Download or read book Plastic Deformation and Strain Hardening written by P.O. Kettunen and published by Trans Tech Publications Ltd. This book was released on 2003-03-01 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication is based upon lectures given during a well-received course on physical metallurgy and originally intended for students specializing in fields related to metallic materials. But, as the author points out, metallic materials are the most widely investigated group of materials and their study therefore gives a good basis for understanding how other materials can be made to reveal interrelationships between their structures and properties; especially with regard to those properties associated with strain. Similar types of rule can then be applied to other materials, in spite of their apparent differences.
Download or read book Plastic Deformation and Strain Hardening written by and published by . This book was released on 2003 with total page 1 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metals are the most thoroughly studied group among the many diverse substances that are the subject matter of Materials Science. They therefore make good paradigms, and furnish invaluable benchmarks, for guiding scientists in deciding how other materials should best be studied in order to reveal most clearly the interrelationships between structure and properties. This holds especially true for the mechanical strength properties which are associated with straining. Once one understands the basic phenomena and relationships pertaining to metals, similar types of rule can then often be transferred to other materials; in spite of the fact that the magnitudes and relative extents of elastic, an elastic and plastic straining may be very different. In recent decades, striking examples and generally encouraging results, of the application of these ideas have been reported for ceramics, polymers and even for such complex natural composites as wood.
Download or read book Testing of the Plastic Deformation of Metals written by T. W. Clyne and published by Cambridge University Press. This book was released on 2021-06-10 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover a novel approach to the subject, providing detailed information about established and innovative mechanical testing procedures.
Download or read book The Inhomogeneity of Plastic Deformation written by and published by . This book was released on 1973 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Properties and Testing of Polymers written by G.M. Swallowe and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume represents a continuation of the Polymer Science and Technology series edited by Dr. D. M. Brewis and Professor D. Briggs. The theme of the series is the production of a number of stand alone volumes on various areas of polymer science and technology. Each volume contains short articles by a variety of expert contributors outlining a particular topic and these articles are extensively cross referenced. References to related topics included in the volume are indicated by bold text in the articles, the bold text being the title of the relevant article. At the end of each article there is a list of bibliographic references where interested readers can obtain further detailed information on the subject of the article. This volume was produced at the invitation of Derek Brewis who asked me to edit a text which concentrated on the mechanical properties of polymers. There are already many excellent books on the mechanical properties of polymers, and a somewhat lesser number of volumes dealing with methods of carrying out mechanical tests on polymers. Some of these books are listed in Appendix 1. In this volume I have attempted to cover basic mechanical properties and test methods as well as the theory of polymer mechanical deformation and hope that the reader will find the approach useful.
Download or read book Elastic plastic Torsion Problem for Strain hardening Materials written by Alexander Mendelson and published by . This book was released on 1968 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plastic Deformation and Fracture of Materials written by Robert W. Cahn and published by Wiley-VCH. This book was released on 1993 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Science and Technology A Comprehensive Treatment Edited by R.W. Cahn, P. Haasen, E.J. Kramer The 18-volume series ‘Materials Science and Technology' is the first in-depth, topic-oriented reference work devoted to this growing interdisciplinary field. A compendium of current, state-of-the-art information, it covers the most important classes of materials: metals, ceramics, glasses, polymers, semiconductors, and composites, from the fundamentals of perfect semiconductors via the physics of defects to "artificial" and amorphous semiconductors. Edited by internationally renowned figures in materials science, this series is sure to establish itself as a seminal work. Volume 6: This volume focuses on the mechanisms of plastic deformation and fatigue affecting the properties and performance of a wide variety of materials. Topics included are: flow stress and work hardening • dislocation patterning • solid solution strengthening • particle strengthening • superplasticity • inelastic deformation • cyclic deformation • fracture mechanisms • friction and wear • high-temperature deformation and creep • deformation and textures of metals at large strains
Download or read book Dislocations and Plastic Deformation written by I. Kovács and published by Elsevier. This book was released on 2016-07-08 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dislocations and Plastic Deformation deals with dislocations and plastic deformation, and specifically discusses topics ranging from deformation of single crystals and dislocations in the lattice to the fundamentals of the continuum theory, the properties of point defects in crystals, multiplication of dislocations, and partial dislocations. The effect of lattice defects on the physical properties of metals is also considered. Comprised of nine chapters, this book begins by providing a short and, where possible, precise explanation of dislocation theory. The first six chapters discuss the properties of dislocations and point defects both in crystals and in an elastic continuum. The reader is then introduced to some applications of dislocation theory that show, for instance, the difficulties involved in understanding the hardening of alloys and the work-hardening of pure metals. This book concludes by analyzing the effect of heat treatment on the defect structure in metals. This text will be of interest to students and practitioners in the field of physics.
Download or read book The Physics of Deformation and Fracture of Polymers written by A. S. Argon and published by Cambridge University Press. This book was released on 2013-03-07 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: A physical, mechanism-based presentation of the plasticity and fracture of polymers, covering industrial scale applications through to nanoscale biofluidic devices.
Download or read book Dislocation Dynamics During Plastic Deformation written by Ulrich Messerschmidt and published by Springer Science & Business Media. This book was released on 2010-04-19 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: Along with numerous illustrative examples, this text provides an overview of the dynamic behavior of dislocations and its relation to plastic deformation. It introduces the general properties of dislocations and treats the dislocation dynamics in some detail.
Download or read book The Virtual Fields Method written by Fabrice Pierron and published by Springer Science & Business Media. This book was released on 2012-03-21 with total page 531 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Virtual Fields Method: Extracting Constitutive Mechanical Parameters from Full-field Deformation Measurements is the first and only one on the Virtual Fields Method, a recent technique to identify materials mechanical properties from full-field measurements. It contains an extensive theoretical description of the method as well as numerous examples of application to a wide range of materials (composites, metals, welds, biomaterials etc.) and situations(static, vibration, high strain rate etc.). Finally, it contains a detailed training section with examples of progressive difficulty to lead the reader to program the VFM. This is accompanied with a set of commented Matlab programs as well as with a GUI Matlab based software for more general situations.
Download or read book Postgraduate Orthopaedics written by Paul A. Banaszkiewicz and published by Cambridge University Press. This book was released on 2012-08-16 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: The must-have book for candidates preparing for the oral component of the FRCS (Tr and Orth).
Download or read book Plasticity Theory written by Jacob Lubliner and published by Courier Corporation. This book was released on 2013-04-22 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of Plasticity Theory is to provide a comprehensive introduction to the contemporary state of knowledge in basic plasticity theory and to its applications. It treats several areas not commonly found between the covers of a single book: the physics of plasticity, constitutive theory, dynamic plasticity, large-deformation plasticity, and numerical methods, in addition to a representative survey of problems treated by classical methods, such as elastic-plastic problems, plane plastic flow, and limit analysis; the problem discussed come from areas of interest to mechanical, structural, and geotechnical engineers, metallurgists and others. The necessary mathematics and basic mechanics and thermodynamics are covered in an introductory chapter, making the book a self-contained text suitable for advanced undergraduates and graduate students, as well as a reference for practitioners of solid mechanics.
Download or read book Mechanical Behavior of Materials written by William F. Hosford and published by Cambridge University Press. This book was released on 2010 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a textbook on the mechanical behavior of materials for mechanical and materials engineering. It emphasizes quantitative problem solving. This new edition includes treatment of the effects of texture on properties and microstructure in Chapter 7, a new chapter (12) on discontinuous and inhomogeneous deformation, and treatment of foams in Chapter 21.
Download or read book Corrosion of Aluminium written by Christian Vargel and published by Elsevier. This book was released on 2004-10-02 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion of Aluminium highlights the practical and general aspects of the corrosion of aluminium alloys with many illustrations and references. In addition to that, the first chapter allows the reader who is not very familiar with aluminium to understand the metallurgical, chemical and physical features of the aluminium alloys. The author Christian Vargel, has adopted a practitioner approach, based on the expertise and experience gained from a 40 year career in aluminium corrosion This approach is most suitable for assessing the corrosion resistance of aluminium- an assessment which is one of the main conditions for the development of many uses of aluminium in transport, construction, power transmission etc. 600 bibliographic references provide a comprehensive guide to over 100 years of related study Providing practical applications to the reader across many industries Accessible to both the beginner and the expert
Download or read book Plasticity for Engineers written by C. R. Calladine and published by Elsevier. This book was released on 2000-09-01 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the plastic property of materials, and the way in which structures made of such material behave under load. It is intended for civil, mechanical, electro-mechanical, marine, and aeronautical engineers for under-graduate or post-graduate courses or research, and professionals in industry. Professor Calladine, from long experience in teaching, research and industry, here delivers a readable and authoritative account of theory and applications. He presents the classical "perfect plasticity material" as a model of irreversible mechanical behaviour, using this perfect plasticity property to analyse a range of continuum structural problems and metal-forming processes relevant to engineering practice.
Download or read book Polymer Glasses written by Connie B. Roth and published by CRC Press. This book was released on 2016-12-12 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: "the present book will be of great value for both newcomers to the field and mature active researchers by serving as a coherent and timely introduction to some of the modern approaches, ideas, results, emerging understanding, and many open questions in this fascinating field of polymer glasses, supercooled liquids, and thin films" –Kenneth S. Schweizer, Morris Professor of Materials Science & Engineering, University of Illinois at Urbana-Champaign (from the Foreword) This book provides a timely and comprehensive overview of molecular level insights into polymer glasses in confined geometries and under deformation. Polymer glasses have become ubiquitous to our daily life, from the polycarbonate eyeglass lenses on the end of our nose to large acrylic glass panes holding water in aquarium tanks, with advantages over glass in that they are lightweight and easy to manufacture, while remaining transparent and rigid. The contents include an introduction to the field, as well as state of the art investigations. Chapters delve into studies of commonalities across different types of glass formers (polymers, small molecules, colloids, and granular materials), which have enabled microscopic and molecular level frameworks to be developed. The authors show how glass formers are modeled across different systems, thereby leading to treatments for polymer glasses with first-principle based approaches and molecular level detail. Readers across disciplines will benefit from this topical overview summarizing the key areas of polymer glasses, alongside an introduction to the main principles and approaches.
