Download or read book Synthetic Polymer Chemistry written by Zheng Zhao and published by Royal Society of Chemistry. This book was released on 2019-09-09 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing demand for polymers with new structures and functions has inspired the development of new synthetic techniques. This book focuses on breakthroughs and progress in synthetic polymer chemistry, providing efficient tools for the synthesis of linear and topological polymers. Synthetic Polymer Chemistry will be a valuable reference for those working in polymer chemistry, as well as students and researchers interested in opto-electronic, biological and materials sciences.
Download or read book Introduction to Synthetic Polymers written by Ian McIntyre Campbell and published by Oxford University Press, USA. This book was released on 1994 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This clear and concise textbook introduces the huge field of polymer science to students taking degree courses in chemistry, materials science and related subjects covering polymers. By focusing on the few major polymers, for example polystyrene and PVC, which are in common use and which thestudents will recognize, the book illustrates simply the basic principles of polymer science. It looks at the factors which give rise to the special properties of polymers, and emphasizes how polymer molecules can be synthesised with different sizes and architectures to tailor the properties of theresulting material. The later chapters then introduce a wide range of polymers, some with special applications now and others with exciting potential for the future. There are exercises at the end of each chapter.
Download or read book Analytical Pyrolysis of Synthetic Organic Polymers written by Serban C. Moldoveanu and published by Elsevier. This book was released on 2005-01-20 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analytical Pyrolysis of Synthetic Organic Polymers is a follow-up to Analytical Pyrolysis of Natural Organic Polymers, which is volume 20 of the series. The main focus of the book is on practical applications of analytical pyrolysis in synthetic organic polymer identification and characterization. The first part of the book has five chapters including an introduction, a discussion on physico-chemistry of thermal degradation of synthetic polymers and on instrumentation used in analytical pyrolysis, a chapter discussing what type of information can be obtained from analytical pyrolysis, and a chapter dedicated to the analysis and characterization of synthetic polymers.The second part systematically covers the analytical pyrolysis of various classes of synthetic polymers. Some theoretical background for the understanding of polymer structure using analytical pyrolysis is also discussed.* Includes broad coverage of organic synthetic macromolecules* Focuses on physico-chemistry of thermal degradation, and the analytical pyrolysis of various classes of synthetic polymers* Is well written and suitable for both researchers and chemists working in analytical chemistry or in synthetic polymers
Download or read book Organic Chemistry of Synthetic High Polymers written by Robert W. Lenz and published by . This book was released on 1967 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Synthetic Polymers written by D. Feldman and published by Springer Science & Business Media. This book was released on 1996-05-31 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synthetic Polymers is a comprehensive introduction to the technologies involved in the synthesis of the main classes of engineering high polymers used in such materials as plastics, fibers, rubbers, foams, adhesives and coatings. Besides the basic processes, this volume includes information on physical, chemical and mechanical characteristics - key factors with respect to obtaining the right end products. It also focuses on the main application of synthetic polymers in different engineering areas and gives data on production and consumption. Over 60 technological flowcharts are presented in a clear and concise manner, to provide the reader with essential information on relevant operations.
Download or read book Light Associated Reactions of Synthetic Polymers written by A. Ravve and published by Springer Science & Business Media. This book was released on 2007-01-15 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book combines theoretical explanations of the reactions of light and polymeric materials with development of light responsive polymeric materials for various practical applications. Photo associated reactions and light responsive materials have great potential to improve existing industrial processes, including capturing solar energy. This book presents a range of reactions and materials with some of the most exciting current and future applications.
Download or read book Natural and Synthetic Polymers written by Henry I. Bolker and published by . This book was released on 1974 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Organic and Physical Chemistry of Polymers written by Yves Gnanou and published by John Wiley & Sons. This book was released on 2008-03-03 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organic and Physical Chemistry of Polymers provides a thorough introduction to the fundamentals of polymers, including their structure and synthesis as well as their chemical and physical properties. This accessible guide illuminates the increasingly important role of polymers in modern chemistry, beginning with the essentials, then covering thermodynamics, conformation, morphology, and measurements of molar masses; polymerization mechanisms, reaction of polymers, synthesis of block and graft polymers, and complex topologies; and the mechanical properties, rheology, polymer processing, and fabrication of fibers and films.
Download or read book Organic Polymer Chemistry written by K. J. Saunders and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the organic chemistry of polymers which find technological use as adhesives, fibres, paints, plastics and rubbers. For the most part, only polymers which are of commercial significance are considered and the primary aim of the book is to relate theoretical aspects to industrial practice. The book is mainly intended for use by students in technical institutions and universities who are specializing in polymer science and by graduates who require an introduction to this field. Several excellent books have recently appeared dealing with the physical chemistry of polymers but the organic chemistry of polymers has not received so much attention. In recognition of this situation and because the two aspects of polymer chemistry are often taught separately, this book deals specifically with organic chemistry and topics of physical chemistry have been omitted. Also, in this way the book has been kept to a reasonable size. This is not to say that integration of the two areas of polymer science is undesirable; on the contrary, it is of the utmost importance that the inter-relationship should b~ appreciated. I wish to record my thanks to my colleagues with whom I have had many helpful discussions, particularly Mrs S. L. Radchenko. I also thank Miss E. Friesen for obtaining many books and articles on my behalf and Mr H. Harms for encouragement and assistance. I am also grateful to Mrs M. Stevens who skilfully prepared the manuscript. Department of Chemical and Metallurgical Technology, Ryerson Polytechnical Institute, K. J. S.
Download or read book Pyrolysis GC MS Data Book of Synthetic Polymers written by Shin Tsuge and published by Elsevier. This book was released on 2011-08-02 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this data book, both conventional Py-GC/MS where thermal energy alone is used to cause fragmentation of given polymeric materials and reactive Py-GC/MS in the presence of organic alkaline for condensation polymers are compiled. Before going into detailed presentation of the data, however, acquiring a firm grip on the proper understanding about the situation of Py-GC/MS would promote better utilization of the following pyrolysis data for various polymers samples. This book incorporates recent technological advances in analytical pyrolysis methods especially useful for the characterization of 163 typical synthetic polymers. The book briefly reviews the instrumentation available in advanced analytical pyrolysis, and offers guidance to perform effectually this technique combining with gas chromatography and mass spectrometry. Main contents are comprehensive sample pyrograms, thermograms, identification tables, and representative mass spectra (MS) of pyrolyzates for synthetic polymers. This edition also highlights thermally-assisted hydrolysis and methylation technique effectively applied to 33 basic condensation polymers. - Coverage of Py-GC/MS data of conventional pyrograms and thermograms of basic 163 kinds of synthetic polymers together with MS and retention index data for pyrolyzates, enabling a quick identification - Additional coverage of the pyrograms and their related data for 33 basic condensation polymers obtained by the thermally-assisted hydrolysis and methylation technique - All compiled data measured under the same experimental conditions for pyrolysis, gas chromatography and mass spectrometry to facilitate peak identification - Surveyable instant information on two facing pages dedicated to the whole data of a given polymer sample
Download or read book NMR Methods for Characterization of Synthetic and Natural Polymers written by Rongchun Zhang and published by Royal Society of Chemistry. This book was released on 2019-07-29 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the introduction of FT-NMR spectroscopy around five decades ago, NMR has achieved significant advances in hardware and methodologies, accompanied with the enhancement of spectral resolution and signal sensitivity. Rapid developments in the polymers field mean that accurate and quantitative characterization of polymer structures and dynamics is the keystone for precisely regulating and controlling the physical and chemical properties of the polymer. This book specifically focuses on NMR investigation of complex polymers for the polymer community as well as NMR spectroscopists, and will push the development of both fields. It covers the latest advances, for example high field DNP and ultrafast MAS methodologies, and show how these novel NMR methods characterize various synthetic and natural polymers.
Download or read book Natural and Synthetic Biomedical Polymers written by Sangamesh G. Kum bar and published by Newnes. This book was released on 2014-01-21 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers are important and attractive biomaterials for researchers and clinical applications due to the ease of tailoring their chemical, physical and biological properties for target devices. Due to this versatility they are rapidly replacing other classes of biomaterials such as ceramics or metals. As a result, the demand for biomedical polymers has grown exponentially and supports a diverse and highly monetized research community. Currently worth $1.2bn in 2009 (up from $650m in 2000), biomedical polymers are expected to achieve a CAGR of 9.8% until 2015, supporting a current research community of approximately 28,000+. Summarizing the main advances in biopolymer development of the last decades, this work systematically covers both the physical science and biomedical engineering of the multidisciplinary field. Coverage extends across synthesis, characterization, design consideration and biomedical applications. The work supports scientists researching the formulation of novel polymers with desirable physical, chemical, biological, biomechanical and degradation properties for specific targeted biomedical applications. - Combines chemistry, biology and engineering for expert and appropriate integration of design and engineering of polymeric biomaterials - Physical, chemical, biological, biomechanical and degradation properties alongside currently deployed clinical applications of specific biomaterials aids use as single source reference on field. - 15+ case studies provides in-depth analysis of currently used polymeric biomaterials, aiding design considerations for the future
Download or read book Introduction to Polymer Chemistry Fourth Edition written by Charles E. Carraher Jr. and published by CRC Press. This book was released on 2017-01-06 with total page 950 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Polymer Chemistry provides undergraduate students with a much-needed, well-rounded presentation of the principles and applications of natural, synthetic, inorganic, and organic polymers. With an emphasis on the environment and green chemistry and materials, this fourth edition continues to provide detailed coverage of natural and synthetic giant molecules, inorganic and organic polymers, elastomers, adhesives, coatings, fibers, plastics, blends, caulks, composites, and ceramics. Building on undergraduate work in foundational courses, the text fulfills the American Chemical Society Committee on Professional Training (ACS CPT) in-depth course requirement
Download or read book Synthetic Polymer Chemistry written by Zheng Zhao and published by Royal Society of Chemistry. This book was released on 2019-09-09 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymeric materials form the basis of daily life. Despite the great contribution of traditional methodologies such as anionic and radical polymerizations in preparing various functional polymers, the increasing demand for polymers with new structures and functions has inspired the development of new synthetic techniques. Many new polymerizations including click polymerization, controlled/living radical polymerization, multicomponent polymerization have been well developed. Focusing on breakthroughs and recent progress, Synthetic Polymer Chemistry provides efficient tools for the synthesis of linear and topological polymers. Chapters cover topics including fabrication of supramolecular polymers, organocatalytic synthesis and olefin co(polymerization). This title will be a valuable reference for those working in polymer chemistry, as well as students and researchers interested in opto-electronic, biological and materials sciences.
Download or read book New Methods for Polymer Synthesis written by W.J. Mijs and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: The art and science of macromolecular architecture is based on synthesis, analysis, processing, and evaluation of physical properties of polymers. The growing specificity of available synthetic methods and the increasing refinement of analytical and physical analysis are gradually providing a deeper insight into structure-property relationships of polymers, upon which many applications can be based. This book deals with recent methods for polymer synthesis. Those that lead to specific structures have been selected especially. Background, mechanism scope and limitations, and illustrative procedures are given for each method. With this layout the editor hopes that the book will provide a practical guideline, for the synthetic polymer chemist in industry or at a university graduate school, on how to apply the methods in the design of new polymer structures. The editor is grateful to the authors not only for their contributions containing interesting new developments in polymer synthesis, but also for the way they have fitted their text into the general framework of the book. The elegant chemistry described in the following chapters will, it is hoped, inspire more organic chemists to apply their skills to polymer synthesis, where the beauty of organic chemistry in terms of structural control and reactivity may be even more apparent than in the low molecular field.
Download or read book Water Soluble Synthetic Polymers written by Philip Molyneux and published by CRC Press. This book was released on 2018-04-05 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although several monographs and reviews have appeared on individual polymers of this type, and their applications and other technical aspects have also been discussed, this is apparently the first book to deal with the physical chemistry of water-soluble synthetic polymers as a group. This collective survey enables their properties and behaviour to be compared, and to be correlated with their molecular structures for predictive purposes. However, this has made it necessary to critically re-appraise much of the earlier fundamental work, so that current discussion of more recent work can be put on ta proper basis. Thus, of the 1800 or so references cited, the middle two-thirds related to the twenty-year period centred on about 1968. Nevertheless, sufficient key recent references have also been included so that the existing ‘state of the art is delineated.
Download or read book Synthesis of Polymers written by Dieter A. Schlüter and published by John Wiley & Sons. This book was released on 2012-05-23 with total page 1229 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers are huge macromolecules composed of repeating structural units. While polymer in popular usage suggests plastic, the term actually refers to a large class of natural and synthetic materials. Due to the extraordinary range of properties accessible, polymers have come to play an essential and ubiquitous role in everyday life - from plastics and elastomers on the one hand to natural biopolymers such as DNA and proteins on the other hand. The study of polymer science begins with understanding the methods in which these materials are synthesized. Polymer synthesis is a complex procedure and can take place in a variety of ways. This book brings together the "Who is who" of polymer science to give the readers an overview of the large field of polymer synthesis. It is a one-stop reference and a must-have for all Chemists, Polymer Chemists, Chemists in Industry, and Materials Scientists.
