Download or read book On 3D inverse design of centrifugal compressor impellers with splitter blades ASME 98 GT 507 written by M. Zangeneh and published by . This book was released on 1998 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presented at the International Gas Turbine & Aeroengine Congress & Exhibition, Stockholm, Sweden, Jun 2-5, 1998.
Download or read book Design and Analysis of Centrifugal Compressors written by Rene Van den Braembussche and published by John Wiley & Sons. This book was released on 2019-04-08 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview of fluid dynamic models and experimental results that can help solve problems in centrifugal compressors and modern techniques for a more efficient aerodynamic design. Design and Analysis of Centrifugal Compressors isacomprehensive overview of the theoretical fluid dynamic models describing the flow in centrifugal compressors and the modern techniques for the design of more efficient centrifugal compressors. The author — a noted expert in the field, with over 40 years of experience — evaluates relevant numerical and analytical prediction models for centrifugal compressors with special attention to their accuracy and limitations. Relevant knowledge from the last century is linked with new insights obtained from modern CFD. Emphasis is to link the flow structure, performance and stability to the geometry of the different compressor components. Design and Analysis of Centrifugal Compressors is an accessible resource that combines theory with experimental data and previous research with recent developments in computational design and optimization. This important resource Covers the basic information concerning fluid dynamics that are specific for centrifugal compressors and clarifies the differences with axial compressors Provides an overview of performance prediction models previously developed in combination with extra results from research conducted by the author Describes helpful numerical and analytical models for the flow in the different components in relation to flow stability, operating range and performance Includes the fundamental information for the aerodynamic design of more efficient centrifugal compressors Explains the use of computational fluid dynamics (CFD) for the design and analysis of centrifugal compressors Written for engineers, researchers and designers in industry as well as for academics specializing in the field, Design and Analysis of Centrifugal Compressors offers an up to date overview of the information needed for the design of more effective centrifugal compressors.
Download or read book A 3D automatic optimization strategy for design of centrifugal compressor impeller blades ASME 98 GT 128 written by K. F. C. Yiu and published by . This book was released on 1998 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presented at the International Gas Turbine & Aeroengine Congress & Exhibition, Stockholm, Sweden, June 2 - June 5, 1998.
Download or read book ASME Technical Papers written by and published by . This book was released on 2000 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 15th International Conference on Turbochargers and Turbocharging written by Institution of Mechanical Engineers and published by CRC Press. This book was released on 2023-05-05 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Institution’s International Conference on Turbochargers and Turbocharging (Twickenham, London, UK, 16-17 May 2023) returns to address the latest advances, research and developments in turbocharging system designs and boosting solutions. This volume presents a peer-reviewed collection of papers which will address current and novel turbocharging system choices and components with a renewed emphasis to address the challenges posed by emission regulations and market trends. The latest developments leading to enhanced performance and efficiency, increased durability and reduced emissions in line with meeting Net-Zero and global emissions targets. Topics include: Air management in powertrains: conventional, hybrids, fuel cells and novel configurations Alternate fuels and their needs in boosting (e.g. hydrogen, synthetic fuels) Electrification of turbochargers, compressors, and exhaust turbines Simulation and testing techniques, data analytics, including AI and digital twins Thermal management, waste heat recovery and expanders Turbomachinery aerodynamic: novel compressors & turbines and multi-stage systems. Component fatigue life, bearing design, rotor-dynamics and durability prediction Mechatronics, control, sensors and power electronics High speed turbomachinery in propulsion and power systems Future Legislation needs for thermal propulsion systems
Download or read book Application of a three dimensional inverse method to the design of a centrifugal compressor impeller ASME 98 GT 127 written by Alain Demeulenaere and published by . This book was released on 1998 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presented at the International Gas Turbine & Aeroengine Congress & Exhibition, Stockholm, Sweden, June 2 - June 5, 1998.
Download or read book Paper written by and published by . This book was released on 2000 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 4th European Conference on Turbomachinery written by Gerard Bois and published by S.G.E.. This book was released on 2001 with total page 1100 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design and Analysis of Centrifugal Compressors written by Rene Van den Braembussche and published by John Wiley & Sons. This book was released on 2019-01-14 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview of fluid dynamic models and experimental results that can help solve problems in centrifugal compressors and modern techniques for a more efficient aerodynamic design. Design and Analysis of Centrifugal Compressors isacomprehensive overview of the theoretical fluid dynamic models describing the flow in centrifugal compressors and the modern techniques for the design of more efficient centrifugal compressors. The author — a noted expert in the field, with over 40 years of experience — evaluates relevant numerical and analytical prediction models for centrifugal compressors with special attention to their accuracy and limitations. Relevant knowledge from the last century is linked with new insights obtained from modern CFD. Emphasis is to link the flow structure, performance and stability to the geometry of the different compressor components. Design and Analysis of Centrifugal Compressors is an accessible resource that combines theory with experimental data and previous research with recent developments in computational design and optimization. This important resource Covers the basic information concerning fluid dynamics that are specific for centrifugal compressors and clarifies the differences with axial compressors Provides an overview of performance prediction models previously developed in combination with extra results from research conducted by the author Describes helpful numerical and analytical models for the flow in the different components in relation to flow stability, operating range and performance Includes the fundamental information for the aerodynamic design of more efficient centrifugal compressors Explains the use of computational fluid dynamics (CFD) for the design and analysis of centrifugal compressors Written for engineers, researchers and designers in industry as well as for academics specializing in the field, Design and Analysis of Centrifugal Compressors offers an up to date overview of the information needed for the design of more effective centrifugal compressors.
Download or read book Inverse Design of Centrifugal Impellers by Simultaneous Modification of Blade Shape and Meridional Contour written by H. Passrucker and published by . This book was released on 2000 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Inverse design and Optimization Methods for Centrifugal Pump Impellers written by Remko Willem Westra and published by . This book was released on 2008 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Centrifugal Compressors written by Ronald H. Aungier and published by American Society of Mechanical Engineers. This book was released on 2000 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: A mechanical engineer with a Pennsylvania turbomachinery company, A ungier describes his own system and strategy for designing and analyzing centrifugal compressor aerodynamics. To address the novice as well as the experienced in the field, he presents the basic thermodynamic and fluid dynamic principles, empirical models, and key numerical methods that form the basis of his methods. His strategy, or design practice, he found harder to describe because it involves a process of reasoning rather than following an established set of principles. He recognizes that his is only one of many possible methods, but makes no effort to compare or contrast his with any other.
Download or read book Improved model for the design and analysis of centrifugal compressor volutes ASME 98 GT 187 written by R. A. Van den Braembussche and published by . This book was released on 1998 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presented at the International Gas Turbine & Aeroengine Congress & Exhibition, Stockholm, Sweden, June 2 - June 5, 1998.
Download or read book Gas Turbine Engineering Handbook written by Meherwan P. Boyce and published by Elsevier. This book was released on 2017-09-01 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Gas Turbine Engineering Handbook has been the standard for engineers involved in the design, selection, and operation of gas turbines. This revision includes new case histories, the latest techniques, and new designs to comply with recently passed legislation. By keeping the book up to date with new, emerging topics, Boyce ensures that this book will remain the standard and most widely used book in this field. The new Third Edition of the Gas Turbine Engineering Hand Book updates the book to cover the new generation of Advanced gas Turbines. It examines the benefit and some of the major problems that have been encountered by these new turbines. The book keeps abreast of the environmental changes and the industries answer to these new regulations. A new chapter on case histories has been added to enable the engineer in the field to keep abreast of problems that are being encountered and the solutions that have resulted in solving them. - Comprehensive treatment of Gas Turbines from Design to Operation and Maintenance. In depth treatment of Compressors with emphasis on surge, rotating stall, and choke; Combustors with emphasis on Dry Low NOx Combustors; and Turbines with emphasis on Metallurgy and new cooling schemes. An excellent introductory book for the student and field engineers - A special maintenance section dealing with the advanced gas turbines, and special diagnostic charts have been provided that will enable the reader to troubleshoot problems he encounters in the field - The third edition consists of many Case Histories of Gas Turbine problems. This should enable the field engineer to avoid some of these same generic problems
Download or read book Gas Turbine Performance written by Philip P. Walsh and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: A significant addition to the literature on gas turbine technology, the second edition of Gas Turbine Performance is a lengthy text covering product advances and technological developments. Including extensive figures, charts, tables and formulae, this book will interest everyone concerned with gas turbine technology, whether they are designers, marketing staff or users.
Download or read book Proceedings of the 5th International Conference on Industrial Engineering ICIE 2019 written by Andrey A. Radionov and published by Springer Nature. This book was released on 2019-11-14 with total page 1449 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights recent findings in industrial, manufacturing and mechanical engineering, and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering are discussed, including the dynamics of machines and working processes, friction, wear and lubrication in machines, surface transport and technological machines, manufacturing engineering of industrial facilities, materials engineering, metallurgy, control systems and their industrial applications, industrial mechatronics, automation and robotics. The book gathers selected papers presented at the 5th International Conference on Industrial Engineering (ICIE), held in Sochi, Russia in March 2019. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, the book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineering disciplines, and engineering graduates.
Download or read book Modeling and Simulation of Thermal Power Plants with ThermoSysPro written by Baligh El Hefni and published by Springer. This book was released on 2019-01-24 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains the modelling and simulation of thermal power plants, and introduces readers to the equations needed to model a wide range of industrial energy processes. Also featuring a wealth of illustrative, real-world examples, it covers all types of power plants, including nuclear, fossil-fuel, solar and biomass. The book is based on the authors’ expertise and experience in the theory of power plant modelling and simulation, developed over many years of service with EDF. In more than forty examples, they demonstrate the component elements involved in a broad range of energy production systems, with detailed test cases for each chemical, thermodynamic and thermo-hydraulic model. Each of the test cases includes the following information: • component description and parameterization data; • modelling hypotheses and simulation results; • fundamental equations and correlations, with their validity domains; • model validation, and in some cases, experimental validation; and • single-phase flow and two-phase flow modelling equations, which cover all water and steam phases. A practical volume that is intended for a broad readership, from students and researchers, to professional engineers, this book offers the ideal handbook for the modelling and simulation of thermal power plants. It is also a valuable aid in understanding the physical and chemical phenomena that govern the operation of power plants and energy processes.
