Download or read book Optimisation globale de structures des convertisseurs statiques aspects C E M written by and published by . This book was released on 1997 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Conception et optimisation de convertisseurs statiques pour l lectronique de puissance written by Chérif Larouci and published by . This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: L'objectif de nos travaux de thèse est de réaliser une démarche d'optimisation des convertisseurs statiques la plus générale possible en s'appuyant sur des modèles analytiques et un environnement d'optimisation adéquat. Pour ce faire, nous avons choisi une structure flyback en absorption sinusoïdale comme un support significatif d'étude car elle regroupe la plupart des aspects qui intéressent le concepteur des convertisseurs statiques actuels (volume, pertes, compatibilité électromagnétique CEM, thermiques...). Ce processus d'optimisation réclame la mise au point de modèles capables de réaliser le compromis indispensable précision-rapidité de calcul. Ainsi, des modèles analytiques et des outils dédiés à l'optimisation ont été développés et intégrés dans une démarche d'optimisation sous contraintes. Les résultats de mesure viennent valider cette procédure d'optimisation.
Download or read book Conception et optimisation de convertisseurs statiques pour l lectronique de puissance written by Chérif Larouci and published by . This book was released on 2002 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: L'objectif de nos travaux de thèse est de réaliser une démarche d'optimisation des convertisseurs statiques la plus générale possible en s'appuyant sur des modèles analytiques et un environnement d'optimisation adéquat. Pour ce faire, nous avons choisi une structure flyback en absorption sinusoïdale comme un support significatif d'étude car elle regroupe la plupart des aspects qui intéressent le concepteur des convertisseurs statiques actuels (volume, pertes, compatibilité électromagnétique CEM, thermiques...). Ce processus d'optimisation réclame la mise au point de modèles capables de réaliser le compromis indispensable précision-rapidité de calcul. Ainsi, des modèles analytiques et des outils dédiés à l'optimisation ont été développés et intégrés dans une démarche d'optimisation sous contraintes. Les résultats de mesure viennent valider cette procédure d'optimisation.
Download or read book Inelastic Analysis of Structures under Variable Loads written by Dieter Weichert and published by Springer Science & Business Media. This book was released on 2001-11-30 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: The question whether a structure or a machine component can carry the applied loads, and with which margin of safety, or whether it will become unserviceable due to collapse or excessive inelastic deformations, has always been a major concern for civil and mechanical engineers. The development of methods to answer this technologically crucial question without analysing the evolution of the system under varying loads, has a long tradition that can be traced back even to the times of emerging mechanical sciences in the early 17th century. However, the scientific foundations of the theories underlying these methods, nowadays frequently called "direct", were established sporadically in the Thirties of the 20th century and systematically and rigorously in the Fifties. Further motivations for the development of direct analysis techniques in applied mechanics of solids and structures arise from the circumstance that in many engineering situations the external actions fluctuate according to time histories not a priori known except for some essential features, e.g. variation intervals. In such situations the critical events (or "limit states") to consider, besides plastic collapse, are incremental collapse (or "ratchetting") and alternating plastic yielding, namely lack of "shakedown". Non evolutionary, direct methods for ultimate limit state analysis of structures subjected to variably-repeated external actions are the objectives of most papers collected in this book, which also contains a few contributions on related topics.
Download or read book Mathematical Contributions to the Theory of Evolution written by Karl Pearson and published by . This book was released on 1904 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wind Energy written by Mathew Sathyajith and published by Springer Science & Business Media. This book was released on 2006-03-14 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: Growing energy demand and environmental consciousness have re-evoked human interest in wind energy. As a result, wind is the fastest growing energy source in the world today. Policy frame works and action plans have already been for- lated at various corners for meeting at least 20 per cent of the global energy - mand with new-renewables by 2010, among which wind is going to be the major player. In view of the rapid growth of wind industry, Universities, all around the world, have given due emphasis to wind energy technology in their undergraduate and graduate curriculum. These academic programmes attract students from diver- fied backgrounds, ranging from social science to engineering and technology. Fundamentals of wind energy conversion, which is discussed in the preliminary chapters of this book, have these students as the target group. Advanced resource analysis tools derived and applied are beneficial to academics and researchers working in this area. The Wind Energy Resource Analysis (WERA) software, provided with the book, is an effective tool for wind energy practitioners for - sessing the energy potential and simulating turbine performance at prospective sites.
Download or read book Real Time Optimization written by Dominique Bonvin and published by MDPI. This book was released on 2018-07-05 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Real-Time Optimization" that was published in Processes
Download or read book Power Electronics Semiconductor Devices written by Robert Perret and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book relates the recent developments in several key electrical engineering R&D labs, concentrating on power electronics switches and their use. The first sections deal with key power electronics technologies, MOSFETs and IGBTs, including series and parallel associations. The next section examines silicon carbide and its potentiality for power electronics applications and its present limitations. Then, a dedicated section presents the capacitors, key passive components in power electronics, followed by a modeling method allowing the stray inductances computation, necessary for the precise simulation of switching waveforms. Thermal behavior associated with power switches follows, and the last part proposes some interesting prospectives associated to Power Electronics integration.
Download or read book Energy Policy Review written by Great Britain. Department of Energy and published by . This book was released on 1977 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Inter Municipal Cooperation in Europe written by Rudie Hulst and published by Springer Science & Business Media. This book was released on 2007-05-11 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an overview of inter-municipal cooperation in eight European countries. Each country study sketches its attendant forms, their institutional design, the tasks and competencies attributed to joint authorities of municipalities and the way inter-municipal cooperation operates in practice. Both performance and democratic aspects of cooperation are recurring topics.
Download or read book Handbook of Spatial Statistics written by Alan E. Gelfand and published by CRC Press. This book was released on 2010-03-19 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: Assembling a collection of very prominent researchers in the field, the Handbook of Spatial Statistics presents a comprehensive treatment of both classical and state-of-the-art aspects of this maturing area. It takes a unified, integrated approach to the material, providing cross-references among chapters.The handbook begins with a historical intro
Download or read book Electric Renewable Energy Systems written by Muhammad H. Rashid and published by Academic Press. This book was released on 2015-11-25 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: This derivative volume stemming from content included in our seminal Power Electronics Handbook takes its chapters related to renewables and establishes them at the core of a new volume dedicated to the increasingly pivotal and as yet under-published intersection of Power Electronics and Alternative Energy. While this re-versioning provides a corollary revenue stream to better leverage our core handbook asset, it does more than simply re-package existing content. Each chapter will be significantly updated and expanded by more than 50%, and all new introductory and summary chapters will be added to contextualize and tie the volume together. Therefore, unlike traditional derivative volumes, we will be able to offer new and updated material to the market and include this largely original content in our ScienceDirect Energy collection. Due to the inherently multi-disciplinary nature of renewables, many engineers come from backgrounds in Physics, Materials, or Chemical Engineering, and therefore do not have experience working in-depth with electronics. As more and more alternative and distributed energy systems require grid hook-ups and on-site storage, a working knowledge of batteries, inverters and other power electronics components becomes requisite. Further, as renewables enjoy broadening commercial implementation, power electronics professionals are interested to learn of the challenges and strategies particular to applications in alternative energy. This book will bring each group up-to-speed with the primary issues of importance at this technological node. This content clarifies the juncture of two key coverage areas for our Energy portfolio: alternative sources and power systems. It serves to bridge the information in our power engineering and renewable energy lists, supporting the growing grid cluster in the former and adding key information on practical implementation to the latter. Provides a thorough overview of the key technologies, methods and challenges for implementing power electronics in alternative energy systems for optimal power generation Includes hard-to-find information on how to apply converters, inverters, batteries, controllers and more for stand-alone and grid-connected systems Covers wind and solar applications, as well as ocean and geothermal energy, hybrid systems and fuel cells
Download or read book An Introduction to R for Spatial Analysis and Mapping written by Chris Brunsdon and published by SAGE. This book was released on 2014-04-30 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: "In an age of big data, data journalism and with a wealth of quantitative information around us, it is not enough for students to be taught only 100 year old statistical methods using ′out of the box′ software. They need to have 21st-century analytical skills too. This is an excellent and student-friendly text from two of the world leaders in the teaching and development of spatial analysis. It shows clearly why the open source software R is not just an alternative to commercial GIS, it may actually be the better choice for mapping, analysis and for replicable research. Providing practical tips as well as fully working code, this is a practical ′how to′ guide ideal for undergraduates as well as those using R for the first time. It will be required reading on my own courses." - Richard Harris, Professor of Quantitative Social Science, University of Bristol R is a powerful open source computing tool that supports geographical analysis and mapping for the many geography and ‘non-geography’ students and researchers interested in spatial analysis and mapping. This book provides an introduction to the use of R for spatial statistical analysis, geocomputation and the analysis of geographical information for researchers collecting and using data with location attached, largely through increased GPS functionality. Brunsdon and Comber take readers from ‘zero to hero’ in spatial analysis and mapping through functions they have developed and compiled into R packages. This enables practical R applications in GIS, spatial analyses, spatial statistics, mapping, and web-scraping. Each chapter includes: Example data and commands for exploring it Scripts and coding to exemplify specific functionality Advice for developing greater understanding - through functions such as locator(), View(), and alternative coding to achieve the same ends Self-contained exercises for students to work through Embedded code within the descriptive text. This is a definitive ′how to′ that takes students - of any discipline - from coding to actual applications and uses of R.
Download or read book Statistical Methods for Spatial Data Analysis written by Oliver Schabenberger and published by CRC Press. This book was released on 2004-12-20 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding spatial statistics requires tools from applied and mathematical statistics, linear model theory, regression, time series, and stochastic processes. It also requires a mindset that focuses on the unique characteristics of spatial data and the development of specialized analytical tools designed explicitly for spatial data analysis. Statistical Methods for Spatial Data Analysis answers the demand for a text that incorporates all of these factors by presenting a balanced exposition that explores both the theoretical foundations of the field of spatial statistics as well as practical methods for the analysis of spatial data. This book is a comprehensive and illustrative treatment of basic statistical theory and methods for spatial data analysis, employing a model-based and frequentist approach that emphasizes the spatial domain. It introduces essential tools and approaches including: measures of autocorrelation and their role in data analysis; the background and theoretical framework supporting random fields; the analysis of mapped spatial point patterns; estimation and modeling of the covariance function and semivariogram; a comprehensive treatment of spatial analysis in the spectral domain; and spatial prediction and kriging. The volume also delivers a thorough analysis of spatial regression, providing a detailed development of linear models with uncorrelated errors, linear models with spatially-correlated errors and generalized linear mixed models for spatial data. It succinctly discusses Bayesian hierarchical models and concludes with reviews on simulating random fields, non-stationary covariance, and spatio-temporal processes. Additional material on the CRC Press website supplements the content of this book. The site provides data sets used as examples in the text, software code that can be used to implement many of the principal methods described and illustrated, and updates to the text itself.
Download or read book Smart Energy Empowerment in Smart and Resilient Cities written by Mustapha Hatti and published by Springer Nature. This book was released on 2019-12-24 with total page 703 pages. Available in PDF, EPUB and Kindle. Book excerpt: International Conference on Artificial Intelligence in Renewable Energetic Systems, IC-AIRES2019, 26-28 November 2019, Taghit-Bechar, Algeria. The challenges of the energy transition in the medium term lead to numerous technological breakthroughs in the areas of production, optimal distribution and the rational use of energy and renewable energy (energy efficiency and optimization of consumption, massive electrification, monitoring and control energy systems, cogeneration and energy recovery processes, new and renewable energies, etc.). The fall in the cost of renewable energies and the desire for a local control of energy production are today calling for a profound change in the electricity system. Local authorities are at the center of energy developments by taking into account the local nature of certain energy systems, heat networks, geothermal energy, waste heat recovery, and electricity generation from household waste. On the other side, digital sciences are at the heart of connected objects and intelligent products that combine information processing and communication capabilities with their environment. Digital technology is at the center of new systems engineering approaches (3D modeling, virtualization, simulation, digital prototyping, etc.) for the design and development of intelligent systems. The book deals with various topics ranging from the design, development and maintenance of energy production systems, transport, distribution or storage of energy, optimization of energy efficiency, especially in the use of energy. innovation in the fields of energy production from renewable energies, management of energy networks: electricity, fluids, gas, district heating, energy storage modes: battery, super-capacitors , overseeing energy supply through supervision, control and diagnosis, risk management, as well as the design and management of smart grids: microgrid, smartgrid. This imposes the model of energy empowerment in the advent of smart cities. Empower the world’s most vulnerable energy-poor citizens and establish growing and vibrant socioeconomic communities, by academics, students in engineering and data computing from around the world who have chosen an academic path leading to an electric power and energy engineering and artificial intelligence to advancing technology for the advantage of humanity.
Download or read book Frontiers in Water Energy Nexus Nature Based Solutions Advanced Technologies and Best Practices for Environmental Sustainability written by Vincenzo Naddeo and published by Springer Nature. This book was released on 2019-09-18 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume includes selected contributions presented during the 2nd edition of the international conference on WaterEnergyNEXUS which was held in Salerno, Italy in November 2018. This conference was organized by the Sanitary Environmental Engineering Division (SEED) of the University of Salerno (Italy) in cooperation with Advanced Institute of Water Industry at Kyungpook National University (Korea) and with The Energy and Resources Institute, TERI (India). The initiative received the patronage of UNESCO – World Water Association Programme (WWAP) and of the International Water Association (IWA) and was organized with the support of Springer (MENA Publishing Program), Arab Water Council (AWC), Korean Society of Environmental Engineering (KSEE) and Italian Society of Sanitary Environmental Engineering Professors (GITISA). With the support of international experts invited as plenary and keynote speakers, the conference aimed to give a platform for Euro-Mediterranean countries to share and discuss key topics on such water-energy issues through the presentation of nature-based solutions, advanced technologies and best practices for a more sustainable environment. This volume gives a general and brief overview on current research focusing on emerging Water-Energy-Nexus issues and challenges and its potential applications to a variety of environmental problems that are impacting the Euro-Mediterranean zone and surrounding regions. A selection of novel and alternative solutions applied worldwide are included. The volume contains over about one hundred carefully refereed contributions from 44 countries worldwide selected for the conference. Topics covered include (1) Nexus framework and governance, (2) Environmental solutions for the sustainable development of the water sector, (3) future clean energy technologies and systems under water constraints, (4) environmental engineering and management, (5) Implementation and best practices Intended for researchers in environmental engineering, environmental science, chemistry, and civil engineering. This volume is also an invaluable guide for industry professionals working in both water and energy sectors.
Download or read book Ballistic missile defense glossary written by and published by DIANE Publishing. This book was released on 1997 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt:
