Download or read book Oxygen transport in thin oxide films at high field strength written by Dieter Weber and published by Forschungszentrum Jülich. This book was released on 2014 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ionic transport in nanostructures at high eld strength has recently gained attention, because novel types of computer memory with potentially superior properties rely on such phenomena. The applied voltages are only moderate, but they drop over the distance of a few nanometers and lead to extreme eld strengths in the MV/cm region. Such strong elds contributes signi cantly to the activation energy for ionic jump processes. This leads to an exponential increase of transport speed with voltage. Conventional high-temperature ionic conduction, in contrast, only relies on thermal activation for such jumps. In this thesis, the transport of minute amounts of oxygen through a thin dielectric layer sandwiched between two thin conducting oxide electrodes was detected semiquantitatively by measuring the conductance change of the electrodes after applying a current through the dielectric layer. The relative conductance change G=G as a function of current I and duration t follows over several orders of magnitude a simple, empirical law of the form G=G = CIAtB with t parameters C, A and B; A;B 2 [0; 1]. This empirical law can be linked to a predicted exponential increase of the transport speed with voltage at high eld strength. The behavior in the time domain can be explained with a spectrum of relaxation processes, similar to the relaxation of dielectrics. The in uence of temperature on the transport is strong, but still much lower than expected. This contradicts a commonly used law for high- eld ionic transport. The di erent oxide layers are epitaxial with thicknesses between 5 and 70 nm. First large-scale test samples were fabricated using shadow masks. The general behavior of such devices was studied extensively. In an attempt to achieve quantitative results with defect-free, miniaturized devices, a lithographic manufacturing process that uses repeated steps of epitaxial deposition and structuring of the layers was developed. It employs newly developed and optimized wet chemical etching processes for the conducting electrodes. First high-quality devices could be manufactured with this process and con rmed that such devices su er less from parasitic e ects. The lithographically structured samples were made from di erent materials. The results from the rst test samples and the lithographically structured samples are therefore not directly comparable. They do exhibit however in principle the same behavior. Further investigation of such lithographically structured samples appears promising
Download or read book Resistive switching in ZrO2 based metal oxide metal structures written by Irina Kärkkänen and published by Forschungszentrum Jülich. This book was released on 2014 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Oxide Ultrathin Films written by Gianfranco Pacchioni and published by John Wiley & Sons. This book was released on 2012-09-19 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: A wealth of information in one accessible book. Written by international experts from multidisciplinary fields, this in-depth exploration of oxide ultrathin films covers all aspects of these systems, starting with preparation and characterization, and going on to geometrical and electronic structure, as well as applications in current and future systems and devices. From the Contents: Synthesis and Preparation of Oxide Ultrathin Films Characterization Tools of Oxide Ultrathin Films Ordered Oxide Nanostructures on Metal Surfaces Unusual Properties of Oxides and Other Insulators in the Ultrathin Limit Silica and High-K Dielectrics Thin Films in Microelectronics Oxide Passive Films and Corrosion Protection Oxide Films as Catalytic Materials and as Models of Real Catalysts Oxide Films in Spintronics Oxide Ultrathin Films in Solid Oxide Fuel Cells Transparent Conducting and Chromogenic Oxide Films as Solar Energy Materials Oxide Ultrathin Films in Sensor Applications Ferroelectricity in Ultrathin Film Capacitors Titania Thin Films in Biocompatible Materials and Medical Implants Oxide Nanowires for New Chemical Sensor Devices
Download or read book Electronic Dissipation Processes During Chemical Reactions on Surfaces written by Kevin Stella and published by disserta Verlag. This book was released on 2011 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: Every day in our life is larded with a huge number of chemical reactions on surfaces. Some reactions occur immediately, for others an activation energy has to be supplied. Thus it happens that though a reaction should thermodynamically run off, it is kinetically hindered. Meaning the partners react only to the thermodynamically more stable product state within a mentionable time if the activation energy of the reaction is supplied. With the help of catalysts the activation energy of a reaction can be lowered. Such catalytic processes on surfaces are widely used in industry. Around 90% of chemicals are produced via a heterogeneously catalyzed process where a reaction occurs on the surface of a catalyst. However, why is it generally possible that such reactions run off with the help of heterogeneous catalysis, meaning with lower activation energy than without presence of a catalyst? What happens with the energy which is released during a reaction of gas particles on surfaces? How is this energy released, when some part of the energy is transferred to the reactant and some to the chemically active surface? Which physical mechanisms play a key role in the energy transfer? These questions are summarized in the concept of the energy dissipation. To observe this energy dissipation phenomenon, we use a new method, the chemoelectronics. With this method we try to detect the released energy, induced by reactions on surfaces, via thin-layered electronic device elements. An aim of this work is to build up very sensitive chemoelectronic sensors to measure electronic excitations released during such simple reactions of molecules as adsorption and desorption and more complicated reactions as the water formation reaction. Therefore a new line of chemoelectronic sensors is developed and characterized in terms of internal photoemission and stability. Meaning the previously used aluminum (Al-AlOx-Ag) and tantalum based (Ta-TaOx-Au) metal-insulator-metal sensors (MIM) are tested and new titanium based (Ti-TiOx-Au) MIMs are developed. Additionally silicon based stepped-metal-insulator-semiconductor sensors (stepped-MIS, Si-SiOx-Au, Si-SiOx-Pt) are set up and characterized. For the characterization of the chemoelectronic sensors the process of internal photoemission is used. Both, chemical- and photoexcitation release hot charge carriers (electrons and holes). Due to the existence of excited carriers in the sensor, a current can be measured without applying a bias voltage. It will be shown that the chemo- and the photosensitivity are strongly related to each other. As a first experiment for the chemical selectivity of the detectors, a stream of excited hydrogen molecules and hydrogen atoms is used. The excitation and radical formation is produced by the interaction of ground state molecules with a hot tungsten surface according to the pioneering experiments of Irving Langmuir. Additionally, excited oxygen beams are studied in this work.
Download or read book Corrosion Mechanisms in Theory and Practice Third Edition written by Philippe Marcus and published by CRC Press. This book was released on 2011-08-18 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated to include recent results from intensive worldwide research efforts in materials science, surface science, and corrosion science, Corrosion Mechanisms in Theory and Practice, Third Edition explores the latest advances in corrosion and protection mechanisms. It presents a detailed account of the chemical and electrochemical surface reactions that govern corrosion as well as the link between microscopic forces and macroscopic behavior. Revised and expanded, this edition includes four new chapters on corrosion fundamentals, the passivity of metals, high temperature corrosion, and the corrosion of aluminum alloys. The first half of the book covers basic aspects of corrosion, such as entry of hydrogen into metals, anodic dissolution, localized corrosion, stress corrosion cracking, and corrosion fatigue. Connecting the theoretical aspects of corrosion mechanisms to practical applications in industry, the second half of the text discusses corrosion inhibition, atmospheric corrosion, microbially induced corrosion, corrosion in nuclear systems, corrosion of microelectronic and magnetic data-storage devices, and organic coatings. With contributions from leading academic and industrial researchers, this bestselling book continues to provide a thorough understanding of corrosion mechanisms—helping you solve existing corrosion challenges and prevent future problems.
Download or read book Introduction to High Temperature Oxidation and Corrosion written by A. S. Khanna and published by ASM International. This book was released on 2002-01-01 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text for graduate and post graduate students covers fundamentals of high temperature corrosion and related topics. Early chapters cover the thermodynamics and kinetics of oxidation and defect structure of oxides and diffusion in oxides, and later chapters cover thin and thick layer oxidation, o
Download or read book Oxygen Transport in Vapor deposited Tin doped Indium Oxide Films written by Jack Harrison Enloe and published by . This book was released on 1984 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Comprehensive Biomaterials II written by Kevin Healy and published by Elsevier. This book was released on 2017-05-18 with total page 4865 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Biomaterials II, Second Edition, Seven Volume Set brings together the myriad facets of biomaterials into one expertly-written series of edited volumes. Articles address the current status of nearly all biomaterials in the field, their strengths and weaknesses, their future prospects, appropriate analytical methods and testing, device applications and performance, emerging candidate materials as competitors and disruptive technologies, research and development, regulatory management, commercial aspects, and applications, including medical applications. Detailed coverage is given to both new and emerging areas and the latest research in more traditional areas of the field. Particular attention is given to those areas in which major recent developments have taken place. This new edition, with 75% new or updated articles, will provide biomedical scientists in industry, government, academia, and research organizations with an accurate perspective on the field in a manner that is both accessible and thorough. Reviews the current status of nearly all biomaterials in the field by analyzing their strengths and weaknesses, performance, and future prospects Covers all significant emerging technologies in areas such as 3D printing of tissues, organs and scaffolds, cell encapsulation; multimodal delivery, cancer/vaccine - biomaterial applications, neural interface understanding, materials used for in situ imaging, and infection prevention and treatment Effectively describes the many modern aspects of biomaterials from basic science, to clinical applications
Download or read book Handbook of Environmental Degradation of Materials written by Myer Kutz and published by William Andrew. This book was released on 2012-09-24 with total page 934 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nothing stays the same for ever. The environmental degradation and corrosion of materials is inevitable and affects most aspects of life. In industrial settings, this inescapable fact has very significant financial, safety and environmental implications. The Handbook of Environmental Degradation of Materials explains how to measure, analyse, and control environmental degradation for a wide range of industrial materials including metals, polymers, ceramics, concrete, wood and textiles exposed to environmental factors such as weather, seawater, and fire. Divided into sections which deal with analysis, types of degradation, protection and surface engineering respectively, the reader is introduced to the wide variety of environmental effects and what can be done to control them. The expert contributors to this book provide a wealth of insider knowledge and engineering knowhow, complementing their explanations and advice with Case Studies from areas such as pipelines, tankers, packaging and chemical processing equipment ensures that the reader understands the practical measures that can be put in place to save money, lives and the environment. The Handbook's broad scope introduces the reader to the effects of environmental degradation on a wide range of materials, including metals, plastics, concrete,wood and textiles For each type of material, the book describes the kind of degradation that effects it and how best to protect it Case Studies show how organizations from small consulting firms to corporate giants design and manufacture products that are more resistant to environmental effects
Download or read book Metals and Materials written by R. E. Smallman and published by Elsevier. This book was released on 2013-10-22 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metals and Materials: Science, Processes, Applications aims to present the science of materials in a readable and concise form that leads naturally to an explanation of the ways in which materials are processed and applied. The science of metals, or physical metallurgy, has developed naturally into the wider and more diverse discipline of materials science. The study of metals and alloys still forms a large and important part of this relatively new discipline, but it’s common to find that fundamental principles and concepts of physical metallurgy can be adapted to explain the behavior of a variety of non-metallic materials. As an aid to fully study this discipline, each chapter has been supplemented with a list of specialized references. These references include images and diagrams that illustrate the subtleties of materials, such as micrographs of grain structures and fine-scale defects, phase diagrams for metals and ceramics, electron diffraction patterns revealing atomic arrangements, specific property diagrams correlating the behavior of different materials, and slip vector diagrams for deforming crystals. Throughout this book, sufficient background and theory is provided to assist students in answering questions about a large part of a typical degree course in materials science and engineering. Some sections provide a background or point of entry for postgraduate studies and courses.
Download or read book Oxide Thin Films and Nanostructures written by Falko P. Netzer and published by Oxford University Press. This book was released on 2021 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oxide Thin Films and Nanostructures is an interdisciplinary approach to introduce readers to the field of oxide nano-materials, that is oxides of nano-meter size and dimensions. Emphasis is put to differentiate these nanoscale oxide objects from their solid bulk oxide parents and present their properties in a pedagogic way.
Download or read book Biomaterials Science written by William R Wagner and published by Academic Press. This book was released on 2020-05-23 with total page 1612 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revised edition of the renowned and bestselling title is the most comprehensive single text on all aspects of biomaterials science from principles to applications. Biomaterials Science, fourth edition, provides a balanced, insightful approach to both the learning of the science and technology of biomaterials and acts as the key reference for practitioners who are involved in the applications of materials in medicine.This new edition incorporates key updates to reflect the latest relevant research in the field, particularly in the applications section, which includes the latest in topics such as nanotechnology, robotic implantation, and biomaterials utilized in cancer research detection and therapy. Other additions include regenerative engineering, 3D printing, personalized medicine and organs on a chip. Translation from the lab to commercial products is emphasized with new content dedicated to medical device development, global issues related to translation, and issues of quality assurance and reimbursement. In response to customer feedback, the new edition also features consolidation of redundant material to ensure clarity and focus. Biomaterials Science, 4th edition is an important update to the best-selling text, vital to the biomaterials’ community. The most comprehensive coverage of principles and applications of all classes of biomaterials Edited and contributed by the best-known figures in the biomaterials field today; fully endorsed and supported by the Society for Biomaterials Fully revised and updated to address issues of translation, nanotechnology, additive manufacturing, organs on chip, precision medicine and much more. Online chapter exercises available for most chapters
Download or read book ASM Specialty Handbook written by Joseph R. Davis and published by ASM International. This book was released on 1997-01-01 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials covered include carbon, alloy and stainless steels; alloy cast irons; high-alloy cast steels; superalloys; titanium and titanium alloys; refractory metals and alloys; nickel-chromium and nickel-thoria alloys; structural intermetallics; structural ceramics, cermets, and cemented carbides; and carbon-composites.
Download or read book Advances in Catalysis written by and published by Academic Press. This book was released on 1953-01-01 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the current volume a variety of subjects is treated by competent authors. These subjects deal with new techniques of surface investigations with the microbalance, with the elucidation of reaction mechanisms by the concept of intermediates, and with specialized studies of the ammonia synthesis, hydrogenations, carbon monoxide oxidation and hydrocarbon syntheses. In addition, Volume V contains an extensive critical review of Russian literature in catalysis.
Download or read book Thin Films and Heterostructures for Oxide Electronics written by Satishchandra B. Ogale and published by Springer Science & Business Media. This book was released on 2005-11-21 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oxides form a broad subject area of research and technology development which encompasses different disciplines such as materials science, solid state chemistry, physics etc. The aim of this book is to demonstrate the interplay of these fields and to provide an introduction to the techniques and methodologies involving film growth, characterization and device processing. The literature in this field is thus fairly scattered in different research journals covering one or the other aspect of the specific activity. This situation calls for a book that will consolidate this information and thus enable a beginner as well as an expert to get an overall perspective of the field, its foundations, and its projected progress.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1990 with total page 852 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Nanophysics written by Klaus D. Sattler and published by CRC Press. This book was released on 2010-09-17 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Nanophysics: Functional Nanomaterials illustrates the importance of tailoring nanomaterials to achieve desired functions in applications. Each peer-reviewed chapter contains a broad-based introduction and enhances understanding of the state-of-the-art scientific content through fundamental equations and illustrations, some in color.This