Download or read book Separation Technologies for the Industries of the Future written by Panel on Separation Technology for Industrial Reuse and Recycling and published by National Academies Press. This book was released on 1999-01-22 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: Separation processesor processes that use physical, chemical, or electrical forces to isolate or concentrate selected constituents of a mixtureare essential to the chemical, petroleum refining, and materials processing industries. In this volume, an expert panel reviews the separation process needs of seven industries and identifies technologies that hold promise for meeting these needs, as well as key technologies that could enable separations. In addition, the book recommends criteria for the selection of separations research projects for the Department of Energy's Office of Industrial Technology.
Download or read book Fundamentals of Petroleum Refining written by Mohamed A. Fahim and published by Elsevier. This book was released on 2009-11-19 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Petroleum Refining presents the fundamentals of thermodynamics and kinetics, and it explains the scientific background essential for understanding refinery operations. The text also provides a detailed introduction to refinery engineering topics, ranging from the basic principles and unit operations to overall refinery economics. The book covers important topics, such as clean fuels, gasification, biofuels, and environmental impact of refining, which are not commonly discussed in most refinery textbooks. Throughout the source, problem sets and examples are given to help the reader practice and apply the fundamental principles of refining. Chapters 1-10 can be used as core materials for teaching undergraduate courses. The first two chapters present an introduction to the petroleum refining industry and then focus on feedstocks and products. Thermophysical properties of crude oils and petroleum fractions, including processes of atmospheric and vacuum distillations, are discussed in Chapters 3 and 4. Conversion processes, product blending, and alkylation are covered in chapters 5-10. The remaining chapters discuss hydrogen production, clean fuel production, refining economics and safety, acid gas treatment and removal, and methods for environmental and effluent treatments. This source can serve both professionals and students (on undergraduate and graduate levels) of Chemical and Petroleum Engineering, Chemistry, and Chemical Technology. Beginners in the engineering field, specifically in the oil and gas industry, may also find this book invaluable. Provides balanced coverage of fundamental and operational topics Includes spreadsheets and process simulators for showing trends and simulation case studies Relates processing to planning and management to give an integrated picture of refining
Download or read book Oil Refining and the Petroleum Industry written by Matthew P. Brouwer and published by . This book was released on 2011-11 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The U.S. petroleum refining industry experienced what some have called a "golden age" during the years 2004-2007. During this period, the demand for petroleum products, especially gasoline, increased rapidly both in the United States and world markets. Refiners found favorable price-spreads between heavy and light crude oils, as well as between crude oil and refined products. The industry operated plants at nearly maximum capacity and posted record profit levels. This book examines current production capacity of refineries operating in the U.S. and the sources and changes in crude oil supply; the changing characteristics of petroleum and petroleum product markets and a discussion of the policy and regulatory factors that are likely to affect the structure and performance of the industry during the next decade.
Download or read book U S Oil Refining Industry Background in Changing Markets and Fuel Policies written by Anthony Andrews and published by DIANE Publishing. This book was released on 2010 with total page 43 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report begins by looking at the current production capacity of the oil refineries operating in the United States, and the sources and changes in crude oil supply. It then examines the changing characteristics of petroleum and petroleum product markets and identifies the effects of these changes on the refining industry. The report concludes with discussion of the policy and regulatory factors that are likely to affect the structure and performance of the industry during the next decade.
Download or read book Handbook of Petroleum Refining written by James G. Speight and published by CRC Press. This book was released on 2016-10-26 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum refining involves refining crude petroleum as well as producing raw materials for the petrochemical industry. This book covers current refinery processes and process-types that are likely to come on-stream during the next three to five decades. The book includes (1) comparisons of conventional feedstocks with heavy oil, tar sand bitumen, and bio-feedstocks; (2) properties and refinability of the various feedstocks; (3) thermal processes versus hydroprocesses; and (4) the influence of refining on the environment.
Download or read book Oil and Gas Production Handbook An Introduction to Oil and Gas Production written by Havard Devold and published by Lulu.com. This book was released on 2013 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Petroleum Refining Processes written by Robert A. Meyers and published by McGraw Hill Professional. This book was released on 2003-10-14 with total page 941 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Offers detailed description of process chemistry and thermodynamics and product by-product specifications of plants * Contributors are drawn from the largest petroleum producers in the world, including Chevron, Mobil, Shell, Exxon, UOP, and Texaco * Covers the very latest technologies in the field of petroleum refining processes * Completely updated 3rd Edition features 50% all new material
Download or read book Planning and Integration of Refinery and Petrochemical Operations written by Khalid Y. Al-Qahtani and published by John Wiley & Sons. This book was released on 2011-03-16 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clearly divided into three main sections, this practical book familiarizes readers with the area of planning in petroleum refining and petrochemical industry, while introducing several planning and modeling strategies encompassing single site refinery plants, multiple refinery networks, petrochemical networks, and refinery and petrochemical planning systems. It equally provides an insight into possible research directions and recommendations for the area of refinery and petrochemical planning. Furthermore, several appendices are included to explain the general background necessary, including stochastic programming, chance constraint programming, and robust optimization. For engineers and managers working in the petroleum industry as well as academic researchers in production, logistics, and supply chain management.
Download or read book The Evolution of the Oil Industry written by Victor Ross and published by Garden City, New York : Doubleday, Page. This book was released on 1920 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Petroleum Biotechnology written by James G. Speight and published by Gulf Professional Publishing. This book was released on 2017-12-11 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Petroleum Biotechnology introduces the petroleum engineer to biotechnology, bringing together the various biotechnology methods that are applied to recovery, refining and remediation in the uses of petroleum and petroleum products. A significant amount of petroleum is undiscoverable in reservoirs today using conventional and secondary methods. This reference explains how microbial enhanced oil recovery is aiding to produce more economical and environmentally-friendly metabolic events that lead to improved oil recovery. Meanwhile, in the downstream side of the industry, petroleum refining operators are facing the highest levels of environmental regulations while struggling to process more of the heavier crude oils since conventional physical and chemical refining techniques may not be applicable to heavier crudes. This reference proposes to the engineer and refining manager the concepts of bio-refining applications to not only render heavier crudes as lighter crudes through microbial degradation, but also through biodenitrogenation, biodemetallization and biodesulfurization, making more petroleum derivatives purified and upgraded without the release of more pollutants. Equipped for both upstream and downstream to learn the basics, this book is a necessary primer for today’s petroleum engineer. Presents the fundamentals behind petroleum biotechnology for both upstream and downstream oil and gas operations Provides the latest technology in reservoir recovery using microbial enhanced oil recovery methods Helps readers gain insight into the current and future application of using biotechnology as a refining and fuel blending method for heavy oil and tar sands
Download or read book The Refinery of the Future written by James G. Speight and published by William Andrew. This book was released on 2010-12-21 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: As feedstocks to refineries change, there must be an accompanying change in refinery technology. This means a movement from conventional means of refining heavy feedstocks using (typically) coking technologies to more innovative processes that will coax the last drips of liquid fuels from the feedstock. This book presents the evolution of refinery processes during the last century and as well as the means by which refinery processes will evolve during the next three-to-five decades. Chapters contain material relevant to (1) comparisons of current feedstocks with heavy oil and bio-feedstocks; (2) evolution of refineries since the 1950s, (3) properties and refinability of heavy oil and bio-feedstocks, (4) thermal processes vs. hydroprocesses, and (5) evolution of products to match the environmental market. Process innovations that have influenced refinery processing over the past three decades are presented, as well as the relevant patents that have the potential for incorporation into future refineries.• Comparison of current feedstocks with heavy oil and bio-feedstocks. • Evolution of refineries over the past three decades. • Properties and refinability of heavy oil and bio-feedstocks. • Thermal processes vs. Hydroprocesses. • Evolution of products to match the environmental market. Investigates the engineering and plant design challenges presented by heavy oil and bio-feedstocks Explores the legislatory and regulatory climate, including increasingly stringent environmental requirements Examines the trade-offs of thermal processes vs. hydroprocesses
Download or read book Petroleum Refining Crude oil petroleum products process flowsheets written by Jean-Pierre Wauquier and published by Editions TECHNIP. This book was released on 1995 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this first volume, the reader will find, collected and condensed, the information needed to characterize, analyze, and evaluate crude oils from different origins and their corresponding petroleum cuts as well. The characteristics and specifications of all the petroleum products along with their simplified process flowsheets are reviewed.Contents: 1. Composition of crude oils and petroleum products. 2. Fractionation and elemental analysis of crude oils and petroleum cuts. 3. Characterization of crude oils and petroleum fractions. 4. Methods for the calculation of hydrocarbon physical properties. 5. Characteristics of petroleum products for energy use (motor fuels - heating fuels). 6. Characteristics of non-fuel petroleum products. 7. Standards and specifications of petroleum products. 8. Evaluation of crude oils. 9. Additives for motor fuels and lubricants. 10. Introduction to refining. Appendices: Principal characteristics of pure components. Principal standard test methods for petroleum products. References. Index.
Download or read book Handbook of Petroleum Processing written by Steven A. Treese and published by Springer. This book was released on 2015-08-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This extensively updated second edition of the already valuable reference targets research chemists and engineers who have chosen a career in the complex and essential petroleum industry, as well as other professionals just entering the industry who seek a comprehensive and accessible resource on petroleum processing. The handbook describes and discusses the key components and processes that make up the petroleum refining industry. Beginning with the basics of crude oils and their nature, it continues with the commercial products derived from refining and with related issues concerning their environmental impact. More in depth coverage of many topics previously covered in the first edition, such as hydraulic fracturing or fracking as it is often termed, help ensure this reference remains a relevant and up-to- date resource. At its core is a complete overview of the processes that make up a modern refinery, plus a brief history of the development of processes. Also described in detail are design techniques, operations and in the case of catalytic units, the chemistry of the reaction routes. These discussions are supported by calculation procedures and examples, which enable readers to use today’s simulation-software packages. The handbook also covers off-sites and utilities, as well as environmental and safety aspects relevant to the industry. The chapter on refinery planning covers both operational planning and the decision making procedures for new or revamped processes. Major equipment used in the industry is reviewed along with details and examples of the process specifications for each. An extensive glossary and dictionary of the terms and expressions used in petroleum refining, plus appendices supplying data such as converging factors and selected crude oil assays, as well as an example of optimizing a refinery configuration using linear programming are all included to aid the reader. The 2nd edition of the Handbook of Petroleum Processing is an indispensable desk reference for chemists and engineers as well as an essential part of the libraries of universities with a chemical engineering faculty and oil refineries and engineering firms performing support functions or construction.
Download or read book Handbook of Petroleum Processing written by David S. J. Jones and published by Springer Science & Business Media. This book was released on 2006-01-11 with total page 1357 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook describes and discusses the features that make up the petroleum refining industry. It begins with a description of the crude oils and their nature, and continues with the saleable products from the refining processes, with a review of the environmental impact. There is a complete overview of the processes that make up the refinery with a brief history of those processes. It also describes design technique, operation, and, in the case of catalytic units, the chemistry of the reaction routes. These discussions are supported by calculation procedures and examples, sufficient to enable input to modern computer simulation packages.
Download or read book Refinery Feedstocks written by James G. Speight and published by CRC Press. This book was released on 2020-10-20 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last several decades, the petroleum industry has experienced significant changes in resource availability, petro-politics, and technological advancements dictated by the changing quality of refinery feedstocks. However, the dependence on fossil fuels as the primary energy source has remained unchanged. Refinery Feedstocks addresses the problems of changing feedstock availability and properties; the refining process; and solids deposition during refining. This book will take the reader through the various steps that are necessary for crude oil evaluation and refining including the potential for the use of coal liquids, shale oil, and non-fossil fuel materials (biomass) as refinery feedstocks. Other features: Describes the various types of crude oil and includes a discussion of extra heavy oil and tar sand bitumen Includes basic properties and specifications of crude oil and the significance in refinery operations This book is a handy reference for engineers, scientists, and students who want an update on crude oil refining and on the direction the industry must take to assure the refinability of various feedstocks and the efficiency of the refining processes in the next fifty years. Non-technical readers, with help from the extensive glossary, will also benefit from reading this book.
Download or read book Petroleum Refining and Oil Well Drilling written by Kenneth F. Olson and published by Nova Science Publishers. This book was released on 2017 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Uncertainties in the social, economic, and natural environment are changing workplace behaviors and are setting new demands, especially laws that govern business and society in general. Chapter One discusses this trend in relation to the oil and gas industry. Chapter Two provides a review on the mechanisms and interactions leading to loss of cement integrity, and presents approaches that have tested successfully under the reservoir condition to enhance the resistance of cements when it is exposed to supercritical CO2. Chapter Three deals with the pollution of surface and groundwater by oil products, i.e., prevention of their spreading, integrated approach to modeling of wastewater treatment plants (WWTP) in an oil refinery, impact assessment of effluent discharge on receiving water and removal of selected oil substances by ozonation and O3/UV processes. Chapter Four gives an overview of the emerging technologies for biomass conversion, hydrocarbon chemistry and sugar and sugar-derivative chemistry. Herein, bio-crude production and characterization; model catalytic cracking, the hydrocracking of ketal-compounds and new results concerning the fluidized catalytic cracking of model ketal-compounds are also described.
Download or read book Corrosion Problems and Solutions in Oil Refining and Petrochemical Industry written by Alec Groysman and published by Springer. This book was released on 2016-10-24 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses corrosion problems and their solutions at facilities in the oil refining and petrochemical industry, including cooling water and boiler feed water units. Further, it describes and analyzes corrosion control actions, corrosion monitoring, and corrosion management. Corrosion problems are a perennial issue in the oil refining and petrochemical industry, as they lead to a deterioration of the functional properties of metallic equipment and harm the environment – both of which need to be protected for the sake of current and future generations. Accordingly, this book examines and analyzes typical and atypical corrosion failure cases and their prevention at refineries and petrochemical facilities, including problems with: pipelines, tanks, furnaces, distillation columns, absorbers, heat exchangers, and pumps. In addition, it describes naphthenic acid corrosion, stress corrosion cracking, hydrogen damages, sulfidic corrosion, microbiologically induced corrosion, erosion-corrosion, and corrosion fatigue occurring at refinery units. At last, fouling, corrosion and cleaning are discussed in this book.
