Download or read book Dependable Embedded Systems written by Jörg Henkel and published by Springer Nature. This book was released on 2020-12-09 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Open Access book introduces readers to many new techniques for enhancing and optimizing reliability in embedded systems, which have emerged particularly within the last five years. This book introduces the most prominent reliability concerns from today’s points of view and roughly recapitulates the progress in the community so far. Unlike other books that focus on a single abstraction level such circuit level or system level alone, the focus of this book is to deal with the different reliability challenges across different levels starting from the physical level all the way to the system level (cross-layer approaches). The book aims at demonstrating how new hardware/software co-design solution can be proposed to ef-fectively mitigate reliability degradation such as transistor aging, processor variation, temperature effects, soft errors, etc. Provides readers with latest insights into novel, cross-layer methods and models with respect to dependability of embedded systems; Describes cross-layer approaches that can leverage reliability through techniques that are pro-actively designed with respect to techniques at other layers; Explains run-time adaptation and concepts/means of self-organization, in order to achieve error resiliency in complex, future many core systems.
Download or read book Embedded Systems Handbook written by Richard Zurawski and published by CRC Press. This book was released on 2018-09-03 with total page 667 pages. Available in PDF, EPUB and Kindle. Book excerpt: Considered a standard industry resource, the Embedded Systems Handbook provided researchers and technicians with the authoritative information needed to launch a wealth of diverse applications, including those in automotive electronics, industrial automated systems, and building automation and control. Now a new resource is required to report on current developments and provide a technical reference for those looking to move the field forward yet again. Divided into two volumes to accommodate this growth, the Embedded Systems Handbook, Second Edition presents a comprehensive view on this area of computer engineering with a currently appropriate emphasis on developments in networking and applications. Those experts directly involved in the creation and evolution of the ideas and technologies presented offer tutorials, research surveys, and technology overviews that explore cutting-edge developments and deployments and identify potential trends. This first self-contained volume of the handbook, Embedded Systems Design and Verification, is divided into three sections. It begins with a brief introduction to embedded systems design and verification. It then provides a comprehensive overview of embedded processors and various aspects of system-on-chip and FPGA, as well as solutions to design challenges. The final section explores power-aware embedded computing, design issues specific to secure embedded systems, and web services for embedded devices. Those interested in taking their work with embedded systems to the network level should complete their study with the second volume: Network Embedded Systems.
Download or read book Embedded Systems Handbook 2 Volume Set written by Richard Zurawski and published by CRC Press. This book was released on 2018-10-08 with total page 1503 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past few years there has been an dramatic upsurge in research and development, implementations of new technologies, and deployments of actual solutions and technologies in the diverse application areas of embedded systems. These areas include automotive electronics, industrial automated systems, and building automation and control. Comprising 48 chapters and the contributions of 74 leading experts from industry and academia, the Embedded Systems Handbook, Second Edition presents a comprehensive view of embedded systems: their design, verification, networking, and applications. The contributors, directly involved in the creation and evolution of the ideas and technologies presented, offer tutorials, research surveys, and technology overviews, exploring new developments, deployments, and trends. To accommodate the tremendous growth in the field, the handbook is now divided into two volumes. New in This Edition: Processors for embedded systems Processor-centric architecture description languages Networked embedded systems in the automotive and industrial automation fields Wireless embedded systems Embedded Systems Design and Verification Volume I of the handbook is divided into three sections. It begins with a brief introduction to embedded systems design and verification. The book then provides a comprehensive overview of embedded processors and various aspects of system-on-chip and FPGA, as well as solutions to design challenges. The final section explores power-aware embedded computing, design issues specific to secure embedded systems, and web services for embedded devices. Networked Embedded Systems Volume II focuses on selected application areas of networked embedded systems. It covers automotive field, industrial automation, building automation, and wireless sensor networks. This volume highlights implementations in fast-evolving areas which have not received proper coverage in other publications. Reflecting the unique functional requirements of different application areas, the contributors discuss inter-node communication aspects in the context of specific applications of networked embedded systems.
Download or read book Approximate Computing and its Impact on Accuracy Reliability and Fault Tolerance written by Gennaro S. Rodrigues and published by Springer Nature. This book was released on 2022-11-16 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the concept of approximate computing for software and hardware designs and its impact on the reliability of embedded systems. It presents approximate computing methods and proposes approximate fault tolerance techniques applied to programmable hardware and embedded software to provide reliability at low computational costs. The book also presents fault tolerance techniques based on approximate computing, thus presenting how approximate computing can be applied to safety-critical systems.
Download or read book ICMLG 2017 5th International Conference on Management Leadership and Governance written by Dr Thabang Mokoteli and published by Academic Conferences and publishing limited. This book was released on 2017-03 with total page 567 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sensemaking in Safety Critical and Complex Situations written by Stig Ole Johnsen and published by CRC Press. This book was released on 2021-07-13 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sensemaking in Safety Critical and Complex Situations: Human Factors and Design Human factors-based design that supports the strengths and weaknesses of humans are often missed during the concept and design of complex technical systems. With the focus on digitalization and automation, the human actor is often left out of the loop but needs to step in during safety-critical situations. This book describes how human factors and sensemaking can be used as part of the concept and design of safety critical systems in order to improve safety and resilience. This book discusses the challenges of automation and automated systems when humans are left out of the loop and then need to intervene when the situation calls for it. It covers human control and accepts that humans must handle the unexpected and describes methods to support this. It is based on recent accident analysis involving autonomous systems that move our understanding forward and supports a more modern view on human errors to improve safety in industries such as shipping and marine. The book is for human factors and ergonomists, safety engineers, designers involved in safety critical work and students. Stig Ole Johnsen is a Senior Researcher at SINTEF in Norway. He has a PhD from NTNU in Norway with a focus on resilience in complex socio-technical systems and has a Master’s in Technology Management from MIT/NTNU. He chairs the Human Factors in Control network (HFC) in Norway to strengthen the human factors focus during development and implementation of safety critical technology. His research interests include meaningful human control to support safety and resilience during automation and digitalization. Thomas Porathe has a degree in Information Design from Malardalen University in Sweden. He is currently Professor of Interaction Design at the Norwegian University of Science and Technology in Trondheim, Norway. He specializes in maritime human factors and design of maritime information systems, specifically directed towards control room design, e-navigation and autonomous ships. He has been working with e-Navigation since 2006 in EU projects such as BLAST, EfficienSea, MONALISA, ACCSEAS, SESAME and the unmanned ship project MUNIN. He is active in the International Association of Aids to Navigation and Lighthouse Authorities (IALA).
Download or read book Formal Methods Applied to Industrial Complex Systems written by Jean-Louis Boulanger and published by John Wiley & Sons. This book was released on 2014-07-09 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: A presentation of real examples of industrial uses for formal methods such as SCADE, the B-Method, ControlBuild, Matelo, etc. in various fields, such as railways, aeronautics, and the automotive industry, the purpose of this book is to present a summary of experience on the use of these “formal methods” (such as proof and model-checking) in industrial examples of complex systems. It is based on the experience of people who are currently involved in the creation and evaluation of safety critical system software. The involvement of people from within the industry allows us to avoid the usual problems of confidentiality which could arise and thus enables us to supply new useful information (photos, architecture plans, real examples, etc.).
Download or read book Introduction to Embedded Systems Second Edition written by Edward Ashford Lee and published by MIT Press. This book was released on 2017-01-06 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the engineering principles of embedded systems, with a focus on modeling, design, and analysis of cyber-physical systems. The most visible use of computers and software is processing information for human consumption. The vast majority of computers in use, however, are much less visible. They run the engine, brakes, seatbelts, airbag, and audio system in your car. They digitally encode your voice and construct a radio signal to send it from your cell phone to a base station. They command robots on a factory floor, power generation in a power plant, processes in a chemical plant, and traffic lights in a city. These less visible computers are called embedded systems, and the software they run is called embedded software. The principal challenges in designing and analyzing embedded systems stem from their interaction with physical processes. This book takes a cyber-physical approach to embedded systems, introducing the engineering concepts underlying embedded systems as a technology and as a subject of study. The focus is on modeling, design, and analysis of cyber-physical systems, which integrate computation, networking, and physical processes. The second edition offers two new chapters, several new exercises, and other improvements. The book can be used as a textbook at the advanced undergraduate or introductory graduate level and as a professional reference for practicing engineers and computer scientists. Readers should have some familiarity with machine structures, computer programming, basic discrete mathematics and algorithms, and signals and systems.
Download or read book ICCWS 2017 12th International Conference on Cyber Warfare and Security written by Dr. Robert F. Mills and published by Academic Conferences and publishing limited. This book was released on 2017 with total page 567 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Debugging Embedded and Real Time Systems written by Arnold S. Berger and published by Newnes. This book was released on 2020-07-17 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Debugging Embedded and Real-Time Systems: The Art, Science, Technology and Tools of Real-Time System Debugging gives a unique introduction to debugging skills and strategies for embedded and real-time systems. Practically focused, it draws on application notes and white papers written by the companies who create design and debug tools. Debugging Embedded and Real Time Systems presents best practice strategies for debugging real-time systems, through real-life case studies and coverage of specialized tools such as logic analysis, JTAG debuggers and performance analyzers. It follows the traditional design life cycle of an embedded system and points out where defects can be introduced and how to find them and prevent them in future designs. It also studies application performance monitoring, the execution trace recording of individual applications, and other tactics to debug and control individual running applications in the multitasking OS. Suitable for the professional engineer and student, this book is a compendium of best practices based on the literature as well as the author’s considerable experience as a tools’ developer. Provides a unique reference on Debugging Embedded and Real-Time Systems Presents best practice strategies for debugging real-time systems Written by an author with many years of experience as a tools developer Includes real-life case studies that show how debugging skills can be improved Covers logic analysis, JTAG debuggers and performance analyzers that are used for designing and debugging embedded systems
Download or read book Critical Essays in Music Education written by MarveleneC. Moore and published by Routledge. This book was released on 2017-07-05 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of essays references traditional and contemporary thought on theory and practice in music education for all age groups, from the very young to the elderly. The material spans a broad range of subject areas from history and philosophy to art and music, and addresses issues such as curriculum, pedagogy, assessment and evaluation, as well as current issues in technology and performance standards. Written by leading researchers and educators from diverse countries and cultures, this selection of previously published articles, research studies and book chapters is representative of the most frequently discussed and debated topics in the profession. This volume, which documents the importance of lifelong learning, is an indispensable reference work for specialists in the field of music education.
Download or read book Research Anthology on Reliability and Safety in Aviation Systems Spacecraft and Air Transport written by Management Association, Information Resources and published by IGI Global. This book was released on 2020-09-24 with total page 1601 pages. Available in PDF, EPUB and Kindle. Book excerpt: As with other transportation methods, safety issues in aircraft can result in a total loss of life. Recently, the air transport industry has come under immense scrutiny after several deaths occurred due to aircraft design and airlines that allowed improperly inspected aircraft to fly. Spacecraft too have found errors in system software that could lead to catastrophic failure. It is imperative that the aviation and aerospace industries continue to revise and refine safety protocols from the construction and design of aircraft, to secure and improve aviation systems, and to test and inspect aircraft. The Research Anthology on Reliability and Safety in Aviation Systems, Spacecraft, and Air Transport is a vital reference source that examines the latest scholarly material on the use of adaptive and assistive technologies in aviation to establish clear guidelines for the design and implementation of such technologies to better serve the needs of both military and civilian pilots. It also covers new information technology use in aviation systems to streamline the cybersecurity, decision making, planning, and design processes within the aviation industry. Highlighting a range of topics such as air navigation systems, computer simulation, and airline operations, this multi-volume book is ideally designed for pilots, scientists, engineers, aviation operators, air traffic controllers, air crash investigators, teachers, academicians, researchers, and students.
Download or read book Local Computer Networks 19th Conference On written by and published by . This book was released on 1994-10 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Health Monitoring of Composite Structures Using Fiber Optic Methods written by Ginu Rajan and published by CRC Press. This book was released on 2016-10-03 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: This highly comprehensive, introductory book explains the basics of structural health monitoring aspects of composite structures. This book serve as an all-in-one reference book in which the reader can receive a basic understanding of composite materials, manufacturing methods, the latest types of optical fiber sensors used for structural health monitoring of composite structures, and demonstrated applications of the use of fiber sensors in a variety of composite material structures. The content draws upon the authors’ and distinguished contributors’ extensive research/teaching and industrial experience to fully cover the structural health monitoring of composite materials using fiber optic sensing methods.
Download or read book ARI Newsletter written by U.S. Army Research Institute for the Behavioral and Social Sciences and published by . This book was released on with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Embedded Systems written by Kiyofumi Tanaka and published by BoD – Books on Demand. This book was released on 2012-03-02 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nowadays, embedded systems - the computer systems that are embedded in various kinds of devices and play an important role of specific control functions, have permitted various aspects of industry. Therefore, we can hardly discuss our life and society from now onwards without referring to embedded systems. For wide-ranging embedded systems to continue their growth, a number of high-quality fundamental and applied researches are indispensable. This book contains 19 excellent chapters and addresses a wide spectrum of research topics on embedded systems, including basic researches, theoretical studies, and practical work. Embedded systems can be made only after fusing miscellaneous technologies together. Various technologies condensed in this book will be helpful to researchers and engineers around the world.
