Download or read book Gallium Oxide written by Stephen Pearton and published by Elsevier. This book was released on 2018-10-15 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gallium Oxide: Technology, Devices and Applications discusses the wide bandgap semiconductor and its promising applications in power electronics, solar blind UV detectors, and in extreme environment electronics. It also covers the fundamental science of gallium oxide, providing an in-depth look at the most relevant properties of this materials system. High quality bulk Ga2O3 is now commercially available from several sources and n-type epi structures are also coming onto the market. As researchers are focused on creating new complex structures, the book addresses the latest processing and synthesis methods. Chapters are designed to give readers a complete picture of the Ga2O3 field and the area of devices based on Ga2O3, from their theoretical simulation, to fabrication and application. - Provides an overview of the advantages of the gallium oxide materials system, the advances in in bulk and epitaxial crystal growth, device design and processing - Reviews the most relevant applications, including photodetectors, FETs, FINFETs, MOSFETs, sensors, catalytic applications, and more - Addresses materials properties, including structural, mechanical, electrical, optical, surface and contact

Download or read book Oxide Based Materials and Structures written by Rada Savkina and published by CRC Press. This book was released on 2020-05-07 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oxide-based materials and structures are becoming increasingly important in a wide range of practical fields including microelectronics, photonics, spintronics, power harvesting, and energy storage in addition to having environmental applications. This book provides readers with a review of the latest research and an overview of cutting-edge patents received in the field. It covers a wide range of materials, techniques, and approaches that will be of interest to both established and early-career scientists in nanoscience and nanotechnology, surface and material science, and bioscience and bioengineering in addition to graduate students in these areas. Features: Contains the latest research and developments in this exciting and emerging field Explores both the fundamentals and applications of the research Covers a wide range of materials, techniques, and approaches

Download or read book Zinc Oxide Materials for Electronic and Optoelectronic Device Applications written by Cole W. Litton and published by John Wiley & Sons. This book was released on 2011-03-23 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: Zinc Oxide (ZnO) powder has been widely used as a white paint pigment and industrial processing chemical for nearly 150 years. However, following a rediscovery of ZnO and its potential applications in the 1950s, science and industry alike began to realize that ZnO had many interesting novel properties that were worthy of further investigation. ZnO is a leading candidate for the next generation of electronics, and its biocompatibility makes it viable for medical devices. This book covers recent advances including crystal growth, processing and doping and also discusses the problems and issues that seem to be impeding the commercialization of devices. Topics include: Energy band structure and spintronics Fundamental optical and electronic properties Electronic contacts of ZnO Growth of ZnO crystals and substrates Ultraviolet photodetectors ZnO quantum wells Zinc Oxide Materials for Electronic and Optoelectronic Device Applications is ideal for university, government, and industrial research and development laboratories, particularly those engaged in ZnO and related materials research.

Download or read book Metal Oxide Based Heterostructures written by Naveen Kumar and published by Elsevier. This book was released on 2022-11-13 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide–Based Heterostructures: Fabrication and Applications provides information on synthesis strategies, structural and hierarchical features, morphological characteristics of metal oxide–based heterostructures, and their diverse applications. This book begins with an introduction to the various multidimensional heterostructures, synthesis aspects, and techniques used to control the formation of heterostructures. Then, the impact of synthesis routes on the formation of mixed metal oxide heterostructures and their properties are analyzed. The effect of nonmetal doping, metal doping, and composites of metal oxide heterostructures on the properties of heterostructures is also addressed and that also includes opportunities for optimization of the material's performance for specific applications. Special attention is given to the surface characteristics of the metal oxide heterostructures and their impact on the material's performance, and the applications of metal oxide heterostructures in various fields such as environmental remediation, sensing, organic catalysis, photovoltaics, light emitting materials, and hydrogen production. - Introduces key principles for metal oxide heterostructures, their properties, key characteristics, and synthesis routes - Emphasizes the relationship between synthesis strategies and material performance, including optimization strategies such as tailoring the material's surface characteristics or structure - Discusses metal oxide heterostructures and their application in lighting and displays, energy, environment, and sensing

Download or read book Metal Oxide Based Nanofibers and Their Applications written by Vincenzo Esposito and published by Elsevier. This book was released on 2021-10-25 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide-based Nanofibers and their Applications provides an in-depth overview on developments surrounding the synthesis, characterization properties, and applications achieved by scientific leaders in the area. Sections deal with the theoretical and experimental aspects of the synthesis and methodologies to control microstructure, composition and shape of the nanofibrous metal oxides, review the applications of metal oxide nanofibers in diverse technologies, with special focus on the relation between the structural, morphological and compositional features of the nanofibers, cover applications of metal oxide nanofibers in the fields of sensing (biosensing, gas sensing), and consider biomedical and cleaning technologies. Lastly, a final section covers their application in energy generation and storage technologies (e. g. piezoelectric, solar cells, solid oxide fuel cells, lithium-ion batteries, supercapacitors, and hydrogen storage are reviewed. - Reviews electrospinning methods for the synthesis and design of nanocomposites and hybrid metal oxide nanofibers - Discusses applications of metal oxide nanofibers in sensing, biomedical fields, cleaning technologies, and energy - Emphasizes the structural, morphological and compositional properties of nanofibers and their effect on device performance

Download or read book Oxide Thermoelectric Materials written by Yuan-Hua Lin and published by John Wiley & Sons. This book was released on 2019-10-28 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book of its kind?providing comprehensive information on oxide thermoelectrics This timely book explores the latest research results on the physics and materials science of oxide thermoelectrics at all scales. It covers the theory, design and properties of thermoelectric materials as well as fabrication technologies for devices and their applications. Written by three distinguished materials scientists, Oxide Thermoelectric Materials reviews: the fundamentals of electron and phonon transport; modeling of thermoelectric modules and their optimization; synthetic processes, structures, and properties of thermoelectric materials such as Bi2Te3- and skutterudite-based materials and Si-Ge alloys. In addition, the book provides a detailed description of the construction of thermoelectric devices and their applications. -Contains fundamentals and applications of thermoelectric materials and devices, and discusses their near-future perspectives -Introduces new, promising materials and technologies, such as nanostructured materials, perovskites, and composites -Paves the way for increased conversion efficiencies of oxides -Authored by well-known experts in the field of thermoelectrics Oxide Thermoelectric Materials is a well-organized guidebook for graduate students involved in physics, chemistry, or materials science. It is also helpful for researchers who are getting involved in thermoelectric research and development.

Download or read book Zinc Oxide written by Hadis Morkoç and published by John Wiley & Sons. This book was released on 2008-12-03 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first systematic, authoritative and thorough treatment in one comprehensive volume presents the fundamentals and technologies of the topic, elucidating all aspects of ZnO materials and devices. Following an introduction, the authors look at the general properties of ZnO, as well as its growth, optical processes, doping and ZnO-based dilute magnetic semiconductors. Concluding sections treat bandgap engineering, processing and ZnO nanostructures and nanodevices. Of interest to device engineers, physicists, and semiconductor and solid state scientists in general.

Download or read book GaN and ZnO based Materials and Devices written by Stephen Pearton and published by Springer Science & Business Media. This book was released on 2012-01-14 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: The AlInGaN and ZnO materials systems have proven to be one of the scientifically and technologically important areas of development over the past 15 years, with applications in UV/visible optoelectronics and in high-power/high-frequency microwave devices. The pace of advances in these areas has been remarkable and the wide band gap community relies on books like the one we are proposing to provide a review and summary of recent progress.

Download or read book Metal Oxide Based Thin Film Structures written by Nini Pryds and published by . This book was released on 2017 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Resistive Switching Oxide Materials Mechanisms Devices and Operations written by Jennifer Rupp and published by Springer Nature. This book was released on 2021-10-15 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a broad examination of redox-based resistive switching memories (ReRAM), a promising technology for novel types of nanoelectronic devices, according to the International Technology Roadmap for Semiconductors, and the materials and physical processes used in these ionic transport-based switching devices. It covers defect kinetic models for switching, ReRAM deposition/fabrication methods, tuning thin film microstructures, and material/device characterization and modeling. A slate of world-renowned authors address the influence of type of ionic carriers, their mobility, the role of the local and chemical composition and environment, and facilitate readers’ understanding of the effects of composition and structure at different length scales (e.g., crystalline vs amorphous phases, impact of extended defects such as dislocations and grain boundaries). ReRAMs show outstanding potential for scaling down to the atomic level, fast operation in the nanosecond range, low power consumption, and non-volatile storage. The book is ideal for materials scientists and engineers concerned with novel types of nanoelectronic devices such as memories, memristors, and switches for logic and neuromorphic computing circuits beyond the von Neumann concept.

Download or read book Gallium Oxide written by Masataka Higashiwaki and published by Springer Nature. This book was released on 2020-04-23 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides comprehensive coverage of the new wide-bandgap semiconductor gallium oxide (Ga2O3). Ga2O3 has been attracting much attention due to its excellent materials properties. It features an extremely large bandgap of greater than 4.5 eV and availability of large-size, high-quality native substrates produced from melt-grown bulk single crystals. Ga2O3 is thus a rising star among ultra-wide-bandgap semiconductors and represents a key emerging research field for the worldwide semiconductor community. Expert chapters cover physical properties, synthesis, and state-of-the-art applications, including materials properties, growth techniques of melt-grown bulk single crystals and epitaxial thin films, and many types of devices. The book is an essential resource for academic and industry readers who have an interest in, or plan to start, a new R&D project related to Ga2O3.

Download or read book Ferroelectricity in Doped Hafnium Oxide written by Uwe Schroeder and published by Woodhead Publishing. This book was released on 2019-03-27 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ferroelectricity in Doped Hafnium Oxide: Materials, Properties and Devices covers all aspects relating to the structural and electrical properties of HfO2 and its implementation into semiconductor devices, including a comparison to standard ferroelectric materials. The ferroelectric and field-induced ferroelectric properties of HfO2-based films are considered promising for various applications, including non-volatile memories, negative capacitance field-effect-transistors, energy storage, harvesting, and solid-state cooling. Fundamentals of ferroelectric and piezoelectric properties, HfO2 processes, and the impact of dopants on ferroelectric properties are also extensively discussed in the book, along with phase transition, switching kinetics, epitaxial growth, thickness scaling, and more. Additional chapters consider the modeling of ferroelectric phase transformation, structural characterization, and the differences and similarities between HFO2 and standard ferroelectric materials. Finally, HfO2 based devices are summarized. - Explores all aspects of the structural and electrical properties of HfO2, including processes, modelling and implementation into semiconductor devices - Considers potential applications including FeCaps, FeFETs, NCFETs, FTJs and more - Provides comparison of an emerging ferroelectric material to conventional ferroelectric materials with insights to the problems of downscaling that conventional ferroelectrics face

Download or read book Electrochromic Materials and Devices written by Roger J. Mortimer and published by John Wiley & Sons. This book was released on 2015-10-26 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrochromic materials can change their properties under the influence of an electrical voltage or current. Different classes of materials show this behavior such as transition metal oxides, conjugated polymers, metal-coordinated complexes and organic molecules. As the color change is persistent, the electric field needs only to be applied to initiate the switching, allowing for applications such as low-energy consumption displays, light-adapting mirrors in the automobile industry and smart windows for which the amount of transmitted light and heat can be controlled. The first part of this book describes the different classes and processing techniques of electrochromic materials. The second part highlights nanostructured electrochromic materials and device fabrication, and the third part focuses on the applications such as smart windows, adaptive camouflage, biomimicry, wearable displays and fashion. The last part rounds off the book by device case studies and environmental impact issues.

Download or read book Oxide Electronics written by Asim K. Ray and published by John Wiley & Sons. This book was released on 2021-04-12 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oxide Electronics Multiple disciplines converge in this insightful exploration of complex metal oxides and their functions and properties Oxide Electronics delivers a broad and comprehensive exploration of complex metal oxides designed to meet the multidisciplinary needs of electrical and electronic engineers, physicists, and material scientists. The distinguished author eschews complex mathematics whenever possible and focuses on the physical and functional properties of metal oxides in each chapter. Each of the sixteen chapters featured within the book begins with an abstract and an introduction to the topic, clear explanations are presented with graphical illustrations and relevant equations throughout the book. Numerous supporting references are included, and each chapter is self-contained, making them perfect for use both as a reference and as study material. Readers will learn how and why the field of oxide electronics is a key area of research and exploitation in materials science, electrical engineering, and semiconductor physics. The book encompasses every application area where the functional and electronic properties of various genres of oxides are exploited. Readers will also learn from topics like: Thorough discussions of High-k gate oxide for silicon heterostructure MOSFET devices and semiconductor-dielectric interfaces An exploration of printable high-mobility transparent amorphous oxide semiconductors Treatments of graphene oxide electronics, magnetic oxides, ferroelectric oxides, and materials for spin electronics Examinations of the calcium aluminate binary compound, perovoksites for photovoltaics, and oxide 2Degs Analyses of various applications for oxide electronics, including data storage, microprocessors, biomedical devices, LCDs, photovoltaic cells, TFTs, and sensors Suitable for researchers in semiconductor technology or working in materials science, electrical engineering, and physics, Oxide Electronics will also earn a place in the libraries of private industry researchers like device engineers working on electronic applications of oxide electronics. Engineers working on photovoltaics, sensors, or consumer electronics will also benefit from this book.

Download or read book Tin Oxide Materials written by Marcelo Ornaghi Orlandi and published by Elsevier. This book was released on 2019-10-05 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tin Oxide Materials: Synthesis, Properties, and Applications discusses the latest in metal oxides, an emerging area in electronic materials. As more is learned about this important materials system, more functionalities and applications have been revealed. This key reference on the topic covers important material that is ideal for materials scientists, materials engineers and materials chemists who have been introduced to metal oxides as a general category of materials, but want to take the next step and learn more about a specific material. - Provides a complete resource on tin oxide materials systems, including in-depth discussions of properties, their synthesis, modelling methods, and applications - Presents information on the well-investigated SnO2, but also includes discussions on its emerging stoichiometries, such as SnO and Sn3O4 - Includes the most relevant applications in varistors, sensing devices, fuel cells, transistors, biological studies, and much more

Download or read book Zinc Oxide Based Nano Materials and Devices written by , Prof. Dr. Ahmed Nahhas and published by BoD – Books on Demand. This book was released on 2019-10-09 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a review of recent advances in ZnO-based nanomaterials and devices. ZnO as a nanomaterial has gained substantial interest in the research area of wide bandgap semiconductors and is considered to be one of the major candidates for electronic and photonic applications. ZnO has distinguished and interesting electrical and optical properties and is considered to be a potential material in optoelectronic applications such as solar cells, surface acoustic wave devices, and UV emitters. ZnO's unique properties have attracted several researchers to study its electrical and optical properties. As a nanostructured material, ZnO exhibits many advantages for nanodevices. Moreover, it has the ability to absorb the UV radiation.

Download or read book Handbook of GaN Semiconductor Materials and Devices written by Wengang (Wayne) Bi and published by CRC Press. This book was released on 2017-10-20 with total page 775 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses material growth, device fabrication, device application, and commercialization of energy-efficient white light-emitting diodes (LEDs), laser diodes, and power electronics devices. It begins with an overview on basics of semiconductor materials, physics, growth and characterization techniques, followed by detailed discussion of advantages, drawbacks, design issues, processing, applications, and key challenges for state of the art GaN-based devices. It includes state of the art material synthesis techniques with an overview on growth technologies for emerging bulk or free standing GaN and AlN substrates and their applications in electronics, detection, sensing, optoelectronics and photonics. Wengang (Wayne) Bi is Distinguished Chair Professor and Associate Dean in the College of Information and Electrical Engineering at Hebei University of Technology in Tianjin, China. Hao-chung (Henry) Kuo is Distinguished Professor and Associate Director of the Photonics Center at National Chiao-Tung University, Hsin-Tsu, Taiwan, China. Pei-Cheng Ku is an associate professor in the Department of Electrical Engineering & Computer Science at the University of Michigan, Ann Arbor, USA. Bo Shen is the Cheung Kong Professor at Peking University in China.