Download or read book Delay Fault Testing for VLSI Circuits written by Angela Krstic and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the early days of digital design, we were concerned with the logical correctness of circuits. We knew that if we slowed down the clock signal sufficiently, the circuit would function correctly. With improvements in the semiconductor process technology, our expectations on speed have soared. A frequently asked question in the last decade has been how fast can the clock run. This puts significant demands on timing analysis and delay testing. Fueled by the above events, a tremendous growth has occurred in the research on delay testing. Recent work includes fault models, algorithms for test generation and fault simulation, and methods for design and synthesis for testability. The authors of this book, Angela Krstic and Tim Cheng, have personally contributed to this research. Now they do an even greater service to the profession by collecting the work of a large number of researchers. In addition to expounding such a great deal of information, they have delivered it with utmost clarity. To further the reader's understanding many key concepts are illustrated by simple examples. The basic ideas of delay testing have reached a level of maturity that makes them suitable for practice. In that sense, this book is the best x DELAY FAULT TESTING FOR VLSI CIRCUITS available guide for an engineer designing or testing VLSI systems. Tech niques for path delay testing and for use of slower test equipment to test high-speed circuits are of particular interest.
Download or read book Path Delay Faults in VLSI Circuits written by Mustapha M. Hamad and published by . This book was released on 1995 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Test Generation of Crosstalk Delay Faults in VLSI Circuits written by S. Jayanthy and published by Springer. This book was released on 2018-09-20 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a variety of test generation algorithms for testing crosstalk delay faults in VLSI circuits. It introduces readers to the various crosstalk effects and describes both deterministic and simulation-based methods for testing crosstalk delay faults. The book begins with a focus on currently available crosstalk delay models, test generation algorithms for delay faults and crosstalk delay faults, before moving on to deterministic algorithms and simulation-based algorithms used to test crosstalk delay faults. Given its depth of coverage, the book will be of interest to design engineers and researchers in the field of VLSI Testing.
Download or read book Path Delay Fault Testing for Digital VLSI Circuits Using Specialized Binary Decision Diagrams written by Kyriakos A. Christou and published by . This book was released on 2012 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Essentials of Electronic Testing for Digital Memory and Mixed Signal VLSI Circuits written by M. Bushnell and published by Springer Science & Business Media. This book was released on 2006-04-11 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: The modern electronic testing has a forty year history. Test professionals hold some fairly large conferences and numerous workshops, have a journal, and there are over one hundred books on testing. Still, a full course on testing is offered only at a few universities, mostly by professors who have a research interest in this area. Apparently, most professors would not have taken a course on electronic testing when they were students. Other than the computer engineering curriculum being too crowded, the major reason cited for the absence of a course on electronic testing is the lack of a suitable textbook. For VLSI the foundation was provided by semiconductor device techn- ogy, circuit design, and electronic testing. In a computer engineering curriculum, therefore, it is necessary that foundations should be taught before applications. The field of VLSI has expanded to systems-on-a-chip, which include digital, memory, and mixed-signalsubsystems. To our knowledge this is the first textbook to cover all three types of electronic circuits. We have written this textbook for an undergraduate “foundations” course on electronic testing. Obviously, it is too voluminous for a one-semester course and a teacher will have to select from the topics. We did not restrict such freedom because the selection may depend upon the individual expertise and interests. Besides, there is merit in having a larger book that will retain its usefulness for the owner even after the completion of the course. With equal tenacity, we address the needs of three other groups of readers.
Download or read book Scalable Test Generation for Path Delay Faults written by Edward Flanigan and published by . This book was released on 2009 with total page 75 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern day IC design has drawn a lot of attention towards the path delay fault model (PDF), which targets delay defects that affect the timing characteristics of a circuit. Due to the exponential number of paths in modern circuits a subset of critical paths are chosen for testing purposes. Path intensive circuits contain a large number of critical paths whose delays affect the performance of the circuit. This dissertation presents three techniques to improve test generation for path delay faults. The first technique presented in this dissertation avoids testing unnecessary paths by using arithmetic operations. The second technique shows how to compact many faults into a single test application, thus saving valuable test application time. The third technique demonstrates how to generate tests under modern day scan architectures. Experimental results demonstrate the effectiveness of the proposed techniques.
Download or read book Defect Oriented Testing for Nano Metric CMOS VLSI Circuits written by Manoj Sachdev and published by Springer Science & Business Media. This book was released on 2007-06-04 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2nd edition of defect oriented testing has been extensively updated. New chapters on Functional, Parametric Defect Models and Inductive fault Analysis and Yield Engineering have been added to provide a link between defect sources and yield. The chapter on RAM testing has been updated with focus on parametric and SRAM stability testing. Similarly, newer material has been incorporated in digital fault modeling and analog testing chapters. The strength of Defect Oriented Testing for nano-Metric CMOS VLSIs lies in its industrial relevance.
Download or read book Test Vector Generation for Parametric Path Delay Faults written by Mukund Sivaraman and published by . This book was released on 1995 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: "Previous research in the field of path delay fault test generation has concentrated on finding tests which test the paths regardless of component delay values. Coverage of such tests on benchmark circuits has been shown to be poor, so we present a mechanism wherein path delay fault tests are found under the assumption of component delay variations resulting from fabrication process fluctuations. Component delay fault models are built which incorporate fabrication process effects represented in terms of basic device parameter variations. We use a stable time based sensitization approach to get conditions on primary inputs and path delays for which a delay fault is produced at the circuit outputs. A minimal test set is then extracted from these conditions. Results for the ISCAS'89 and Logic synthesis'91 benchmark circuits indicate the feasibility of this approach."
Download or read book Testing for Path Delay Faults Synchronous Digital Circuits written by Soumitra Bose and published by . This book was released on 1996 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fault Modeling Delay Evaluation and Path Selection for Delay Test Under Process Variation in Nano scale VLSI Circuits written by and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Delay test in nano-scale VLSI circuits becomes more difficult with shrinking technology feature sizes and rising clock frequencies. In this dissertation, we study three challenging issues in delay test: fault modeling, variational delay evaluation and path selection under process variation. Previous research of fault modeling on resistive spot defects, such as resistive opens and bridges in the interconnect, and resistive shorts in devices, lacked an accurate fault model. As a result it was difficult to perform fault simulation and select the best vectors. Conventional methods to compute variational delay under process variation are either slow or inaccurate. On the problem of path selection under process variation, previous approaches either choose too many paths, or missed the path that is necessary to be tested. We present new solutions in this dissertation. A new fault model that clearly and comprehensively expresses the relationship between electrical behaviors and resistive spots is proposed. Then the effect of process variations on path delays is modeled with a linear function and a fast method to compute coefficients of the linear function is also derived. Finally, we present the new path pruning algorithms that efficiently prune unimportant paths for test, and as a result we select as few as possible paths for test while the fault coverage is satisfied. The experimental results show that the new solutions are efficient and accurate.
Download or read book Thermal Aware Testing of Digital VLSI Circuits and Systems written by Santanu Chattopadhyay and published by CRC Press. This book was released on 2018-04-24 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to highlight the research activities in the domain of thermal-aware testing. Thermal-aware testing can be employed both at circuit level and at system level Describes range of algorithms for addressing thermal-aware test issue, presents comparison of temperature reduction with power-aware techniques and include results on benchmark circuits and systems for different techniques This book will be suitable for researchers working on power- and thermal-aware design and the testing of digital VLSI chips
Download or read book A Unified Approach for Timing Verification and Delay Fault Testing written by Mukund Sivaraman and published by Springer Science & Business Media. This book was released on 2012-09-17 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: Large system complexities and operation under tight timing constraints in rapidly shrinking technologies have made it extremely important to ensure correct temporal behavior of modern-day digital circuits, both before and after fabrication. Research in (pre-fabrication) timing verification and (post-fabrication) delay fault testing has evolved along largely disjoint lines in spite of the fact that they share many basic concepts. A Unified Approach for Timing Verification and Delay Fault Testing applies concepts developed in the context of delay fault testing to path sensitization, which allows an accurate timing analysis mechanism to be developed. This path sensitization strategy is further applied for efficient delay fault diagnosis and delay fault coverage estimation. A new path sensitization strategy called Signal Stabilization Time Analysis (SSTA) has been developed based on the fact that primitive PDFs determine the stabilization time of the circuit outputs. This analysis has been used to develop a feasible method of identifying the primitive PDFs in a general multi-level logic circuit. An approach to determine the maximum circuit delay using this primitive PDF identification mechanism is also presented. The Primitive PDF Identification-based Timing Analysis (PITA) approach is proved to determine the maximum floating mode circuit delay exactly under any component delay model, and provides several advantages over previously floating mode timing analyzers. A framework for the diagnosis of circuit failures caused by distributed path delay faults is also presented. A metric to quantify the diagnosability of a path delay fault for a test is also proposed. Finally, the book presents a very realistic metric for delay fault coverage which accounts for delay fault size distributions and is applicable to any delay fault model. A Unified Approach for Timing Verification and Delay Fault Testing will be of interest to university and industry researchers in timing analysis and delay fault testing as well as EDA tool development engineers and design verification engineers dealing with timing issues in ULSI circuits. The book should also be of interest to digital designers and others interested in knowing the state of the art in timing verification and delay fault testing.
Download or read book The VLSI Handbook written by Wai-Kai Chen and published by CRC Press. This book was released on 2018-10-03 with total page 2320 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the new millenium, Wai-Kai Chen introduced a monumental reference for the design, analysis, and prediction of VLSI circuits: The VLSI Handbook. Still a valuable tool for dealing with the most dynamic field in engineering, this second edition includes 13 sections comprising nearly 100 chapters focused on the key concepts, models, and equations. Written by a stellar international panel of expert contributors, this handbook is a reliable, comprehensive resource for real answers to practical problems. It emphasizes fundamental theory underlying professional applications and also reflects key areas of industrial and research focus. WHAT'S IN THE SECOND EDITION? Sections on... Low-power electronics and design VLSI signal processing Chapters on... CMOS fabrication Content-addressable memory Compound semiconductor RF circuits High-speed circuit design principles SiGe HBT technology Bipolar junction transistor amplifiers Performance modeling and analysis using SystemC Design languages, expanded from two chapters to twelve Testing of digital systems Structured for convenient navigation and loaded with practical solutions, The VLSI Handbook, Second Edition remains the first choice for answers to the problems and challenges faced daily in engineering practice.
Download or read book Models in Hardware Testing written by Hans-Joachim Wunderlich and published by Springer Science & Business Media. This book was released on 2009-11-12 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model based testing is the most powerful technique for testing hardware and software systems. Models in Hardware Testing describes the use of models at all the levels of hardware testing. The relevant fault models for nanoscaled CMOS technology are introduced, and their implications on fault simulation, automatic test pattern generation, fault diagnosis, memory testing and power aware testing are discussed. Models and the corresponding algorithms are considered with respect to the most recent state of the art, and they are put into a historical context by a concluding chapter on the use of physical fault models in fault tolerance.
Download or read book On Line Testing for VLSI written by Michael Nicolaidis and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: Test functions (fault detection, diagnosis, error correction, repair, etc.) that are applied concurrently while the system continues its intended function are defined as on-line testing. In its expanded scope, on-line testing includes the design of concurrent error checking subsystems that can be themselves self-checking, fail-safe systems that continue to function correctly even after an error occurs, reliability monitoring, and self-test and fault-tolerant designs. On-Line Testing for VLSI contains a selected set of articles that discuss many of the modern aspects of on-line testing as faced today. The contributions are largely derived from recent IEEE International On-Line Testing Workshops. Guest editors Michael Nicolaidis, Yervant Zorian and Dhiraj Pradhan organized the articles into six chapters. In the first chapter the editors introduce a large number of approaches with an expanded bibliography in which some references date back to the sixties. On-Line Testing for VLSI is an edited volume of original research comprising invited contributions by leading researchers.
Download or read book VLSI Design Theory and Practice written by and published by Laxmi Publications. This book was released on 2013 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Test and Diagnosis for Small Delay Defects written by Mohammad Tehranipoor and published by Springer Science & Business Media. This book was released on 2011-09-08 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will introduce new techniques for detecting and diagnosing small-delay defects in integrated circuits. Although this sort of timing defect is commonly found in integrated circuits manufactured with nanometer technology, this will be the first book to introduce effective and scalable methodologies for screening and diagnosing small-delay defects, including important parameters such as process variations, crosstalk, and power supply noise.
