Download or read book Research in Progress written by and published by . This book was released on 1992 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Adaptive Systems in Control and Signal Processing 1989 written by T.S. Durrani and published by Elsevier. This book was released on 2014-06-28 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Symposium covered three major areas: adaptive control, identification and signal processing. In all three, new developments were discussed covering both theoretical and applications research. Within the subject area of adaptive control the discussion centred around the challenges of robust control design to unmodelled dynamics, robust parameter estimation and enhanced performance from the estimator, while the papers on identification took the theme of it being a bridge between adaptive control and signal processing. The final area looked at two aspects of signal processing: recursive estimation and adaptive filters.

Download or read book Instrument Engineers Handbook Volume Two written by Bela G. Liptak and published by CRC Press. This book was released on 2018-10-08 with total page 2460 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest update to Bela Liptak's acclaimed "bible" of instrument engineering is now available. Retaining the format that made the previous editions bestsellers in their own right, the fourth edition of Process Control and Optimization continues the tradition of providing quick and easy access to highly practical information. The authors are practicing engineers, not theoretical people from academia, and their from-the-trenches advice has been repeatedly tested in real-life applications. Expanded coverage includes descriptions of overseas manufacturer's products and concepts, model-based optimization in control theory, new major inventions and innovations in control valves, and a full chapter devoted to safety. With more than 2000 graphs, figures, and tables, this all-inclusive encyclopedic volume replaces an entire library with one authoritative reference. The fourth edition brings the content of the previous editions completely up to date, incorporates the developments of the last decade, and broadens the horizons of the work from an American to a global perspective. Béla G. Lipták speaks on Post-Oil Energy Technology on the AT&T Tech Channel.

Download or read book Algorithms and Architectures for Real Time Control 1992 written by P.J. Fleming and published by Elsevier. This book was released on 2014-05-23 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Workshop focuses on such issues as control algorithms which are suitable for real-time use, computer architectures which are suitable for real-time control algorithms, and applications for real-time control issues in the areas of parallel algorithms, multiprocessor systems, neural networks, fault-tolerance systems, real-time robot control identification, real-time filtering algorithms, control algorithms, fuzzy control, adaptive and self-tuning control, and real-time control applications.

Download or read book Adaptive Control written by Shankar Sastry and published by Courier Corporation. This book was released on 2011-01-01 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume surveys the major results and techniques of analysis in the field of adaptive control. Focusing on linear, continuous time, single-input, single-output systems, the authors offer a clear, conceptual presentation of adaptive methods, enabling a critical evaluation of these techniques and suggesting avenues of further development. 1989 edition.

Download or read book Adaptive Systems in Control and Signal Processing 1992 written by L. Dugard and published by Elsevier. This book was released on 2014-06-28 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adaptive Systems remain a very interesting field of theoretical research, extended by methodological studies and an increasing number of applications. The plenary papers, invited sessions and contributed sessions focused on many aspects of adaptive systems, such as systems identification and modelling, adaptive control of nonlinear systems and theoretical issues in adaptive control. Also covered were methodological aspects and applications of adaptive control, intelligent tuning and adaptive signal processing.

Download or read book Technology for Large Space Systems written by and published by . This book was released on 1990 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Robust Adaptive Control written by Petros Ioannou and published by Courier Corporation. This book was released on 2013-09-26 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presented in a tutorial style, this comprehensive treatment unifies, simplifies, and explains most of the techniques for designing and analyzing adaptive control systems. Numerous examples clarify procedures and methods. 1995 edition.

Download or read book Adaptive Systems in Control and Signal Processing 1986 written by K.J. Aström and published by Elsevier. This book was released on 2016-07-21 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second IFAC workshop discusses the variety and applications of adaptive systems in control and signal processing. The various approaches to adaptive control systems are covered and their stability and adaptability analyzed. The volume also includes papers taken from two poster sessions to give a concise and comprehensive overview/treatment of this increasingly important field.

Download or read book Fault Diagnosis and Sustainable Control of Wind Turbines written by Silvio Simani and published by Butterworth-Heinemann. This book was released on 2018-01-02 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault Diagnosis and Sustainable Control of Wind Turbines: Robust Data-Driven and Model-Based Strategies discusses the development of reliable and robust fault diagnosis and fault-tolerant ('sustainable') control schemes by means of data-driven and model-based approaches. These strategies are able to cope with unknown nonlinear systems and noisy measurements. The book also discusses simpler solutions relying on data-driven and model-based methodologies, which are key when on-line implementations are considered for the proposed schemes. The book targets both professional engineers working in industry and researchers in academic and scientific institutions. In order to improve the safety, reliability and efficiency of wind turbine systems, thus avoiding expensive unplanned maintenance, the accommodation of faults in their early occurrence is fundamental. To highlight the potential of the proposed methods in real applications, hardware–in–the–loop test facilities (representing realistic wind turbine systems) are considered to analyze the digital implementation of the designed solutions. The achieved results show that the developed schemes are able to maintain the desired performances, thus validating their reliability and viability in real-time implementations. Different groups of readers—ranging from industrial engineers wishing to gain insight into the applications' potential of new fault diagnosis and sustainable control methods, to the academic control community looking for new problems to tackle—will find much to learn from this work. - Provides wind turbine models with varying complexity, as well as the solutions proposed and developed by the authors - Addresses in detail the design, development and realistic implementation of fault diagnosis and fault tolerant control strategies for wind turbine systems - Addresses the development of sustainable control solutions that, in general, do not require the introduction of further or redundant measurements - Proposes active fault tolerant ('sustainable') solutions that are able to maintain the wind turbine working conditions with gracefully degraded performance before required maintenance can occur - Presents full coverage of the diagnosis and fault tolerant control problem, starting from the modeling and identification and finishing with diagnosis and fault tolerant control approaches - Provides MATLAB and Simulink codes for the solutions proposed

Download or read book European Control Conference 1991 written by and published by European Control Association. This book was released on 1991-07-02 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the European Control Conference 1991, July 2-5, 1991, Grenoble, France

Download or read book Government Reports Announcements Index written by and published by . This book was released on 1995 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Information Processing in Automatic Control AIPAC 89 written by R. Husson and published by Elsevier. This book was released on 2014-05-23 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: Information Processing is a key area of research and development and the symposium presented state-of-the-art reports on some of the areas which are of relevance in automatic control: fault diagnosis and system reliability. Papers also covered the role of expert systems and other knowledge based systems, which are needed, to cope with the vast quantities of data generated by large scale systems. This volume should be considered essential reading for anyone involved in this rapidly developing area.

Download or read book Low Cost Automation written by A. De Carli and published by Pergamon. This book was released on 1991 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Symposium sought to cover a number of methods used to achieve low cost automation in industry today. The first half of the volume deals with the techniques developed to provide a low cost alternative; these include computer-aided design, electrical devices, P I D controllers, modelling, petri nets and systems. A further section covers components and instruments which affect such things as reliability aspects and new instrumentation. The papers in the second half of the volume cover the applications of the aforementioned techniques and are applied in general purpose control strategies, manufacturing and factory automation, and computer networks.

Download or read book System Identification and Adaptive Control written by Yiannis Boutalis and published by Springer Science & Business. This book was released on 2014-04-23 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting current trends in the development and applications of intelligent systems in engineering, this monograph focuses on recent research results in system identification and control. The recurrent neurofuzzy and the fuzzy cognitive network (FCN) models are presented. Both models are suitable for partially-known or unknown complex time-varying systems. Neurofuzzy Adaptive Control contains rigorous proofs of its statements which result in concrete conclusions for the selection of the design parameters of the algorithms presented. The neurofuzzy model combines concepts from fuzzy systems and recurrent high-order neural networks to produce powerful system approximations that are used for adaptive control. The FCN model stems from fuzzy cognitive maps and uses the notion of “concepts” and their causal relationships to capture the behavior of complex systems. The book shows how, with the benefit of proper training algorithms, these models are potent system emulators suitable for use in engineering systems. All chapters are supported by illustrative simulation experiments, while separate chapters are devoted to the potential industrial applications of each model including projects in: • contemporary power generation; • process control and • conventional benchmarking problems. Researchers and graduate students working in adaptive estimation and intelligent control will find Neurofuzzy Adaptive Control of interest both for the currency of its models and because it demonstrates their relevance for real systems. The monograph also shows industrial engineers how to test intelligent adaptive control easily using proven theoretical results.

Download or read book Non Cooperative Target Tracking Fusion and Control written by Zhongliang Jing and published by Springer. This book was released on 2018-06-25 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a concise and comprehensive overview of non-cooperative target tracking, fusion and control. Focusing on algorithms rather than theories for non-cooperative targets including air and space-borne targets, this work explores a number of advanced techniques, including Gaussian mixture cardinalized probability hypothesis density (CPHD) filter, optimization on manifold, construction of filter banks and tight frames, structured sparse representation, and others. Containing a variety of illustrative and computational examples, Non-cooperative Target Tracking, Fusion and Control will be useful for students as well as engineers with an interest in information fusion, aerospace applications, radar data processing and remote sensing.