Download or read book Applied Plastics Engineering Handbook written by Myer Kutz and published by William Andrew. This book was released on 2016-09-15 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Plastics Engineering Handbook: Processing, Materials, and Applications, Second Edition, covers both the polymer basics that are helpful to bring readers quickly up-to-speed if they are not familiar with a particular area of plastics processing and the recent developments that enable practitioners to discover which options best fit their requirements. New chapters added specifically cover polyamides, polyimides, and polyesters. Hot topics such as 3-D printing and smart plastics are also included, giving plastics engineers the information they need to take these embryonic technologies and deploy them in their own work. With the increasing demands for lightness and fuel economy in the automotive industry (not least due to CAFÉ standards), plastics will soon be used even further in vehicles. A new chapter has been added to cover the technology trends in this area, and the book has been substantially updated to reflect advancements in technology, regulations, and the commercialization of plastics in various areas. Recycling of plastics has been thoroughly revised to reflect ongoing developments in sustainability of plastics. Extrusion processing is constantly progressing, as have the elastomeric materials, fillers, and additives which are available. Throughout the book, the focus is on the engineering aspects of producing and using plastics. The properties of plastics are explained, along with techniques for testing, measuring, enhancing, and analyzing them. Practical introductions to both core topics and new developments make this work equally valuable for newly qualified plastics engineers seeking the practical rules-of-thumb they don't teach you in school and experienced practitioners evaluating new technologies or getting up-to-speed in a new field. - Presents an authoritative source of practical advice for engineers, providing guidance from experts that will lead to cost savings and process improvements - Ideal introduction for both new engineers and experienced practitioners entering a new field or evaluating a new technology - Updated to include the latest technology, including 3D Printing, smart polymers, and thorough coverage of biopolymers and biodegradable plastics

Download or read book Specialty Polymers written by Ram K. Gupta and published by CRC Press. This book was released on 2023-01-31 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive volume provides current, state-of-the-art information on specialty polymers that can be used for many advanced applications. The book covers the fundamentals of specialty polymers, synthetic approaches, and chemistries to modify their properties to meet the requirements for special applications, along with current challenges and prospects. Chapters are written by global experts, making this a suitable textbook for students and a one-stop resource for researchers and industry professionals. Key Features: - Presents synthesis, characterization, and applications of specialty polymers for advanced applications. - Provides fundamentals and requirements for polymers to be used in many advanced and emerging areas. - Details novel methods and advanced technologies used in polymer industries. - Covers the state-of-the-art progress on specialty polymers for a range of advanced applications.

Download or read book Brydson s Plastics Materials written by Marianne Gilbert and published by William Andrew. This book was released on 2016-09-27 with total page 894 pages. Available in PDF, EPUB and Kindle. Book excerpt: Brydson's Plastics Materials, Eighth Edition, provides a comprehensive overview of the commercially available plastics materials that bridge the gap between theory and practice. The book enables scientists to understand the commercial implications of their work and provides engineers with essential theory. Since the previous edition, many developments have taken place in plastics materials, such as the growth in the commercial use of sustainable bioplastics, so this book brings the user fully up-to-date with the latest materials, references, units, and figures that have all been thoroughly updated. The book remains the authoritiative resource for engineers, suppliers, researchers, materials scientists, and academics in the field of polymers, including current best practice, processing, and material selection information and health and safety guidance, along with discussions of sustainability and the commercial importance of various plastics and additives, including nanofillers and graphene as property modifiers. With a 50 year history as the principal reference in the field of plastics material, and fully updated by an expert team of polymer scientists and engineers, this book is essential reading for researchers and practitioners in this field. - Presents a one-stop-shop for easily accessible information on plastics materials, now updated to include the latest biopolymers, high temperature engineering plastics, thermoplastic elastomers, and more - Includes thoroughly revised and reorganised material as contributed by an expert team who make the book relevant to all plastics engineers, materials scientists, and students of polymers - Includes the latest guidance on health, safety, and sustainability, including materials safety data sheets, local regulations, and a discussion of recycling issues

Download or read book Automotive Recycling Plastics and Sustainability written by David Schönmayr and published by Springer. This book was released on 2017-05-31 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides transdisciplinary analyses of the automotive plastics production and recycling system, including prognoses, scenarios and solutions for corporate sustainability management. A book on plastics, not written by a plastics guy. But a sustainability guy. Plastics schizophrenia and the automotive abyss: The industry is facing a severe challenge. It is the inevitable and promising change towards a sustainable economy. However, the automotive industry is primarily concerned with the CO2 emissions from cars when driving, while the rise of lightweight plastics, electric drive and heavy batteries make the production and end-of-life phase ever more important. Therefore, the currently increasing use of non-sustainable virgin plastics in cars has to be tackled. The plastics and the automotive industry now have a chance, and this chance is the Recycling Renaissance. This book offers: • Holistic and transdisciplinary overview on sustainability and automotive plastics from all angles including economy, ecology, technology, and politics with a focus on Europe • Concise analyses, prognoses, tools and a roadmap with solutions for companies, developed together with international experts from industry and academia • Strong scientific basis and independent research including a Europe-wide survey, expert interviews, and workshops • More than 80 illustrations and 15 tables including a SCOT analysis • Executive summaries after each chapter for fast reading “The uniqueness of this book lies within the different point of view on this topic from a critical, outstanding scientist.” - Univ.-Prof. Dipl.-Ing. Dr.mont. Pomberger, Montanuni Leoben

Download or read book Technological Advancement in Mechanical and Automotive Engineering written by Muhammad Yusri Ismail and published by Springer Nature. This book was released on 2022-08-08 with total page 950 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book Technological Advancement in Mechanical & Automotive Engineering gathers selected papers submitted to the 6th International Conference on Mechanical Engineering Research in fields related to automotive engineering, thermal and fluid engineering, and energy. This proceeding consists of papers in aforementioned related fields presented by researchers and scientists from universities, research institutes and industry showcasing their latest findings and discussions with an emphasis on innovations and developments in embracing the new norm resulting from the COVID pandemic.

Download or read book Automotive Plastics and Composites written by Joseph P. Greene and published by William Andrew. This book was released on 2021-06-23 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Automotive Plastics and Composites: Materials and Processing is an essential guide to the use of plastic and polymer composites in automotive applications, whether in the exterior, interior, under-the-hood, or powertrain, with a focus on materials, properties, and processing. The book begins by introducing plastics and polymers for the automotive industry, discussing polymer materials and structures, mechanical, chemical, and physical properties, rheology, and flow analysis. In the second part of the book, each chapter is dedicated to a category of material, and considers the manufacture, processing, properties, shrinkage, and possible applications, in each case. Two chapters on polymer processing provide detailed information on both closed-mold and open-mold processing. The final chapters explain other key aspects, such as recycling and sustainability, design principles, tooling, and future trends. This book is an ideal reference for plastics engineers, product designers, technicians, scientists, and R&D professionals who are looking to develop materials, components, or products for automotive applications. The book also intends to guide researchers, scientists, and advanced students in plastics engineering, polymer processing, and materials science and engineering. - Analyzes mechanical, chemical, physical, and thermal properties, enabling the reader to select the appropriate material for specific applications - Explains polymer processing, with thorough coverage of operations across both closed-mold and open-mold processing - Provides systematic coverage of materials, including commodity and engineering thermoplastics, bio-based plastics, thermosets, composites, elastomeric polymers, and 3D-printed plastics

Download or read book Proceedings of SAE China Congress 2016 Selected Papers written by China Society of Automotive Engineers and published by Springer. This book was released on 2017-03-07 with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume gathers outstanding papers submitted to the 2016 SAE-China Congress, the majority of which are from China, the biggest car maker as well as most dynamic car market in the world. The book includes insights into the current challenges that the whole industry is currently facing, and it offers possible solutions to problems such as emission controls, environmental pollution, the energy shortage, traffic congestion and sustainable development. It also presents the latest technical achievements in the automotive industry. Many of the approaches it presents can help technicians to solve the practical problems that most affect their daily work.

Download or read book Plastics and Sustainability written by Michael Tolinski and published by John Wiley & Sons. This book was released on 2011-11-16 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clearly lays out the issues related to plastics' effects on the environment, while also serving as a practical, non-academic guide for making sustainability decisions about plastics recycling and the newest bio-based plastics Company managers, product developers, policy makers, environmental researchers, and plastics industry engineers are under increasing pressure to find ways of minimizing the environmental footprint of plastic products. This accessible book is designed to help readers understand the life-cycle impacts of various plastics, clarifying the technical research and practical arguments to show when bio-based and recycled plastics might be useful options for reducing the overall energy consumption, greenhouse gas emissions, and waste associated with traditional plastics. Plastics and Sustainability compares traditional fossil fuel-based plastics with bio-based plastics in terms of properties, environmental impacts, and costs -- indicating what the most effective approaches could be for using recycled, biodegradable, or various bio-based materials. The book makes objective comparisons between bioplastics and all commonly used plastics, focusing on how they affect production economics, product requirements, and retailer and consumer needs. It incorporates research concerning life-cycle assessment, production techniques, and commercial applications, and presents "green" guidelines about product design, recycling, processing efficiency, and material selection. The book also reports on recent industry developments and commercial trends in an effort to synthesize conclusions that are necessary for finding the right balance between bio-based and fossil-fuel based plastic products. Check out the author's blog at http://www.plastech.biz/blog.

Download or read book Proceedings of the 19th Asia Pacific Automotive Engineering Conference SAE China Congress 2017 Selected Papers written by Society of Automotive Engineers (SAE-China) and published by Springer. This book was released on 2018-10-06 with total page 1158 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Proceedings volume gathers outstanding papers submitted to the 19th Asia Pacific Automotive Engineering Conference & 2017 SAE-China Congress, the majority of which are from China – the largest car-maker as well as most dynamic car market in the world. The book covers a wide range of automotive topics, presenting the latest technical advances and approaches to help technicians solve the practical problems that most affect their daily work.

Download or read book History of Industrial Uses of Soybeans Nonfood Nonfeed 660 CE 2017 written by William Shurtleff; Akiko Aoyagi and published by Soyinfo Center. This book was released on 2017-12-03 with total page 2055 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world's most comprehensive, well documented and well illustrated book on this subject. With extensive subject and geographical index. 145 photographs and illustrations - mostly color. Free of charge in digital PDF format on Google Books.

Download or read book Advanced Composite Materials for Automotive Applications written by Ahmed Elmarakbi and published by John Wiley & Sons. This book was released on 2013-10-09 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: The automotive industry faces many challenges, including increased global competition, the need for higher-performance vehicles, a reduction in costs and tighter environmental and safety requirements. The materials used in automotive engineering play key roles in overcoming these issues: ultimately lighter materials mean lighter vehicles and lower emissions. Composites are being used increasingly in the automotive industry due to their strength, quality and light weight. Advanced Composite Materials for Automotive Applications: Structural Integrity and Crashworthiness provides a comprehensive explanation of how advanced composite materials, including FRPs, reinforced thermoplastics, carbon-based composites and many others, are designed, processed and utilized in vehicles. It includes technical explanations of composite materials in vehicle design and analysis and covers all phases of composite design, modelling, testing and failure analysis. It also sheds light on the performance of existing materials including carbon composites and future developments in automotive material technology which work towards reducing the weight of the vehicle structure. Key features: Chapters written by world-renowned authors and experts in their own fields Includes detailed case studies and examples covering all aspects of composite materials and their application in the automotive industries Unique topic integration between the impact, crash, failure, damage, analysis and modelling of composites Presents the state of the art in composite materials and their application in the automotive industry Integrates theory and practice in the fields of composite materials and automotive engineering Considers energy efficiency and environmental implications Advanced Composite Materials for Automotive Applications: Structural Integrity and Crashworthiness is a comprehensive reference for those working with composite materials in both academia and industry, and is also a useful source of information for those considering using composites in automotive applications in the future.

Download or read book Plastics Application Technology for Lightweight Automobiles written by Sudhakar Marur and published by SAE International. This book was released on 2013-08-06 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is focused on the use of plastics in automobiles for traditional applications, as well as for more advanced uses such as under-the-hood components. Engineering thermoplastics offer the ability to tailor-make components from polymers, and to design parts for enhanced performance, new functionality, part integration, and elimination of secondary operations. Parts made from engineering thermoplastics can be manufactured within specified cost constraints, and using manufacturing methods that offer a wide range of production flexibility. A decade of research and real-world applications is presented by the authors on application technology development for various aspects of automotive design – concept design, CAD modeling, predictive engineering methods through CAE, manufacturing method simulation, and prototype and tool making. Additional advantages of plastics are covered and include greater styling, improved energy absorption, and enhanced performance over traditional materials, all while fostering environmental sustainability and reducing overall vehicle weight for next generation automobiles.

Download or read book Vehicle and Automotive Engineering 4 written by Károly Jármai and published by Springer Nature. This book was released on 2022-09-09 with total page 1046 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the selected proceedings of the (third) fourth Vehicle and Automotive Engineering conference, reflecting the outcomes of theoretical and practical studies and outlining future development trends in a broad field of automotive research. The conference’s main themes included design, manufacturing, economic and educational topics.

Download or read book Applied Plastics Engineering Handbook written by Myer Kutz and published by Elsevier. This book was released on 2023-11-24 with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Plastics Engineering Handbook: Processing, Sustainability, Materials, and Applications, Third Edition presents the fundamentals of plastics engineering, helping bring readers up-to-speed on new plastics, materials, processing and technology. This revised and expanded edition includes the latest developments in plastics, including areas such as biodegradable and biobased plastics, plastic waste, smart polymers, and 3D printing. Sections cover traditional plastics, elastomeric materials, bio-based materials, additives, colorants, fillers and plastics processing, including various key technologies, plastic recycling and waste. The final part of the book examines design and applications, with substantial updates made to reflect advancements in technology, regulations, and commercialization. Throughout the handbook, the focus is on engineering aspects of producing and using plastics. Properties of plastics are explained, along with techniques for testing, measuring, enhancing, and analyzing them. Practical introductions to both core topics and new developments make this work equally valuable for newly qualified plastics engineers seeking the practical rules-of-thumb they don't teach you in school and experienced practitioners evaluating new technologies or getting up-to-speed in a new field. - Offers an ideal reference for new engineers, experienced practitioners and researchers entering a new field or evaluating a new technology - Provides an authoritative source of practical advice, presenting guidance that will lead to cost savings and process improvements - Includes the latest technology, covering 3D printing, smart polymers and thorough coverage of biobased and biodegradable plastics

Download or read book Vehicle and Automotive Engineering written by Károly Jármai and published by Springer. This book was released on 2017-03-23 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the first vehicle engineering and vehicle industry conference. It captures the outcome of theoretical and practical studies as well as the future development trends in a wide field of automotive research. The themes of the conference include design, manufacturing, economic and educational topics.

Download or read book Plastics Technology Handbook Fourth Edition written by Manas Chanda and published by CRC Press. This book was released on 2006-12-19 with total page 890 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because the field of plastics is one of the fastest changing areas today, the need arises to offer relevant, comprehensive material on polymers. An established source of information on modern plastics, the Plastics Technology Handbook continues to provide up-to-date coverage on the properties, processing methods, and applications of polymers. Retaining the easy-to-follow structure of the previous editions, this fourth edition includes new topics of interest that reflect recent developments and lead to better insights into the molecular behavior of polymers. New to the Fourth Edition Advances in supramolecular polymerization, flame retardancy, polymer-based nanomedicines, and drug delivery The new concept of oxo-biodegradable polymers Broadened discussion on plastic foams and foam extrusion processes More information on the processing and applications of industrial polymers, including the emerging field of nanoblends Developments in polymer synthesis and applications, such as polymeric sensors, hydrogels and smart polymers, hyperbranched polymers, shape memory polymers, polymeric optical fibers, scavenger resins, polymer nanocomposites, polymerization-filled composites, and wood-polymer composites A state-of-the-art account of the various available methods for plastics recycling Advances in the use of polymers in packaging, construction, the automotive and aerospace industries, agriculture, electronics and electrical technology, biomedical applications, corrosion prevention, and sports and marine applications Plastics Technology Handbook, Fourth Edition thoroughly covers traditional industrial polymers and their processing methods as well as contemporary polymeric materials, recent trends, and the latest applications.

Download or read book Proceedings of the 14th International Scientific Conference Computer Aided Engineering written by Eugeniusz Rusiński and published by Springer. This book was released on 2019-03-09 with total page 886 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 14th International Conference on Computer Aided Engineering, collecting the best papers from the event, which was held in Wrocław, Poland in June 2018. It includes contributions from researchers in computer engineering addressing the applied science and development of the industry and offering up-to-date information on the development of the key technologies in technology transfer. It is divided into the following thematic sections: • parametric and concurrent design, • advanced numerical simulations of physical systems, • integration of CAD/CAE systems for machine design, • presentation of professional CAD and CAE systems, • presentation of the modern methods of machine testing, • presentation of practical CAD/CAM/CAE applications: – designing and manufacturing of machines and technical systems, – durability prediction, repairs and retrofitting of power equipment, – strength and thermodynamic analyses of power equipment, – design and calculation of various types of load-carrying structures, – numerical methods of dimensioning materials handling and long-distance transport equipment (cranes, gantries, automotive, rail, air, space and other special vehicles and earth-moving machinery), • CAE integration problems. The conference and its proceedings offer a major interdisciplinary forum for researchers and engineers in innovative studies and advances in this dynamic field.