Download or read book Pocket Guide Foundry 2015 written by Simone Franke and published by Fachverlag Schiele & Schoen. This book was released on 2015-06-01 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ongoing technical training, familiarisation with new developments and studying current research results are key components of everyday working practices. The Pocket Guide Foundry is intended to provide appropriate information and offer inspiration in addition to supporting the development of technical contacts. It is not merely a helpful complement to vocational training, studies or continuing education, but also serves as a straightforward reference for practitioners and suppliers in the foundry industry, for design engineers, production engineers and readers with technical interests. Especially for young people who come into contact with the themes of foundries and castings from a wide variety of vocations and many different directions, the Pocket Guide Foundry serves as a starting point for a deeper technical understanding.
Download or read book Pocket Guide Foundry 2019 written by Dipl.-Ing. Simone Franke and published by Fachverlag Schiele & Schoen. This book was released on 2019-06-01 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ongoing technical training, familiarisation with new developments and studying current research results are key components of everyday working practices. The Pocket Guide Foundry is intended to provide appropriate information and offer inspiration in addition to supporting the development of technical contacts. It is not merely a helpful complement to vocational training, studies or continuing education, but also serves as a straightforward reference for practitioners and suppliers in the foundry industry, for design engineers, production engineers and readers with technical interests.
Download or read book The Moulder s and Founder s Pocket Guide written by Frederick Overman and published by . This book was released on 1880 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bewegung in Video und Film written by Josef-Anton Steber and published by Fachverlag Schiele & Schoen. This book was released on 2008-05-01 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: Die Autoren haben es sich zur Aufgabe gemacht, anhand theoretischer und praktischer Tests die Vorzüge und Nachteile von verschiedenen Display- und Projektionstechniken zu analysieren und zu bewerten. Die Ergebnisse dieser Untersuchung und Möglichkeiten zur bewussten Beeinflussung der Bewegtbilddarstellung tragen sie ausführlich und detailliert in diesem Werk zusammen.
Download or read book Foundry Practice written by Reginald Heber Palmer and published by . This book was released on 1919 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book West s Moulders Text book written by Thomas Dyson West and published by . This book was released on 1885 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Foundry Practice written by Reginald Heber Palmer and published by . This book was released on 1929 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book West s Moulders Text book written by Thomas Dyson West and published by . This book was released on 1891 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Charcoal Foundry written by David J. Gingery and published by David J. Gingery Publishing, LLC. This book was released on 2014-07-09 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt: Charcoal Foundry, the first book in the "Metal Working Shop From Scrap Series", gives you plans for building a metal melting furnace and instructions on basic pattern making and molding. All the information needed to set up a foundry in your work shop can be found in this book. Simply stated, if you can build a sand castle or make a mud pie, you can make a sand mold to produce castings for your metal shop projects. The main ingredient in these projects is scrap aluminum and pot metal. The only tools you need to get started are ordinary home shop hand tools, many of which are probably already in your possession. Much of the remainder is found as salvage or cast-off and little expense need be involved. The charcoal foundry is simple to build and operate and the initial cost is so low that it can be in the reach of nearly anyone. And the fundamentals of pattern-making and molding are easily understood and mastered. Once you have built the charcoal foundry and the metal lathe in book 2, there is little beyond your reach by way of shop equipment. Build as large or small as you wish and you are your own parts supply company. If you already have some machine shop equipment, you will find that adding a foundry to your shop greatly expands your capacity. Being able to produce your own castings for accessories and equipment is a great advantage. Design your own, make a copy or follow a plan. It's easy when you're in control and can produce your own castings.
Download or read book Foundry Nomenclature written by and published by . This book was released on 1903 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metalcasting written by C. W. Ammen and published by McGraw Hill Professional. This book was released on 2000 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: A-to-Z guide to low-volume metalcasting There's plenty of demand for one-shot or low production metalcasting job work, but the work often goes begging for lack of anyone to do it. Interested? Metalcasting by C.W. Ammen is packed with step-by-step guidelines for getting started and working effectively and efficiently in this time-honored craft. You get hands-on advice and cost-cutting tips, plus sound ideas for safety and productivity. In easy-to-understand language, this guide shows you how to use metalcrafting's tools and processes, casting and mold making...molding sands...molding equipment....metal melting, handling, and pouring devices...alloys...and more, including: *Patination of cast metals *Working with chemically-bonded molds *Newest molding, casting, and pattern-making techniques A Frequently Asked Questions section anticipates and responds to typical beginner's queries about applications and repair techniques and other metalcasting issues.
Download or read book The Metal Lathe written by David J. Gingery and published by David J. Gingery Publishing, LLC. This book was released on 2014-07-11 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using castings from your charcoal foundry (see Book 1 in the series: The Charcoal Foundry by David Gingery) and simple hand methods (no machine tools needed!) you can build a sturdy and accurate bed for a metal lathe. Then additional castings, common hardware items and improvised equipment will add the headstock, tailstock, carriage and all the remaining parts to complete the lathe. Illustrated with photos and drawings to show you all you need to know about patterns, molding, casting and finishing the parts. The lathe specs. include a 7" swing over the bed and 12" between centers. Adjustable tailstock with set-over for taper turning. Adjustable gibs in sliding members and adjustable sleeve bearings in the headstock. A truly practical machine capable of precision work. Once you have a foundry to cast the parts and a lathe to machine them you can tackle more exotic projects.
Download or read book Foundry Practice written by R. H. Palmer and published by Forgotten Books. This book was released on 2018-02-23 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Foundry Practice: A Text Book for Molders, Students, and Apprentices Such other matters as the student of foundry work should be acquainted with are included in the book, these including the subjects of cupola practice, mixing and melting, cleaning and repair of castings, etc. Subsequent editions of the book, of which the present volume is the fourth, have recorded the advances in the art and science of making castings, and the changes in methods and equipment resulting therefrom. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book The Moulder s and Founder s Pocket Guide written by Frederick Overman and published by . This book was released on 1881 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Text book of Elementary Foundry Practice written by William Allyn Richards and published by . This book was released on 1910 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Casting written by Steve Hurst and published by Appropriate Technology in the. This book was released on 1996 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallurgy.
