and the modelling in catalyst and process development.
